[PATCH 3/6] omap4: powerdomain: Use intended PWRSTS_* flags instead of values

[Kevin Hilman]

Santosh Shilimkar <santosh.shilimkar at ti.com> writes:

> IVAHD and ABE power domain logic state is populated using directly
> value instead of the capability flags.
>
> Fix the same.

Again, has this been fixed in the scripts?

For future reference,  It will be helpful to note in the changelog that
this kind of thing has been fixed in the autogen scripts.

Thanks,

Kevin

> Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
> ---
>  arch/arm/mach-omap2/powerdomains44xx_data.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
> index 96cde98..daee255 100644
> --- a/arch/arm/mach-omap2/powerdomains44xx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
> @@ -80,7 +80,7 @@ static struct powerdomain abe_44xx_pwrdm = {
>  	.prcm_partition	  = OMAP4430_PRM_PARTITION,
>  	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
>  	.pwrsts		  = PWRSTS_OFF_RET_INA_ON,
> -	.pwrsts_logic_ret = PWRDM_POWER_OFF,
> +	.pwrsts_logic_ret = PWRSTS_OFF,
>  	.banks		  = 2,
>  	.pwrsts_mem_ret	= {
>  		[0] = PWRDM_POWER_RET,	/* aessmem */
> @@ -227,7 +227,7 @@ static struct powerdomain ivahd_44xx_pwrdm = {
>  	.prcm_partition	  = OMAP4430_PRM_PARTITION,
>  	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
>  	.pwrsts		  = PWRSTS_OFF_RET_INA_ON,
> -	.pwrsts_logic_ret = PWRDM_POWER_OFF,
> +	.pwrsts_logic_ret = PWRSTS_OFF,
>  	.banks		  = 4,
>  	.pwrsts_mem_ret	= {
>  		[0] = PWRDM_POWER_OFF,	/* hwa_mem */