[PATCH] ARM: EXYNOS4: Adds Samsung NURI board support
Minkyu Kang
mk7.kang at samsung.com
Fri Feb 25 03:43:36 EST 2011
This patch adds Samsung NURI board support.
Signed-off-by: Minkyu Kang <mk7.kang at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
This patch is base on next-exynos4 branch at kgene tree.
arch/arm/configs/exynos4_defconfig | 1 +
arch/arm/mach-exynos4/Kconfig | 15 +++
arch/arm/mach-exynos4/Makefile | 1 +
arch/arm/mach-exynos4/mach-nuri.c | 233 ++++++++++++++++++++++++++++++++++++
4 files changed, 250 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-exynos4/mach-nuri.c
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index 2ffba24..fd92324 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -9,6 +9,7 @@ CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC210=y
CONFIG_MACH_SMDKV310=y
CONFIG_MACH_UNIVERSAL_C210=y
+CONFIG_MACH_NURI=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index ad03840..5bf00b9 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -123,6 +123,21 @@ config MACH_UNIVERSAL_C210
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
+config MACH_NURI
+ bool "Mobile NURI Board"
+ select CPU_EXYNOS4210
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C5
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C5
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for Samsung Mobile NURI Board.
+
endmenu
comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 0558235..fa9e814 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
+obj-$(CONFIG_MACH_NURI) += mach-nuri.o
# device support
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
new file mode 100644
index 0000000..28010bd
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -0,0 +1,233 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-nuri.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG256 | \
+ S5PV210_UFCON_RXTRIG256)
+
+enum fixed_regulator_id {
+ FIXED_REG_ID_MMC = 0,
+};
+
+static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
+ {
+ .hwport = 0,
+ .ucon = NURI_UCON_DEFAULT,
+ .ulcon = NURI_ULCON_DEFAULT,
+ .ufcon = NURI_UFCON_DEFAULT,
+ },
+ {
+ .hwport = 1,
+ .ucon = NURI_UCON_DEFAULT,
+ .ulcon = NURI_ULCON_DEFAULT,
+ .ufcon = NURI_UFCON_DEFAULT,
+ },
+ {
+ .hwport = 2,
+ .ucon = NURI_UCON_DEFAULT,
+ .ulcon = NURI_ULCON_DEFAULT,
+ .ufcon = NURI_UFCON_DEFAULT,
+ },
+ {
+ .hwport = 3,
+ .ucon = NURI_UCON_DEFAULT,
+ .ulcon = NURI_ULCON_DEFAULT,
+ .ufcon = NURI_UFCON_DEFAULT,
+ },
+};
+
+/* eMMC */
+static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
+ .max_width = 8,
+ .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_DISABLE | MMC_CAP_ERASE),
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply emmc_supplies[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+ REGULATOR_SUPPLY("vmmc", "dw_mmc"),
+};
+
+static struct regulator_init_data emmc_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "VMEM_VDD_2.8V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(emmc_supplies),
+ .consumer_supplies = emmc_supplies,
+};
+
+static struct fixed_voltage_config emmc_fixed_voltage_config = {
+ .supply_name = "MASSMEMORY_EN (inverted)",
+ .microvolts = 2800000,
+ .gpio = EXYNOS4_GPL1(1),
+ .enable_high = false,
+ .init_data = &emmc_fixed_voltage_init_data,
+};
+
+static struct platform_device emmc_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_MMC,
+ .dev = {
+ .platform_data = &emmc_fixed_voltage_config,
+ },
+};
+
+/* SD */
+static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
+ .max_width = 4,
+ .host_caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_DISABLE,
+ .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */
+ .ext_cd_gpio_invert = 1,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* WLAN */
+static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
+ .max_width = 4,
+ .host_caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+ .cd_type = S3C_SDHCI_CD_EXTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static void __init nuri_sdhci_init(void)
+{
+ s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
+ s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
+ s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
+}
+
+/* GPIO KEYS */
+static struct gpio_keys_button nuri_gpio_keys_tables[] = {
+ {
+ .code = KEY_VOLUMEUP,
+ .gpio = EXYNOS4_GPX2(0), /* XEINT16 */
+ .desc = "gpio-keys: KEY_VOLUMEUP",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_VOLUMEDOWN,
+ .gpio = EXYNOS4_GPX2(1), /* XEINT17 */
+ .desc = "gpio-keys: KEY_VOLUMEDOWN",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_POWER,
+ .gpio = EXYNOS4_GPX2(7), /* XEINT23 */
+ .desc = "gpio-keys: KEY_POWER",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data nuri_gpio_keys_data = {
+ .buttons = nuri_gpio_keys_tables,
+ .nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables),
+};
+
+static struct platform_device nuri_gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &nuri_gpio_keys_data,
+ },
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+ /* Gyro, To be updated */
+};
+
+/* GPIO I2C 5 (PMIC) */
+static struct i2c_board_info i2c5_devs[] __initdata = {
+ /* max8997, To be updated */
+};
+
+static struct platform_device *nuri_devices[] __initdata = {
+ /* Samsung Platform Devices */
+ &emmc_fixed_voltage,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+#ifdef CONFIG_S3C2410_WATCHDOG
+ &s3c_device_wdt,
+#endif
+
+ /* NURI Devices */
+ &nuri_gpio_keys,
+};
+
+static void __init nuri_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
+}
+
+static void __init nuri_machine_init(void)
+{
+ nuri_sdhci_init();
+
+ i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+ i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+
+ /* Last */
+ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
+}
+
+MACHINE_START(NURI, "NURI")
+ /* Maintainer: Kyungmin Park <kyungmin.park at samsung.com> */
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = nuri_map_io,
+ .init_machine = nuri_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
--
1.7.1
More information about the linux-arm-kernel
mailing list