[PATCH v2 5/5] mmc: sdhci-esdhc: enable esdhc on imx53

[Wolfram Sang]

On Tue, Feb 22, 2011 at 06:13:26PM +0800, Richard Zhu wrote:
> Fix the NO INT in the Multi-BLK IO in SD/MMC, and
> Multi-BLK read in SDIO
> 
> Signed-off-by: Richard Zhu <Hong-Xing.Zhu at freescale.com>

Thanks for respinning \o/ This approach looks better to me, but CCing
Olof to comment on abstraction issues if he has them. Will do a deeper
review later this week.

Regards,

   Wolfram

> ---
>  drivers/mmc/host/sdhci-esdhc-imx.c |   41 +++++++++++++++++++++++++++++++++++-
>  drivers/mmc/host/sdhci-esdhc.h     |    5 ++++
>  2 files changed, 45 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> index 9b82910..a09f786 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -17,6 +17,8 @@
>  #include <linux/clk.h>
>  #include <linux/mmc/host.h>
>  #include <linux/mmc/sdhci-pltfm.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/sdio.h>
>  #include <mach/hardware.h>
>  #include "sdhci.h"
>  #include "sdhci-pltfm.h"
> @@ -38,6 +40,27 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
>  	return readw(host->ioaddr + reg);
>  }
>  
> +static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
> +{
> +	switch (reg) {
> +	case SDHCI_INT_STATUS:
> +		/*
> +		 * Fix no INT bug in SDIO MULTI-BLK read
> +		 * clear bit1 of Vendor Spec registor after TC
> +		 */
> +		if (val & SDHCI_INT_DATA_END) {
> +			u32 v;
> +			v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
> +			if (v & 0x2) {
> +				v &= (~0x2);
> +				writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
> +			}
> +		}
> +		break;
> +	}
> +	writel(val, host->ioaddr + reg);
> +}
> +
>  static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
>  {
>  	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> @@ -45,12 +68,27 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
>  	switch (reg) {
>  	case SDHCI_TRANSFER_MODE:
>  		/*
> +		 * Fix no INT bug in SDIO MULTI-BLK read
> +		 * set bit1 of Vendor Spec registor
> +		 */
> +		if ((host->cmd->opcode == SD_IO_RW_EXTENDED)
> +				&& (host->cmd->data->blocks > 1)
> +				&& (host->cmd->data->flags & MMC_DATA_READ)) {
> +			u32 v;
> +			v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
> +			v |= 0x2;
> +			writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
> +		}
> +		/*
>  		 * Postpone this write, we must do it together with a
>  		 * command write that is down below.
>  		 */
>  		pltfm_host->scratchpad = val;
>  		return;
>  	case SDHCI_COMMAND:
> +		/*Set the CMD_TYPE of the CMD12, fix no INT in MULTI_BLK IO */
> +		if (host->cmd->opcode == MMC_STOP_TRANSMISSION)
> +			val |= SDHCI_CMD_ABORTCMD;
>  		writel(val << 16 | pltfm_host->scratchpad,
>  			host->ioaddr + SDHCI_TRANSFER_MODE);
>  		return;
> @@ -113,7 +151,7 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
>  	clk_enable(clk);
>  	pltfm_host->clk = clk;
>  
> -	if (cpu_is_mx35() || cpu_is_mx51())
> +	if (!cpu_is_mx25())
>  		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
>  
>  	/* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
> @@ -133,6 +171,7 @@ static void esdhc_pltfm_exit(struct sdhci_host *host)
>  
>  static struct sdhci_ops sdhci_esdhc_ops = {
>  	.read_w = esdhc_readw_le,
> +	.write_l = esdhc_writel_le,
>  	.write_w = esdhc_writew_le,
>  	.write_b = esdhc_writeb_le,
>  	.set_clock = esdhc_set_clock,
> diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
> index 303cde0..c93168c 100644
> --- a/drivers/mmc/host/sdhci-esdhc.h
> +++ b/drivers/mmc/host/sdhci-esdhc.h
> @@ -43,6 +43,11 @@
>  
>  #define ESDHC_HOST_CONTROL_RES	0x05
>  
> +/* Abort type definition in the command register  */
> +#define  SDHCI_CMD_ABORTCMD	0xC0
> +/* VENDOR SPEC register */
> +#define SDHCI_VENDOR_SPEC	0xC0
> +
>  static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
>  {
>  	int pre_div = 2;
> -- 
> 1.7.1
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110222/08a756f9/attachment.sig>