August 2011 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Aug 1 00:06:27 EDT 2011
Ending: Wed Aug 31 23:58:13 EDT 2011
Messages: 3832

• Fwd: [PATCH 0/2] video: add Samsung SoC based MIPI-DSI support.   InKi Dae
• [PATCH 00/18] dmaengine/amba-pl08x updates   viresh kumar
• [AT91] Add support for RSI EWS board (machine type 1609)   Josef Holzmayr
  • [PATCH] Add support for RSIs EWS board (machine type 1609)   Josef Holzmayr
• [PATCH] i.MX25 GPT clock fix: ensure correct the clock source   Mehnert, Torsten
  • [PATCH] i.MX25 GPT clock fix: ensure correct the clock source   Sascha Hauer
• [RFC PATCH v9 0/4] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [PATCH v2 1/7] ARM: mmp: parse irq from DT   Russell King - ARM Linux
• [PATCH v2 4/7] tty: serial: support device tree in pxa   Russell King - ARM Linux
• [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Russell King - ARM Linux
  • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Geert Uytterhoeven
    • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Russell King - ARM Linux
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Geert Uytterhoeven
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Uwe Kleine-König
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Arnaud Lacombe
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Kyle Moffett
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Arnaud Lacombe
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Nicolas Pitre
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Arnaud Lacombe
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Kyle Moffett
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Arnaud Lacombe
      • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Arnaud Lacombe
  • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Zoltan Devai
    • [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Russell King - ARM Linux
• [PATCH] Add sched_clock to AT91 TCB clocksource driver   Remy Bohmer
  • [PATCH] Add sched_clock to AT91 TCB clocksource driver   Russell King - ARM Linux
    • [PATCH] Add sched_clock to AT91 TCB clocksource driver   Remy Bohmer
      • [PATCH] Add sched_clock to AT91 TCB clocksource driver   Russell King - ARM Linux
      • [PATCH] Add sched_clock to AT91 TCB clocksource driver   Remy Bohmer
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Felipe Balbi
• [PATCH V2 00/20] dmaengine/amba-pl08x updates   Viresh Kumar
  • [PATCH V2 01/20] ARM: asm/pl080.h: Protect against multiple inclusion of header file   Viresh Kumar
  • [PATCH V2 02/20] dmaengine/amba-pl08x: Resolve formatting issues   Viresh Kumar
  • [PATCH V2 11/20] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   Viresh Kumar
  • [PATCH V2 12/20] dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()   Viresh Kumar
  • [PATCH V2 13/20] dmaengine/amba-pl08x: max_bytes_per_lli is TRANSFER_SIZE * src_width (not MIN(width))   Viresh Kumar
  • [PATCH V2 14/20] dmaengine/amba-pl08x: Add prep_single_byte_llis() routine   Viresh Kumar
  • [PATCH V2 15/20] dmaengine/amba-pl08x: Align lli_len to max(src.width, dst.width)   Viresh Kumar
  • [PATCH V2 16/20] dmaengine/amba-pl08x: Choose peripheral bus as master bus   Viresh Kumar
  • [PATCH V2 17/20] dmaengine/amba-pl08x: Pass flow controller information with slave channel data   Viresh Kumar
  • [PATCH V2 18/20] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
    • [PATCH V2 18/20] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   viresh kumar
  • [PATCH V2 19/20] dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool   Viresh Kumar
  • [PATCH V2 20/20] dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling kfree() directly   Viresh Kumar
  • [PATCH V3 08/20] dmaengine/amba-pl08x: support runtime PM   Viresh Kumar
    • [PATCH V3 08/20] dmaengine/amba-pl08x: support runtime PM   Koul, Vinod
      • [PATCH V3 08/20] dmaengine/amba-pl08x: support runtime PM   viresh kumar
• [PATCH V2 03/20] dmaengine/amba-pl08x: Rearrange inclusion of header files in ascending order   Viresh Kumar
  • [PATCH V2 03/20] dmaengine/amba-pl08x: Rearrange inclusion of header files in ascending order   Sergei Shtylyov
    • [PATCH V2 03/20] dmaengine/amba-pl08x: Rearrange inclusion of header files in ascending order   viresh kumar
• [PATCH V2 04/20] dmaengine/amba-pl08x: pass (*ptr) to sizeof() instead of (struct xyz)   Viresh Kumar
• [PATCH V2 05/20] dmaengine/amba-pl08x: Complete doc comment for struct pl08x_txd   Viresh Kumar
• [PATCH V2 06/20] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   Viresh Kumar
• [PATCH V2 07/20] dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_info   Viresh Kumar
  • [PATCH V2 07/20] dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_info   Koul, Vinod
    • [PATCH V2 07/20] dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_info   viresh kumar
      • [PATCH V2 07/20] dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_info   Koul, Vinod
• [PATCH V2 08/20] dmaengine/amba-pl08x: support runtime PM   Viresh Kumar
  • [PATCH V2 08/20] dmaengine/amba-pl08x: support runtime PM   Russell King - ARM Linux
    • [PATCH V2 08/20] dmaengine/amba-pl08x: support runtime PM   viresh kumar
  • [PATCH V2 08/20] dmaengine/amba-pl08x: support runtime PM   Russell King - ARM Linux
    • [PATCH V2 08/20] dmaengine/amba-pl08x: support runtime PM   viresh kumar
      • [PATCH V2 08/20] dmaengine/amba-pl08x: support runtime PM   Koul, Vinod
      • [PATCH V2 08/20] dmaengine/amba-pl08x: support runtime PM   viresh kumar
      • [PATCH V2 08/20] dmaengine/amba-pl08x: support runtime PM   Koul, Vinod
      • [PATCH V2 08/20] dmaengine/amba-pl08x: support runtime PM   viresh kumar
• [PATCH V2 09/20] dmaengine/amba-pl08x: Simplify pl08x_ensure_on()   Viresh Kumar
• [PATCH V2 10/20] dmaengine/amba-pl08x: No need to check "ch->signal < 0"   Viresh Kumar
• [PATCH 0/8] ARM: getting rid of mx5/devices.c and mxc_register_device   Uwe Kleine-König
  • [PATCH 1/8] ARM: mx5: fix remaining unconsistent names for irqs   Uwe Kleine-König
    • [PATCH 2/8] ARM: mx5: remove unused #includes of devices.h   Uwe Kleine-König
    • [PATCH 3/8] ARM: mx5: dynamically allocate mxc-ehci devices   Uwe Kleine-König
    • [PATCH 4/8] ARM: mx5: dynamically allocate fsl-usb2-udc devices   Uwe Kleine-König
    • [PATCH 5/8] ARM: mx5: dynamically allocate high speed i2c (imx-i2c actually)   Uwe Kleine-König
    • [PATCH 6/8] ARM: imx/mx1ads: dynamically allocate physmap-flash device   Uwe Kleine-König
    • [PATCH 7/8] ARM: imx/armadillo5x0: dynamically allocate physmap-flash device   Uwe Kleine-König
    • [PATCH 8/8] ARM: mxc: drop now unused function mxc_register_device   Uwe Kleine-König
• [PATCH] ARM: SAMSUNG: Fix build of dev- infrastructure for module.h changes   Paul Gortmaker
  • [PATCH] ARM: SAMSUNG: Fix build of dev- infrastructure for module.h changes   Mark Brown
• [GIT PULL] msm gpio move to drivers/gpio   David Brown
  • [GIT PULL] msm gpio move to drivers/gpio   Grant Likely
    • [GIT PULL] msm gpio move to drivers/gpio   David Brown
• [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng
  • [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
    • [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng-B29396
      • [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
      • [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng-B29396
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Takashi Iwai
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng-B29396
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Takashi Iwai
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng-B29396
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Takashi Iwai
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng-B29396
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Takashi Iwai
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Takashi Iwai
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Takashi Iwai
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Takashi Iwai
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng-B29396
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng-B29396
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng-B29396
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
      • [PATCH 1/1] ASoC: core: cache index fix   Dong Aisheng-B29396
      • [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
      • [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
      • [PATCH 1/1] ASoC: core: cache index fix   Wolfram Sang
      • [alsa-devel] [PATCH 1/1] ASoC: core: cache index fix   Takashi Iwai
      • [PATCH 1/1] ASoC: core: cache index fix   Mark Brown
• [PATCH 1/1] ASoC: sgtl5000: add one missed cache reg   Dong Aisheng
  • [PATCH 1/1] ASoC: sgtl5000: add one missed cache reg   Wolfram Sang
    • [alsa-devel] [PATCH 1/1] ASoC: sgtl5000: add one missed cache reg   Liam Girdwood
  • [PATCH 1/1] ASoC: sgtl5000: add one missed cache reg   Mark Brown
• [PATCH 1/2] of: address: use resource_size helper   Grant Likely
• [PATCH 2/2] arm: omap: mark dt_compat __initconst   Grant Likely
• [PATCH 1/9] davinci: make __arch_ioremap() with 0 size return NULL   Jamie Iles
  • [PATCH 2/9] ebsa110: make __arch_ioremap() with 0 size return NULL   Jamie Iles
  • [PATCH 3/9] ixp23xx: make __arch_ioremap() with 0 size return NULL   Jamie Iles
  • [PATCH 4/9] ixp4xx: make __arch_ioremap() with 0 size return NULL   Jamie Iles
  • [PATCH 5/9] kirkwood: make __arch_ioremap() with 0 size return NULL   Jamie Iles
  • [PATCH 6/9] orion: make __arch_ioremap() with 0 size return NULL   Jamie Iles
  • [PATCH 7/9] tegra: make __arch_ioremap() with 0 size return NULL   Jamie Iles
  • [PATCH 8/9] iop: make __arch_ioremap() with 0 size return NULL   Jamie Iles
  • [PATCH 9/9] omap: make __arch_ioremap() with 0 size return NULL   Jamie Iles
• [PATCH v2 1/7] ARM: mmp: parse irq from DT   Grant Likely
  • [PATCH v2 1/7] ARM: mmp: parse irq from DT   Haojian Zhuang
    • [PATCH v2 1/7] ARM: mmp: parse irq from DT   Grant Likely
• [PATCH V2 3/3] dmaengine: at_hdmac: add wrappers for testing channel state   Nicolas Ferre
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
  • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
    • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
      • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
      • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
      • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
      • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
      • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
      • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
• [RFC PATCH 1/9] mmc: atmel-mci: change namespace   Nicolas Ferre
• [RFC PATCH 6/9] atmel_pdc: add ATMEL_PDC_SCND_BUF_OFF   Nicolas Ferre
• [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Kevin Hilman
  • [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Grant Likely
    • [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Felipe Balbi
      • [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Russell King - ARM Linux
      • [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Kevin Hilman
      • [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Felipe Balbi
      • [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Russell King - ARM Linux
      • [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Grant Likely
• Add device tree enabled Exynos4 machine   Thomas Abraham
  • [PATCH 1/2] arm: exynos4: Add a new Exynos4 device tree enabled machine   Thomas Abraham
    • [PATCH 1/2] arm: exynos4: Add a new Exynos4 device tree enabled machine   Grant Likely
  • [PATCH 2/2] arm: dt: Add device tree source file for Exynos4 and let boards include it   Thomas Abraham
• [PATCH] arm: fix compile failure in orion5x/dns323-setup.c   Paul Gortmaker
  • [PATCH] arm: fix compile failure in orion5x/dns323-setup.c   Nicolas Pitre
  • [PATCH] arm: fix compile failure in orion5x/dns323-setup.c   Ralf Baechle
    • [PATCH] arm: fix compile failure in orion5x/dns323-setup.c   Bryan Wu
• [RFC PATCH v10 0/4] Consolidating GIC per-cpu interrupts   Marc Zyngier
  • [RFC PATCH v10 1/4] ARM: gic: consolidate PPI handling   Marc Zyngier
  • [RFC PATCH v10 2/4] ARM: gic: Add PPI registration interface   Marc Zyngier
  • [RFC PATCH v10 3/4] ARM: local timers: drop local_timer_ack()   Marc Zyngier
  • [RFC PATCH v10 4/4] ARM: gic: add compute_irqnr macro for exynos4   Marc Zyngier
• questions about memory hotplug   Larry Bassel
  • questions about memory hotplug   Shaohua Li
    • questions about memory hotplug   Shaohua Li
      • questions about memory hotplug   Larry Bassel
• questions about memory hotplug   Larry Bassel
• [PATCH v3 0/3] Add device tree support for i.mx51/53 boards   Shawn Guo
  • [PATCH v3 1/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
    • [PATCH v3 1/2] arm/mx5: add device tree support for imx53 boards   Grant Likely
      • [PATCH v3 1/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
      • [PATCH v3 1/2] arm/mx5: add device tree support for imx53 boards   Grant Likely
    • [PATCH v3 1/2] arm/mx5: add device tree support for imx53 boards   Sascha Hauer
      • [PATCH v3 1/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
      • [PATCH v3 1/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
      • [PATCH v3 1/2] arm/mx5: add device tree support for imx53 boards   Grant Likely
  • [PATCH v3 2/2] arm/mx5: add device tree support for imx51 babbage   Shawn Guo
• [PATCH] CSR: add missing sentinels to of_device_id tables   Jamie Iles
  • [PATCH] CSR: add missing sentinels to of_device_id tables   Lothar Waßmann
    • [PATCH] CSR: add missing sentinels to of_device_id tables   Jamie Iles
      • [PATCH] CSR: add missing sentinels to of_device_id tables   Barry Song
• [PATCH][Resend] Remove unneeded version.h includes from arch/arm/   Jesper Juhl
• [PATCH v2 2/2] i2c/imx: add device tree probe support   Ben Dooks
• pandaboard brctl oops   Marek Vasut
  • pandaboard brctl oops   Shan Wei
    • pandaboard brctl oops   Miloš GymRK
  • [PATCH v2 2/2] i2c/imx: add device tree probe support   Shawn Guo
• [PATCH] DT: OMAP: Convert I2C driver to use device tree   Grant Likely
• [PATCH v2] OMAP: ctrl: Fix CONTROL_DSIPHY register fields   Paul Walmsley
• [PATCH 0/3] mmp clockevent handling race fix   Lennert Buytenhek
  • [PATCH 0/3] mmp clockevent handling race fix   Haojian Zhuang
    • [PATCH 0/3] mmp clockevent handling race fix   Eric Miao
• [PATCH 1/3] ARM: mmp: Also start timer 1 on boot.   Lennert Buytenhek
• [PATCH 2/3] ARM: mmp: Switch to using timer 1 as clocksource timer.   Lennert Buytenhek
• [PATCH 3/3] ARM: mmp: Change the way we use timer 0 as clockevent timer.   Lennert Buytenhek
• [PATCH v2 1/4] OMAP4: hwmod data: Add GPMC   Paul Walmsley
• [PATCH v3] net/smsc911x: add device tree probe support   David Miller
• [PATCH] ARM: platform_device: pdev_archdata: add omap_device pointer   Kevin Hilman
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
  • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Shawn Guo
  • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Shawn Guo
  • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Shawn Guo
    • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v4 0/2] Add device tree support for i.mx51/53 boards   Shawn Guo
  • [PATCH v4 0/2] Add device tree support for i.mx51/53 boards   Grant Likely
    • [PATCH v4 0/2] Add device tree support for i.mx51/53 boards   Sascha Hauer
• [PATCH 1/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Shawn Guo
• [PATCH] disable the correct parent clock in clk_gate_disable()   Lothar Waßmann
• kernel debugging (KGDB or JTAG)   Jan Pohanka
  • kernel debugging (KGDB or JTAG)   Marc Titinger
    • kernel debugging (KGDB or JTAG)   Jan Pohanka
  • kernel debugging (KGDB or JTAG)   Tomasz Figa
• [PATCH v4 0/7] ARM: mx28: add usb host function   Tony Lin
  • [PATCH v4 0/7] ARM: mx28: add usb host function   Lin Tony-B19295
    • [PATCH v4 0/7] ARM: mx28: add usb host function   s.hauer at pengutronix.de
      • [PATCH v4 0/7] ARM: mx28: add usb host function   Peter Chen
      • [PATCH v4 0/7] ARM: mx28: add usb host function   s.hauer at pengutronix.de
      • [PATCH v4 0/7] ARM: mx28: add usb host function   Lin Tony-B19295
• [PATCH v4 1/7] ARM: mxs: ehci: consolidate definitions and structures to share among platforms   Tony Lin
• [PATCH v4 2/7] ARM: mxs: make ehci-mxc more flexible to be used on different platforms   Tony Lin
• [PATCH v4 3/7] ARM: mxs: add usb clocks to clock tree   Tony Lin
• [PATCH v4 4/7] ARM: mxs: enable usb phy power supply   Tony Lin
• [PATCH v4 5/7] ARM: mxs: add usb platform operations   Tony Lin
• [PATCH v4 6/7] ARM: mxs: add usb platform operations   Tony Lin
• [PATCH v4 7/7] ARM: mxs: add usb host function to default config   Tony Lin
• [PATCH 07/18] dmaengine/amba-pl08x: Enable/Disable amba_pclk with channel requests   Linus Walleij
  • [PATCH 07/18] dmaengine/amba-pl08x: Enable/Disable amba_pclk with channel requests   Russell King - ARM Linux
    • [PATCH 07/18] dmaengine/amba-pl08x: Enable/Disable amba_pclk with channel requests   Linus Walleij
• [PATCH] spi/pl022: remove function cannot exit   Linus Walleij
  • [PATCH] spi/pl022: remove function cannot exit   Grant Likely
• [PATCHv4 01/11] atomic: add *_dec_not_zero   Ralf Baechle
• [PATCH 3/11] arch/arm/mach-s3c64xx/dma.c: trivial: use BUG_ON   Julia Lawall
• at91sam9g45: MMC: Issues with MMC driver   Prasant J
  • at91sam9g45: MMC: Issues with MMC driver   Russell King - ARM Linux
    • at91sam9g45: MMC: Issues with MMC driver   Prasant J
• [BUGFIX][PATCH] Fix double inversion bug in clk_disable()   Lothar Waßmann
• [PATCH] at91: add support for RSIs EWS board   Josef Holzmayr
  • [PATCH] at91: add support for RSIs EWS board   Nicolas Ferre
• [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.   Kautuk Consul
  • [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.   Mel Gorman
    • [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.   Kautuk Consul
      • [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.   Mel Gorman
      • [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.   Kautuk Consul
      • [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.   Mel Gorman
      • [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.   Kautuk Consul
      • [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.   Mel Gorman
      • [PATCH] ARM: sparsemem: Enable CONFIG_HOLES_IN_ZONE config option for SparseMem and HAS_HOLES_MEMORYMODEL for linux-3.0.   Kautuk Consul
• [PULL] at91 init factorize   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] at91 init factorize   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Build a uImage with dtb already appended   Grant Likely
  • [PATCH] fix for: Build a uImage with dtb already appended   Nicolas Ferre
• [PATCH] mach-davinci: fix cache flush build error   Linus Walleij
