[PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT
Kukjin Kim
kgene.kim at samsung.com
Mon Feb 28 00:16:47 EST 2011
From: Changhwan Youn <chaos.youn at samsung.com>
The Multi-Core Timer(MCT) of EXYNOS4 is designed for implementing
clock source timer and clock event timers. This patch implements
1 clock source timer with 64 bit free running counter of MCT and
2 clock event timers with two of 31-bit tick counters.
Signed-off-by: Changhwan Youn <chaos.youn at samsung.com>
Cc: Ben Dooks <ben-linux at fluff.org>
Cc: Russell King <rmk+kernel at arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
---
Changes since v3:
- Re-worked based on exynos4
- Changed member of clock_evetn_device like following
struct mct_clock_event_device {
struct clock_event_device *evt;
...
- Address comments from Russell King
Added static into "irqreturn_t exynos4_mct_comp_isr()"
Added .dev_id member into "struct irqaction mct_comp_event_irq"
Changes since v2:
- Addressed comments from Russell King
Added mct_clock_event_device structure
- Removed suspend()/resume() which are not used now
Changes since v1:
- Addressed comments from Russell King
(implemented global timer, used local timer and so on)
- Fixed small things
arch/arm/Kconfig | 2 +-
arch/arm/mach-exynos4/Kconfig | 5 +
arch/arm/mach-exynos4/Makefile | 11 +-
arch/arm/mach-exynos4/include/mach/regs-mct.h | 52 +++
arch/arm/mach-exynos4/mct.c | 421 +++++++++++++++++++++++++
5 files changed, 488 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-exynos4/include/mach/regs-mct.h
create mode 100644 arch/arm/mach-exynos4/mct.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ec3bf98..b4db99b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1366,7 +1366,7 @@ config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP
default y
- select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP
+ select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index ad03840..77b5d93 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -15,6 +15,11 @@ config CPU_EXYNOS4210
help
Enable EXYNOS4210 CPU support
+config EXYNOS4_MCT
+ bool "Kernel timer support by MCT"
+ help
+ Use MCT (Multi Core Timer) as kernel timers
+
config EXYNOS4_DEV_PD
bool
help
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 0558235..de20b91 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -13,11 +13,18 @@ obj- :=
# Core support for EXYNOS4 system
obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o time.o gpiolib.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+
+ifeq ($(CONFIG_EXYNOS4_MCT),y)
+obj-y += mct.o
+else
+obj-y += time.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+endif
+
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
# machine support
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h
new file mode 100644
index 0000000..ca9c843
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h
@@ -0,0 +1,52 @@
+/* arch/arm/mach-exynos4/include/mach/regs-mct.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 MCT configutation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_MCT_H
+#define __ASM_ARCH_REGS_MCT_H __FILE__
+
+#include <mach/map.h>
+
+#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x))
+
+#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
+#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
+#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
+
+#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
+#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
+#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
+
+#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
+
+#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
+#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
+#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
+
+#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400)
+
+#define MCT_L_TCNTB_OFFSET (0x00)
+#define MCT_L_ICNTB_OFFSET (0x08)
+#define MCT_L_TCON_OFFSET (0x20)
+#define MCT_L_INT_CSTAT_OFFSET (0x30)
+#define MCT_L_INT_ENB_OFFSET (0x34)
+#define MCT_L_WSTAT_OFFSET (0x40)
+
+#define MCT_G_TCON_START (1 << 8)
+#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
+#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
+
+#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
+#define MCT_L_TCON_INT_START (1 << 1)
+#define MCT_L_TCON_TIMER_START (1 << 0)
+
+#endif /* __ASM_ARCH_REGS_MCT_H */
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
new file mode 100644
index 0000000..6bb4b50
--- /dev/null
+++ b/arch/arm/mach-exynos4/mct.c
@@ -0,0 +1,421 @@
+/* linux/arch/arm/mach-exynos4/mct.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 MCT(Multi-Core Timer) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/percpu.h>
+
+#include <mach/map.h>
