[PATCH 2/6] gumstix: switch to using gpio-vbus transceiver

Dmitry Eremin-Solenikov dbaryshkov at gmail.com
Wed Feb 2 11:59:59 EST 2011


Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
Cc: Steve Sakoman <sakoman at gmail.com>
---
 arch/arm/mach-pxa/gumstix.c |   13 +++++++++++--
 1 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1e2a9a1..c74d7c1 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -106,14 +107,22 @@ static void __init gumstix_mmc_init(void)
 #endif
 
 #ifdef CONFIG_USB_GADGET_PXA25X
-static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
+static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
 };
 
+static struct platform_device gumstix_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gumstix_udc_info,
+	},
+};
+
 static void __init gumstix_udc_init(void)
 {
-	pxa_set_udc_info(&gumstix_udc_info);
+	platform_device_register(&gumstix_gpio_vbus);
 }
 #else
 static void gumstix_udc_init(void)
-- 
1.7.2.3




More information about the linux-arm-kernel mailing list