  • [PATCH] mach-davinci: fix cache flush build error   Russell King - ARM Linux
    • [PATCH] mach-davinci: fix cache flush build error   Nori, Sekhar
      • [PATCH] mach-davinci: fix cache flush build error   Russell King - ARM Linux
      • [PATCH] mach-davinci: fix cache flush build error   Linus Walleij
      • [PATCH] mach-davinci: fix cache flush build error   Nori, Sekhar
  • [PATCH] mach-davinci: fix cache flush build error   Linus Walleij
• Question about "Inconsistent kallsyms data"   Paulo Marques
• [PATCH RESEND] ASoC: sgtl5000: fix cache handling   Wolfram Sang
  • [PATCH RESEND] ASoC: sgtl5000: fix cache handling   Liam Girdwood
  • [PATCH RESEND] ASoC: sgtl5000: fix cache handling   Mark Brown
• [PATCH] Fix for AMBA PL011 serial driver (tx_empty logic)   Simon Budig
  • [PATCH] Fix logic of tx_empty.   Simon Budig
• [PATCH 0/4] Add device tree enabled Exynos4 machine   Thomas Abraham
  • [PATCH 1/4] serial: samsung: Keep a copy of the location of platform data in driver's private data   Thomas Abraham
  • [PATCH 2/4] serial: s5pv210: Add device tree support   Thomas Abraham
    • [PATCH 2/4] serial: s5pv210: Add device tree support   Ben Dooks
      • [PATCH 2/4] serial: s5pv210: Add device tree support   Thomas Abraham
      • [PATCH 2/4] serial: s5pv210: Add device tree support   Thomas Abraham
  • [PATCH 3/4] arm: exynos4: Add a new Exynos4 device tree enabled machine   Thomas Abraham
  • [PATCH 4/4] arm: dts: Add device tree source file for Exynos4 platforms   Thomas Abraham
• Remaining omap pull requests   Kevin Hilman
  • Remaining omap pull requests   Kevin Hilman
    • Remaining omap pull requests   Tony Lindgren
      • Remaining omap pull requests   Arnd Bergmann
• [PATCHv5 1/3] OMAP: I2C: Reset support   Kevin Hilman
  • [PATCHv5 1/3] OMAP: I2C: Reset support   Shubhrajyoti
    • [PATCHv5 1/3] OMAP: I2C: Reset support   Kevin Hilman
• [PATCHv5 2/3] OMAP: I2C: Remove the reset in the init path   Kevin Hilman
  • [PATCHv5 2/3] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti
• [PATCH] ep93xx: use DEFINE_RES_* helpers   H Hartley Sweeten
  • [PATCH] ep93xx: use DEFINE_RES_* helpers   Mika Westerberg
    • [PATCH] ep93xx: use DEFINE_RES_* helpers   H Hartley Sweeten
• [PATCH v2 1/1] ARM: mxc: fix card interrupt losing issue on freescale eSDHC   Chris Ball
  • [PATCH v2 1/1] ARM: mxc: fix card interrupt losing issue on freescale eSDHC   Lin Tony-B19295
• [PATCH 3.1 0/4] ARM: simpad: Add support for GPIO attached hardware   Bryan Wu
  • [PATCH 3.1 0/4] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
    • [PATCH 3.1 0/4] ARM: simpad: Add support for GPIO attached hardware   Kristoffer Ericson
      • [PATCH 3.1 0/4] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [PATCH v6 0/6] mc13783: add pwr button support   Philippe Rétornaz
• [PATCH RESEND] omap1: select GENERIC_IRQ_CHIP for TI OMAP1   Axel Lin
  • [PATCH RESEND] omap1: select GENERIC_IRQ_CHIP for TI OMAP1   Kevin Hilman
• [PATCH] mfd:fix section mismatch in ab3550-core   Wanlong Gao
  • [PATCH] mfd:fix section mismatch in ab3550-core   Uwe Kleine-König
    • [PATCH v2] mfd:fix section mismatch warning in ab3550-core   Wanlong Gao
      • [PATCH v2] mfd:fix section mismatch warning in ab3550-core   Linus Walleij
      • [PATCH v2] mfd:fix section mismatch warning in ab3550-core   Uwe Kleine-König
    • [PATCH v3] mfd:fix section mismatch warning in ab3550-core   Wanlong Gao
      • [PATCH v3] mfd:fix section mismatch warning in ab3550-core   Samuel Ortiz
• [PATCH v2 00/17] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
  • [PATCH 01/17] leds: create a trigger for CPU activity   Bryan Wu
    • [PATCH 01/17] leds: create a trigger for CPU activity   Michał Mirosław
      • [PATCH 01/17] leds: create a trigger for CPU activity   Bryan Wu
    • [PATCH 01/17] leds: create a trigger for CPU activity   Jamie Iles
      • [PATCH 01/17] leds: create a trigger for CPU activity   Linus Walleij
      • [PATCH 01/17] leds: create a trigger for CPU activity   Jamie Iles
      • [PATCH 01/17] leds: create a trigger for CPU activity   Jochen Friedrich
      • [PATCH 01/17] leds: create a trigger for CPU activity   Linus Walleij
      • [PATCH 01/17] leds: create a trigger for CPU activity   Bryan Wu
  • [PATCH 02/17] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers   Bryan Wu
  • [PATCH 03/17] mach-realview and mach-versatile: retire custom LED code   Bryan Wu
    • [PATCH 03/17] mach-realview and mach-versatile: retire custom LED code   Russell King - ARM Linux
      • [PATCH 03/17] mach-realview and mach-versatile: retire custom LED code   Bryan Wu
  • [PATCH 04/17] mach-ks8695: remove leds driver, since nobody use it   Bryan Wu
  • [PATCH 05/17] mach-shark: retire custom LED code   Bryan Wu
  • [PATCH 06/17] mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger   Bryan Wu
  • [PATCH 07/17] mach-integrator: introduce cm_read function helper to read CM_CTRL register   Bryan Wu
    • [PATCH 07/17] mach-integrator: introduce cm_read function helper to read CM_CTRL register   Sergei Shtylyov
      • [PATCH 07/17] mach-integrator: introduce cm_read function helper to read CM_CTRL register   Bryan Wu
    • [PATCH 07/17] mach-integrator: introduce cm_read function helper to read CM_CTRL register   Sergei Shtylyov
  • [PATCH 08/17] mach-integrator: retire custom LED code   Bryan Wu
  • [PATCH 09/17] mach-clps711x: retire custom LED code of P720T machine   Bryan Wu
  • [PATCH 10/17] mach-ebsa110: retire custom LED code   Bryan Wu
  • [PATCH 11/17] mach-footbridge: retire custom LED code   Bryan Wu
  • [PATCH 12/17] mach-pxa: retire custom LED code   Bryan Wu
  • [PATCH 13/17] plat-samsung: remove including old leds event API header file   Bryan Wu
  • [PATCH 14/17] mach-pnx4008: remove including old leds event API header file   Bryan Wu
  • [PATCH 15/17] mach-omap1: retire custom LED code   Bryan Wu
  • [PATCH 16/17] mach-sa1100: retire custom LED code   Bryan Wu
  • [PATCH 17/17] ARM: use new LEDS CPU trigger stub to replace old one   Bryan Wu
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Wolfram Sang
  • [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
• spi/spi-pl022: Query on working of DMA mode   viresh kumar
  • spi/spi-pl022: Query on working of DMA mode   Linus Walleij
    • spi/spi-pl022: Query on working of DMA mode   viresh kumar
      • spi/spi-pl022: Query on working of DMA mode   Linus Walleij
      • spi/spi-pl022: Query on working of DMA mode   viresh kumar
• [PATCH 4/4] dt: i2c-omap: Convert i2c driver to use device tree   Cousson, Benoit
• [PATCH v3] davinci: Add wl1271/wlan support for AM18x   Nori, Sekhar
  • [PATCH v4] ARM: davinci: AM18x: Add wl1271/wlan support   Ido Yariv
    • [PATCH v4] ARM: davinci: AM18x: Add wl1271/wlan support   Jaya Kumar
      • [PATCH v4] ARM: davinci: AM18x: Add wl1271/wlan support   Ido Yariv
• [RFC/PATCH] ARM: mach-nuc93x: delete   Nicolas Pitre
• Shouldn't DT preserve pdev name and id to allow platform_match to work?   Cousson, Benoit
  • Shouldn't DT preserve pdev name and id to allow platform_match to work?   G, Manjunath Kondaiah
    • Shouldn't DT preserve pdev name and id to allow platform_match to work?   Cousson, Benoit
  • Shouldn't DT preserve pdev name and id to allow platform_match to work?   Grant Likely
    • Shouldn't DT preserve pdev name and id to allow platform_match to work?   Barry Song
      • Shouldn't DT preserve pdev name and id to allow platform_match to work?   Cousson, Benoit
      • Shouldn't DT preserve pdev name and id to allow platform_match to work?   Grant Likely
    • Shouldn't DT preserve pdev name and id to allow platform_match to work?   Cousson, Benoit
• [PATCH] mm: fix invalid loop for poison_init_mem   Jamie Iles
  • [PATCH] mm: fix invalid loop for poison_init_mem   Nicolas Pitre
  • [PATCH] mm: fix invalid loop for poison_init_mem   Stephen Boyd
• [PATCH] ARM: pxa: fix logic error in PJ4 iWMMXt handling   Lennert Buytenhek
  • [PATCH] ARM: pxa: fix logic error in PJ4 iWMMXt handling   Eric Miao
    • [PATCH] ARM: pxa: fix logic error in PJ4 iWMMXt handling   Haojian Zhuang
      • [PATCH] ARM: pxa: fix logic error in PJ4 iWMMXt handling   Haojian Zhuang
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   James Bottomley
• [PATCH 0/2] I2C: OMAP: misc. PM-related cleanups   Kevin Hilman
  • [PATCH 1/2] I2C: OMAP: remove unneccesary use of pdev   Kevin Hilman
    • [PATCH 1/2] I2C: OMAP: remove unneccesary use of pdev   Felipe Balbi
  • [PATCH 2/2] I2C: OMAP: remove dev->idle, use usage counting provided by runtime PM   Kevin Hilman
    • [PATCH 2/2] I2C: OMAP: remove dev->idle, use usage counting provided by runtime PM   Felipe Balbi
      • [PATCH 2/2] I2C: OMAP: remove dev->idle, use usage counting provided by runtime PM   Kevin Hilman
      • [PATCH 2/2] I2C: OMAP: remove dev->idle, use usage counting provided by runtime PM   Felipe Balbi
      • [PATCH 2/2] I2C: OMAP: remove dev->idle, use usage counting provided by runtime PM   Kevin Hilman
• [PATCH v4 2/2] ARM: l2x0: Add OF based initialization   Rob Herring
• [PATCH 1/1] davinci: dm646x: move vpif related code to driver core header from platform   Nori, Sekhar
• [PATCH] gpio: pl061: add DT binding support   Rob Herring
  • [PATCH] gpio: pl061: add DT binding support   Baruch Siach
  • [PATCH] gpio: pl061: add DT binding support   Grant Likely
    • [PATCH] gpio: pl061: add DT binding support   Rob Herring
  • [PATCH v2] gpio: pl061: add DT binding support   Rob Herring
    • [PATCH v2] gpio: pl061: add DT binding support   Baruch Siach
      • [PATCH v2] gpio: pl061: add DT binding support   Rob Herring
• [PATCH v2 3/3] dmaengine: imx-sdma: add device tree probe support   Koul, Vinod
  • [PATCH v2 3/3] dmaengine: imx-sdma: add device tree probe support   Koul, Vinod
    • [PATCH v2 3/3] dmaengine: imx-sdma: add device tree probe support   Shawn Guo
• [PATCH v2 0/3] Add device tree probe for imx-sdma driver   Koul, Vinod
  • [PATCH v2 0/3] Add device tree probe for imx-sdma driver   Shawn Guo
    • [PATCH v2 0/3] Add device tree probe for imx-sdma driver   Koul, Vinod
• [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   Koul, Vinod
  • [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   viresh kumar
    • [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   Koul, Vinod
      • [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   Russell King - ARM Linux
• [PATCH] dmaengine: add helper function for slave_single   Koul, Vinod
• No mach-type for SHEEVAD?   Linus Walleij
  • No mach-type for SHEEVAD?   Eric Miao
    • No mach-type for SHEEVAD?   Linus Walleij
      • No mach-type for SHEEVAD?   Haojian Zhuang
      • No mach-type for SHEEVAD?   Eric Miao
      • No mach-type for SHEEVAD?   Eric Miao
      • No mach-type for SHEEVAD?   Eric Miao
      • No mach-type for SHEEVAD?   Russell King - ARM Linux
      • No mach-type for SHEEVAD?   Eric Miao
      • No mach-type for SHEEVAD?   Tanmay Upadhyay
• [PATCH v5 00/22] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
  • [PATCH v5 01/22] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
    • [PATCH v5 01/22] gpio/omap: remove dependency on gpio_bank_count   Santosh
      • [PATCH v5 01/22] gpio/omap: remove dependency on gpio_bank_count   DebBarma, Tarun Kanti
  • [PATCH v5 02/22] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
    • [PATCH v5 02/22] gpio/omap: use flag to identify wakeup domain   Santosh
  • [PATCH v5 05/22] gpio/omap: handle save/restore ctx in GPIO driver   Tarun Kanti DebBarma
    • [PATCH v5 05/22] gpio/omap: handle save/restore ctx in GPIO driver   Santosh
      • [PATCH v5 05/22] gpio/omap: handle save/restore ctx in GPIO driver   Santosh
  • [PATCH v5 10/22] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
    • [PATCH v5 10/22] gpio/omap: use level/edge detect reg offsets   Santosh
  • [PATCH v5 12/22] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
    • [PATCH v5 12/22] gpio/omap: cleanup set_gpio_triggering function   Santosh
  • [PATCH v5 14/22] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
    • [PATCH v5 14/22] gpio/omap: use pinctrl offset instead of macro   Santosh
  • [PATCH v5 21/22] gpio/omap: skip operations in runtime callbacks   Tarun Kanti DebBarma
    • [PATCH v5 21/22] gpio/omap: skip operations in runtime callbacks   Santosh
• [PATCH v5 03/22] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
  • [PATCH v5 03/22] gpio/omap: make gpio_context part of gpio_bank structure   Santosh
    • [PATCH v5 03/22] gpio/omap: make gpio_context part of gpio_bank structure   Kevin Hilman
      • [PATCH v5 03/22] gpio/omap: make gpio_context part of gpio_bank structure   DebBarma, Tarun Kanti
      • [PATCH v5 03/22] gpio/omap: make gpio_context part of gpio_bank structure   Santosh
• [PATCH v5 04/22] gpio/omap: fix pwrdm_post_transition call sequence   Tarun Kanti DebBarma
  • [PATCH v5 04/22] gpio/omap: fix pwrdm_post_transition call sequence   Santosh
• [PATCH v5 06/22] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
  • [PATCH v5 06/22] gpio/omap: make non-wakeup GPIO part of pdata   Santosh
• [PATCH v5 07/22] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
  • [PATCH v5 07/22] gpio/omap: avoid cpu checks during module ena/disable   Santosh
• [PATCH v5 08/22] gpio/omap: further cleanup using wakeup_status register   Tarun Kanti DebBarma
  • [PATCH v5 08/22] gpio/omap: further cleanup using wakeup_status register   Santosh
• [PATCH v5 09/22] gpio/omap: cleanup omap1 related macros   Tarun Kanti DebBarma
  • [PATCH v5 09/22] gpio/omap: cleanup omap1 related macros   Santosh
• [PATCH v5 11/22] gpio/omap: remove hardcoded offsets in ctxt save/restore   Tarun Kanti DebBarma
  • [PATCH v5 11/22] gpio/omap: remove hardcoded offsets in ctxt save/restore   Santosh
• [PATCH v5 13/22] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
  • [PATCH v5 13/22] gpio/omap: cleanup omap_gpio_mod_init function   Santosh
• [PATCH v5 15/22] gpio/omap: use readl in irq_handler for all access   Tarun Kanti DebBarma
  • [PATCH v5 15/22] gpio/omap: use readl in irq_handler for all access   Santosh
• [PATCH v5 16/22] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
  • [PATCH v5 16/22] gpio/omap: remove bank->method & METHOD_* macros   Santosh
• [PATCH v5 17/22] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
  • [PATCH v5 17/22] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Santosh
• [PATCH v5 18/22] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
  • [PATCH v5 18/22] gpio/omap: use pm-runtime framework   Santosh
    • [PATCH v5 18/22] gpio/omap: use pm-runtime framework   Rajendra Nayak
      • [PATCH v5 18/22] gpio/omap: use pm-runtime framework   Santosh
• [PATCH v5 19/22] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
  • [PATCH v5 19/22] gpio/omap: optimize suspend and resume functions   Santosh
• [PATCH v5 20/22] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
  • [PATCH v5 20/22] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Santosh
• [PATCH v5 22/22] gpio/omap: remove omap_gpio_save_context overhead   Tarun Kanti DebBarma
  • [PATCH v5 22/22] gpio/omap: remove omap_gpio_save_context overhead   Santosh
• [PATCH] imx5: not include the unused head file   Jason Liu
  • [PATCH] imx5: not include the unused head file   Jason Liu
  • [PATCH] imx5: not include the unused head file   Sascha Hauer
• [PATCH] ARM: OMAP2+ Add Primview dispalys to panel-generic   Tomi Valkeinen
• [RFC][PATCH 0/1 v3] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
  • [RFC][PATCH 1/1 v3] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
    • [RFC][PATCH 1/1 v3] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Russell King - ARM Linux
• [PATCH 00/12] Remove timex.h from sub-arch headers   Deepak Saxena
• [PATCH 01/12] ARM: Remove LATCH reference for time-acorn.c   Deepak Saxena
  • [PATCH 01/12] ARM: Remove LATCH reference for time-acorn.c   Russell King - ARM Linux
  • [PATCH 01/12] ARM: Remove LATCH reference for time-acorn.c   Russell King - ARM Linux
    • [PATCH 01/12] ARM: Remove LATCH reference for time-acorn.c   Deepak Saxena
• [PATCH 02/12] ARM: at91: Remove LATCH and CLOCK_TICK_RATE dependency   Deepak Saxena
• [PATCH 03/12] ARM: unicore32: Remove depency on LATCH   Deepak Saxena
  • [PATCH 03/12] ARM: unicore32: Remove depency on LATCH   Deepak Saxena
• [PATCH 04/12] ARM: clps711x: Remove LATCH and CLOCK_TICK_RATE dependency   Deepak Saxena
• [PATCH 05/12] ARM: h720x: Remove LATCH and CLOCK_TICK_RATE dependency   Deepak Saxena
• [PATCH 06/12] ARM: IXP23xx: Remove LATCH and CLOCK_TICK_RATE dependency   Deepak Saxena
  • [PATCH 06/12] ARM: IXP23xx: Remove LATCH and CLOCK_TICK_RATE dependency   Lennert Buytenhek
• [PATCH 07/12] ARM: IXP4x: Remove LATCH and CLOCK_TICK_RATE dependency   Deepak Saxena
• [PATCH 08/12] ARM: ks8695: Remove LATCH and CLOCK_TICK_RATE dependency   Deepak Saxena
• [PATCH 09/12] ARM: netx: Remove LATCH and CLOCK_TICK_RATE dependency   Deepak Saxena
• [PATCH 10/12] ARM: pnx4000: Remove LATCH and CLOCK_TICK_RATE dependency   Deepak Saxena
• [PATCH 11/12] ARM: sa1100: Remove LATCH and CLOCK_TICK_RATE dependency   Deepak Saxena
• [PATCH 12/12] ARM: Remove mach-*/include/mach/timex.h   Deepak Saxena
  • [PATCH 12/12] ARM: Remove mach-*/include/mach/timex.h   Linus Walleij
  • [PATCH 12/12] ARM: Remove mach-*/include/mach/timex.h   H Hartley Sweeten
    • [PATCH 12/12] ARM: Remove mach-*/include/mach/timex.h   H Hartley Sweeten
• [PATCH v2 0/2] I2C: OMAP: misc. PM-related cleanups   Kevin Hilman
  • [PATCH v2 1/2] I2C: OMAP: remove unneccesary use of pdev   Kevin Hilman
  • [PATCH v2 2/2] I2C: OMAP: remove dev->idle, use usage counting provided by runtime PM   Kevin Hilman
  • [PATCH 3/2] I2C: OMAP: remove unused function pointers from pdata   Kevin Hilman
• [PATCH 0/6] OMAP: misc. PM-related fixes for v3.1-rc   Kevin Hilman
  • [PATCH 1/6] OMAP2+: Kconfig: don't select PM in OMAP2PLUS_TYPICAL   Kevin Hilman
  • [PATCH 2/6] OMAP3+: SR: ensure pm-runtime callbacks can be invoked with IRQs disabled   Kevin Hilman
  • [PATCH 3/6] OMAP1: enable GENERIC_IRQ_CHIP   Kevin Hilman
  • [PATCH 4/6] OMAP3: beagle: don't touch omap_device internals   Kevin Hilman
  • [PATCH 5/6] OMAP2+: PM: SmartReflex: use put_sync_suspend for IRQ-safe disabling   Kevin Hilman
  • [PATCH 6/6] OMAP: McBSP: use existing macros for converting between devices   Kevin Hilman
    • [PATCH 6/6] OMAP: McBSP: use existing macros for converting between devices   Jarkko Nikula
      • [PATCH 6/6] OMAP: McBSP: use existing macros for converting between devices   Kevin Hilman
  • [PATCH 0/6] OMAP: misc. PM-related fixes for v3.1-rc   Tony Lindgren
    • [PATCH 0/6] OMAP: misc. PM-related fixes for v3.1-rc   Tony Lindgren
• [PATCH] ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage   Ben Dooks
  • [PATCH] ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage   Amit Kucheria
  • [PATCH] ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage   Sascha Hauer
