[[PATCH 1/4] arm: mach-mmp: Fix Kconfig to allow correct PXA Selections

Philip Rakity prakity at marvell.com
Mon Feb 14 01:43:17 EST 2011


The following items are fixed:

a) inconsistent behavior when board is selected and if
menu item is reselected board has disappeard

b) Ability to select options that will not build
	MMP2 and say PXA168

The behavior maps what is done by the mach-omap
(thanks to Anrd Bergmann for his help and suggestions)

Mach-MMP is (as now) the sytem type.  Once selected
the user can then select the SoC on the board and
only the boards that support that SoC are shown.

Signed-off-by: Philip Rakity <prakity at marvell.com>
---
 arch/arm/mach-mmp/Kconfig |   96 ++++++++++++++++++++++-----------------------
 1 files changed, 47 insertions(+), 49 deletions(-)

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 67793a6..4739d27 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,99 +1,97 @@
 if ARCH_MMP
 
-menu "Marvell PXA168/910/MMP2 Implmentations"
+menu "Marvell PXA168/PXA910/MMP2 Specific Features"
+
+choice
+	prompt "SoC (System on Chip)"
+	help
+	  Type of System on Chip (SoC) used
+
+config CPU_PXA168
+	bool "PXA168 Based System"
+	select CPU_MOHAWK
+	help
+	  Say 'Y' here if System has a Marvell PXA168 SoC
+
+config CPU_PXA910
+	bool "PXA910 Based System"
+	select CPU_MOHAWK
+	help
+	  Say 'Y' here if System has a Marvell PXA910 SoC
+
+config CPU_MMP2
+	bool "MMP2 Based System"
+	select CPU_PJ4
+	help
+	  Say 'Y' here if System has a Marvell MMP2 SoC
+
+endchoice
+
+comment "Development Board"
 
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
-	select CPU_PXA168
+	depends on CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Aspenite Development Board.
 
 config MACH_ZYLONITE2
 	bool "Marvell's PXA168 Zylonite2 Development Board"
-	select CPU_PXA168
+	depends on CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Zylonite2 Development Board.
 
 config MACH_AVENGERS_LITE
 	bool "Marvell's PXA168 Avengers Lite Development Board"
-	select CPU_PXA168
+	depends on CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Avengers Lite Development Board.
 
+config MACH_TETON_BGA
+	bool "Marvell's PXA168 Teton BGA Development Board"
+	depends on CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Teton BGA Development Board.
+
 config MACH_TAVOREVB
 	bool "Marvell's PXA910 TavorEVB Development Board"
-	select CPU_PXA910
+	depends on CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
 	  TavorEVB Development Board.
 
 config MACH_TTC_DKB
-	bool "Marvell's PXA910 TavorEVB Development Board"
-	select CPU_PXA910
+	bool "Marvell's PXA910 TTC DKB Development Board"
+	depends on CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
 	  TTC_DKB Development Board.
 
 config MACH_BROWNSTONE
 	bool "Marvell's Brownstone Development Platform"
-	depends on !CPU_MOHAWK
-	select CPU_MMP2
+	depends on CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Brown Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
+	  Brownstone Development Board.
 
 config MACH_FLINT
 	bool "Marvell's Flint Development Platform"
-	depends on !CPU_MOHAWK
-	select CPU_MMP2
+	depends on CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Flint Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
+	  Flint Development Board.
 
 config MACH_MARVELL_JASPER
 	bool "Marvell's Jasper Development Platform"
-	depends on !CPU_MOHAWK
-	select CPU_MMP2
+	depends on CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-base
-	  Jasper Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_TETON_BGA
-	bool "Marvell's PXA168 Teton BGA Development Board"
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Teton BGA Development Board.
+	  Jasper Development Board.
 
 endmenu
 
-config CPU_PXA168
-	bool
-	select CPU_MOHAWK
-	help
-	  Select code specific to PXA168
-
-config CPU_PXA910
-	bool
-	select CPU_MOHAWK
-	help
-	  Select code specific to PXA910
-
-config CPU_MMP2
-	bool
-	select CPU_PJ4
-	help
-	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 endif
-- 
1.7.0.4





More information about the linux-arm-kernel mailing list