+#include <mach/regs-mct.h>
+#include <asm/mach/time.h>
+
+static unsigned long clk_cnt_per_tick;
+static unsigned long clk_rate;
+
+struct mct_clock_event_device {
+ struct clock_event_device *evt;
+ void __iomem *base;
+};
+
+struct mct_clock_event_device mct_tick[2];
+
+static void exynos4_mct_write(unsigned int value, void *addr)
+{
+ void __iomem *stat_addr;
+ u32 mask;
+ u32 i;
+
+ __raw_writel(value, addr);
+
+ switch ((u32) addr) {
+ case (u32) EXYNOS4_MCT_G_TCON:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 16; /* G_TCON write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_L:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 0; /* G_COMP0_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_U:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 1; /* G_COMP0_U write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 2; /* G_COMP0_ADD_INCR write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_L:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 0; /* G_CNT_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_U:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 1; /* G_CNT_U write status */
+ break;
+ case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
+ stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 3; /* L0_TCON write status */
+ break;
+ case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
+ stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 3; /* L1_TCON write status */
+ break;
+ case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
+ stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 0; /* L0_TCNTB write status */
+ break;
+ case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
+ stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 0; /* L1_TCNTB write status */
+ break;
+ case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
+ stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 1; /* L0_ICNTB write status */
+ break;
+ case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
+ stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 1; /* L1_ICNTB write status */
+ break;
+ default:
+ return;
+ }
+
+ /* Wait maximum 1 ms until written values are applied */
+ for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
+ if (__raw_readl(stat_addr) & mask) {
+ __raw_writel(mask, stat_addr);
+ return;
+ }
+
+ panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr);
+}
+
+/* Clocksource handling */
+static void exynos4_mct_frc_start(u32 hi, u32 lo)
+{
+ u32 reg;
+
+ exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
+ exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
+
+ reg = __raw_readl(EXYNOS4_MCT_G_TCON);
+ reg |= MCT_G_TCON_START;
+ exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
+}
+
+static cycle_t exynos4_frc_read(struct clocksource *cs)
+{
+ unsigned int lo, hi;
+ u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+
+ do {
+ hi = hi2;
+ lo = __raw_readl(EXYNOS4_MCT_G_CNT_L);
+ hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+ } while (hi != hi2);
+
+ return ((cycle_t)hi << 32) | lo;
+}
+
+struct clocksource mct_frc = {
+ .name = "mct-frc",
+ .rating = 400,
+ .read = exynos4_frc_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init exynos4_clocksource_init(void)
+{
+ exynos4_mct_frc_start(0, 0);
+
+ if (clocksource_register_hz(&mct_frc, clk_rate))
+ panic("%s: can't register clocksource\n", mct_frc.name);
+}
+
+static void exynos4_mct_comp0_stop(void)
+{
+ unsigned int tcon;
+
+ tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+ tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
+
+ exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
+ exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
+}
+
+static void exynos4_mct_comp0_start(enum clock_event_mode mode,
+ unsigned long cycles)
+{
+ unsigned int tcon;
+ cycle_t comp_cycle;
+
+ tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+
+ if (mode == CLOCK_EVT_MODE_PERIODIC) {
+ tcon |= MCT_G_TCON_COMP0_AUTO_INC;
+ exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
+ }
+
+ comp_cycle = exynos4_frc_read(&mct_frc) + cycles;
+ exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L);
+ exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U);
+
+ exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB);
+
+ tcon |= MCT_G_TCON_COMP0_ENABLE;
+ exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON);
+}
+
+static int exynos4_comp_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ exynos4_mct_comp0_start(evt->mode, cycles);
+
+ return 0;
+}
+
+static void exynos4_comp_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ exynos4_mct_comp0_stop();
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ exynos4_mct_comp0_start(mode, clk_cnt_per_tick);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device mct_comp_device = {