• [RFC PATCH] mmc: at91_mci: remove the use of irq_to_gpio   Nicolas Ferre
  • [RFC PATCH] mmc: at91_mci: remove the use of irq_to_gpio   Sergei Shtylyov
  • [RFC PATCH] mmc: at91_mci: remove the use of irq_to_gpio   Ben Dooks
  • [RFC PATCH] mmc: at91_mci: remove the use of irq_to_gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] AM3517: Booting up   Abhilash K V
• [PATCH 1/2] AM35x: Using OMAP3 generic hwmods   Abhilash K V
• [PATCH 2/2] omap_twl: Prevent SR to enable for am3517/am3505 devices   Abhilash K V
  • [PATCH 2/2] omap_twl: Prevent SR to enable for am3517/am3505 devices   Kevin Hilman
    • [PATCH 2/2] omap_twl: Prevent SR to enable for am3517/am3505 devices   Koyamangalath, Abhilash
      • [PATCH 2/2] omap_twl: Prevent SR to enable for am3517/am3505 devices   Kevin Hilman
• [PATCH] cpuidle: Consistent spelling of cpuidle_idle_call()   David Brown
  • [PATCH] cpuidle: Consistent spelling of cpuidle_idle_call()   Stephen Boyd
    • [PATCH] cpuidle: Consistent spelling of cpuidle_idle_call()   Mark Brown
  • [PATCH] cpuidle: Consistent spelling of cpuidle_idle_call()   Sergei Shtylyov
• [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA   Linus Walleij
  • [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA   Koul, Vinod
    • [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA   Kukjin Kim
      • [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA   Koul, Vinod
      • [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA   Kukjin Kim
      • [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA   Koul, Vinod
      • [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA   Kukjin Kim
      • [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA   Koul, Vinod
• PL08x driver in arch/arm/mach-pnx4008/dma.c   Linus Walleij
• [PATCH 1/2] TI816X: Add minimal hwmod data   Pedanekar, Hemant
• [PATCH 3/4] TI816X: clock: Add clockdomains and powerdomains data   Pedanekar, Hemant
• [PATCH 0/3] Add support for TI814X processor series   Hemant Pedanekar
  • [PATCH 0/3] Add support for TI814X processor series   Pedanekar, Hemant
    • [PATCH 0/3] Add support for TI814X processor series   Pedanekar, Hemant
      • [PATCH 0/3] Add support for TI814X processor series   Pedanekar, Hemant
• [PATCH 1/3] TI81XX: Prepare for addition of TI814X support   Hemant Pedanekar
• [PATCH 2/3] TI814X: Add cpu type macros and detection support   Hemant Pedanekar
  • [PATCH 2/3] TI814X: Add cpu type macros and detection support   Tony Lindgren
    • [PATCH 2/3] TI814X: Add cpu type macros and detection support   Pedanekar, Hemant
• [PATCH 3/3] TI814X: Create board support and enable build for TI8148 EVM   Hemant Pedanekar
  • [PATCH 3/3] TI814X: Create board support and enable build for TI8148 EVM   Tony Lindgren
    • [PATCH 3/3] TI814X: Create board support and enable build for TI8148 EVM   Pedanekar, Hemant
  • [PATCH 3/3] TI814X: Create board support and enable build for TI8148 EVM   Kevin Hilman
• [PATCH 2/2 V2] OMAP3+: PM: SR: add suspend/resume handlers   Kevin Hilman
• [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it   Stephen Warren
  • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Stephen Warren
    • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Mark Brown
      • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Stephen Warren
      • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Mark Brown
      • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Ben Dooks
      • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Mark Brown
      • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Stephen Warren
      • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Mark Brown
    • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Rob Herring
      • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Stephen Warren
    • [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Ben Dooks
  • [PATCH 2/3] mmc: tegra: Don't gpio_request GPIOs used as IRQs.   Stephen Warren
  • [PATCH 3/3] ASoC: jack_add_gpios: Don't gpio_request GPIOs used as IRQs.   Stephen Warren
  • [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it   Ben Dooks
  • [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it   Russell King - ARM Linux
    • [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it   Ben Dooks
      • [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it   Linus Walleij
    • [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it   Stephen Warren
      • [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it   Russell King - ARM Linux
      • [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it   Stephen Warren
      • [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it   Russell King - ARM Linux
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Matt Sealey
  • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   David Brown
    • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Matt Sealey
      • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Scott Wood
      • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   David Brown
      • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Matt Sealey
      • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Scott Wood
      • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Grant Likely
      • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Russell King - ARM Linux
  • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Grant Likely
    • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Mitch Bradley
      • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Mark Brown
  • [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Sascha Hauer
• [PATCH RFC v1] ARM: olpc: Add support for calling into the XO-1.75's OpenFirmware (OFW)   Andres Salomon
  • [PATCH RFC v1] ARM: olpc: Add support for calling into the XO-1.75's OpenFirmware (OFW)   Eric Miao
  • [PATCH RFC v1] ARM: olpc: Add support for calling into the XO-1.75's OpenFirmware (OFW)   Ben Dooks
    • [PATCH RFC v1] ARM: olpc: Add support for calling into the XO-1.75's OpenFirmware (OFW)   Andres Salomon
  • [PATCH RFC v1] ARM: olpc: Add support for calling into the XO-1.75's OpenFirmware (OFW)   Russell King - ARM Linux
• [linux-pm] [RFC/PATCH v2] PM / Runtime: allow _put_sync() from interrupts-disabled context   Kevin Hilman
  • [linux-pm] [RFC/PATCH v2] PM / Runtime: allow _put_sync() from interrupts-disabled context   Rafael J. Wysocki
    • [linux-pm] [RFC/PATCH v2] PM / Runtime: allow _put_sync() from interrupts-disabled context   Kevin Hilman
• [PATCH v2 2/6] OMAP4: ID: add omap_has_feature for max freq supported   Menon, Nishanth
• [RFC PATCH 0/2] ARM: CSR: add rtciobrg and PM sleep entry   Barry Song
• [RFC PATCH 1/2] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Barry Song
  • [RFC PATCH 1/2] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Jamie Iles
    • [RFC PATCH 1/2] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Barry Song
      • [RFC PATCH 1/2] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Jamie Iles
      • [RFC PATCH 1/2] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Barry Song
• [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
  • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Arnd Bergmann
    • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Arnd Bergmann
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Arnd Bergmann
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
  • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Russell King - ARM Linux
    • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Russell King - ARM Linux
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Russell King - ARM Linux
      • [RFC PATCH 2/2] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
• [PATCH] CPUIDLE: fix compiling error for ARM and SH   Barry Song
  • [PATCH] CPUIDLE: fix compiling error for ARM and SH   Barry Song
• [PATCHv6 1/3] OMAP: I2C: Reset support   Shubhrajyoti D
  • [PATCHv6 2/3] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti D
    • [PATCHv6 2/3] OMAP: I2C: Remove the reset in the init path   Kevin Hilman
      • [PATCHv6 2/3] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti
  • [PATCHv6 3/3] OMAP: I2C: Remove the SYSC register definition   Shubhrajyoti D
  • [PATCHv6 1/3] OMAP: I2C: Reset support   Kevin Hilman
    • [PATCHv6 1/3] OMAP: I2C: Reset support   Shubhrajyoti
• [patch 1/1] iMX: Fix build for iMX53   Arnaud Patard (Rtp)
  • [patch 1/1] iMX: Fix build for iMX53   Uwe Kleine-König
  • [patch 1/1] iMX: Fix build for iMX53   Sergei Shtylyov
• [PATCH] ARM: GIC: Add device tree interrupt specifier translation support   Thomas Abraham
  • [PATCH] ARM: GIC: Add device tree interrupt specifier translation support   Marc Zyngier
  • [PATCH] ARM: GIC: Add device tree interrupt specifier translation support   Russell King - ARM Linux
• [PATCH] fix cpuidle_xxx functions name mismatch   Alexander Smirnov
  • [PATCH] fix cpuidle_xxx functions name mismatch   Russell King - ARM Linux
• [RFC] using amba_pl08x driver for s3c64xx SoCs   Linus Walleij
  • [RFC] using amba_pl08x driver for s3c64xx SoCs   Alim Akhtar
    • [RFC] using amba_pl08x driver for s3c64xx SoCs   Linus Walleij
      • [RFC] using amba_pl08x driver for s3c64xx SoCs   viresh kumar
      • [RFC] using amba_pl08x driver for s3c64xx SoCs   Alim Akhtar
      • [RFC] using amba_pl08x driver for s3c64xx SoCs   Linus Walleij
    • [RFC] using amba_pl08x driver for s3c64xx SoCs   viresh kumar
• [PATCH V3 00/20] dmaengine/amba-pl08x updates   Viresh Kumar
  • [PATCH V3 03/20] dmaengine/amba-pl08x: Rearrange inclusion of header files in ascending order   Viresh Kumar
  • [PATCH V3 09/20] dmaengine/amba-pl08x: Simplify pl08x_ensure_on()   Viresh Kumar
  • [PATCH V3 12/20] dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()   Viresh Kumar
  • [PATCH V3 13/20] dmaengine/amba-pl08x: max_bytes_per_lli is TRANSFER_SIZE * src_width (not MIN(width))   Viresh Kumar
  • [PATCH V3 15/20] dmaengine/amba-pl08x: Align lli_len to max(src.width, dst.width)   Viresh Kumar
  • [PATCH V3 16/20] dmaengine/amba-pl08x: Choose peripheral bus as master bus   Viresh Kumar
  • [PATCH V3 00/20] dmaengine/amba-pl08x updates   Linus Walleij
    • [PATCH V3 00/20] dmaengine/amba-pl08x updates   Koul, Vinod
• [PATCH V3 01/20] ARM: asm/pl080.h: Protect against multiple inclusion of header file   Viresh Kumar
• [PATCH V3 02/20] dmaengine/amba-pl08x: Resolve formatting issues   Viresh Kumar
• [PATCH V3 04/20] dmaengine/amba-pl08x: pass (*ptr) to sizeof() instead of (struct xyz)   Viresh Kumar
• [PATCH V3 05/20] dmaengine/amba-pl08x: Complete doc comment for struct pl08x_txd   Viresh Kumar
• [PATCH V3 06/20] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   Viresh Kumar
• [PATCH V3 07/20] dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_info   Viresh Kumar
• [PATCH V3 08/20] dmaengine/amba-pl08x: support runtime PM   Viresh Kumar
• [PATCH V3 10/20] dmaengine/amba-pl08x: No need to check "ch->signal < 0"   Viresh Kumar
• [PATCH V3 11/20] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   Viresh Kumar
• [PATCH V3 14/20] dmaengine/amba-pl08x: Add prep_single_byte_llis() routine   Viresh Kumar
• [PATCH V3 17/20] dmaengine/amba-pl08x: Pass flow controller information with slave channel data   Viresh Kumar
• [PATCH V3 18/20] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
• [PATCH V3 19/20] dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool   Viresh Kumar
• [PATCH V3 20/20] dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling kfree() directly   Viresh Kumar
• [PATCH] mach-sa1100: fix PCI build problem   Linus Walleij
  • [PATCH] mach-sa1100: fix PCI build problem   Linus Walleij
    • [PATCH] mach-sa1100: fix PCI build problem   Arnd Bergmann
• [PATCH] dmaengine: at_hdmac: fix way to specify cyclic capability   Nicolas Ferre
• [PATCH] dmaengine: at_hdmac: add device tree probe   Nicolas Ferre
  • [PATCH] dmaengine: at_hdmac: add device tree probe   Grant Likely
    • [PATCH] dmaengine: at_hdmac: add device tree probe   Nicolas Ferre
      • [PATCH] dmaengine: at_hdmac: add device tree probe   Koul, Vinod
• GPMI-NAND Status?   Wolfram Sang
  • GPMI-NAND Status?   Huang Shijie
    • GPMI-NAND Status?   Koen Beel
      • GPMI-NAND Status?   Huang Shijie
      • GPMI-NAND Status?   Koen Beel
      • GPMI-NAND Status?   Huang Shijie
      • GPMI-NAND Status?   Koen Beel
      • GPMI-NAND Status?   Huang Shijie
      • GPMI-NAND Status?   Koen Beel
      • GPMI-NAND Status?   Huang Shijie
      • GPMI-NAND Status?   Koen Beel
      • GPMI-NAND Status?   Huang Shijie
      • GPMI-NAND Status?   Wolfram Sang
    • GPMI-NAND Status?   Wolfram Sang
      • GPMI-NAND Status?   Huang Shijie
      • GPMI-NAND Status?   Wolfram Sang
  • GPMI-NAND Status?   Huang Shijie
    • GPMI-NAND Status?   Wolfram Sang
      • GPMI-NAND Status?   Huang Shijie
      • GPMI-NAND Status?   Lothar Waßmann
  • GPMI-NAND Status?   Ivan Djelic
    • GPMI-NAND Status?   Wolfram Sang
    • GPMI-NAND Status?   Lothar Waßmann
      • GPMI-NAND Status?   Lin Tony-B19295
      • GPMI-NAND Status?   Ivan Djelic
      • GPMI-NAND Status?   Ivan Djelic
      • GPMI-NAND Status?   Lothar Waßmann
      • GPMI-NAND Status?   Ivan Djelic
      • GPMI-NAND Status?   Lothar Waßmann
      • GPMI-NAND Status?   Artem Bityutskiy
      • GPMI-NAND Status?   Artem Bityutskiy
    • GPMI-NAND Status?   Artem Bityutskiy
      • GPMI-NAND Status?   Ivan Djelic
• [PATCH] OMAP: omap_device: make latency autoadjust messages debug   Kevin Hilman
• [PATCH] ARM: iMX5: Don't enable DPLL if it already enabled   Jason Liu
• AT91: dt: basic device tree showcase   Nicolas Ferre
  • [RFC PATCH 1/2] AT91: dt: at91sam9g45 family and board device tree files   Nicolas Ferre
    • [RFC PATCH 1/2] AT91: dt: at91sam9g45 family and board device tree files   Grant Likely
  • [RFC PATCH 2/2] AT91: dt: simple device tree support for at91sam9g45 family   Nicolas Ferre
    • [RFC PATCH 2/2] AT91: dt: simple device tree support for at91sam9g45 family   Grant Likely
      • [RFC PATCH 2/2] AT91: dt: simple device tree support for at91sam9g45 family   Nicolas Ferre
• [PATCH 1/2] gpio/tegra: Remove use of irq_to_gpio   Stephen Warren
  • [PATCH 2/2] arm/tegra: Delete irq_to_gpio   Stephen Warren
    • [PATCH 2/2] arm/tegra: Delete irq_to_gpio   Grant Likely
      • [PATCH 2/2] arm/tegra: Delete irq_to_gpio   Stephen Warren
      • [PATCH 2/2] arm/tegra: Delete irq_to_gpio   Olof Johansson
      • [PATCH 2/2] arm/tegra: Delete irq_to_gpio   Grant Likely
      • [PATCH 2/2] arm/tegra: Delete irq_to_gpio   Russell King - ARM Linux
      • [PATCH 2/2] arm/tegra: Delete irq_to_gpio   Grant Likely
• [PATCH 0/9] OMAP: omap_device cleanups, decouple platform_device for v3.2   Kevin Hilman
  • [PATCH 1/9] omap: mcbsp: Remove omap device API   Kevin Hilman
  • [PATCH 2/9] OMAP: omap_device: replace debug/warning/error prints with dev_* macros   Kevin Hilman
  • [PATCH 3/9] OMAP: omap_device: make latency autoadjust messages debug   Kevin Hilman
  • [PATCH 4/9] OMAP: omap_device: remove internal functions from omap_device.h   Kevin Hilman
  • [PATCH 5/9] OMAP: omap_device: when building return platform_device instead of omap_device   Kevin Hilman
  • [PATCH 6/9] OMAP: omap_device: device register functions now take platform_device pointer   Kevin Hilman
  • [PATCH 7/9] OMAP: omap_device: _disable_idle_on_suspend() takes platform_device pointer   Kevin Hilman
  • [PATCH 8/9] ARM: platform_device: pdev_archdata: add omap_device pointer   Kevin Hilman
    • [PATCH 8/9] ARM: platform_device: pdev_archdata: add omap_device pointer   Grant Likely
  • [PATCH 9/9] OMAP: omap_device: decouple platform_device from omap_device   Kevin Hilman
    • [PATCH 9/9] OMAP: omap_device: decouple platform_device from omap_device   Grant Likely
• ARM Maintainers workshop at Kernel Summit 2011   Grant Likely
  • [Ksummit-2011-discuss] ARM Maintainers workshop at Kernel Summit 2011   Olof Johansson
    • experience with the new arm-soc workflow (Was: Re: [Ksummit-2011-discuss] ARM Maintainers workshop at Kernel Summit) 2011   Uwe Kleine-König
      • experience with the new arm-soc workflow (Was: Re: [Ksummit-2011-discuss] ARM Maintainers workshop at Kernel Summit) 2011   Nicolas Pitre
      • experience with the new arm-soc workflow (Was: Re: [Ksummit-2011-discuss] ARM Maintainers workshop at Kernel Summit) 2011   Michał Mirosław
      • experience with the new arm-soc workflow (Was: Re: [Ksummit-2011-discuss] ARM Maintainers workshop at Kernel Summit) 2011   David Brown
      • [Ksummit-2011-discuss] experience with the new arm-soc workflow (Was: Re: ARM Maintainers workshop at Kernel Summit) 2011   Steven Rostedt
      • [Ksummit-2011-discuss] experience with the new arm-soc workflow (Was: Re: ARM Maintainers workshop at Kernel Summit) 2011   Mark Brown
      • [Ksummit-2011-discuss] experience with the new arm-soc workflow (Was: Re: ARM Maintainers workshop at Kernel Summit) 2011   Steven Rostedt
      • [Ksummit-2011-discuss] experience with the new arm-soc workflow (Was: Re: ARM Maintainers workshop at Kernel Summit) 2011   Mark Brown
      • [Ksummit-2011-discuss] experience with the new arm-soc workflow (Was: Re: ARM Maintainers workshop at Kernel Summit) 2011   Arnd Bergmann
  • ARM Maintainers workshop at Kernel Summit 2011   Sascha Hauer
    • ARM Maintainers workshop at Kernel Summit 2011   Marek Vasut
      • ARM Maintainers workshop at Kernel Summit 2011   Pavel Machek
• [PATCH] ARM: Fix build error for SMP=n builds   Russell King - ARM Linux
• [PATCH] dmaengine: PL08x: Fix trivial build error   Russell King - ARM Linux
  • [PATCH] dmaengine: PL08x: Fix trivial build error   Koul, Vinod
  • [PATCH] dmaengine: PL08x: Fix trivial build error   Linus Walleij
• [PATCH] arm: mach-davinci: use kzalloc()   Thomas Meyer
• AT91SAM9261EK kit is broken, commit bd60299 has broken it   Remy Bohmer
  • AT91SAM9261EK kit is broken, commit bd60299 has broken it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pcmcia/pxa2xx_sharpsl: retain ops structure on collie   Dmitry Eremin-Solenikov
  • [PATCH] pcmcia/pxa2xx_sharpsl: retain ops structure on collie   Dmitry Eremin-Solenikov
    • [PATCH] pcmcia/pxa2xx_sharpsl: retain ops structure on collie   Eric Miao
      • [PATCH] pcmcia/pxa2xx_sharpsl: retain ops structure on collie   Pavel Machek
      • [PATCH] pcmcia/pxa2xx_sharpsl: retain ops structure on collie   Dmitry Eremin-Solenikov
• [PATCH 0/5] ARM: tegra: paz00: updates for "for-next"   Marc Dietrich
  • [PATCH 1/5] ARM: tegra: paz00: add support serial port on JP1   Marc Dietrich
  • [PATCH 2/5] ARM: tegra: paz00: enable rfkill for internal wifi card   Marc Dietrich
  • [PATCH 3/5] ARM: tegra: paz00: enable wifi led   Marc Dietrich
  • [PATCH 4/5] ARM: tegra: paz00: add clocks required for usb operation   Marc Dietrich
