[PATCH 2/4] ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Mon Feb 7 10:35:20 EST 2011
This used to be done in .map_io which is supposed to only setup the
memory mapping.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/mach-mx3/mach-armadillo5x0.c | 11 ++++++-----
arch/arm/mach-mx3/mach-cpuimx35.c | 11 ++++++-----
arch/arm/mach-mx3/mach-kzm_arm11_01.c | 11 ++++++-----
arch/arm/mach-mx3/mach-mx31_3ds.c | 11 ++++++-----
arch/arm/mach-mx3/mach-mx31ads.c | 11 ++++++-----
arch/arm/mach-mx3/mach-mx31lilly.c | 12 ++++++------
arch/arm/mach-mx3/mach-mx31lite.c | 11 ++++++-----
arch/arm/mach-mx3/mach-mx31moboard.c | 12 ++++++------
arch/arm/mach-mx3/mach-mx35_3ds.c | 11 ++++++-----
arch/arm/mach-mx3/mach-pcm037.c | 11 ++++++-----
arch/arm/mach-mx3/mach-pcm043.c | 12 ++++++------
arch/arm/mach-mx3/mach-qong.c | 11 ++++++-----
arch/arm/mach-mx3/mach-vpr200.c | 9 +++++----
arch/arm/mach-mx3/mm.c | 14 ++++++++++----
arch/arm/plat-mxc/include/mach/common.h | 3 +++
15 files changed, 90 insertions(+), 71 deletions(-)
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 28b6f41..835e2a0 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -569,9 +569,10 @@ static struct sys_timer armadillo5x0_timer = {
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .timer = &armadillo5x0_timer,
- .init_machine = armadillo5x0_init,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .timer = &armadillo5x0_timer,
+ .init_machine = armadillo5x0_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 26ae90f..3eedf0f 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -184,9 +184,10 @@ struct sys_timer eukrea_cpuimx35_timer = {
MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
/* Maintainer: Eukrea Electromatique */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx35_map_io,
- .init_irq = mx35_init_irq,
- .init_machine = mxc_board_init,
- .timer = &eukrea_cpuimx35_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_ext3_fs = imx35_init_early,
+ .init_irq = mx35_init_irq,
+ .timer = &eukrea_cpuimx35_timer,
+ .init_machine = mxc_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index a5f3eb2..52b8dd7 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -274,9 +274,10 @@ static struct sys_timer kzm_timer = {
* initialize __mach_desc_KZM_ARM11_01 data structure.
*/
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = kzm_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = kzm_board_init,
- .timer = &kzm_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = kzm_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .timer = &kzm_timer,
+ .init_machine = kzm_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 2f41430..2646467 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -373,9 +373,10 @@ static struct sys_timer mx31_3ds_timer = {
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx31_3ds_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .timer = &mx31_3ds_timer,
+ .init_machine = mxc_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index e40eb6e..787bdc4 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -550,9 +550,10 @@ static struct sys_timer mx31ads_timer = {
*/
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31ads_map_io,
- .init_irq = mx31ads_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx31ads_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31ads_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31ads_init_irq,
+ .timer = &mx31ads_timer,
+ .init_machine = mxc_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 2c59548..25e143a 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -347,10 +347,10 @@ static struct sys_timer mx31lilly_timer = {
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mx31lilly_board_init,
- .timer = &mx31lilly_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .timer = &mx31lilly_timer,
+ .init_machine = mx31lilly_board_init,
MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 9e64c66..c03c77d 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -281,9 +281,10 @@ struct sys_timer mx31lite_timer = {
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31lite_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx31lite_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31lite_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .timer = &mx31lite_timer,
+ .init_machine = mxc_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 1aa8d65..ea72480 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -564,10 +564,10 @@ struct sys_timer mx31moboard_timer = {
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx31moboard_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .timer = &mx31moboard_timer,
+ .init_machine = mxc_board_init,
MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index b1963f2..c5115dc 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -193,9 +193,10 @@ struct sys_timer mx35pdk_timer = {
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx35_map_io,
- .init_irq = mx35_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx35pdk_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_early = imx35_init_early,
+ .init_irq = mx35_init_irq,
+ .timer = &mx35pdk_timer,
+ .init_machine = mxc_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index b752f6b..7d444f7 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -675,9 +675,10 @@ struct sys_timer pcm037_timer = {
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &pcm037_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .timer = &pcm037_timer,
+ .init_machine = mxc_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index a515290..b03e19d 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -403,10 +403,10 @@ struct sys_timer pcm043_timer = {
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx35_map_io,
- .init_irq = mx35_init_irq,
- .init_machine = mxc_board_init,
- .timer = &pcm043_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_early = imx35_init_early,
+ .init_irq = mx35_init_irq,
+ .timer = &pcm043_timer,
+ .init_machine = mxc_board_init,
MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index fd1050c..064f2db 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -270,9 +270,10 @@ static struct sys_timer qong_timer = {
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &qong_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .timer = &qong_timer,
+ .init_machine = mxc_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
index 22ec78a..2cf390f 100644
--- a/arch/arm/mach-mx3/mach-vpr200.c
+++ b/arch/arm/mach-mx3/mach-vpr200.c
@@ -320,8 +320,9 @@ struct sys_timer vpr200_timer = {
MACHINE_START(VPR200, "VPR200")
/* Maintainer: Creative Product Design */
- .map_io = mx35_map_io,
- .init_irq = mx35_init_irq,
- .init_machine = vpr200_board_init,
- .timer = &vpr200_timer,
+ .map_io = mx35_map_io,
+ .init_early = imx35_init_early,
+ .init_irq = mx35_init_irq,
+ .timer = &vpr200_timer,
+ .init_machine = vpr200_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 47118f7..3387319 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -52,10 +52,13 @@ static struct map_desc mx31_io_desc[] __initdata = {
*/
void __init mx31_map_io(void)
{
+ iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-
- iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
}
int imx31_register_gpios(void);
@@ -77,11 +80,14 @@ static struct map_desc mx35_io_desc[] __initdata = {
void __init mx35_map_io(void)
{
+ iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-
- iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
int imx35_register_gpios(void);
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index e4f1de0..857eebf47 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -28,6 +28,9 @@ extern void imx1_init_early(void);
extern void imx21_init_early(void);
extern void imx25_init_early(void);
extern void imx27_init_early(void);
+extern void imx31_init_early(void);
+extern void imx35_init_early(void);
+extern void imx50_init_early(void);
extern void mxc_init_irq(void __iomem *);
extern void tzic_init_irq(void __iomem *);
extern void mx1_init_irq(void);
--
1.7.2.3
More information about the linux-arm-kernel
mailing list