+ .name = "mct-comp",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 250,
+ .set_next_event = exynos4_comp_set_next_event,
+ .set_mode = exynos4_comp_set_mode,
+};
+
+static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mct_comp_event_irq = {
+ .name = "mct_comp_irq",
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = exynos4_mct_comp_isr,
+ .dev_id = &mct_comp_device,
+};
+
+static void exynos4_clockevent_init(void)
+{
+ clk_cnt_per_tick = clk_rate / 2 / HZ;
+
+ clockevents_calc_mult_shift(&mct_comp_device, clk_rate / 2, 5);
+ mct_comp_device.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &mct_comp_device);
+ mct_comp_device.min_delta_ns =
+ clockevent_delta2ns(0xf, &mct_comp_device);
+ mct_comp_device.cpumask = cpumask_of(0);
+ clockevents_register_device(&mct_comp_device);
+
+ setup_irq(IRQ_MCT_G0, &mct_comp_event_irq);
+}
+
+#ifdef CONFIG_LOCAL_TIMERS
+/* Clock event handling */
+static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
+{
+ unsigned long tmp;
+ unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
+ void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET;
+
+ tmp = __raw_readl(addr);
+ if (tmp & mask) {
+ tmp &= ~mask;
+ exynos4_mct_write(tmp, addr);
+ }
+}
+
+static void exynos4_mct_tick_start(unsigned long cycles,
+ struct mct_clock_event_device *mevt)
+{
+ unsigned long tmp;
+
+ exynos4_mct_tick_stop(mevt);
+
+ tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */
+
+ /* update interrupt count buffer */
+ exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
+
+ /* enable MCT tick interupt */
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
+
+ tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
+ tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
+ MCT_L_TCON_INTERVAL_MODE;
+ exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
+}
+
+static int exynos4_tick_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()];
+
+ exynos4_mct_tick_start(cycles, mevt);
+
+ return 0;
+}
+
+static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()];
+
+ exynos4_mct_tick_stop(mevt);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ exynos4_mct_tick_start(clk_cnt_per_tick, mevt);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+ struct mct_clock_event_device *mevt = dev_id;
+ struct clock_event_device *evt = mevt->evt;
+
+ /*
+ * This is for supporting oneshot mode.
+ * Mct would generate interrupt periodically
+ * without explicit stopping.
+ */
+ if (evt->mode != CLOCK_EVT_MODE_PERIODIC)
+ exynos4_mct_tick_stop(mevt);
+
+ /* Clear the MCT tick interrupt */
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mct_tick0_event_irq = {
+ .name = "mct_tick0_irq",
+ .flags = IRQF_TIMER | IRQF_NOBALANCING,
+ .handler = exynos4_mct_tick_isr,
+};
+
+static struct irqaction mct_tick1_event_irq = {
+ .name = "mct_tick1_irq",
+ .flags = IRQF_TIMER | IRQF_NOBALANCING,
+ .handler = exynos4_mct_tick_isr,
+};
+
+static void exynos4_mct_tick_init(struct clock_event_device *evt)
+{
+ unsigned int cpu = smp_processor_id();
+
+ mct_tick[cpu].evt = evt;
+
+ if (cpu == 0) {
+ mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
+ evt->name = "mct_tick0";
+ } else {
+ mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
+ evt->name = "mct_tick1";
+ }
+
+ evt->cpumask = cpumask_of(cpu);
+ evt->set_next_event = exynos4_tick_set_next_event;
+ evt->set_mode = exynos4_tick_set_mode;
+ evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ evt->rating = 450;
+
+ clockevents_calc_mult_shift(evt, clk_rate / 2, 5);
+ evt->max_delta_ns =
+ clockevent_delta2ns(0x7fffffff, evt);
+ evt->min_delta_ns =
+ clockevent_delta2ns(0xf, evt);
+
+ clockevents_register_device(evt);
+
+ exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
+
+ if (cpu == 0) {
+ mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+ setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ } else {
+ mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+ irq_set_affinity(IRQ_MCT1, cpumask_of(1));
+ setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+ }
+}
+
+/* Setup the local clock events for a CPU */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ exynos4_mct_tick_init(evt);
+}
+
+int local_timer_ack(void)
+{
+ return 0;
+}
+
+#endif /* CONFIG_LOCAL_TIMERS */
+
+static void __init exynos4_timer_resources(void)
+{
+ struct clk *mct_clk;
+ mct_clk = clk_get(NULL, "xtal");
+
+ clk_rate = clk_get_rate(mct_clk);
+}
+
+static void __init exynos4_timer_init(void)
+{
+ exynos4_timer_resources();
+ exynos4_clocksource_init();
+ exynos4_clockevent_init();
+}
+
+struct sys_timer exynos4_timer = {
+ .init = exynos4_timer_init,
+};
--
1.7.1
More information about the linux-arm-kernel
mailing list