    • [PATCH 4/5] ARM: tegra: paz00: add clocks required for usb operation   Stephen Warren
      • [PATCH 4/5] ARM: tegra: paz00: add clocks required for usboperation   Marc Dietrich
      • [PATCH 4/5] ARM: tegra: paz00: add clocks required for usboperation   Stephen Warren
      • [PATCH 4/5] ARM: tegra: paz00: add clocks required forusboperation   Marc Dietrich
    • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks required for usb operation   Marc Dietrich
      • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks required for usb operation   Olof Johansson
      • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks required for usb operation   Marc Dietrich
      • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks required for usb operation   Olof Johansson
      • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks required for usb operation   Stephen Warren
  • [PATCH 5/5] ARM: tegra: paz00: reorder the SDHCI channel init   Marc Dietrich
  • [PATCH 0/5] ARM: tegra: paz00: updates for "for-next"   Olof Johansson
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Barry Song
• [PATCH] GPIOLIB: add generic gpio_set_pull API   Barry Song
  • [PATCH] GPIOLIB: add generic gpio_set_pull API   Paul Mundt
    • [PATCH] GPIOLIB: add generic gpio_set_pull API   Grant Likely
      • [PATCH] GPIOLIB: add generic gpio_set_pull API   Kyungmin Park
      • [PATCH] GPIOLIB: add generic gpio_set_pull API   Rohit Vaswani
      • [PATCH] GPIOLIB: add generic gpio_set_pull API   Barry Song
      • [PATCH] GPIOLIB: add generic gpio_set_pull API   Linus Walleij
      • [PATCH] GPIOLIB: add generic gpio_set_pull API   Linus Walleij
      • [PATCH] GPIOLIB: add generic gpio_set_pull API   Linus Walleij
• [PATCH] ARM errata: Possible cache data corruption with hit-under-miss enabled   Siarhei Siamashka
  • [PATCH] ARM errata: Possible cache data corruption with hit-under-miss enabled   Catalin Marinas
    • [PATCH] ARM errata: Possible cache data corruption with hit-under-miss enabled   Siarhei Siamashka
      • [PATCH] ARM errata: Possible cache data corruption with hit-under-miss enabled   Catalin Marinas
      • [PATCH] ARM errata: Possible cache data corruption with hit-under-miss enabled   Siarhei Siamashka
      • [PATCH] ARM errata: Possible cache data corruption with hit-under-miss enabled   Catalin Marinas
      • [PATCH] ARM errata: Possible cache data corruption with hit-under-miss enabled   Siarhei Siamashka
• [GIT PULL] imx-fixes   Sascha Hauer
  • [GIT PULL] imx-fixes   Sascha Hauer
    • [GIT PULL] imx-fixes   Shawn Guo
  • [GIT PULL] imx-fixes   Arnd Bergmann
• [PATCH v2] OMAP2: PM debug: remove leftover debug code   Michael Jones
  • [PATCH v2] OMAP2: PM debug: remove leftover debug code   Kevin Hilman
• [PATCH V4] mmc: Enable the ADMA2 on esdhc imx driver   Richard Zhu
  • [PATCH V4] mmc: Enable the ADMA2 on esdhc imx driver   Eric Miao
    • [PATCH V4] mmc: Enable the ADMA2 on esdhc imx driver   Chris Ball
• RFC[PATCH 0/6] ARM: S5P64X0: Add SDHCI support using clkdev   Rajeshwari Shinde
  • RFC[PATCH 2/6] ARM: S5P64X0: Enable SDHCI device   Rajeshwari Shinde
  • RFC[PATCH 3/6] ARM: S5P64X0: Add pin-mux setup support for SDHCI   Rajeshwari Shinde
    • RFC[PATCH 3/6] ARM: S5P64X0: Add pin-mux setup support for SDHCI   Subash Patel
  • RFC[PATCH 4/6] ARM: S5P64X0: Populate default platform data for SDHCI devices   Rajeshwari Shinde
  • RFC[PATCH 5/6] ARM: S5P64X0: Enable SDHCI support   Rajeshwari Shinde
  • RFC[PATCH 6/6] ARM: S5P64X0: Add clkdev bus lookup support   Rajeshwari Shinde
    • RFC[PATCH 6/6] ARM: S5P64X0: Add clkdev bus lookup support   Sylwester Nawrocki
      • RFC[PATCH 6/6] ARM: S5P64X0: Add clkdev bus lookup support   Subash Patel
• RFC[PATCH 1/6] SDHCI: S3C: Use bus clocks created using clkdev   Rajeshwari Shinde
• [PATCH 3.2 0/4] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
  • [PATCH 3.2 1/4] ARM: simpad: Add ucb1x00 GPIO definitions and register GPIO   Jochen Friedrich
  • [PATCH 3.2 2/4] ARM: simpad: Cleanup CS3 accessors.   Jochen Friedrich
  • [PATCH 3.2 3/4] ARM: simpad: add GPIO based device definitions.   Jochen Friedrich
  • [PATCH 3.2 4/4] ARM: simpad: replace ARM specific LED code   Jochen Friedrich
  • [PATCH 3.2 0/4] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
    • [PATCH 3.2 0/4] ARM: simpad: Add support for GPIO attached hardware   Bryan Wu
      • [PATCH 3.2 0/4] ARM: simpad: Add support for GPIO attached hardware   Russell King - ARM Linux
      • [PATCH 3.2 0/4] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller   Barry Song
• [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller   Linus Walleij
• [PATCH] exynos4: universal: Use the correct regulator names   Kyungmin Park
  • [PATCH] exynos4: universal: Use the correct regulator names   Kukjin Kim
• [PATCH] arch:arm:plat-omap:iovmm: remove unused variable 'va'   Maxin B. John
  • [PATCH] arch:arm:plat-omap:iovmm: remove unused variable 'va'   Maxin B John
    • [PATCH] arch:arm:plat-omap:iovmm: remove unused variable 'va'   Tony Lindgren
• [PATCH] print_more_log   Huang Shijie
• [PATCH] print_more_log   Huang Shijie
• OMAP3 kernels fail to build   Russell King - ARM Linux
  • OMAP3 kernels fail to build   Santosh
    • OMAP3 kernels fail to build   Russell King - ARM Linux
      • OMAP3 kernels fail to build   Tony Lindgren
      • OMAP3 kernels fail to build   Paul Walmsley
      • OMAP3 kernels fail to build   Russell King - ARM Linux
      • OMAP3 kernels fail to build   Tony Lindgren
  • OMAP3 kernels fail to build   Péter Ujfalusi
  • [PATCH] OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds   Peter Ujfalusi
    • [PATCH] OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds   Tony Lindgren
      • [PATCH] OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds   Michael Jones
• [PATCH v5] Add ARM cpu topology definition   Russell King - ARM Linux
  • [PATCH v5] Add ARM cpu topology definition   Vincent Guittot
    • [PATCH v5] Add ARM cpu topology definition   Russell King - ARM Linux
      • [PATCH v5] Add ARM cpu topology definition   Vincent Guittot
• [PATCH v5] Add ARM cpu topology definition   Russell King - ARM Linux
• [PATCH] ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS device   Sylwester Nawrocki
  • [PATCH] ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS device   Sergei Shtylyov
    • [PATCH] ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS device   Kukjin Kim
• [RFC PATCH 08/15] ARM: perf: remove unnecessary armpmu->stop   Mark Rutland
• [PATCH 0/12] ARM: Remove define CONSISTENT_DMA_SIZE   Jon Medhurst
  • [PATCH 01/12] ARM: Add init_consistent_dma_size()   Jon Medhurst
    • [PATCH 01/12] ARM: Add init_consistent_dma_size()   Nicolas Pitre
  • [PATCH 05/12] ARM: mach-s5pv210: Setup consistent dma size at boot time   Jon Medhurst
    • [PATCH 05/12] ARM: mach-s5pv210: Setup consistent dma size at boot time   Pavel Machek
      • [PATCH 05/12] ARM: mach-s5pv210: Setup consistent dma size at boot time   Tixy
      • [PATCH 05/12] ARM: mach-s5pv210: Setup consistent dma size at boot time   Pavel Machek
  • Submitting patchset: ARM: Remove define CONSISTENT_DMA_SIZE   Tixy
    • Submitting patchset: ARM: Remove define CONSISTENT_DMA_SIZE   Nicolas Pitre
• [PATCH 02/12] ARM: omap: Setup consistent dma size at boot time   Jon Medhurst
• [PATCH 03/12] ARM: mach-s3c64xx: Setup consistent dma size at boot time   Jon Medhurst
• [PATCH 04/12] ARM: mach-s5p64x0: Setup consistent dma size at boot time   Jon Medhurst
• [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Jon Medhurst
  • [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Sascha Hauer
    • [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Tixy
    • [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Nicolas Pitre
      • [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Tixy
      • [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Sascha Hauer
      • [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Tixy
      • [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Sascha Hauer
      • [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Tixy
      • [PATCH 06/12] ARM: mxc: Setup consistent dma size at boot time   Sascha Hauer
• [PATCH 07/12] ARM: mach-davinci: Setup consistent dma size at boot time   Jon Medhurst
• [PATCH 08/12] ARM: mach-u300: Setup consistent dma size at boot time   Jon Medhurst
  • [PATCH 08/12] ARM: mach-u300: Setup consistent dma size at boot time   Linus Walleij
• [PATCH 09/12] ARM: mach-at91: Setup consistent dma size at boot time   Jon Medhurst
  • [PATCH 09/12] ARM: mach-at91: Setup consistent dma size at boot time   Nicolas Ferre
• [PATCH 10/12] ARM: mach-bcmring: Setup consistent dma size at boot time   Jon Medhurst
• [PATCH 11/12] ARM: mach-shmobile: Setup consistent dma size at boot time   Jon Medhurst
• [PATCH 12/12] ARM: Remove support for macro CONSISTENT_DMA_SIZE   Jon Medhurst
• [RFC] ARM: dma_map|unmap_sg plus iommu   Ramirez Luna, Omar
  • [RFC] ARM: dma_map|unmap_sg plus iommu   Marek Szyprowski
    • [RFC] ARM: dma_map|unmap_sg plus iommu   Ramirez Luna, Omar
• [PATCH] atmel_serial: fix atmel_default_console_device   Nikolaus Voss
  • [PATCH] atmel_serial: fix atmel_default_console_device   Sergei Shtylyov
    • [PATCH] atmel_serial: fix atmel_default_console_device   Voss, Nikolaus
    • [PATCH] atmel_serial: fix atmel_default_console_device   Voss, Nikolaus
      • [PATCH] atmel_serial: fix atmel_default_console_device   Sergei Shtylyov
      • [PATCH v2] atmel_serial: fix atmel_default_console_device   Voss, Nikolaus
• [RFC] ARM: dma_map|unmap_sg plus iommu   Ramirez Luna, Omar
  • [RFC] ARM: dma_map|unmap_sg plus iommu   Russell King - ARM Linux
  • [RFC] ARM: dma_map|unmap_sg plus iommu   Marek Szyprowski
• [PATCH 2/4] TI816X: clock: Add clock data   Pedanekar, Hemant
• [RFC PATCH] genirq: set pending flag for disabled level interrupt   Abhijeet Dharmapurikar
• [PATCH 0/6] Miscellaneous patches for 3.1 and 3.2   Will Deacon
  • [PATCH 2/6] ARM: realview: ensure visibility of writes during reset   Will Deacon
    • [PATCH 2/6] ARM: realview: ensure visibility of writes during reset   Rob Herring
      • [PATCH 2/6] ARM: realview: ensure visibility of writes during reset   Will Deacon
  • [PATCH 3/6] ARM: twd: register clockevents device before enabling PPI   Will Deacon
    • [PATCH 3/6] ARM: twd: register clockevents device before enabling PPI   Marc Zyngier
  • [PATCH 4/6] ARM: smp: set thread_info->cpu to hardware CPU number for boot thread   Will Deacon
    • [PATCH 4/6] ARM: smp: set thread_info->cpu to hardware CPU number for boot thread   Stephen Boyd
      • [PATCH 4/6] ARM: smp: set thread_info->cpu to hardware CPU number for boot thread   Will Deacon
      • [PATCH 4/6] ARM: smp: set thread_info->cpu to hardware CPU number for boot thread   Russell King - ARM Linux
      • [PATCH 4/6] ARM: smp: set thread_info->cpu to hardware CPU number for boot thread   Will Deacon
    • [PATCH 4/6] ARM: smp: set thread_info->cpu to hardware CPU number for boot thread   Sergei Shtylyov
      • [PATCH 4/6] ARM: smp: set thread_info->cpu to hardware CPU number for boot thread   Will Deacon
  • [PATCH 6/6] ARM: cache: detect PIPT I-cache using CTR   Will Deacon
• [PATCH 1/6] ARM: vexpress: determine active tile site before reading tile ID   Will Deacon
• [PATCH 5/6] ARM: cache: detect VIPT aliasing I-cache on ARMv6   Will Deacon
• [PATCH 0/5] ARM: hw_breakpoint: updates for 3.2   Will Deacon
  • [PATCH 2/5] ARM: hw_breakpoint: reserve one breakpoint for watchpoint stepping   Will Deacon
  • [PATCH 3/5] ARM: hw_breakpoint: add support for multiple watchpoints   Will Deacon
  • [PATCH 4/5] ARM: hw_breakpoint: reduce the number of WARN_ONCE invocations   Will Deacon
  • [PATCH 5/5] ARM: hw_breakpoint: trap undef instruction exceptions in reset_ctrl_regs   Will Deacon
• [PATCH 1/5] ARM: hw_breakpoint: add initial Cortex-A15 (debug v7.1) support   Will Deacon
  • [PATCH 1/5] ARM: hw_breakpoint: add initial Cortex-A15 (debug v7.1) support   Stephen Boyd
    • [PATCH 1/5] ARM: hw_breakpoint: add initial Cortex-A15 (debug v7.1) support   Will Deacon
• [PATCH 00/10] ARM: perf: updates for 3.2   Will Deacon
  • [PATCH 01/10] ARM: perf: de-const struct arm_pmu   Will Deacon
  • [PATCH 02/10] ARM: PMU: move CPU PMU platform device handling and init into perf   Will Deacon
  • [PATCH 03/10] ARM: perf: use cpumask_t to record active IRQs   Will Deacon
  • [PATCH 04/10] ARM: perf: use u32 instead of unsigned long for PMNC register   Will Deacon
  • [PATCH 05/10] ARM: perf: use integers for ARMv7 event indices   Will Deacon
  • [PATCH 06/10] ARM: perf: index ARMv7 event counters starting from zero   Will Deacon
  • [PATCH 07/10] ARM: perf: index Xscale and ARMv6 event counters starting from zero   Will Deacon
  • [PATCH 08/10] ARM: perf: index PMU registers from zero   Will Deacon
  • [PATCH 00/10] ARM: perf: updates for 3.2   Jamie Iles
    • [PATCH 00/10] ARM: perf: updates for 3.2   Will Deacon
      • [PATCH 00/10] ARM: perf: updates for 3.2   Jamie Iles
      • [PATCH 00/10] ARM: perf: updates for 3.2   Will Deacon
      • [PATCH 00/10] ARM: perf: updates for 3.2   Jean Pihet
      • [PATCH 00/10] ARM: perf: updates for 3.2   Will Deacon
• [PATCH 09/10] ARM: perf: allow armpmu to implement mode exclusion   Will Deacon
• [PATCH 10/10] ARM: perf: add mode exclusion for Cortex-A15 PMU   Will Deacon
• [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Jassi Brar
  • [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Heiko Stübner
    • [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Jassi Brar
      • [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Heiko Stübner
  • [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Alim Akhtar
    • [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Alim Akhtar
    • [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Russell King - ARM Linux
      • [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Alim Akhtar
  • [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Boojin Kim
• [PATCH 13/15] spi/s3c64xx: Merge dma control code   Jassi Brar
• 3.1-rc1 link failure   Rob Herring
  • 3.1-rc1 link failure   Russell King - ARM Linux
• [PATCH] dmaengine: pl330: add missing include of scatterlist.h   Rob Herring
  • [PATCH] dmaengine: pl330: add missing include of scatterlist.h   Jassi Brar
    • [PATCH] dmaengine: pl330: add missing include of scatterlist.h   Koul, Vinod
• [PATCH 14/15] ASoC: Samsung: Update DMA interface   Jassi Brar
  • [PATCH 14/15] ASoC: Samsung: Update DMA interface   Boojin Kim
• [PATCH v2 0/3] ARM: Tegra: Harmony & Seaboard USB and audio   Stephen Warren
  • [PATCH v2 1/3] ARM: Tegra: Harmony: Add USB device   Stephen Warren
  • [PATCH v2 2/3] ARM: Tegra: Seaboard board updates for audio   Stephen Warren
  • [PATCH v2 3/3] ARM: Tegra: Seaboard: Add USB devices   Stephen Warren
  • [PATCH v2 0/3] ARM: Tegra: Harmony & Seaboard USB and audio   Olof Johansson
    • [PATCH v2 0/3] ARM: Tegra: Harmony & Seaboard USB and audio   Stephen Warren
      • [PATCH v2 0/3] ARM: Tegra: Harmony & Seaboard USB and audio   Olof Johansson
• [PATCH] ARM: Tegra: Force PORT_TEGRA as the UART type   Stephen Warren
  • [PATCH] ARM: Tegra: Force PORT_TEGRA as the UART type   Marc Dietrich
  • [PATCH] ARM: Tegra: Force PORT_TEGRA as the UART type   Olof Johansson
• Tegra pinmux Device Tree support   Stephen Warren
  • Tegra pinmux Device Tree support   Grant Likely
    • Tegra pinmux Device Tree support   Olof Johansson
      • Tegra pinmux Device Tree support   David Gibson
      • Tegra pinmux Device Tree support   Shawn Guo
    • Tegra pinmux Device Tree support   Jamie Iles
      • Tegra pinmux Device Tree support   Grant Likely
  • Tegra pinmux Device Tree support   Olof Johansson
    • Tegra pinmux Device Tree support   Stephen Warren
    • Tegra pinmux Device Tree support   Stephen Warren
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Barry Song
  • PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Arnd Bergmann
    • PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Barry Song
      • PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Russell King - ARM Linux
• [PATCH 00/13] Clean up mach/gpio.h headers   Russell King - ARM Linux
  • [PATCH 01/13] ARM: gpio: at91: remove redundant include of mach/gpio.h   Russell King - ARM Linux
  • [PATCH 02/13] ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.h   Russell King - ARM Linux
  • [PATCH 03/13] ARM: gpio: omap: convert drivers to use asm/gpio.h rather than mach/gpio.h   Russell King - ARM Linux
    • [PATCH 03/13] ARM: gpio: omap: convert drivers to use asm/gpio.h rather than mach/gpio.h   Kevin Hilman
  • [PATCH 04/13] ARM: gpio: at91: convert drivers to use asm/gpio.h rather than mach/gpio.h   Russell King - ARM Linux
  • [PATCH 05/13] ARM: gpio: nomadik: convert drivers to use asm/gpio.h rather than mach/gpio.h   Russell King - ARM Linux
  • [PATCH 06/13] ARM: gpio: davinci: convert drivers to use asm/gpio.h rather than mach/gpio.h   Russell King - ARM Linux
    • [PATCH 06/13] ARM: gpio: davinci: convert drivers to use asm/gpio.h rather than mach/gpio.h   Sergei Shtylyov
      • [PATCH 06/13] ARM: gpio: davinci: convert drivers to use asm/gpio.h rather than mach/gpio.h   Russell King - ARM Linux
  • [PATCH 07/13] ARM: gpio: pnx4008: convert drivers to use asm/gpio.h rather than mach/gpio.h   Russell King - ARM Linux
  • [PATCH 08/13] ARM: gpio: ixp2000: convert drivers to use asm/gpio.h rather than mach/gpio.h   Russell King - ARM Linux
  • [PATCH 09/13] ARM: gpio: tegra: convert drivers to use asm/gpio.h rather than mach/gpio.h   Russell King - ARM Linux
  • [PATCH 10/13] ARM: gpio: pxa: convert drivers to use asm/gpio.h rather than mach/gpio.h   Russell King - ARM Linux
  • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   Russell King - ARM Linux
    • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   H Hartley Sweeten
    • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   David Brown
    • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   Linus Walleij
    • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   Kukjin Kim
      • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   Russell King - ARM Linux
      • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   David Brown
    • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   Felipe Balbi
      • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   Russell King - ARM Linux
      • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   Felipe Balbi
    • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   Shawn Guo
    • [PATCH 11/13] ARM: gpio: consolidate trivial gpiolib implementations   Kevin Hilman
  • [PATCH 12/13] ARM: gpio: consolidate gpio_to_irq   Russell King - ARM Linux
    • [PATCH 12/13] ARM: gpio: consolidate gpio_to_irq   Kukjin Kim
  • [PATCH 13/13] ARM: gpio: make trivial GPIOLIB implementation the default   Russell King - ARM Linux
