[PATCH 4/5] mach-mmp: PXA168: support multiple SD controllers
Philip Rakity
prakity at marvell.com
Mon Feb 14 01:53:02 EST 2011
Subject: [PATCH 4/5] mach-mmp: PXA168: support multiple SD controllers
add support for pxa168 family for multiple sd controllers
move board specific settings from mfp-pxa168.h to aspenite.c
Signed-off-by: Philip Rakity <prakity at marvell.com>
---
arch/arm/mach-mmp/aspenite.c | 61 +++++++++++++++++++++++++++
arch/arm/mach-mmp/include/mach/mfp-pxa168.h | 24 ++++++++++
arch/arm/mach-mmp/include/mach/pxa168.h | 30 +++++++++++++
arch/arm/mach-mmp/pxa168.c | 36 ++++++++++++++++
4 files changed, 151 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 06b5fa8..74914c4 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -27,6 +27,7 @@
#include <video/pxa168fb.h>
#include <linux/input.h>
#include <plat/pxa27x_keypad.h>
+#include <plat/sdhci.h>
#include "common.h"
@@ -109,6 +110,41 @@ static unsigned long common_pin_config[] __initdata = {
GPIO121_KP_MKIN4,
};
+static unsigned long mmc1_pin_config[] __initdata = {
+ GPIO51_MMC1_DAT3 | MFP_DRIVE_FAST,
+ GPIO52_MMC1_DAT2 | MFP_DRIVE_FAST,
+ GPIO40_MMC1_DAT1 | MFP_DRIVE_FAST,
+ GPIO41_MMC1_DAT0 | MFP_DRIVE_FAST,
+ GPIO49_MMC1_CMD | MFP_DRIVE_FAST,
+ GPIO43_MMC1_CLK | MFP_DRIVE_FAST,
+ GPIO53_MMC1_CD | MFP_DRIVE_FAST,
+ GPIO46_MMC1_WP | MFP_DRIVE_FAST,
+};
+
+static unsigned long mmc2_pin_config[] __initdata = {
+ GPIO90_MMC2_DAT3 | MFP_DRIVE_FAST,
+ GPIO91_MMC2_DAT2 | MFP_DRIVE_FAST,
+ GPIO92_MMC2_DAT1 | MFP_DRIVE_FAST,
+ GPIO93_MMC2_DAT0 | MFP_DRIVE_FAST,
+ GPIO94_MMC2_CMD | MFP_DRIVE_FAST,
+ GPIO95_MMC2_CLK | MFP_DRIVE_FAST,
+};
+
+#ifdef CONFIG_ASPENITE_MMC3
+static unsigned long mmc3_pin_config[] __initdata = {
+ GPIO0_MMC3_DAT7 | MFP_DRIVE_FAST,
+ GPIO1_MMC3_DAT6 | MFP_DRIVE_FAST,
+ GPIO2_MMC3_DAT5 | MFP_DRIVE_FAST,
+ GPIO3_MMC3_DAT4 | MFP_DRIVE_FAST,
+ GPIO4_MMC3_DAT3 | MFP_DRIVE_FAST,
+ GPIO5_MMC3_DAT2 | MFP_DRIVE_FAST,
+ GPIO6_MMC3_DAT1 | MFP_DRIVE_FAST,
+ GPIO7_MMC3_DAT0 | MFP_DRIVE_FAST,
+ GPIO8_MMC3_CLK | MFP_DRIVE_FAST,
+ GPIO9_MMC3_CMD | MFP_DRIVE_FAST,
+};
+#endif
+
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
@@ -220,6 +256,21 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
.debounce_interval = 30,
};
+static struct sdhci_pxa_platdata pxa168_sdh_platdata_mmc1 = {
+};
+
+static struct sdhci_pxa_platdata pxa168_sdh_platdata_mmc2 = {
+ .max_speed = 24000000,
+ .flags = PXA_FLAG_CARD_PERMANENT,
+};
+
+#ifdef CONFIG_ASPENITE_MMC3
+static struct sdhci_pxa_platdata pxa168_sdh_platdata_mmc3 = {
+ .flags = PXA_FLAG_CARD_PERMANENT |
+ PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
+};
+#endif
+
static void __init common_init(void)
{
mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -232,6 +283,16 @@ static void __init common_init(void)
pxa168_add_fb(&aspenite_lcd_info);
pxa168_add_keypad(&aspenite_keypad_info);
+ mfp_config(ARRAY_AND_SIZE(mmc1_pin_config));
+ pxa168_add_sdhost(0, &pxa168_sdh_platdata_mmc1); /* SD Slot */
+
+ mfp_config(ARRAY_AND_SIZE(mmc2_pin_config));
+ pxa168_add_sdhost(1, &pxa168_sdh_platdata_mmc2); /* Wifi */
+#ifdef CONFIG_ASPENITE_MMC3
+ mfp_config(ARRAY_AND_SIZE(mmc3_pin_config));
+ pxa168_add_sdhost(2, &pxa168_sdh_platdata_mmc3); /* eMMC */
+#endif
+
/* off-chip devices */
platform_device_register(&smc91x_device);
}
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 4621067..2600dcb 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -210,6 +210,7 @@
#define GPIO112_UART1_DCD MFP_CFG(GPIO112, AF2)
/* MMC1 */
+/* PULL and DRIVE are functions of the board */
#define GPIO37_MMC1_DAT7 MFP_CFG(GPIO37, AF1)
#define GPIO38_MMC1_DAT6 MFP_CFG(GPIO38, AF1)
#define GPIO54_MMC1_DAT5 MFP_CFG(GPIO54, AF1)
@@ -223,6 +224,29 @@
#define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1)
#define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1)
+/*MMC2*/
+/* PULL and DRIVE are functions of the board */
+#define GPIO90_MMC2_DAT3 MFP_CFG(GPIO90, AF1)
+#define GPIO91_MMC2_DAT2 MFP_CFG(GPIO91, AF1)
+#define GPIO92_MMC2_DAT1 MFP_CFG(GPIO92, AF1)
+#define GPIO93_MMC2_DAT0 MFP_CFG(GPIO93, AF1)
