[PATCH V4 0/3] adding write_protect and card_detect for mx25/35

[Wolfram Sang]

Last tests showed some problems with MX51, especially with card_detect. While
the approach in general will suffice for i.MX5x, it seems there are a few
details missing right now. Because I do not have the resources (both time and
hardware) to deal with these issues, I propose a step by step approach. Let's
add the functionality for mx25/35 first and make sure there is no difference in
behaviour for mx5x. (Note that the i.MX5x can route the pins directly to the
controller, so a properly designed board should not need these gpio-additions.)
That is what this patch series does: The main change is that mx5x won't notice
any difference. For mx25/35, it is the same as it has been tested by Eric and
Marc.

Thanks to all involved in providing feedback, I hope it can go in now. If you
want to add support for it to your board, please CC me.

Have a nice weekend,

   Wolfram

Wolfram Sang (3):
  mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO on
    mx25/35
  mmc: sdhci-esdhc: broken card detection is not a default quirk
  mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35

 arch/arm/plat-mxc/include/mach/esdhc.h |   12 +++-
 drivers/mmc/host/sdhci-esdhc-imx.c     |  134 +++++++++++++++++++++++++++++---
 drivers/mmc/host/sdhci-esdhc.h         |    1 -
 drivers/mmc/host/sdhci-of-esdhc.c      |    3 +-
 4 files changed, 135 insertions(+), 15 deletions(-)

-- 
1.7.2.3