    • [PATCH 13/13] ARM: gpio: make trivial GPIOLIB implementation the default   H Hartley Sweeten
    • [PATCH 13/13] ARM: gpio: make trivial GPIOLIB implementation the default   Kukjin Kim
  • [PATCH 00/13] Clean up mach/gpio.h headers   Jamie Iles
  • [PATCH 00/13] Clean up mach/gpio.h headers   Grant Likely
    • [PATCH 00/13] Clean up mach/gpio.h headers   Russell King - ARM Linux
      • [PATCH 00/13] Clean up mach/gpio.h headers   Grant Likely
• [PATCH] ARM: SAMSUNG: Fix Section Mismatch in PWM backlight support   MyungJoo Ham
  • [PATCH] ARM: SAMSUNG: Fix Section Mismatch in PWM backlight support   Kukjin Kim
• [PATCHv3 0/9] macb: add support for Cadence GEM   Jamie Iles
  • [PATCHv3 1/9] at91: provide macb clks with "pclk" and "hclk" name   Jamie Iles
    • [PATCHv3 1/9] at91: provide macb clks with "pclk" and "hclk" name   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/9 v4] at91: provide macb clks with "pclk" and "hclk" name   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCHv3 2/9] macb: remove conditional clk handling   Jamie Iles
    • [PATCHv3 2/9] macb: remove conditional clk handling   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCHv3 3/9] macb: unify at91 and avr32 platform data   Jamie Iles
    • [PATCHv3 3/9] macb: unify at91 and avr32 platform data   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCHv3 4/9] macb: convert printk to netdev_ and friends   Jamie Iles
    • [PATCHv3 4/9] macb: convert printk to netdev_ and friends   Joe Perches
      • [PATCHv3 4/9] macb: convert printk to netdev_ and friends   Jamie Iles
  • [PATCHv3 5/9] macb: initial support for Cadence GEM   Jamie Iles
    • [PATCHv3 5/9] macb: initial support for Cadence GEM   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCHv3 6/9] macb: support higher rate GEM MDIO clock divisors   Jamie Iles
    • [PATCHv3 6/9] macb: support higher rate GEM MDIO clock divisors   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCHv3 7/9] macb: support statistics for GEM devices   Jamie Iles
    • [PATCHv3 7/9] macb: support statistics for GEM devices   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCHv3 8/9] macb: support DMA bus widths > 32 bits   Jamie Iles
    • [PATCHv3 8/9] macb: support DMA bus widths > 32 bits   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCHv3 9/9] macb: allow GEM to have configurable receive buffer size   Jamie Iles
    • [PATCHv3 9/9] macb: allow GEM to have configurable receive buffer size   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCHv3 0/9] macb: add support for Cadence GEM   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCHv3 0/9] macb: add support for Cadence GEM   Jamie Iles
    • [PATCHv3 0/9] macb: add support for Cadence GEM   Jamie Iles
      • [PATCHv3 0/9] macb: add support for Cadence GEM   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: tegra: fix i2c-tegra compilation when !CONFIG_OF   Marc Zyngier
  • [PATCH] ARM: tegra: fix i2c-tegra compilation when !CONFIG_OF   Grant Likely
• How to handle named resources with DT?   Cousson, Benoit
  • How to handle named resources with DT?   G, Manjunath Kondaiah
    • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Grant Likely
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Matt Porter
      • How to handle named resources with DT?   Scott Wood
      • How to handle named resources with DT?   Grant Likely
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Grant Likely
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Grant Likely
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   David Gibson
      • How to handle named resources with DT?   Paul Walmsley
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Scott Wood
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Grant Likely
      • How to handle named resources with DT?   David Brown
      • How to handle named resources with DT?   Grant Likely
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   David Gibson
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Felipe Balbi
      • How to handle named resources with DT?   Arnd Bergmann
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Grant Likely
      • How to handle named resources with DT?   Kevin Hilman
      • How to handle named resources with DT?   Felipe Balbi
      • How to handle named resources with DT?   Russell King - ARM Linux
      • How to handle named resources with DT?   Arnd Bergmann
      • How to handle named resources with DT?   Kevin Hilman
      • How to handle named resources with DT?   Arnd Bergmann
      • Removing platform_get_resource_byname() (was Re: How to handle named resources with DT?)   Paul Walmsley
      • How to handle named resources with DT?   David Gibson
      • How to handle named resources with DT?   Arnd Bergmann
      • How to handle named resources with DT?   David Gibson
      • How to handle named resources with DT?   Arnd Bergmann
      • How to handle named resources with DT?   Arnd Bergmann
      • How to handle named resources with DT?   David Gibson
      • How to handle named resources with DT?   Arnd Bergmann
      • How to handle named resources with DT?   Paul Walmsley
      • How to handle named resources with DT?   Arnd Bergmann
      • How to handle named resources with DT?   David Gibson
      • How to handle named resources with DT?   Paul Walmsley
      • How to handle named resources with DT?   Russell King - ARM Linux
      • How to handle named resources with DT?   Paul Walmsley
      • How to handle named resources with DT?   Arnd Bergmann
      • How to handle named resources with DT?   Paul Walmsley
      • How to handle named resources with DT?   Mark Brown
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   David Gibson
      • How to handle named resources with DT?   Felipe Balbi
      • How to handle named resources with DT?   David Gibson
      • How to handle named resources with DT?   Paul Walmsley
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Scott Wood
      • How to handle named resources with DT?   Grant Likely
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Grant Likely
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Shawn Guo
      • How to handle named resources with DT?   Cousson, Benoit
      • How to handle named resources with DT?   Shawn Guo
      • How to handle named resources with DT?   Arnd Bergmann
      • How to handle named resources with DT?   David Gibson
      • How to handle named resources with DT?   Paul Walmsley
  • How to handle named resources with DT?   Russell King - ARM Linux
    • How to handle named resources with DT?   Cousson, Benoit
• [PATCH v11 0/4] Consolidating GIC per-cpu interrupts   Marc Zyngier
  • [PATCH v11 1/4] ARM: gic: consolidate PPI handling   Marc Zyngier
  • [PATCH v11 2/4] ARM: gic: Add PPI registration interface   Marc Zyngier
  • [PATCH v11 3/4] ARM: local timers: drop local_timer_ack()   Marc Zyngier
  • [PATCH v11 4/4] ARM: gic: add compute_irqnr macro for exynos4   Marc Zyngier
  • [PATCH v11 0/4] Consolidating GIC per-cpu interrupts   Russell King - ARM Linux
• [PATCH 0/3] Device Tree support for Picochip picoXcell   Jamie Iles
  • [PATCH 1/3] picoxcell: support for Picochip picoxcell devices   Jamie Iles
    • [PATCH 1/3] picoxcell: support for Picochip picoxcell devices   Grant Likely
      • [PATCH 1/3] picoxcell: support for Picochip picoxcell devices   Jamie Iles
      • [PATCH 1/3] picoxcell: support for Picochip picoxcell devices   Grant Likely
  • [PATCH 2/3] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Jamie Iles
  • [PATCH 3/3] picoxcell: add the DTS for the PC7302 board   Jamie Iles
  • [PATCH 0/3] Device Tree support for Picochip picoXcell   Jamie Iles
• [RFC PATCH 00/12] Make SMP timers standalone   Marc Zyngier
  • [RFC PATCH 01/12] ARM: local timers: allow smp_twd to be used standalone   Marc Zyngier
  • [RFC PATCH 02/12] ARM: local timers: switch realview to standalone smp_twd   Marc Zyngier
  • [RFC PATCH 03/12] ARM: local timers: switch vexpress to standalone smp_twd   Marc Zyngier
  • [RFC PATCH 04/12] ARM: local timers: remove localtimer.c from plat-versatile   Marc Zyngier
  • [RFC PATCH 05/12] ARM: local timers: switch tegra to standalone smp_twd   Marc Zyngier
  • [RFC PATCH 06/12] ARM: local timers: switch omap4 to standalone smp_twd   Marc Zyngier
  • [RFC PATCH 07/12] ARM: local timers: switch shmobile to standalone smp_twd   Marc Zyngier
  • [RFC PATCH 08/12] ARM: local timers: switch ux500 to standalone smp_twd   Marc Zyngier
    • [RFC PATCH 08/12] ARM: local timers: switch ux500 to standalone smp_twd   Linus Walleij
  • [RFC PATCH 09/12] ARM: smp_twd: remove support for non-standalone version   Marc Zyngier
  • [RFC PATCH 10/12] ARM: local timers: make MSM timers standalone   Marc Zyngier
  • [RFC PATCH 11/12] ARM: local timers: make MCT timer standalone   Marc Zyngier
  • [RFC PATCH 12/12] ARM: local timers: Remove CONFIG_LOCAL_TIMERS support   Marc Zyngier
• [PATCH 0/6] spi/spi-pl022 fixes   Viresh Kumar
  • [PATCH 1/6] spi/spi-pl022: Resolve formatting issues   Viresh Kumar
  • [PATCH 4/6] spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate   Viresh Kumar
  • [PATCH 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Viresh Kumar
  • [PATCH 0/6] spi/spi-pl022 fixes   Linus Walleij
    • [PATCH 0/6] spi/spi-pl022 fixes   viresh kumar
      • [PATCH 0/6] spi/spi-pl022 fixes   Linus Walleij
      • [PATCH 0/6] spi/spi-pl022 fixes   Arnd Bergmann
• [PATCH 2/6] spi/spi-pl022: Use GFP_NOWAIT for allocation from tasklet   Viresh Kumar
  • [PATCH 2/6] spi/spi-pl022: Use GFP_NOWAIT for allocation from tasklet   Jassi Brar
    • [PATCH 2/6] spi/spi-pl022: Use GFP_NOWAIT for allocation from tasklet   viresh kumar
• [PATCH 3/6] spi/spi-pl022: Don't allocate more sg than required.   Viresh Kumar
• [PATCH 5/6] spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true   Viresh Kumar
• [PATCH] ARM: fix perf build with uclibc toolchains   Florian Fainelli
  • [PATCH] ARM: fix perf build with uclibc toolchains   Will Deacon
    • [PATCH] ARM: fix perf build with uclibc toolchains   Will Deacon
      • [PATCH] ARM: fix perf build with uclibc toolchains   Florian Fainelli
      • [PATCH] ARM: fix perf build with uclibc toolchains   Will Deacon
      • [PATCH] ARM: fix perf build with uclibc toolchains   Florian Fainelli
• [PATCH] ARM: local timers: Add A15 architected timer support   Marc Zyngier
• [RFC][PATCH 1/2] S5PV210: SPI: Add clkdev support   Padmavathi Venna
  • [RFC][PATCH 1/2] S5PV210: SPI: Add clkdev support   Sylwester Nawrocki
    • [RFC][PATCH 1/2] S5PV210: SPI: Add clkdev support   padma venkat
      • [RFC][PATCH 1/2] S5PV210: SPI: Add clkdev support   Sylwester Nawrocki
• [RFC][PATCH 2/2] spi: s3c64xx: Use clkdev for bus clock lookup   Padmavathi Venna
  • [RFC][PATCH 2/2] spi: s3c64xx: Use clkdev for bus clock lookup   Jassi Brar
    • [RFC][PATCH 2/2] spi: s3c64xx: Use clkdev for bus clock lookup   padma venkat
      • [RFC][PATCH 2/2] spi: s3c64xx: Use clkdev for bus clock lookup   Jassi Brar
• [PATCH v3 5/6] OMAP: omap_device: Create a default omap_device_pm_latency   Benoit Cousson
• [PATCH] iomux-mx53: fix PAD_CTRL for I2C1_SDA and I2C1_SCL   Michael Grzeschik
  • [PATCH] iomux-mx53: fix PAD_CTRL for I2C1_SDA and I2C1_SCL   Arnaud Patard (Rtp)
  • [PATCH] iomux-mx53: fix PAD_CTRL for I2C1_SDA and I2C1_SCL   Sascha Hauer
• Building failure of 3.1-rc1 of drivers/usb/host/ehci-mxc.c   Eric Miao
  • Building failure of 3.1-rc1 of drivers/usb/host/ehci-mxc.c   Shawn Guo
    • Building failure of 3.1-rc1 of drivers/usb/host/ehci-mxc.c   Eric Miao
• [PATCH] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
  • [PATCH] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Eric Miao
• [PATCH] pxa/hx4700: Set DS1WM clock_rate   Paul Parsons
  • [PATCH] pxa/hx4700: Set DS1WM clock_rate   Eric Miao
    • [PATCH] pxa/hx4700: Set DS1WM clock_rate   Paul Parsons
• [PATCH v2] pxa/hx4700: Add PCMCIA/CF support   Paul Parsons
• [PATCH 0/3 v2] RFC: marvell dreamplug dft support   Jason Cooper
  • [PATCH 2/3 v2] RFC: arm/kirkwood: add dreamplug support.   Jason Cooper
    • [PATCH 2/3 v2] RFC: arm/kirkwood: add dreamplug support.   Arnaud Patard (Rtp)
      • [PATCH 2/3 v2] RFC: arm/kirkwood: add dreamplug support.   Jason
    • [PATCH 2/3 v2] RFC: arm/kirkwood: add dreamplug support.   Arnd Bergmann
  • [PATCH 3/3 v2] RFC: arm: kirkwood: dreamplug fdt support   Jason Cooper
• [PATCH 1/3 v2] RFC: arm/kirkwood: TEMP hack till mach-types is updated.   Jason Cooper
• [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
  • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Linus Walleij
  • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Rob Herring
    • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Eric Miao
      • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Russell King - ARM Linux
      • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
      • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Russell King - ARM Linux
      • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
    • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Linus Walleij
  • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Jamie Iles
    • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
    • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Russell King - ARM Linux
      • [RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime   Jamie Iles
• [PATCH v2] ep93xx: use DEFINE_RES_* helpers   H Hartley Sweeten
• [PATCH 1/3] gpio/nomadik: remove pull-pinconfig and add SPI2   Linus Walleij
  • [PATCH 1/3] gpio/nomadik: remove pull-pinconfig and add SPI2   Linus Walleij
  • [PATCH 1/3] gpio/nomadik: remove pull-pinconfig and add SPI2   Linus Walleij
• [PATCH 2/3] gpio/nomadik: disable clocks when unused   Linus Walleij
• [PATCH 3/3] gpio/nomadik: use genirq core to track enablement   Linus Walleij
• [PATCH 1/5] mach-u300: retire odd singlemem variant   Linus Walleij
• [PATCH 2/5] mach-u300: drop SEMI config option   Linus Walleij
• [PATCH 3/5] mach-u300: patch physoffset by default   Linus Walleij
  • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Russell King - ARM Linux
    • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Will Deacon
      • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Russell King - ARM Linux
      • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Russell King - ARM Linux
      • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Baruch Siach
      • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Russell King - ARM Linux
      • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Will Deacon
      • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Jean-Christophe PLAGNIOL-VILLARD
      • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Nicolas Pitre
    • Enabling runtime P2V by default (Re: [PATCH 3/5] mach-u300: patch physoffset by default)   Linus Walleij
• [PATCH 4/5] mach-u300: delete bogus memory mappings   Linus Walleij
• [PATCH 5/5] mach-u300: retire AVE device   Linus Walleij
• [RFC PATCH 0/3] Yet another GIC OF binding series   Rob Herring
  • [RFC PATCH 1/3] dt: irq: add interrupt controller descriptor struct   Rob Herring
    • [RFC PATCH 1/3] dt: irq: add interrupt controller descriptor struct   Jamie Iles
      • [RFC PATCH 1/3] dt: irq: add interrupt controller descriptor struct   Rob Herring
  • [RFC PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
    • [RFC PATCH 3/3] ARM: gic: add OF based initialization   Marc Zyngier
      • [RFC PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
  • [PATCH v2] ARM: gic: add OF based initialization   Rob Herring
    • [PATCH v2] ARM: gic: add OF based initialization   Rob Herring
  • [RFC PATCH 0/3] Yet another GIC OF binding series   Shawn Guo
• [RFC PATCH 2/3] ARM: gic: allow irq_start to be 0   Rob Herring
• [PATCH V3] ARM: tegra: paz00: add clocks required for usb operation   Marc Dietrich
  • [PATCH V3] ARM: tegra: paz00: add clocks required for usb operation   Sergei Shtylyov
    • [PATCH V3] ARM: tegra: paz00: add clocks required for usb operation   Marc Dietich
• [PATCH] ep93xx: clock.c: fix all checkpatch.pl issues   H Hartley Sweeten
  • [PATCH] ep93xx: clock.c: fix all checkpatch.pl issues   Ryan Mallon
    • [PATCH] ep93xx: clock.c: fix all checkpatch.pl issues   H Hartley Sweeten
    • [PATCH] ep93xx: clock.c: fix all checkpatch.pl issues   H Hartley Sweeten
• U.S. ARMY USARPAC Medical Team   SGT Tamara W. Rice
• [PATCH 4/5 V2] ARM: tegra: paz00: add clocks required for usboperation   Stephen Warren
  • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks required forusboperation   Marc Dietich
    • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks requiredforusboperation   Marc Dietich
      • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks requiredforusboperation   Olof Johansson
      • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks requiredforusboperation   Marc Dietich
    • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks required forusboperation   Stephen Warren
      • [PATCH 4/5 V2] ARM: tegra: paz00: add clocks requiredforusboperation   Marc Dietrich
• [RFC PATCH 0/8] Introduce logical CPU mapping   Will Deacon
  • [RFC PATCH 2/8] ARM: smp: populate logical CPU mapping during boot   Will Deacon
  • [RFC PATCH 3/8] ARM: gic: convert logical CPU numbers into physical numbers   Will Deacon
    • [RFC PATCH 3/8] ARM: gic: convert logical CPU numbers into physical numbers   Will Deacon
  • [RFC PATCH 4/8] ARM: exynos4: convert logical CPU numbers to physical numbers   Will Deacon
    • [RFC PATCH 4/8] ARM: exynos4: convert logical CPU numbers to physical numbers   Kyungmin Park
      • [RFC PATCH 4/8] ARM: exynos4: convert logical CPU numbers to physical numbers   Will Deacon
      • [RFC PATCH 4/8] ARM: exynos4: convert logical CPU numbers to physical numbers   Kyungmin Park
      • [RFC PATCH 4/8] ARM: exynos4: convert logical CPU numbers to physical numbers   Will Deacon
  • [RFC PATCH 5/8] ARM: msm: convert logical CPU numbers to physical numbers   Will Deacon
    • [RFC PATCH 5/8] ARM: msm: convert logical CPU numbers to physical numbers   David Brown
      • [RFC PATCH 5/8] ARM: msm: convert logical CPU numbers to physical numbers   Will Deacon
      • [RFC PATCH 5/8] ARM: msm: convert logical CPU numbers to physical numbers   David Brown
  • [RFC PATCH 6/8] ARM: shmobile: convert logical CPU numbers to physical numbers   Will Deacon
  • [RFC PATCH 7/8] ARM: ux500: convert logical CPU numbers to physical numbers   Will Deacon
    • [RFC PATCH 7/8] ARM: ux500: convert logical CPU numbers to physical numbers   Linus Walleij
  • [RFC PATCH 8/8] ARM: versatile: convert logical CPU numbers to physical numbers   Will Deacon
  • [RFC PATCH 0/8] Introduce logical CPU mapping   Santosh
    • [RFC PATCH 0/8] Introduce logical CPU mapping   Will Deacon
