[PATCH v2] i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD declaration

[Lothar Waßmann]

Hi,

Richard Zhao writes:
> Hi Julien,
> 
> #define _MX51_PAD_USBH1_DATA2__UART2_TXD	IOMUX_PAD(0x690, 0x290, 1, 0x09ec, 5, 0)
> 
> Will you change the above line too?
> 
Seems like a general copy/paste error in the i.MX51 Ref Manual.
For all pads that can have an UART RXD or TXD function the manual
states that the UART*_IPP_UART_RXD_MUX_SELECT_INPUT register must be
configured, while this is obviously only sensible for the RXD
function.


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________