[PATCH] mx3fb: Fix parameter to sdc_init_panel

[Guennadi Liakhovetski]

On Mon, 14 Feb 2011, Alexander Stein wrote:

> On Thursday 10 February 2011, 14:01:17 Alexander Stein wrote:
> > On Thursday 10 February 2011, 13:48:23 Guennadi Liakhovetski wrote:
> > > > I don't know which display you used, but I guess your right_margin (and
> > > > lower_margin) needs to be adjusted.
> > > 
> > > Ok, agree. But then you need to adjust all current users and have them
> > > tested... Otherwise, of course, you can just adjust your platform panel
> > > data to work with the current calculations, even though in principle your
> > > patch seems to be doing the right thing (tm), according to the manual.
> > > But if applied as is without fixing all the users, it can very well
> > > break them...
> > 
> > Ok, I've just seen there are some model defines in mx3fb.c which would also
> > be affected.
> > I'll try to find all mx3fb users and fix their videomodes and repost a new
> > patch.
> 
> Uh, this seems next to impossible for me to handle it my own. I checked some 
> users of the mx3fb but I cant say which ones will be affected and which ones 
> not (e.g. without any hsync/vsync, on data enable).
> I've not idea how to fix it then.

Well, you can, of course, adjust parameters for your platform to be able 
to run with this incorrect parameter definition...

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/