• [RFC PATCH 1/8] ARM: cpuid: add support for reading MPIDR   Will Deacon
• [PATCH v5] ARM: Use generic BUG() handler   Stephen Boyd
  • [PATCH v5] ARM: Use generic BUG() handler   Simon Glass
    • [PATCH v5] ARM: Use generic BUG() handler   Simon Glass
• [PATCH 4/6] spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate   viresh kumar
• [PATCH] omap: timer: Set dmtimer used as clocksource in autoreload mode   Hemant Pedanekar
  • [PATCH] omap: timer: Set dmtimer used as clocksource in autoreload mode   Tony Lindgren
    • [PATCH] omap: timer: Set dmtimer used as clocksource in autoreload mode   Pedanekar, Hemant
• [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support   Rajendra Nayak
  • [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support   G, Manjunath Kondaiah
    • [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support   Rajendra Nayak
      • [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support   G, Manjunath Kondaiah
• [RFC/PATCH 04/14] OMAP: McBSP: use existing macros for converting between devices   Jarkko Nikula
  • [RFC/PATCH 04/14] OMAP: McBSP: use existing macros for converting between devices   Cousson, Benoit
    • [RFC/PATCH 04/14] OMAP: McBSP: use existing macros for converting between devices   G, Manjunath Kondaiah
• [PATCH] plat-nomadik: small fixup for gpio.h   Linus Walleij
• [PATCH V2 0/6] spi/spi-pl022 fixes   Viresh Kumar
  • [PATCH V2 3/6] spi/spi-pl022: Don't allocate more sg than required.   Viresh Kumar
    • [PATCH V2 3/6] spi/spi-pl022: Don't allocate more sg than required.   Russell King - ARM Linux
      • [PATCH V2 3/6] spi/spi-pl022: Don't allocate more sg than required.   viresh kumar
    • [PATCH V2 3/6] spi/spi-pl022: Don't allocate more sg than required.   Sergei Shtylyov
      • [PATCH V2 3/6] spi/spi-pl022: Don't allocate more sg than required.   viresh kumar
  • [PATCH V2 4/6] spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate   Viresh Kumar
  • [PATCH V2 5/6] spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true   Viresh Kumar
  • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Viresh Kumar
    • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Russell King - ARM Linux
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   viresh kumar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Koul, Vinod
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   viresh kumar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Russell King - ARM Linux
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Koul, Vinod
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Russell King - ARM Linux
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Jassi Brar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Russell King - ARM Linux
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Jassi Brar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Linus Walleij
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Jassi Brar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Vinod Koul
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Jassi Brar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Koul, Vinod
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Jassi Brar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Koul, Vinod
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Linus Walleij
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Jassi Brar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Linus Walleij
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Jassi Brar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Koul, Vinod
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Jassi Brar
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Russell King - ARM Linux
      • [PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.   Jassi Brar
  • [PATCH V3 3/6] spi/spi-pl022: Don't allocate more sg than required.   Viresh Kumar
• [PATCH V2 1/6] spi/spi-pl022: Resolve formatting issues   Viresh Kumar
• [PATCH V2 2/6] spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet   Viresh Kumar
• [PATCH] ARM:EXYNOS4: Add the missing clock of EXYNOS4210 to remove leakage power   Chanwoo Choi
  • [PATCH] ARM:EXYNOS4: Add the missing clock of EXYNOS4210 to remove leakage power   Kukjin Kim
• [RFC PATCH 0/5] Fix Thumb-2 undef handling for mixed-arch kernels   Dave Martin
  • [RFC PATCH 1/5] ARM: Make cpu_alignment into a global variable   Dave Martin
    • [RFC PATCH 1/5] ARM: Make cpu_alignment into a global variable   Tixy
  • [RFC PATCH 2/5] ARM: s3c24xx: Reference cpu_architecture as a global variable   Dave Martin
  • [RFC PATCH 3/5] ARM: kprobes: Reference cpu_architecture as a global variable   Dave Martin
    • [RFC PATCH 3/5] ARM: kprobes: Reference cpu_architecture as a global variable   Tixy
  • [RFC PATCH 4/5] ARM: entry: Remove unnecessary masking when decoding Thumb-2 instructions   Dave Martin
  • [RFC PATCH 5/5] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Dave Martin
    • [RFC PATCH 5/5] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Tixy
      • [RFC PATCH 5/5] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Dave Martin
  • [RFC PATCH 0/5] Fix Thumb-2 undef handling for mixed-arch kernels   Tixy
    • [RFC PATCH 0/5] Fix Thumb-2 undef handling for mixed-arch kernels   Dave Martin
      • [RFC PATCH 0/5] Fix Thumb-2 undef handling for mixed-arch kernels   Nicolas Pitre
      • [RFC PATCH 0/5] Fix Thumb-2 undef handling for mixed-arch kernels   Dave Martin
• [PATCH 0/2] Update uart irq handling for s3c64xx and later SoC's   Thomas Abraham
  • [PATCH 1/2] serial: samsung: Add unified interrupt handler for s3c64xx and later SoC's   Thomas Abraham
    • [PATCH 2/2] ARM: SAMSUNG: Remove uart irq handling from plaform code   Thomas Abraham
    • [PATCH 1/2] serial: samsung: Add unified interrupt handler for s3c64xx and later SoC's   Alan Cox
  • [PATCH 0/2] Update uart irq handling for s3c64xx and later SoC's   Tomasz Figa
• [PATCH] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Eric Miao
  • [PATCH] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
    • [PATCH] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Eric Miao
• [PATCH 1/1] ARM errata: Possible cache data corruption with hit-under-miss enabled   Catalin Marinas
• [PATCH 0/2] Remove hw_addr dma leftovers from S3C24xx machs   Heiko Stübner
  • [PATCH 1/2] Remove hw_addr from s3c24XX dma channel declarations   Heiko Stübner
  • [PATCH 2/2] Remove s3c24xx_dma_addr definition   Heiko Stübner
  • [PATCH 0/2] Remove hw_addr dma leftovers from S3C24xx machs   Kukjin Kim
• [RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt   Cousson, Benoit
  • [RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt   G, Manjunath Kondaiah
    • [RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt   Cousson, Benoit
      • [RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt   G, Manjunath Kondaiah
      • [RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt   Cousson, Benoit
    • [RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt   G, Manjunath Kondaiah
• [RFC/PATCH 10/14] dt: Add pd_size to AUXDATA structure   Cousson, Benoit
  • [RFC/PATCH 10/14] dt: Add pd_size to AUXDATA structure   Grant Likely
    • [RFC/PATCH 10/14] dt: Add pd_size to AUXDATA structure   G, Manjunath Kondaiah
• [PATCH v3 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
  • [PATCH 01/18] led-triggers: use atomic kzalloc during led trigger registering   Bryan Wu
  • [PATCH 02/18] led-triggers: create a trigger for CPU activity   Bryan Wu
    • [PATCH 02/18] led-triggers: create a trigger for CPU activity   Jamie Iles
      • [PATCH 02/18] led-triggers: create a trigger for CPU activity   Jochen Friedrich
  • [PATCH 03/18] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers   Bryan Wu
  • [PATCH 04/18] mach-realview and mach-versatile: retire custom LED code   Bryan Wu
  • [PATCH 05/18] mach-ks8695: remove leds driver, since nobody use it   Bryan Wu
  • [PATCH 06/18] mach-shark: retire custom LED code   Bryan Wu
  • [PATCH 07/18] mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger   Bryan Wu
  • [PATCH 08/18] mach-integrator: move CM_CTRL to header file for accessing by other functions   Bryan Wu
  • [PATCH 09/18] mach-integrator: retire custom LED code   Bryan Wu
  • [PATCH 10/18] mach-clps711x: retire custom LED code of P720T machine   Bryan Wu
  • [PATCH 11/18] mach-ebsa110: retire custom LED code   Bryan Wu
  • [PATCH 12/18] mach-footbridge: retire custom LED code   Bryan Wu
  • [PATCH 13/18] mach-pxa: retire custom LED code   Bryan Wu
  • [PATCH 14/18] plat-samsung: remove including old leds event API header file   Bryan Wu
  • [PATCH 15/18] mach-pnx4008: remove including old leds event API header file   Bryan Wu
  • [PATCH 16/18] mach-omap1: retire custom LED code   Bryan Wu
  • [PATCH 17/18] mach-sa1100: retire custom LED code   Bryan Wu
    • [PATCH 17/18] mach-sa1100: retire custom LED code   Jochen Friedrich
      • [PATCH 17/18] mach-sa1100: retire custom LED code   Bryan Wu
  • [PATCH 18/18] ARM: use new LEDS CPU trigger stub to replace old one   Bryan Wu
• [PATCH 00/19] GPIO exodus and cleanup   Linus Walleij
  • [PATCH 00/19] GPIO exodus and cleanup   Russell King - ARM Linux
    • [PATCH 00/19] GPIO exodus and cleanup   Linus Walleij
      • [PATCH 00/19] GPIO exodus and cleanup   Linus Walleij
      • [PATCH 00/19] GPIO exodus and cleanup   Grant Likely
      • [PATCH 00/19] GPIO exodus and cleanup   Linus Walleij
      • [PATCH 00/19] GPIO exodus and cleanup   Russell King - ARM Linux
      • [PATCH 00/19] GPIO exodus and cleanup   Russell King - ARM Linux
      • [PATCH 00/19] GPIO exodus and cleanup   Linus Walleij
      • [PATCH 00/19] GPIO exodus and cleanup   Linus Walleij
• [PATCH 01/19] plat-nomadik: break out GPIO driver specifics   Linus Walleij
• [PATCH 02/19] mach-u300: break out GPIO driver specifics   Linus Walleij
• [PATCH 03/19] mach-u300: delete irq_to_gpio() function   Linus Walleij
• [PATCH 04/19] mach-ks8695: move GPIO driver to GPIO subsystem   Linus Walleij
• [PATCH 05/19] mach-ks8695: break out GPIO driver specifics   Linus Walleij
• [PATCH 06/19] mach-ks8695: fix GPIO LEDs   Linus Walleij
• [PATCH 07/19] mach-davinci: move GPIO driver to GPIO subsystem   Linus Walleij
• [PATCH 08/19] mach-davinci: move DaVinci TNET GPIO driver to GPIO subsystem   Linus Walleij
  • [PATCH 08/19] mach-davinci: move DaVinci TNET GPIO driver to GPIO subsystem   Nori, Sekhar
    • [PATCH 08/19] mach-davinci: move DaVinci TNET GPIO driver to GPIO subsystem   Linus Walleij
      • [PATCH 08/19] mach-davinci: move DaVinci TNET GPIO driver to GPIO subsystem   Nori, Sekhar
• [PATCH 09/19] mach-davinci: break out GPIO driver specifics   Linus Walleij
• [PATCH 10/19] mach-ep93xx: break out GPIO driver specifics   Linus Walleij
  • [PATCH 10/19] mach-ep93xx: break out GPIO driver specifics   H Hartley Sweeten
    • [PATCH 10/19] mach-ep93xx: break out GPIO driver specifics   Linus Walleij
      • [PATCH 10/19] mach-ep93xx: break out GPIO driver specifics   H Hartley Sweeten
      • [PATCH 10/19] mach-ep93xx: break out GPIO driver specifics   H Hartley Sweeten
      • [PATCH 10/19] mach-ep93xx: break out GPIO driver specifics   Linus Walleij
• [PATCH 11/19] mach-ixp2000: rename GPIO header   Linus Walleij
• [PATCH 12/19] mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem   Linus Walleij
• [PATCH 13/19] mach-lpc32xx: break out GPIO driver specifics   Linus Walleij
• [PATCH 14/19] plat-pxa: move PXA GPIO driver to GPIO subsystem   Linus Walleij
  • [PATCH 14/19] plat-pxa: move PXA GPIO driver to GPIO subsystem   Eric Miao
• [PATCH 15/19] plat-pxa: break out GPIO driver specifics   Linus Walleij
  • [PATCH 15/19] plat-pxa: break out GPIO driver specifics   Eric Miao
• [PATCH 16/19] mach-pnx4008: move PNX4008 GPIO driver to GPIO subsystem   Linus Walleij
• [PATCH 17/19] mach-pnx4008: rename GPIO header   Linus Walleij
• [PATCH 18/19] mach-sa1100: move SA1100 GPIO driver to GPIO subsystem   Linus Walleij
• [PATCH 19/19] mach-sa1100: delete irq_to_gpio() function   Linus Walleij
• [RFC/PATCH 11/14] dt: omap3: add soc file for handling i2c controllers   Cousson, Benoit
  • [RFC/PATCH 11/14] dt: omap3: add soc file for handling i2c controllers   G, Manjunath Kondaiah
    • [RFC/PATCH 11/14] dt: omap3: add soc file for handling i2c controllers   Cousson, Benoit
      • [RFC/PATCH 11/14] dt: omap3: add soc file for handling i2c controllers   G, Manjunath Kondaiah
• [RFC/PATCH 12/14] dt: omap3: beagle board: set clock freq for i2c devices   Cousson, Benoit
  • [RFC/PATCH 12/14] dt: omap3: beagle board: set clock freq for i2c devices   G, Manjunath Kondaiah
• [PATCH] detect conflicting zreladdrs   Sascha Hauer
  • [PATCH 3/3] ARM: allow to detect conflicting zreladdrs   Sascha Hauer
  • [PATCH] detect conflicting zreladdrs   Sascha Hauer
    • [PATCH] detect conflicting zreladdrs   Russell King - ARM Linux
• [PATCH 1/3] ARM: Check for multiple zreladdrs   Sascha Hauer
• [PATCH 2/3] ARM: Check for multiple load addresses before building a uImage   Sascha Hauer
• [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Felipe Balbi
  • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   J, KEERTHY
    • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Felipe Balbi
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   J, KEERTHY
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Felipe Balbi
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Rajendra Nayak
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   J, KEERTHY
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Felipe Balbi
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Felipe Balbi
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Roger Quadros
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   J, KEERTHY
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Rajendra Nayak
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Felipe Balbi
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Kevin Hilman
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Rajendra Nayak
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   J, KEERTHY
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Kevin Hilman
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Rajendra Nayak
      • [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver   Guenter Roeck
• Subject: L2x0 OF properties do not include interrupt #   Mark Rutland
  • Subject: L2x0 OF properties do not include interrupt #   Rob Herring
    • Subject: L2x0 OF properties do not include interrupt #   Will Deacon
      • Subject: L2x0 OF properties do not include interrupt #   Arnd Bergmann
      • Subject: L2x0 OF properties do not include interrupt #   Will Deacon
      • Subject: L2x0 OF properties do not include interrupt #   Arnd Bergmann
      • Subject: L2x0 OF properties do not include interrupt #   Will Deacon
      • Subject: L2x0 OF properties do not include interrupt #   Rob Herring
      • Subject: L2x0 OF properties do not include interrupt #   Will Deacon
      • Subject: L2x0 OF properties do not include interrupt #   Rob Herring
      • Subject: L2x0 OF properties do not include interrupt #   Will Deacon
      • Subject: L2x0 OF properties do not include interrupt #   Russell King - ARM Linux
      • Subject: L2x0 OF properties do not include interrupt #   Rob Herring
      • Subject: L2x0 OF properties do not include interrupt #   Will Deacon
  • Subject: L2x0 OF properties do not include interrupt #   Arnd Bergmann
    • Subject: L2x0 OF properties do not include interrupt #   Rob Herring
      • Subject: L2x0 OF properties do not include interrupt #   Will Deacon
• [RFC/PATCH 14/14] dt: omap3: enable dt support for i2c1 controller   Cousson, Benoit
  • [RFC/PATCH 14/14] dt: omap3: enable dt support for i2c1 controller   G, Manjunath Kondaiah
• [PATCH 1/2] ARM: perf: fix prototype of release_pmu   Mark Rutland
  • [PATCH 2/2] ARM: perf: make name of arm_pmu_type consistent   Mark Rutland
    • [PATCH 2/2] ARM: perf: make name of arm_pmu_type consistent   Will Deacon
    • [PATCH 2/2] ARM: perf: make name of arm_pmu_type consistent   Russell King - ARM Linux
      • [PATCH 2/2] ARM: perf: make name of arm_pmu_type consistent   Will Deacon
• [PATCH 1/4] Framework for exporting System-on-Chip information via sysfs   Lee Jones
  • [PATCH 2/4] Add documenation for new sysfs devices/soc functionallity   Lee Jones
    • [PATCH 2/4] Add documenation for new sysfs devices/soc functionallity   Greg KH
  • [PATCH 3/4] mach-ux500: export System-on-Chip information ux500 via sysfs   Lee Jones
    • [PATCH 3/4] mach-ux500: export System-on-Chip information ux500 via sysfs   Jamie Iles
    • [PATCH 3/4] mach-ux500: export System-on-Chip information ux500 via sysfs   Greg KH
    • [PATCH 3/4] mach-ux500: export System-on-Chip information ux500 via sysfs   Arnd Bergmann
      • [PATCH 3/4] mach-ux500: export System-on-Chip information ux500 via sysfs   Lee Jones
      • [PATCH 3/4] mach-ux500: export System-on-Chip information ux500 via sysfs   Arnd Bergmann
      • [PATCH 3/4] mach-ux500: export System-on-Chip information ux500 via sysfs   Lee Jones
  • [PATCH 4/4] Move top level platform devices in sysfs to /sys/devices/soc/X   Lee Jones
    • [PATCH 4/4] Move top level platform devices in sysfs to /sys/devices/soc/X   Greg KH
      • [PATCH 4/4] Move top level platform devices in sysfs to /sys/devices/soc/X   Linus Walleij
      • [PATCH 4/4] Move top level platform devices in sysfs to /sys/devices/soc/X   Greg KH
      • [PATCH 4/4] Move top level platform devices in sysfs to /sys/devices/soc/X   Linus Walleij
      • [PATCH 4/4] Move top level platform devices in sysfs to /sys/devices/soc/X   Arnd Bergmann
    • [PATCH 4/4] Move top level platform devices in sysfs to /sys/devices/soc/X   Arnd Bergmann
  • [PATCH 1/4] Framework for exporting System-on-Chip information via sysfs   Jamie Iles
    • [PATCH 1/4] Framework for exporting System-on-Chip information via sysfs   Lee Jones
      • [PATCH 1/4] Framework for exporting System-on-Chip information via sysfs   Jamie Iles
      • [PATCH 1/4] Framework for exporting System-on-Chip information via sysfs   Jamie Iles
  • [PATCH 1/4] Framework for exporting System-on-Chip information via sysfs   Greg KH
• [PATCH v2] omap: timer: Set dmtimer used as clocksource in autoreload mode   Hemant Pedanekar
  • [PATCH v2] omap: timer: Set dmtimer used as clocksource in autoreload mode   Tony Lindgren
• [PATCH v7 00/16] ARM: Add support for the Large Physical Address Extensions   Catalin Marinas
  • [PATCH v7 04/16] ARM: LPAE: Factor out 2-level page table definitions into separate files   Catalin Marinas
  • [PATCH v7 05/16] ARM: LPAE: Add (pte|pmd)val_t type definitions as u32   Catalin Marinas
  • [PATCH v7 06/16] ARM: LPAE: Use a mask for physical addresses in page table entries   Catalin Marinas
  • [PATCH v7 07/16] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
