[PATCH] arm: mach-at91: remove double-semicolons

[Sylvain Calador]

Remove double-semicolons.

Signed-off-by: Sylvain Calador <sylvain.calador at gmail.com>
---
 arch/arm/mach-at91/at91cap9_devices.c    |    2 +-
 arch/arm/mach-at91/at91sam9g45_devices.c |    2 +-
 arch/arm/mach-at91/at91sam9rl_devices.c  |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index d1f775e..308ce7a 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -171,7 +171,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 	 */
 	usba_udc_data.pdata.vbus_pin = -EINVAL;
 	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
 	if (data && data->vbus_pin > 0) {
 		at91_set_gpio_input(data->vbus_pin, 0);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 1e8f275..5e9f8a4 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -256,7 +256,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 {
 	usba_udc_data.pdata.vbus_pin = -EINVAL;
 	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
 	if (data && data->vbus_pin > 0) {
 		at91_set_gpio_input(data->vbus_pin, 0);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 53aaa94..c49262b 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -145,7 +145,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 	 */
 	usba_udc_data.pdata.vbus_pin = -EINVAL;
 	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
 	if (data && data->vbus_pin > 0) {
 		at91_set_gpio_input(data->vbus_pin, 0);
-- 
1.7.0.4