[PATCH] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board
Marek Szyprowski
m.szyprowski at samsung.com
Tue Feb 15 05:59:15 EST 2011
This patch adds basic definitions for MAX8952 & LP3974 (MAX8998
compatible) PMICs for UniversalC210 board. Power consumers for the
device drivers will be added later. These two PMICs occupy I2C5 bus.
Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
arch/arm/mach-s5pv310/Kconfig | 2 +
arch/arm/mach-s5pv310/mach-universal_c210.c | 443 +++++++++++++++++++++++++++
2 files changed, 445 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig
index b2a9acc..a8b0425 100644
--- a/arch/arm/mach-s5pv310/Kconfig
+++ b/arch/arm/mach-s5pv310/Kconfig
@@ -102,7 +102,9 @@ config MACH_UNIVERSAL_C210
select S3C_DEV_HSMMC3
select S5PV310_SETUP_SDHCI
select S3C_DEV_I2C1
+ select S3C_DEV_I2C5
select S5PV310_SETUP_I2C1
+ select S5PV310_SETUP_I2C5
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board. S5PC210(MCP) is one of package option of S5PV310
diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c
index 36bc3cf..cad55d3 100644
--- a/arch/arm/mach-s5pv310/mach-universal_c210.c
+++ b/arch/arm/mach-s5pv310/mach-universal_c210.c
@@ -27,6 +27,13 @@
#include <plat/sdhci.h>
#include <mach/map.h>
+#include <mach/gpio.h>
+
+#include <linux/i2c.h>
+#include <plat/iic.h>
+
+#include <linux/regulator/max8952.h>
+#include <linux/mfd/max8998.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -69,6 +76,438 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
},
};
+static struct regulator_consumer_supply max8952_consumer =
+ REGULATOR_SUPPLY("vddarm", NULL);
+
+static struct max8952_platform_data universal_max8952_pdata __initdata = {
+ .gpio_vid0 = S5PV310_GPX0(3),
+ .gpio_vid1 = S5PV310_GPX0(4),
+ .gpio_en = -1, /* Not controllable, set "Always High" */
+ .default_mode = 0, /* vid0 = 0, vid1 = 0 */
+ .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
+ .sync_freq = 0, /* default: fastest */
+ .ramp_speed = 0, /* default: fastest */
+
+ .reg_data = {
+ .constraints = {
+ .name = "VARM_1.2V",
+ .min_uV = 770000,
+ .max_uV = 1400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8952_consumer,
+ },
+};
+
+static struct regulator_consumer_supply lp3974_buck1_consumer =
+ REGULATOR_SUPPLY("vddint", NULL);
+
+static struct regulator_consumer_supply lp3974_buck2_consumer =
+ REGULATOR_SUPPLY("vddg3d", NULL);
+
+static struct regulator_init_data lp3974_buck1_data = {
+ .constraints = {
+ .name = "VINT_1.1V",
+ .min_uV = 750000,
+ .max_uV = 1500000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_buck1_consumer,
+};
+
+static struct regulator_init_data lp3974_buck2_data = {
+ .constraints = {
+ .name = "VG3D_1.1V",
+ .min_uV = 750000,
+ .max_uV = 1500000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_buck2_consumer,
+};
+
+static struct regulator_init_data lp3974_buck3_data = {
+ .constraints = {
+ .name = "VCC_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ .disabled = 0,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_buck4_data = {
+ .constraints = {
+ .name = "VMEM_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo2_data = {
+ .constraints = {
+ .name = "VALIVE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ .disabled = 0,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo3_data = {
+ .constraints = {
+ .name = "VUSB+MIPI_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo4_data = {
+ .constraints = {
+ .name = "VADC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo5_data = {
+ .constraints = {
+ .name = "VTF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo6_data = {
+ .constraints = {
+ .name = "LDO6",
+ .min_uV = 2000000,
+ .max_uV = 2000000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 0,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo7_data = {
+ .constraints = {
+ .name = "VLCD+VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo8_data = {
+ .constraints = {
+ .name = "VUSB+VDAC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo9_data = {
+ .constraints = {
+ .name = "VCC_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ .disabled = 0,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo10_data = {
+ .constraints = {