  • [PATCH v7 08/16] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
  • [PATCH v7 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
    • [PATCH v7 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Vasily Khoruzhick
    • [PATCH v7 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Vasily Khoruzhick
      • [PATCH] Fix non-LPAE boot regression.   Vasily Khoruzhick
      • [PATCH] Fix non-LPAE boot regression.   Catalin Marinas
      • [PATCH] Fix non-LPAE boot regression.   Russell King - ARM Linux
      • [PATCH] Fix non-LPAE boot regression.   Catalin Marinas
      • [PATCH] Fix non-LPAE boot regression.   Catalin Marinas
      • [PATCH] Fix non-LPAE boot regression.   Catalin Marinas
      • [PATCH] Fix non-LPAE boot regression.   Vasily Khoruzhick
      • [PATCH] Fix non-LPAE boot regression.   Vasily Khoruzhick
    • [PATCH v7 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
    • [PATCH v7 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Ian Campbell
      • [PATCH v7 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
      • [PATCH v7 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Ian Campbell
  • [PATCH v7 10/16] ARM: LPAE: Invalidate the TLB before freeing the PMD   Catalin Marinas
  • [PATCH v7 11/16] ARM: LPAE: Add fault handling support   Catalin Marinas
  • [PATCH v7 12/16] ARM: LPAE: Add context switching support   Catalin Marinas
  • [PATCH v7 13/16] ARM: LPAE: Add identity mapping support for the 3-level page table format   Catalin Marinas
  • [PATCH v7 14/16] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem   Catalin Marinas
  • [PATCH v7 15/16] ARM: LPAE: add support for ATAG_MEM64   Catalin Marinas
  • [PATCH v7 16/16] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [PATCH v7 01/16] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v7 02/16] ARM: LPAE: Cast the dma_addr_t argument to unsigned long in dma_to_virt   Catalin Marinas
  • [PATCH v7 02/16] ARM: LPAE: Cast the dma_addr_t argument to unsigned long in dma_to_virt   Russell King - ARM Linux
    • [PATCH v7 02/16] ARM: LPAE: Cast the dma_addr_t argument to unsigned long in dma_to_virt   Russell King - ARM Linux
• [PATCH v7 03/16] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Catalin Marinas
  • [PATCH v7 03/16] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Russell King - ARM Linux
  • [PATCH v7 03/16] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Catalin Marinas
  • [PATCH v7 03/16] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Russell King - ARM Linux
    • [PATCH v7 03/16] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Catalin Marinas
• PB1176 broken in -rc1   Will Deacon
  • PB1176 broken in -rc1   Jamie Iles
    • PB1176 broken in -rc1   Will Deacon
      • PB1176 broken in -rc1   Linus Walleij
  • PB1176 broken in -rc1   Linus Walleij
    • PB1176 broken in -rc1   Will Deacon
  • PB1176 broken in -rc1   Linus Walleij
    • PB1176 broken in -rc1   Will Deacon
      • PB1176 broken in -rc1   Linus Walleij
      • PB1176 broken in -rc1   Will Deacon
      • PB1176 broken in -rc1   Russell King - ARM Linux
      • PB1176 broken in -rc1   Will Deacon
      • PB1176 broken in -rc1   Russell King - ARM Linux
      • PB1176 broken in -rc1   Will Deacon
      • PB1176 broken in -rc1   Linus Walleij
      • PB1176 broken in -rc1   Russell King - ARM Linux
    • PB1176 broken in -rc1   Jamie Iles
      • PB1176 broken in -rc1   Jamie Iles
• [PATCH V4] ARM: tegra: paz00: add clocks required for usb operation   Marc Dietrich
  • [PATCH V4] ARM: tegra: paz00: add clocks required for usb operation   Stephen Warren
    • [PATCH V4] ARM: tegra: paz00: add clocks required for usb operation   Olof Johansson
• [PATCH v4] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   H Hartley Sweeten
• [RFC][PATCH V2 1/2] S5PV210: SPI: Add clkdev support   Padmavathi Venna
• [RFC][PATCH V2 2/2] spi: s3c64xx: Use clkdev for bus clock lookup   Padmavathi Venna
• [PATCH 1/2] gpio: Add CNS3XXX mmio gpio support   Tommy Lin
  • [PATCH 1/2] gpio: Add CNS3XXX mmio gpio support   Russell King - ARM Linux
    • [PATCH 1/2] gpio: Add CNS3XXX mmio gpio support   林宏文
• [PATCH 2/2] mach-cns3xxx: Add demo code for external interrupt pins   Tommy Lin
• [PATCH 1/2] gpio: Add CNS3xxx mmio gpio support   Tommy Lin
• [PATCH v2 1/3] ARM: i.MX51: Remove _MX51 references   Troy Kisky
  • [PATCH v2 2/3] ARM: i.MX51: clean up iomux-mx51.h   Troy Kisky
    • [PATCH v2 2/3] ARM: i.MX51: clean up iomux-mx51.h   Fabio Estevam
      • [PATCH v2 2/3] ARM: i.MX51: clean up iomux-mx51.h   Troy Kisky
      • [PATCH v2 2/3] ARM: i.MX51: clean up iomux-mx51.h   Sascha Hauer
  • [PATCH v2 3/3] ARM: i.MX53: clean up iomux-mx53.h   Troy Kisky
  • [PATCH v2 1/3] ARM: i.MX51: Remove _MX51 references   Sascha Hauer
• [PATCH V3 0/2] ARM: mmp: add audio sram support   Leo Yan
  • [PATCH 1/2] ARM: mmp: add sram allocator   Leo Yan
  • [PATCH 2/2] ARM: mmp: register audio sram bank   Leo Yan
• [GIT PULL] pxa: fixes for v3.1-rc1   Eric Miao
  • [GIT PULL] pxa: fixes for v3.1-rc1   Arnd Bergmann
• [PATCH] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen   Inderpal Singh
  • [PATCH] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen   Mark Brown
  • [PATCH v2] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen   Inderpal Singh
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Chanwoo Choi
  • [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Rafael J. Wysocki
    • [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Russell King - ARM Linux
      • [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Rafael J. Wysocki
  • [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Kukjin Kim
• [PATCH 1/4] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210   Chanwoo Choi
• [PATCH 2/4] ARM: EXYNOS4: Support for generic Clock manipulation PM callbacks   Chanwoo Choi
• [PATCH 3/4] ARM: EXYNOS4: Delete the power-domain code depend on Samsung SoC   Chanwoo Choi
• [PATCH 4/4] ARM: EXYNOS4: Add power domain to use generic Power domain Framework   Chanwoo Choi
• [GIT PULL] samsung: fixes for v3.1-rc1   Kyungmin Park
  • [GIT PULL] samsung: fixes for v3.1-rc1   Kukjin Kim
    • [GIT PULL] samsung: fixes for v3.1-rc1   Arnd Bergmann
      • [GIT PULL] samsung: fixes for v3.1-rc1   Kukjin Kim
      • [GIT PULL] samsung: fixes for v3.1-rc1   Kyungmin Park
      • [GIT PULL] samsung: fixes for v3.1-rc1   Kukjin Kim
• [PATCH] omap2+: cleanup unneeded *_init_irq functions   Michael Jones
• [RFC PATCH] ARM: gic: add OF based initialization   Marc Zyngier
  • [RFC PATCH] ARM: gic: add OF based initialization   Rob Herring
• [PATCHv4 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT   Russell King - ARM Linux
• [RFC: PATCH 0/4] Introducing TI's New SoC/board AM335XEVM   hvaibhav at ti.com
  • [RFC: PATCH 0/4] Introducing TI's New SoC/board AM335XEVM   Hiremath, Vaibhav
• [RFC: PATCH 1/4] AM335X: Update common omap platform files   hvaibhav at ti.com
  • [RFC: PATCH 1/4] AM335X: Update common omap platform files   Hiremath, Vaibhav
• [RFC: PATCH 2/4] AM335X: Update common OMAP machine specific sources   hvaibhav at ti.com
• [RFC: PATCH 3/4] AM335X: Create board support and enable build for AM335XEVM   hvaibhav at ti.com
• [RFC: PATCH 4/4] AM335X: Add low level debugging support   hvaibhav at ti.com
  • [RFC: PATCH 4/4] AM335X: Add low level debugging support   Hiremath, Vaibhav
• [PATCH] Add interrupts property to L2x0 OF binding   Mark Rutland
• [PATCH] OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup   Santosh
  • [PATCH] OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup   Paul Walmsley
    • [PATCH] OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup   Paul Walmsley
      • [PATCH] OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup   Santosh
• Memory hotplug on ARM linux   Emeric Vigier
• [PATCH v2 0/8] Add pdc feature to atmel-mci   ludovic.desroches at atmel.com
  • [PATCH v2 1/8] mmc: atmel-mci: change namespace   ludovic.desroches at atmel.com
  • [PATCH v2 2/8] mmc: atmel-mci: change atmci_readl and atmci_writel macros   ludovic.desroches at atmel.com
  • [PATCH v2 3/8] mmc: atmel-mci: indentation   ludovic.desroches at atmel.com
  • [PATCH v2 4/8] mmc: atmel-mci: add pdc support and runtime capabilities detection   ludovic.desroches at atmel.com
• [PATCH v2 5/8] mmc: atmel-mci: change atmci_start_command to atmci_send_command   ludovic.desroches at atmel.com
• [PATCH v2 6/8] mmc: atmel-mci: use ATMEL_PDC_SCND_BUF_OFF instead of a literal value   ludovic.desroches at atmel.com
• [PATCH v2 7/8] mmc: atmel-mci: correct sg buffer size evaluation   ludovic.desroches at atmel.com
• [PATCH v2 8/8] mmc: atmel-mci: fix a potential issue about pending PDC interrupts   ludovic.desroches at atmel.com
• [PATCH] ARM: SAMSUNG: Consolidate common function to set SDHCI plat data   Banajit Goswami
  • [PATCH] ARM: SAMSUNG: Consolidate common function to set SDHCI plat data   Kukjin Kim
• [PATCH v2] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
  • [PATCH v2] ARM: sched_clock: allow sched_clock to be selected at runtime   Tony Lindgren
  • [PATCH v2] ARM: sched_clock: allow sched_clock to be selected at runtime   Jamie Iles
    • [PATCH v2] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
  • [PATCH v2] ARM: sched_clock: allow sched_clock to be selected at runtime   Nicolas Pitre
    • [PATCH v2] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
    • [PATCH v2] ARM: sched_clock: allow sched_clock to be selected at runtime   Russell King - ARM Linux
• [PATCH v2 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
  • [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Marek Vasut
    • [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
      • [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Marek Vasut
      • [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH] ARM: tegra: Fix <mach/gpio.h> to have necessary #includes   Stephen Warren
  • [PATCH] ARM: tegra: Fix <mach/gpio.h> to have necessary #includes   Russell King - ARM Linux
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Gupta, Ramesh
  • [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Russell King - ARM Linux
    • [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   Gupta, Ramesh
• [PATCH] ARM: tegra: Fix <mach/gpio.h> to have necessary #includes   Russell King - ARM Linux
• [PATCH] i2c: tegra: fix possible race condition after tx   Doug Anderson
  • [PATCH] i2c: tegra: fix possible race condition after tx   Vincent Palatin
  • [PATCH] i2c: tegra: fix possible race condition after tx   Rhyland Klein
  • [PATCH] i2c: tegra: fix possible race condition after tx   Stephen Warren
    • [PATCH] i2c: tegra: fix possible race condition after tx   Doug Anderson
  • [PATCH] i2c: tegra: fix possible race condition after tx   Ben Dooks
• [PATCH] mmc: Use pr_<level>, add and use mmc_<level>   David Brown
• [PATCH v2 1/4] gpio/tegra: Remove use of irq_to_gpio   Stephen Warren
  • [PATCH v2 3/4] arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio   Stephen Warren
  • [PATCH v2 4/4] arm/tegra: mach/gpio.h: include linux/types.h to fix build   Stephen Warren
  • [PATCH v2 1/4] gpio/tegra: Remove use of irq_to_gpio   Colin Cross
    • [PATCH v2 1/4] gpio/tegra: Remove use of irq_to_gpio   Stephen Warren
      • [PATCH v2 1/4] gpio/tegra: Remove use of irq_to_gpio   Stephen Warren
• [PATCH v2 2/4] gpio/tegra: Implement gpio_chip.to_irq   Stephen Warren
• [PATCHv4 1/2] ARM: Set proper TEXT_OFFSET for newer MSMs   David Brown
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Turquette, Mike
• [PATCH 0/2] Add NAND support for i.MX53EVK board   Jason Liu
  • [PATCH 1/2] ARM: i.MX53: Add NAND device support   Jason Liu
  • [PATCH 2/2] ARM: i.MX53EVK: Add NAND support for i.MX53evk board   Jason Liu
  • [PATCH 0/2] Add NAND support for i.MX53EVK board   Shawn Guo
    • [PATCH 0/2] Add NAND support for i.MX53EVK board   Jason Liu
• [PATCH] mtd: mxc_nand: Add mx53 NFC driver support   Jason Liu
• [PATCH v2] OMAP3: powerdomains: Match silicon revision to select the correct "core_pwrdm" definition   Koyamangalath, Abhilash
• [PATCH 0/6] Clean up plat-mxc/include/mach/gpio.h   Shawn Guo
  • [PATCH 1/6] arm/cpuimx51: gpio_to_irq() should be used to get irq from gpio number   Shawn Guo
    • [PATCH 1/6] arm/cpuimx51: gpio_to_irq() should be used to get irq from gpio number   Jason Liu
      • [PATCH 1/6] arm/cpuimx51: gpio_to_irq() should be used to get irq from gpio number   Shawn Guo
      • [PATCH 1/6] arm/cpuimx51: gpio_to_irq() should be used to get irq from gpio number   Russell King - ARM Linux
      • [PATCH 1/6] arm/cpuimx51: gpio_to_irq() should be used to get irq from gpio number   Shawn Guo
  • [PATCH 2/6] arm/imx: remove the uses of gpio_to_irq()   Shawn Guo
    • [PATCH 2/6] arm/imx: remove the uses of gpio_to_irq()   Russell King - ARM Linux
      • [PATCH 2/6] arm/imx: remove the uses of gpio_to_irq()   Shawn Guo
      • [PATCH 2/6] arm/imx: remove the uses of gpio_to_irq()   Shawn Guo
      • [PATCH 2/6] arm/imx: remove the uses of gpio_to_irq()   Russell King - ARM Linux
      • [PATCH 2/6] arm/imx: remove the uses of gpio_to_irq()   Shawn Guo
  • [PATCH 3/6] gpio/mxc: add .to_irq for gpio chip   Shawn Guo
  • [PATCH 4/6] arm/imx: remove gpio_to_irq() from mach/gpio.h   Shawn Guo
  • [PATCH 5/6] gpio/mxc: move irq_to_gpio() into gpio-mxc driver   Shawn Guo
  • [PATCH 6/6] arm/mxc: move IMX_GPIO_NR into mach/hardware.h   Shawn Guo
    • [PATCH 6/6] arm/mxc: move IMX_GPIO_NR into mach/hardware.h   Russell King - ARM Linux
      • [PATCH 6/6] arm/mxc: move IMX_GPIO_NR into mach/hardware.h   Shawn Guo
• [GIT PULL] omap fixes for v3.1-rc1   Tony Lindgren
• [PATCH] [ARM] Orion: gpio: add missing include of linux/types.h   Axel Lin
  • [PATCH] [ARM] Orion: gpio: add missing include of linux/types.h   Peter Hüwe
• [PATCH] ARM: EXYNOS4: Update config file of NURI to enable RTC   Kukjin Kim
• [PATCH] ARM: S3C64XX: Hook up GPIO initiated DVS on Cragganmore   Kukjin Kim
• [PATCH kernel-3.0] arm:cache-l2x0: Fix L2 Cache size calculation.   Srinivas Kandagatla
• [PATCH] ARM: EXYNOS4: Change the pwm device name to supprot clkdev   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Fix wrong devname to support clkdev   Kukjin Kim
• [PATCH] arm: exynos4: Fix write to nonexistent TCMPB4 PWM register on samsung exynos4 platform   Kukjin Kim
• [PATCH kernel-3.0] arm:cache-l2x0: Fix L2 Cache size calculation.   Srinivas KANDAGATLA
  • [PATCH kernel-3.0] arm:cache-l2x0: Fix L2 Cache size calculation.   Will Deacon
    • [PATCH kernel-3.0] arm:cache-l2x0: Fix L2 Cache size calculation.   Russell King - ARM Linux
      • [PATCH kernel-3.0] arm:cache-l2x0: Fix L2 Cache size calculation.   Will Deacon
      • [PATCH kernel-3.0] arm:cache-l2x0: Fix L2 Cache size calculation.   Srinivas KANDAGATLA
      • [PATCH kernel-3.0] arm:cache-l2x0: Fix L2 Cache size calculation.   Will Deacon
      • [PATCH kernel-3.0] arm:cache-l2x0: Fix L2 Cache size calculation.   Russell King - ARM Linux
• [PATCH] ARM: exynos4: Add TWD base address   Kukjin Kim
• [PATCH] ARM: EXYNOS4: remove duplicated #include   Kukjin Kim
• [PATCH] ARM: S3C64XX: Fix build break in PM debug   Abhilash Kesavan
  • [PATCH] ARM: S3C64XX: Fix build break in PM debug   Kukjin Kim
• [PATCH 0/2] Fixes for S5PV210 PM   Abhilash Kesavan
  • [PATCH 1/2] ARM: S5PV210: Fix build warning   Abhilash Kesavan
  • [PATCH 2/2] ARM: S5PV210: Remove unnecessary symbol for PM   Abhilash Kesavan
  • [PATCH 0/2] Fixes for S5PV210 PM   Kukjin Kim
• [PATCH 0/5] S5P64X0 PM Support   Abhilash Kesavan
  • [PATCH 1/5] ARM: S5P: Make the common S5P PM code conditionally compile   Abhilash Kesavan
  • [PATCH 2/5] ARM: SAMSUNG: Make the sleep code common for S3C64XX and newer SoCs   Abhilash Kesavan
    • [PATCH 2/5] ARM: SAMSUNG: Make the sleep code common for S3C64XX and newer SoCs   Kukjin Kim
      • [PATCH 2/5] ARM: SAMSUNG: Make the sleep code common for S3C64XX and newer SoCs   Abhilash Kesavan
  • [PATCH 3/5] ARM: S5P64X0: Add pm save/restore functions for GPIO banks   Abhilash Kesavan
  • [PATCH 4/5] ARM: S5P64X0: Fix incorrect serial clock name   Abhilash Kesavan
  • [PATCH 5/5] ARM: S5P64X0: Add Power Management support   Abhilash Kesavan
  • [PATCH 0/5] S5P64X0 PM Support   Kukjin Kim
• [PATCHv14 0/9] Contiguous Memory Allocator   Marek Szyprowski
  • [PATCH 4/9] mm: MIGRATE_CMA migration type added   Marek Szyprowski
  • [PATCH 6/9] drivers: add Contiguous Memory Allocator   Marek Szyprowski
  • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Marek Szyprowski
    • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Arnd Bergmann
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Russell King - ARM Linux
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Arnd Bergmann
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Russell King - ARM Linux
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Arnd Bergmann
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Marek Szyprowski
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Arnd Bergmann
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Marek Szyprowski
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Tixy
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Marek Szyprowski
      • [PATCH 7/9] ARM: DMA: steal memory for DMA coherent mappings   Marek Szyprowski
  • [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
    • [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem   Arnd Bergmann
      • [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
      • [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem   Arnd Bergmann
• [PATCH 1/9] mm: move some functions from memory_hotplug.c to page_isolation.c   Marek Szyprowski
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Marek Szyprowski
• [PATCH 3/9] mm: alloc_contig_range() added   Marek Szyprowski
• [PATCH 5/9] mm: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCH 9/9] ARM: S5PV210: example of CMA private area for FIMC device on Goni board   Marek Szyprowski
• [PATCH kernel-3.0] arm:cache-l2x0: Fix L2 Cache size calculation.   Srinivas KANDAGATLA
• [PATCH 0/5] Miscellaneous s3c64xx fixes.   Tomasz Figa
  • [PATCH 0/5] Miscellaneous s3c64xx fixes.   Kukjin Kim
    • [PATCH 0/5] Miscellaneous s3c64xx fixes.   Tomasz Figa
      • [PATCH 0/5] Miscellaneous s3c64xx fixes.   Kukjin Kim
      • [PATCH 0/5] Miscellaneous s3c64xx fixes.   Tomasz Figa
• [PATCH] s3c-adc-battery: fix compilation error due to missing header   Vasily Khoruzhick
• [GIT PULL] Fixes for 3.1   Will Deacon
• Relinking zImage when nothing changes   Stephen Boyd
  • Relinking zImage when nothing changes   Sam Ravnborg
    • Relinking zImage when nothing changes   Stephen Boyd
      • Relinking zImage when nothing changes   Sam Ravnborg
      • Relinking zImage when nothing changes   Stephen Boyd
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Stephen Boyd
