[PATCH v3 3/6] ARM: mxs: dynamically allocate mmc device
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Tue Feb 22 13:33:49 EST 2011
Hello Shawn,
On Tue, Feb 22, 2011 at 08:39:41PM +0800, Shawn Guo wrote:
> On Tue, Feb 22, 2011 at 09:31:13AM +0100, Uwe Kleine-König wrote:
> > On Mon, Feb 21, 2011 at 06:42:56PM +0800, Shawn Guo wrote:
> > > Signed-off-by: Shawn Guo <shawn.guo at freescale.com>
> > > ---
> > > arch/arm/mach-mxs/clock-mx23.c | 16 +++++
> > > arch/arm/mach-mxs/clock-mx28.c | 18 +++++
> > > arch/arm/mach-mxs/devices-mx23.h | 4 +
> > > arch/arm/mach-mxs/devices-mx28.h | 4 +
> > > arch/arm/mach-mxs/devices/Kconfig | 3 +
> > > arch/arm/mach-mxs/devices/Makefile | 1 +
> > > arch/arm/mach-mxs/devices/platform-mmc.c | 77 +++++++++++++++++++++++
> > > arch/arm/mach-mxs/include/mach/devices-common.h | 13 ++++
> > > 8 files changed, 136 insertions(+), 0 deletions(-)
> > > create mode 100644 arch/arm/mach-mxs/devices/platform-mmc.c
> > >
> > > diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
> > > index c19b69a..a1ed5f4 100644
> > > --- a/arch/arm/mach-mxs/clock-mx23.c
> > > +++ b/arch/arm/mach-mxs/clock-mx23.c
> > > @@ -445,6 +445,7 @@ static struct clk_lookup lookups[] = {
> > > _REGISTER_CLOCK("rtc", NULL, rtc_clk)
> > > _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
> > > _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
> > > + _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
> > > _REGISTER_CLOCK(NULL, "usb", usb_clk)
> > > _REGISTER_CLOCK(NULL, "audio", audio_clk)
> > > _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
> > > @@ -515,6 +516,15 @@ static int clk_misc_init(void)
> > > __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
> > > CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
> > >
> > > + /*
> > > + * 480 MHz seems too high to be ssp clock source directly,
> > > + * so set frac to get a 288 MHz ref_io.
> > > + */
> > > + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
> > > + reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
> > > + reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
> > > + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -522,6 +532,12 @@ int __init mx23_clocks_init(void)
> > > {
> > > clk_misc_init();
> > >
> > > + /*
> > > + * source ssp clock from ref_io than ref_xtal,
> > > + * as ref_xtal only provides 24 MHz as maximum.
> > > + */
> > > + clk_set_parent(&ssp_clk, &ref_io_clk);
> > > +
> > > clk_enable(&cpu_clk);
> > > clk_enable(&hbus_clk);
> > > clk_enable(&xbus_clk);
> > > diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
> > > index 9f4ee36..aeb7b2c 100644
> > > --- a/arch/arm/mach-mxs/clock-mx28.c
> > > +++ b/arch/arm/mach-mxs/clock-mx28.c
> > > @@ -619,6 +619,8 @@ static struct clk_lookup lookups[] = {
> > > _REGISTER_CLOCK("pll2", NULL, pll2_clk)
> > > _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
> > > _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
> > > + _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
> > > + _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
> > > _REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
> > > _REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
> > > _REGISTER_CLOCK(NULL, "usb0", usb0_clk)
> > > @@ -730,6 +732,15 @@ static int clk_misc_init(void)
> > > reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
> > > __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
> > >
> > > + /*
> > > + * 480 MHz seems too high to be ssp clock source directly,
> > > + * so set frac0 to get a 288 MHz ref_io0.
> > > + */
> > > + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
> > > + reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
> > > + reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
> > > + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -737,6 +748,13 @@ int __init mx28_clocks_init(void)
> > > {
> > > clk_misc_init();
> > >
> > > + /*
> > > + * source ssp clock from ref_io0 than ref_xtal,
> > > + * as ref_xtal only provides 24 MHz as maximum.
> > > + */
> > > + clk_set_parent(&ssp0_clk, &ref_io0_clk);
> > > + clk_set_parent(&ssp1_clk, &ref_io0_clk);
> > > +
> > > clk_enable(&cpu_clk);
> > > clk_enable(&hbus_clk);
> > > clk_enable(&xbus_clk);
> > > diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
> > > index 1256788..4419390 100644
> > > --- a/arch/arm/mach-mxs/devices-mx23.h
> > > +++ b/arch/arm/mach-mxs/devices-mx23.h
> > > @@ -14,3 +14,7 @@
> > > extern const struct amba_device mx23_duart_device __initconst;
> > > #define mx23_add_duart() \
> > > mxs_add_duart(&mx23_duart_device)
> > > +
> > > +extern const struct mxs_mmc_data mx23_mmc_data[] __initconst;
> > > +#define mx23_add_mmc(id, pdata) \
> > > + mxs_add_mmc(&mx23_mmc_data[id], pdata)
> > mxs_mmc please (not sure about mxs_mxs_mmc_data, but it would be
> > consistent). At least mx23_add_mxs_mmc and mxs_add_mxs_mmc.