+#define GPIO94_MMC2_CMD MFP_CFG(GPIO94, AF1)
+#define GPIO95_MMC2_CLK MFP_CFG(GPIO95, AF1)
+
+/* MMC3*/
+/* PULL and DRIVE are functions of the board */
+#define GPIO0_MMC3_DAT7 MFP_CFG(GPIO0, AF6)
+#define GPIO1_MMC3_DAT6 MFP_CFG(GPIO1, AF6)
+#define GPIO2_MMC3_DAT5 MFP_CFG(GPIO2, AF6)
+#define GPIO3_MMC3_DAT4 MFP_CFG(GPIO3, AF6)
+#define GPIO4_MMC3_DAT3 MFP_CFG(GPIO4, AF6)
+#define GPIO5_MMC3_DAT2 MFP_CFG(GPIO5, AF6)
+#define GPIO6_MMC3_DAT1 MFP_CFG(GPIO6, AF6)
+#define GPIO7_MMC3_DAT0 MFP_CFG(GPIO7, AF6)
+#define GPIO8_MMC3_CLK MFP_CFG(GPIO8, AF6)
+#define GPIO9_MMC3_CMD MFP_CFG(GPIO9, AF6)
+#define GPIO16_SMC_nCS0_DIS MFP_CFG(GPIO16, AF0)
+
/* LCD */
#define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1)
#define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1)
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 1801e42..2b84dea 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -14,6 +14,7 @@ extern void pxa168_clear_keypad_wakeup(void);
#include <video/pxa168fb.h>
#include <plat/pxa27x_keypad.h>
#include <mach/cputype.h>
+#include <plat/sdhci.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
@@ -31,6 +32,11 @@ extern struct pxa_device_desc pxa168_device_ssp5;
extern struct pxa_device_desc pxa168_device_nand;
extern struct pxa_device_desc pxa168_device_fb;
extern struct pxa_device_desc pxa168_device_keypad;
+extern struct pxa_device_desc pxa168_device_sdh0;
+extern struct pxa_device_desc pxa168_device_sdh1;
+extern struct pxa_device_desc pxa168_device_sdh2;
+extern struct pxa_device_desc pxa168_device_sdh3;
+
static inline int pxa168_add_uart(int id)
{
@@ -99,6 +105,30 @@ static inline int pxa168_add_ssp(int id)
return pxa_register_device(d, NULL, 0);
}
+static inline int pxa168_add_sdhost(int id, struct sdhci_pxa_platdata *data)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 0:
+ d = &pxa168_device_sdh0;
+ break;
+ case 1:
+ d = &pxa168_device_sdh1;
+ break;
+ case 2:
+ d = &pxa168_device_sdh2;
+ break;
+ case 3:
+ d = &pxa168_device_sdh3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return pxa_register_device(d, data, sizeof(*data));
+}
+
static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
{
return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 72b4e76..d769d4a 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -63,6 +63,30 @@ void __init pxa168_init_irq(void)
pxa168_init_gpio();
}
+static void sdhc_clk_enable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst |= clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void sdhc_clk_disable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst &= ~clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+struct clkops sdhc_clk_ops = {
+ .enable = sdhc_clk_enable,
+ .disable = sdhc_clk_disable,
+};
+
+
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
@@ -81,6 +105,10 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
static APMU_CLK(nand, NAND, 0x01db, 208000000);
static APMU_CLK(lcd, LCD, 0x7f, 312000000);
+static APMU_CLK_OPS(sdh0, PXA168_SDH0, 0x1b, 48000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh1, PXA168_SDH1, 0x1b, 48000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh2, PXA168_SDH2, 0x1b, 48000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh3, PXA168_SDH3, 0x1b, 48000000, &sdhc_clk_ops);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
@@ -100,6 +128,10 @@ static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_sdh0, "sdhci-pxa.0", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh1, "sdhci-pxa.1", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh2, "sdhci-pxa.2", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh3, "sdhci-pxa.3", "PXA-SDHCLK"),
};
static int __init pxa168_init(void)
@@ -163,3 +195,7 @@ PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
+PXA168_DEVICE(sdh0, "sdhci-pxa", 0, SDH1, 0xd4280000, 0x100);
+PXA168_DEVICE(sdh1, "sdhci-pxa", 1, SDH1, 0xd4281000, 0x100);
+PXA168_DEVICE(sdh2, "sdhci-pxa", 2, SDH2, 0xd427e000, 0x100);
+PXA168_DEVICE(sdh3, "sdhci-pxa", 3, SDH2, 0xd427f000, 0x100);
--
1.7.0.4
More information about the linux-arm-kernel
mailing list