[PATCH 1/4] spi/pl022: use dmaengine helper macros

Linus Walleij linus.walleij at stericsson.com
Tue Feb 8 07:01:26 EST 2011


This simplifies the DMA code a bit by using the dmaengine helpers.
The cookie from descriptor submission can be ignored in this case
as has been established in review of the MMCI/PL180 driver.

Cc: Dan Williams <dan.j.williams at intel.com>
Cc: Russell King <rmk+kernel at arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 drivers/spi/amba-pl022.c |   27 ++++++++++-----------------
 1 files changed, 10 insertions(+), 17 deletions(-)

diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 71a1219..4220aad 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -917,7 +917,6 @@ static int configure_dma(struct pl022 *pl022)
 	struct dma_chan *txchan = pl022->dma_tx_channel;
 	struct dma_async_tx_descriptor *rxdesc;
 	struct dma_async_tx_descriptor *txdesc;
-	dma_cookie_t cookie;
 
 	/* Check that the channels are available */
 	if (!rxchan || !txchan)
@@ -962,10 +961,8 @@ static int configure_dma(struct pl022 *pl022)
 		tx_conf.dst_addr_width = rx_conf.src_addr_width;
 	BUG_ON(rx_conf.src_addr_width != tx_conf.dst_addr_width);
 
-	rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
-				       (unsigned long) &rx_conf);
-	txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
-				       (unsigned long) &tx_conf);
+	dmaengine_slave_config(rxchan, &rx_conf);
+	dmaengine_slave_config(txchan, &tx_conf);
 
 	/* Create sglists for the transfers */
 	pages = (pl022->cur_transfer->len >> PAGE_SHIFT) + 1;
@@ -1018,23 +1015,19 @@ static int configure_dma(struct pl022 *pl022)
 	rxdesc->callback_param = pl022;
 
 	/* Submit and fire RX and TX with TX last so we're ready to read! */
-	cookie = rxdesc->tx_submit(rxdesc);
-	if (dma_submit_error(cookie))
-		goto err_submit_rx;
-	cookie = txdesc->tx_submit(txdesc);
-	if (dma_submit_error(cookie))
-		goto err_submit_tx;
-	rxchan->device->device_issue_pending(rxchan);
-	txchan->device->device_issue_pending(txchan);
+	dmaengine_submit(rxdesc);
+	dmaengine_submit(txdesc);
+	dma_async_issue_pending(rxchan);
+	dma_async_issue_pending(txchan);
 
 	return 0;
 
 err_submit_tx:
 err_submit_rx:
 err_txdesc:
-	txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0);
+	dmaengine_terminate_all(txchan);
 err_rxdesc:
-	rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0);
+	dmaengine_terminate_all(rxchan);
 	dma_unmap_sg(txchan->device->dev, pl022->sgt_tx.sgl,
 		     pl022->sgt_tx.nents, DMA_TO_DEVICE);
 err_tx_sgmap:
@@ -1101,8 +1094,8 @@ static void terminate_dma(struct pl022 *pl022)
 	struct dma_chan *rxchan = pl022->dma_rx_channel;
 	struct dma_chan *txchan = pl022->dma_tx_channel;
 
-	rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0);
-	txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0);
+	dmaengine_terminate_all(rxchan);
+	dmaengine_terminate_all(txchan);
 	unmap_free_dma_scatter(pl022);
 }
 
-- 
1.7.3.2




More information about the linux-arm-kernel mailing list