[PATCH v6 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion

[Kevin Hilman]

"Govindraj.R" <govindraj.raja at ti.com> writes:

> Changes invloves:
> ----------------
> 1) Addition of hwmod data for omap2/3/4.
> 2) McSPI driver hwmod adaptation with cleanup of base address
>    macros and using omap-device API's.
> 3) Runtime Conversion of McSPI driver.
>
> Changes from v5:
> ---------------
> Rebased on top of 2.6.38-rc3 as per Kevin's comments.
> http://www.spinics.net/lists/arm-kernel/msg112112.html

Thanks.

Reviewed-by: Kevin Hilman <khilman at ti.com>


> Changes from v4:

> 1) 4430 hwmod file alignment based on Benoit's comments.
>    http://www.spinics.net/lists/arm-kernel/msg111215.html
>    4430 Hwmod file now aligned based on:
>    http://gitorious.org/omap-pm/linux/blobs/pm-wip/
>    hwmods-omap4-full/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
>
> Changes from v3:
> ---------------
> 1) Updated proper Author for all patches which was missed
>    in v2. 
> 2) Modified 4430 hwmod data file so that mcspi data gets
>    updated in proper alphabetical order.
> 3) Update omap2/3 hwmod dat files with SYSS_HAS_RESET_STATUS
>    flag.
>
> Changes from v2:
> ---------------
> 1) Fixing minor comments and adding ack from Grant Likely.
> 	https://patchwork.kernel.org/patch/371321/
> 	https://patchwork.kernel.org/patch/371331/
>
> Changes from v1:
> ---------------
> 1) Fixing patch 5/5 comments for hwmod+runtime
>   Split the patch 5/5 to hwmod adaptation
>   and then runtime conversion
>   http://www.mail-archive.com/linux-omap@vger.kernel.org/msg33387.html
>
> Testing Updates:
> ----------------
> Was tested using data transfer test module available at:
> http://dev.omapzoom.org/?p=richo/device_driver_test.git;a=blob;f=mcspi/test_code/
> utils/mcspi_modules/omap_mcspi_datatest.c;
> h=e42ec10c5c844abdde6a7175a268b379fbbdb655;
> hb=5d9a755d50e58de861c5e8991f2f607bc49b5dc3
> This test basically involves MISO <--> MOSI lines looped and data transfer test
> done using the above test module.
> System wide suspend and ret/off counts observation, ensured that no behavioral
> difference with and without this patch series.
>
> Testing procedure involves:
> ---------------------------
> Loopback test based on SPI interface available from
> board expansion connector.
> MISO <---> MOSI
>
> Platforms used where:
> --------------------
> Using the above mentioned test module we had done some
> data transfer tests.
> 1) OMAP2430 SDP.
> 2) OMAP3 (OMAP3430/3630SDP, ZOOM boards zoom2/3).
> 3) OMAP4430 SDP.
>    [Along with loopback test basic Ethernet functionality
>    was checked which is over SPI interface].
>    Blaze-Board(OMAP4430) Boot tested with ethernet interface.
> 4) Boot tested on 2420/n800.
>
> Benoit Cousson (1):
>   OMAP4: hwmod data: Add McSPI
>
> Charulatha V (4):
>   OMAP2420: hwmod data: Add McSPI
>   OMAP2430: hwmod data: Add McSPI
>   OMAP3: hwmod data: Add McSPI
>   OMAP: devices: Modify McSPI device to adapt to hwmod framework
>
> Govindraj.R (1):
>   OMAP: runtime: McSPI driver runtime conversion
>
>  arch/arm/mach-omap2/devices.c              |  187 ++++---------------
>  arch/arm/mach-omap2/omap_hwmod_2420_data.c |  156 ++++++++++++++++
>  arch/arm/mach-omap2/omap_hwmod_2430_data.c |  219 ++++++++++++++++++++++
>  arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |  280 ++++++++++++++++++++++++++++
>  arch/arm/mach-omap2/omap_hwmod_44xx_data.c |  267 ++++++++++++++++++++++++++
>  arch/arm/plat-omap/include/plat/mcspi.h    |   11 +
>  drivers/spi/omap2_mcspi.c                  |  220 +++++++---------------
>  7 files changed, 1040 insertions(+), 300 deletions(-)