> >
> > > diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
> > > index 3b18304..540639d 100644
> > > --- a/arch/arm/mach-mxs/devices-mx28.h
> > > +++ b/arch/arm/mach-mxs/devices-mx28.h
> > > @@ -32,3 +32,7 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
> > > mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
> > > #define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
> > > #define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
> > > +
> > > +extern const struct mxs_mmc_data mx28_mmc_data[] __initconst;
> > > +#define mx28_add_mmc(id, pdata) \
> > > + mxs_add_mmc(&mx28_mmc_data[id], pdata)
> > This conflicts with my series, but it's trivial enough to let Sascha
> > handle that.
> >
> > > diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
> > > index 6c65b67..49307f8 100644
> > > --- a/arch/arm/mach-mxs/devices/Kconfig
> > > +++ b/arch/arm/mach-mxs/devices/Kconfig
> > > @@ -11,3 +11,6 @@ config MXS_HAVE_PLATFORM_FEC
> > > config MXS_HAVE_PLATFORM_FLEXCAN
> > > select HAVE_CAN_FLEXCAN if CAN
> > > bool
> > > +
> > > +config MXS_HAVE_PLATFORM_MMC
> > > + bool
> > ditto MXS_HAVE_PLATFORM_MXS_MMC
> >
> > > diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
> > > index ca7acc4..c0dacfd 100644
> > > --- a/arch/arm/mach-mxs/devices/Makefile
> > > +++ b/arch/arm/mach-mxs/devices/Makefile
> > > @@ -3,3 +3,4 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
> > > obj-y += platform-dma.o
> > > obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
> > > obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
> > > +obj-$(CONFIG_MXS_HAVE_PLATFORM_MMC) += platform-mmc.o
> > > diff --git a/arch/arm/mach-mxs/devices/platform-mmc.c b/arch/arm/mach-mxs/devices/platform-mmc.c
> > > new file mode 100644
> > > index 0000000..868def1
> > > --- /dev/null
> > > +++ b/arch/arm/mach-mxs/devices/platform-mmc.c
> > > @@ -0,0 +1,77 @@
> > > +/*
> > > + * Copyright (C) 2010 Pengutronix
> > > + * Uwe Kleine-Koenig <u.kleine-koenig at pengutronix.de>
> > > + *
> > > + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify it under
> > > + * the terms of the GNU General Public License version 2 as published by the
> > > + * Free Software Foundation.
> > > + */
> > > +
> > > +#include <linux/compiler.h>
> > > +#include <linux/err.h>
> > > +#include <linux/init.h>
> > > +
> > > +#include <mach/mx23.h>
> > > +#include <mach/mx28.h>
> > > +#include <mach/devices-common.h>
> > > +
> > > +#define mxs_mmc_data_entry_single(soc, _id, hwid) \
> > > + { \
> > > + .id = _id, \
> > > + .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \
> > > + .dma = soc ## _DMA_SSP ## hwid, \
> > > + .irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \
> > > + .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \
> > > + }
> > > +
> > > +#define mxs_mmc_data_entry(soc, _id, hwid) \
> > > + [_id] = mxs_mmc_data_entry_single(soc, _id, hwid)
> > > +
> > > +
> > > +#ifdef CONFIG_SOC_IMX23
> > > +const struct mxs_mmc_data mx23_mmc_data[] __initconst = {
> > > +#define mx23_mmc_data_entry(_id, hwid) \
> > > + mxs_mmc_data_entry(MX23, _id, hwid)
> > > + mx23_mmc_data_entry(0, 1),
> > > + mx23_mmc_data_entry(1, 2),
> > > +};
> > hmm, maybe let mxs-mmc.1 use MX23_SSP1_BASE_ADDR?
> > BTW, Sascha pointed out that
> >
> > mxs_mmc_data_entry(MX23, 0, 1),
> > mxs_mmc_data_entry(MX23, 1, 2),
> >
> > is easier than
> >
> > #define mx23_mmc_data_entry(_id, hwid) \
> > mxs_mmc_data_entry(MX23, _id, hwid)
> > mx23_mmc_data_entry(0, 1),
> > mx23_mmc_data_entry(1, 2),
> >
> This approach was used in mx23 auart device code which Sascha has
> merged.
Yeah, I don't care that much. Do as you prefer. Sascha told me to
rework the existing code in a free minute to the two-line variant.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the linux-arm-kernel
mailing list