[PATCH v2 04/28] ARM: mm: cache-l2x0: Add support forre-enabling l2x0

[Santosh Shilimkar]

> -----Original Message-----
> From: Russell King - ARM Linux [mailto:linux at arm.linux.org.uk]
> Sent: Saturday, February 05, 2011 3:18 PM
> To: Santosh Shilimkar
> Cc: Colin Cross; Will Deacon; Catalin Marinas; Linus Walleij;
> konkers at android.com; Tony Lindgren; linux-kernel at vger.kernel.org;
> linux-tegra at vger.kernel.org; olof at lixom.net; linux-arm-
> kernel at lists.infradead.org
> Subject: Re: [PATCH v2 04/28] ARM: mm: cache-l2x0: Add support
> forre-enabling l2x0
>
> On Sat, Feb 05, 2011 at 01:21:24PM +0530, Santosh Shilimkar wrote:
> > GIC save/restore on OMAP follows different strategy. There is a
> > Predefined layout to save content and restore is done atomically
> > by boot ROM code.
> > L2 cache also same case. Only AUXCTRL needs to be programmed on
> > wakeup from low power mode and that too with secure call. Rest
> > of the registers are managed by boot ROM code.
> >
> > TWD is already managed through framework. Othe CPU low power
> > sequence is very small and OMAP has restrictions on the last
> > core to go down and first to wakeup.
> >
> > So at least I don't see any use of common notifiers for GIC
> > and L2 will help OMAP lower power code.
>
> What this means is that we're going to end up littering things like
> GIC
> and other stuff with lots of individual SoC specific code to save
> state
> into individual SoC specific structures.  This is not sane, and
> we're
> not going to corrupt generic code with SoC specific code.

Fully agree and hence flagged it early.

Regards,
Santosh