+ .name = "VPLL_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .boot_on = 1,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo11_data = {
+ .constraints = {
+ .name = "CAM_AF_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo12_data = {
+ .constraints = {
+ .name = "PS_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo13_data = {
+ .constraints = {
+ .name = "VHIC_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo14_data = {
+ .constraints = {
+ .name = "CAM_I_HOST_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo15_data = {
+ .constraints = {
+ .name = "CAM_S_DIG+FM33_CORE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo16_data = {
+ .constraints = {
+ .name = "CAM_S_ANA_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo17_data = {
+ .constraints = {
+ .name = "VCC_3.0V_LCD",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_32khz_ap_data = {
+ .constraints = {
+ .name = "32KHz AP",
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ .disabled = 0,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_32khz_cp_data = {
+ .constraints = {
+ .name = "32KHz CP",
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_vichg_data = {
+ .constraints = {
+ .name = "VICHG",
+ .state_mem = {
+ .enabled = 0,
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_esafeout1_data = {
+ .constraints = {
+ .name = "SAFEOUT1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 1,
+ .disabled = 0,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_esafeout2_data = {
+ .constraints = {
+ .name = "SAFEOUT2",
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 1,
+ .disabled = 0,
+ },
+ },
+};
+
+static struct max8998_regulator_data lp3974_regulators[] = {
+ { MAX8998_LDO2, &lp3974_ldo2_data },
+ { MAX8998_LDO3, &lp3974_ldo3_data },
+ { MAX8998_LDO4, &lp3974_ldo4_data },
+ { MAX8998_LDO5, &lp3974_ldo5_data },
+ { MAX8998_LDO6, &lp3974_ldo6_data },
+ { MAX8998_LDO7, &lp3974_ldo7_data },
+ { MAX8998_LDO8, &lp3974_ldo8_data },
+ { MAX8998_LDO9, &lp3974_ldo9_data },
+ { MAX8998_LDO10, &lp3974_ldo10_data },
+ { MAX8998_LDO11, &lp3974_ldo11_data },
+ { MAX8998_LDO12, &lp3974_ldo12_data },
+ { MAX8998_LDO13, &lp3974_ldo13_data },
+ { MAX8998_LDO14, &lp3974_ldo14_data },
+ { MAX8998_LDO15, &lp3974_ldo15_data },
+ { MAX8998_LDO16, &lp3974_ldo16_data },
+ { MAX8998_LDO17, &lp3974_ldo17_data },
+ { MAX8998_BUCK1, &lp3974_buck1_data },
+ { MAX8998_BUCK2, &lp3974_buck2_data },
+ { MAX8998_BUCK3, &lp3974_buck3_data },
+ { MAX8998_BUCK4, &lp3974_buck4_data },
+ { MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
+ { MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
+ { MAX8998_ENVICHG, &lp3974_vichg_data },
+ { MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
+ { MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
+};
+
+static struct max8998_platform_data universal_lp3974_pdata = {
+ .num_regulators = ARRAY_SIZE(lp3974_regulators),
+ .regulators = lp3974_regulators,
+ .buck1_voltage1 = 1100000, /* INT */
+ .buck1_voltage2 = 1000000,
+ .buck1_voltage3 = 1100000,
+ .buck1_voltage4 = 1000000,
+ .buck1_set1 = S5PV310_GPX0(5),
+ .buck1_set2 = S5PV310_GPX0(6),
+ .buck2_voltage1 = 1200000, /* G3D */
+ .buck2_voltage2 = 1100000,
+ .buck1_default_idx = 0,
+ .buck2_set3 = S5PV310_GPE2(0),
+ .buck2_default_idx = 0,
+ .wakeup = true,
+};
+
+/* GPIO I2C 5 (PMIC) */
+static struct i2c_board_info i2c_devs5[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8952", 0xC0 >> 1),
+ .platform_data = &universal_max8952_pdata,
+ }, {
+ I2C_BOARD_INFO("lp3974", 0xCC >> 1),
+ .platform_data = &universal_lp3974_pdata,
+ },
+};
+
+/* GPIO KEYS */
static struct gpio_keys_button universal_gpio_keys_tables[] = {
{
.code = KEY_VOLUMEUP,
@@ -206,6 +645,7 @@ static struct platform_device *universal_devices[] __initdata = {
/* Universal Devices */
&universal_gpio_keys,
+ &s3c_device_i2c5,
&s5p_device_onenand,
};
@@ -223,6 +663,9 @@ static void __init universal_machine_init(void)
i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+ s3c_i2c5_set_platdata(NULL);
+ i2c_register_board_info(5, i2c_devs5, ARRAY_SIZE(i2c_devs5));
+
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}
--
1.7.1.569.g6f426
More information about the linux-arm-kernel
mailing list