[PATCH 04/09] ARM: s3c2440: gta02: Select missing S3C_DEV_USB_HOST

[Kukjin Kim]

Lars-Peter Clausen wrote:
> 
> The gta02 mach file references the ohci device.
> So we need to select S3C_DEV_USB_HOST to have the device available.
> 
> This fixes the following linker errors:
> 	arch/arm/mach-s3c2440/built-in.o: In function `gta02_machine_init':
> 	mach-gta02.c:(.init.text+0x370): undefined reference to
> `s3c_ohci_set_platdata'
> 	arch/arm/mach-s3c2440/built-in.o:(.init.data+0xac): undefined
> reference to `s3c_device_ohci'
> 
> Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
> ---
>  arch/arm/mach-s3c2440/Kconfig |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
> index a0cb258..50825a3 100644
> --- a/arch/arm/mach-s3c2440/Kconfig
> +++ b/arch/arm/mach-s3c2440/Kconfig
> @@ -99,6 +99,7 @@ config MACH_NEO1973_GTA02
>  	select POWER_SUPPLY
>  	select MACH_NEO1973
>  	select S3C2410_PWM
> +	select S3C_DEV_USB_HOST
>  	help
>  	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM
> Phone
> 
> --
> 1.7.2.3

Ok, applied.
Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.