[PATCH v2] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration

[Richard Zhao]

On Fri, Feb 11, 2011 at 02:05:21PM +0100, Lothar Waßmann wrote:
> Hi,
> 
> Richard Zhao writes:
> > Hi Julien,
> > 
> > #define _MX51_PAD_USBH1_DATA2__UART2_TXD	IOMUX_PAD(0x690, 0x290, 1, 0x09ec, 5, 0)
> > 
> > Will you change the above line too?
> > 
> Seems like a general copy/paste error in the i.MX51 Ref Manual.
> For all pads that can have an UART RXD or TXD function the manual
> states that the UART*_IPP_UART_RXD_MUX_SELECT_INPUT register must be
> configured, while this is obviously only sensible for the RXD
> function.
Yes, it's for RXD. RXD can also select input from TXD.

Thanks
Richard
> 
> 
> Lothar Waßmann
> -- 
> ___________________________________________________________
> 
> Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
> Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
> Geschäftsführer: Matthias Kaussen
> Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
> 
> www.karo-electronics.de | info at karo-electronics.de
> ___________________________________________________________