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Arnaud Lacombe
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Russell King - ARM Linux
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Arnaud Lacombe
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Sam Ravnborg
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Arnaud Lacombe
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Sam Ravnborg
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Arnaud Lacombe
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Arnaud Lacombe
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Nicolas Pitre
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Arnaud Lacombe
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Russell King - ARM Linux
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Troy Kisky
      • [PATCH] ARM: zImage: Skip relinking if nothing changes   Arnaud Lacombe
    • Relinking zImage when nothing changes   Arnaud Lacombe
      • Relinking zImage when nothing changes   Sam Ravnborg
      • Relinking zImage when nothing changes   Arnaud Lacombe
• [GIT PULL] arm-soc fixes for 3.1-rc1   Arnd Bergmann
• [RFC PATCH 00/12] arm/tegra: Initialize GPIO & pinmux from DT   Stephen Warren
  • [RFC PATCH 01/12] dt: Add of_find_child_node_by_name()   Stephen Warren
  • [RFC PATCH 02/12] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs   Stephen Warren
  • [RFC PATCH 03/12] arm/tegra: Avoid duplicate gpio/pinmux devices with dt   Stephen Warren
  • [RFC PATCH 04/12] arm/tegra: board-dt: Add AUXDATA for tegra-gpio and tegra-pinmux   Stephen Warren
  • [RFC PATCH 05/12] arm/dt: Tegra: Add nvidia, gpios property to GPIO controller   Stephen Warren
    • [RFC PATCH 05/12] arm/dt: Tegra: Add nvidia,gpios property to GPIO controller   Olof Johansson
      • [RFC PATCH 05/12] arm/dt: Tegra: Add nvidia,gpios property to GPIO controller   Stephen Warren
  • [RFC PATCH 06/12] arm/dt: Tegra: Add pinmux node   Stephen Warren
    • [RFC PATCH 06/12] arm/dt: Tegra: Add pinmux node   Olof Johansson
      • [RFC PATCH 06/12] arm/dt: Tegra: Add pinmux node   Stephen Warren
  • [RFC PATCH 07/12] gpio/tegra: Convert to a platform device   Stephen Warren
  • [RFC PATCH 08/12] gpio/tegra: Add device tree support   Stephen Warren
    • [RFC PATCH 08/12] gpio/tegra: Add device tree support   Belisko Marek
      • [RFC PATCH 08/12] gpio/tegra: Add device tree support   Stephen Warren
  • [RFC PATCH 09/12] arm/tegra: Convert pinmux driver to a platform device   Stephen Warren
  • [RFC PATCH 10/12] arm/tegra: Add device tree support to pinmux driver   Stephen Warren
    • [RFC PATCH 10/12] arm/tegra: Add device tree support to pinmux driver   Jamie Iles
      • [RFC PATCH 10/12] arm/tegra: Add device tree support to pinmux driver   Jamie Iles
      • [RFC PATCH 10/12] arm/tegra: Add device tree support to pinmux driver   Stephen Warren
    • [RFC PATCH 10/12] arm/tegra: Add device tree support to pinmux driver   Jamie Iles
      • [RFC PATCH 10/12] arm/tegra: Add device tree support to pinmux driver   Jamie Iles
      • [RFC PATCH 10/12] arm/tegra: Add device tree support to pinmux driver   Stephen Warren
      • [RFC PATCH 10/12] arm/tegra: Add device tree support to pinmux driver   Jamie Iles
  • [RFC PATCH 11/12] arm/tegra: board-dt: Remove dependency on non-dt pinmux functions   Stephen Warren
  • [RFC PATCH 12/12] arm/tegra: Remove temporary gpio/pinmux registration workaround   Stephen Warren
    • [RFC PATCH 12/12] arm/tegra: Remove temporary gpio/pinmux registration workaround   Sergei Shtylyov
      • [RFC PATCH 12/12] arm/tegra: Remove temporary gpio/pinmux registration workaround   Stephen Warren
  • [RFC PATCH 00/12] arm/tegra: Initialize GPIO & pinmux from DT   Shawn Guo
    • [RFC PATCH 00/12] arm/tegra: Initialize GPIO & pinmux from DT   Stephen Warren
• [PATCH 0/4] Initial DT support for MSM8660   David Brown
  • [PATCH 1/4] msm_serial: Use relative resources for iomem   David Brown
  • [PATCH 2/4] msm_serial: Add devicetree support   David Brown
    • [PATCH 2/4] msm_serial: Add devicetree support   Arnd Bergmann
      • [PATCH 2/4] msm_serial: Add devicetree support   David Brown
      • [PATCH 2/4] msm_serial: Add devicetree support   Arnd Bergmann
      • [PATCH 2/4] msm_serial: Add devicetree support   David Brown
      • [PATCH 2/4] msm_serial: Add devicetree support   Arnd Bergmann
  • [PATCH 3/4] ARM: msm: Add devicetree support for msm8660-surf   David Brown
  • [PATCH 4/4] ARM: msm: Describe MSM 8660 SURF FPGA registers in DT   David Brown
• [PATCH 1/5] ARM: s3c64xx: PM: Mask and acknowledge all UART interrupts during core resume.   Tomasz Figa
  • [PATCH 1/5] ARM: s3c64xx: PM: Mask and acknowledge all UART interrupts during core resume.   Kukjin Kim
• [PATCH v2 0/8] Clean up MXC and MXS mach/gpio.h   Shawn Guo
  • [PATCH v2 1/8] ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage   Shawn Guo
  • [PATCH v2 2/8] arm/mxc: do not use gpio_to_irq() for static initializers   Shawn Guo
  • [PATCH v2 3/8] gpio/mxc: add .to_irq for gpio chip   Shawn Guo
  • [PATCH v2 4/8] arm/mxc: remove gpio_to_irq() from mach/gpio.h   Shawn Guo
  • [PATCH v2 5/8] gpio/mxc: move irq_to_gpio() into gpio-mxc driver   Shawn Guo
  • [PATCH v2 6/8] arm/mxc: move IMX_GPIO_NR into mach/hardware.h   Shawn Guo
  • [PATCH v2 7/8] gpio/mxs: move irq_to_gpio() into gpio-mxs driver   Shawn Guo
  • [PATCH v2 8/8] arm/mxs: move MXS_GPIO_NR into mach/mxs.h   Shawn Guo
  • [PATCH v2 0/8] Clean up MXC and MXS mach/gpio.h   Sascha Hauer
    • [PATCH v2 0/8] Clean up MXC and MXS mach/gpio.h   Shawn Guo
      • [PATCH v2 0/8] Clean up MXC and MXS mach/gpio.h   Sascha Hauer
      • [PATCH v2 0/8] Clean up MXC and MXS mach/gpio.h   Shawn Guo
• [PATCH v3 1/3] ARM: i.MX51: Remove _MX51_PAD_xxx references   Troy Kisky
  • [PATCH v3 1/3] ARM: i.MX51: Remove _MX51_PAD_xxx references   Sascha Hauer
    • [PATCH v3 1/3] ARM: i.MX51: Remove _MX51_PAD_xxx references   Troy Kisky
      • [PATCH v3 1/3] ARM: i.MX51: Remove _MX51_PAD_xxx references   Sascha Hauer
• [PATCH] shmobile/sh7372: Add missing CONFIG_PM guards to fix build failure   Peter Huewe
  • [PATCH] shmobile/sh7372: Add missing CONFIG_PM guards to fix build failure   Rafael J. Wysocki
    • [PATCH] shmobile/sh7372: Add missing CONFIG_PM guards to fix build failure   Peter Hüwe
      • [PATCH] shmobile/sh7372: Add missing CONFIG_PM guards to fix build failure   Rafael J. Wysocki
• FYI ARM GCC 4.6.x miscompiles the kernel   Krzysztof Halasa
  • FYI ARM GCC 4.6.x miscompiles the kernel   Marek Vasut
    • FYI GCC 4.6.x miscompiles the kernel   Krzysztof Halasa
• [GIT PULL] [3.2] Please pull tegra boards for 3.2   Olof Johansson
  • [GIT PULL] [3.2] Please pull tegra boards for 3.2   Olof Johansson
    • [GIT PULL] [3.2] Please pull tegra boards for 3.2   Arnd Bergmann
• [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Russell King - ARM Linux
  • [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Linus Walleij
  • [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
    • [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Russell King - ARM Linux
      • [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
      • [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Koul, Vinod
      • [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
      • [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Linus Walleij
      • [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
• [PATCH] ARM: S3C64XX: Use module identification for Craggamore system builds   Mark Brown
  • [PATCH v2] ARM: S3C64XX: Use module identification for Craggamore system builds   Mark Brown
• [PATCH] ARM: mm/alignment.c: Fix build breakage when CONFIG_PROC_FS is not selected   Bjarne Steinsbo
  • [PATCH] ARM: mm/alignment.c: Fix build breakage when CONFIG_PROC_FS is not selected   Dave Martin
    • [PATCH] ARM: mm/alignment.c: Fix build breakage when CONFIG_PROC_FS is not selected   Bjarne Steinsbo
      • [PATCH] ARM: mm/alignment.c: Fix build breakage when CONFIG_PROC_FS is not selected   Dave Martin
• [PATCH] omap2+:panda: Make hdmi_mux_init more robust.   Marek Belisko
• [PATCH] backlight: Fix broken regulator API usage in l4f00242t03   Mark Brown
  • [PATCH] backlight: Fix broken regulator API usage in l4f00242t03   Sascha Hauer
    • [PATCH] backlight: Fix broken regulator API usage in l4f00242t03   Mark Brown
      • [PATCH] backlight: Fix broken regulator API usage in l4f00242t03   Sascha Hauer
• [PATCH V4 0/3] ARM: mmp: add audio sram support   Leo Yan
  • [PATCH 1/3] ARM: mmp: add sram allocator   Leo Yan
    • [PATCH 1/3] ARM: mmp: add sram allocator   Arnd Bergmann
      • [PATCH 1/3] ARM: mmp: add sram allocator   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/3] ARM: mmp: add sram allocator   Haojian Zhuang
      • [PATCH 1/3] ARM: mmp: add sram allocator   Leo Yan
      • [PATCH 1/3] ARM: mmp: add sram allocator   Nicolas Pitre
      • [PATCH 1/3] ARM: mmp: add sram allocator   Russell King - ARM Linux
    • [PATCH 1/3] ARM: mmp: add sram allocator   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE   Andres Salomon
      • [PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE   Eric Miao
      • [PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE   Andres Salomon
      • [PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE   Leo Yan
      • [PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE   Haojian Zhuang
      • [PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE   Russell King - ARM Linux
      • [PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE   Andres Salomon
  • [PATCH 2/3] ARM: mmp: register audio sram bank   Leo Yan
  • [PATCH 3/3] ARM: mmp: register internal sram bank   Leo Yan
  • [PATCH V4 0/3] ARM: mmp: add audio sram support   Haojian Zhuang
    • [PATCH V4 0/3] ARM: mmp: add audio sram support   Eric Miao
      • [PATCH V4 0/3] ARM: mmp: add audio sram support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH V4 0/3] ARM: mmp: add audio sram support   Eric Miao
      • [PATCH V4 0/3] ARM: mmp: add audio sram support   Leo Yan
      • [PATCH V4 0/3] ARM: mmp: add audio sram support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH V4 0/3] ARM: mmp: add audio sram support   Haojian Zhuang
• [PATCH] [ARM] davinci: gpio: eliminate unused variable warnings   Axel Lin
• [PATCH] mfd wm8350: rename static gpio_set_debounce()   Uwe Kleine-König
• [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Eric Miao
  • [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
    • [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Eric Miao
• [PATCH] video: nuc900fb: remove include of mach/clkdev.h   Axel Lin
• [PATCH 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver   Thomas Abraham
• [PATCH] amba: consolidate PrimeCell magic   Linus Walleij
  • [PATCH] amba: consolidate PrimeCell magic   Russell King - ARM Linux
    • [PATCH] amba: consolidate PrimeCell magic   Linus Walleij
  • [PATCH] amba: consolidate PrimeCell magic   Boojin Kim
    • [PATCH] amba: consolidate PrimeCell magic   Linus Walleij
      • [PATCH] amba: consolidate PrimeCell magic   Boojin Kim
      • [PATCH] amba: consolidate PrimeCell magic   Linus Walleij
      • [PATCH] amba: consolidate PrimeCell magic   Boojin Kim
  • [PATCH] amba: consolidate PrimeCell magic   Jassi Brar
    • [PATCH] amba: consolidate PrimeCell magic   Russell King - ARM Linux
      • [PATCH] amba: consolidate PrimeCell magic   Jassi Brar
      • [PATCH] amba: consolidate PrimeCell magic   Russell King - ARM Linux
      • [PATCH] amba: consolidate PrimeCell magic   Jassi Brar
• [RFC PATCH 00/15] ARM: perf: support multiple PMUs   Mark Rutland
  • [RFC PATCH 00/15] ARM: perf: support multiple PMUs   Mark Rutland
• [RFC PATCH 00/15] ARM: perf: support multiple PMUs   Mark Rutland
  • [RFC PATCH 01/15] perf: provide PMU when initing events   Mark Rutland
  • [RFC PATCH 02/15] ARM: perf: only register a CPU PMU when present   Mark Rutland
  • [RFC PATCH 03/15] ARM: perf: clean up event group validation   Mark Rutland
  • [RFC PATCH 04/15] ARM: perf: remove active_mask   Mark Rutland
  • [RFC PATCH 05/15] ARM: perf: move active_events into struct arm_pmu   Mark Rutland
  • [RFC PATCH 06/15] ARM: perf: move platform device to struct arm_pmu   Mark Rutland
  • [RFC PATCH 07/15] ARM: perf: indirect access to cpu_hw_events   Mark Rutland
  • [RFC PATCH 08/15] ARM: perf: remove unnecessary armpmu->stop   Mark Rutland
  • [RFC PATCH 09/15] ARM: perf: lock PMU registers per-CPU   Mark Rutland
  • [RFC PATCH 10/15] ARM: perf: add type field to struct arm_pmu   Mark Rutland
  • [RFC PATCH 11/15] ARM: perf: refactor event mapping   Mark Rutland
  • [RFC PATCH 12/15] ARM: perf: add support for multiple PMUs   Mark Rutland
  • [RFC PATCH 13/15] ARM: perf: remove event limit from pmu_hw_events   Mark Rutland
  • [RFC PATCH 14/15] ARM: perf: remove cpu-related misnomers   Mark Rutland
  • [RFC PATCH 15/15] ARM: perf: move arm_pmu into <asm/pmu.h>   Mark Rutland
  • [RFC PATCH 00/15] ARM: perf: support multiple PMUs   Jamie Iles
• [PATCH 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver   Thomas Abraham
  • [PATCH 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver   Russell King - ARM Linux
• [PATCH] atmel_serial: RS485: receiving enabled when sending data   Bernhard Roth
  • [PATCH] atmel_serial: RS485: receiving enabled when sending data   Greg KH
    • [PATCH] atmel_serial: RS485: receiving enabled when sending data   Claudio Scordino
      • [PATCH] atmel_serial: RS485: receiving enabled when sending data   Russell King - ARM Linux
      • [PATCH] atmel_serial: RS485: receiving enabled when sending data   Claudio Scordino
      • [PATCH] atmel_serial: RS485: receiving enabled when sending data   Alan Cox
      • [PATCH] atmel_serial: RS485: receiving enabled when sending data   Russell King - ARM Linux
      • [PATCH] atmel_serial: RS485: receiving enabled when sending data   Greg KH
      • [PATCH] atmel_serial: RS485: receiving enabled when sending data   Claudio Scordino
• [PATCH] ARM: S3C64XX: Remove unused CPU devices for Cragganmore   Mark Brown
  • [PATCH] ARM: S3C64XX: Remove unused CPU devices for Cragganmore   Kukjin Kim
• [PATCH] backlight: Fix broken regulator API usage in l4f00242t03   Mark Brown
  • [PATCH] backlight: Fix broken regulator API usage in l4f00242t03   Fabio Estevam
• [PATCH] arm: footbridge: Netwinder: Add KConfig select CLKEVT_I8253 to fix build failure   Peter Huewe
  • [PATCH] arm: footbridge: Netwinder: Add KConfig select CLKEVT_I8253 to fix build failure   Russell King - ARM Linux
    • [PATCH v2] arm: footbridge: Netwinder: Add KConfig select CLKEVT_I8253 to fix build failure   Peter Huewe
• [PATCH 1/1] fixup! ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Catalin Marinas
• [PATCH v2 0/8] Introduce logical CPU mapping   Will Deacon
  • [PATCH v2 1/8] ARM: cpuid: add support for reading MPIDR   Will Deacon
    • [PATCH v2 1/8] ARM: cpuid: add support for reading MPIDR   Vincent Guittot
      • [PATCH v2 1/8] ARM: cpuid: add support for reading MPIDR   Will Deacon
  • [PATCH v2 2/8] ARM: smp: populate logical CPU mapping during boot   Will Deacon
  • [PATCH v2 3/8] ARM: gic: convert logical CPU numbers into physical numbers   Will Deacon
  • [PATCH v2 4/8] ARM: exynos4: convert logical CPU numbers to physical numbers   Will Deacon
  • [PATCH v2 5/8] ARM: msm: convert logical CPU numbers to physical numbers   Will Deacon
  • [PATCH v2 6/8] ARM: shmobile: convert logical CPU numbers to physical numbers   Will Deacon
    • [PATCH v2 6/8] ARM: shmobile: convert logical CPU numbers to physical numbers   Will Deacon
  • [PATCH v2 7/8] ARM: ux500: convert logical CPU numbers to physical numbers   Will Deacon
  • [PATCH v2 8/8] ARM: versatile: convert logical CPU numbers to physical numbers   Will Deacon
• [PATCH] ARM: s3c24xx: ensure cpu_reset is only called when memory is flat-mapped   Will Deacon
  • [PATCH] ARM: s3c24xx: ensure cpu_reset is only called when memory is flat-mapped   Heiko Stübner
• [PATCH v2 0/5] ARM: hw_breakpoint: updates for 3.2   Will Deacon
  • [PATCH v2 2/5] ARM: hw_breakpoint: reserve one breakpoint for watchpoint stepping   Will Deacon
  • [PATCH v2 3/5] ARM: hw_breakpoint: add support for multiple watchpoints   Will Deacon
  • [PATCH v2 4/5] ARM: hw_breakpoint: trap undef instruction exceptions in reset_ctrl_regs   Will Deacon
  • [PATCH v2 5/5] ARM: hw_breakpoint: reduce the number of WARN_ONCE invocations   Will Deacon
• [PATCH v2 1/5] ARM: hw_breakpoint: add initial Cortex-A15 (debug v7.1) support   Will Deacon
• [PATCH] i2c: tegra: Check for overflow errors with BUG_ON.   Doug Anderson
  • [PATCH] i2c: tegra: Check for overflow errors with BUG_ON.   Felipe Balbi
    • [PATCH] i2c: tegra: Check for overflow errors with BUG_ON.   Doug Anderson
      • [PATCH] i2c: tegra: Check for overflow errors with BUG_ON.   Felipe Balbi
      • [PATCH] i2c: tegra: Check for overflow errors with BUG_ON.   Ben Dooks
  • [PATCH v2] i2c: tegra: Check for overflow errors with BUG_ON.   Doug Anderson
    • [PATCH v2] i2c: tegra: Check for overflow errors with BUG_ON.   Stephen Warren
    • [PATCH v2] i2c: tegra: Check for overflow errors with BUG_ON.   Felipe Balbi
    • [PATCH v2] i2c: tegra: Check for overflow errors with BUG_ON.   Rhyland Klein
• [PATCH] Fix build errors with gpio-generic.c   Russell King - ARM Linux
• [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Stephen Warren
  • [RFC PATCH v2 01/13] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs   Stephen Warren
  • [RFC PATCH v2 02/13] arm/tegra: Avoid duplicate gpio/pinmux devices with dt   Stephen Warren
    • [RFC PATCH v2 02/13] arm/tegra: Avoid duplicate gpio/pinmux devices with dt   Stephen Warren
  • [RFC PATCH v2 03/13] arm/tegra: board-dt: Add AUXDATA for tegra-gpio and tegra-pinmux   Stephen Warren
    • [RFC PATCH v2 03/13] arm/tegra: board-dt: Add AUXDATA for tegra-gpio and tegra-pinmux   Shawn Guo
      • [RFC PATCH v2 03/13] arm/tegra: board-dt: Add AUXDATA for tegra-gpio and tegra-pinmux   Stephen Warren
  • [RFC PATCH v2 04/13] docs/dt: Document nvidia, tegra20-gpio's nvidia, enabled-gpios property   Stephen Warren
  • [RFC PATCH v2 05/13] arm/dt: Tegra: Add nvidia, gpios property to GPIO controller   Stephen Warren
  • [RFC PATCH v2 06/13] docs/dt: Document nvidia,tegra20-pinmux binding   Stephen Warren
    • [RFC PATCH v2 06/13] docs/dt: Document nvidia,tegra20-pinmux binding   Shawn Guo
    • [RFC PATCH v2 06/13] docs/dt: Document nvidia, tegra20-pinmux binding   Arnd Bergmann
      • [RFC PATCH v2 06/13] docs/dt: Document nvidia,tegra20-pinmux binding   Stephen Warren
      • [RFC PATCH v2 06/13] docs/dt: Document nvidia,tegra20-pinmux binding   Shawn Guo
      • [RFC PATCH v2 06/13] docs/dt: Document nvidia,tegra20-pinmux binding   Shawn Guo
      • [RFC PATCH v2 06/13] docs/dt: Document nvidia, tegra20-pinmux binding   Arnd Bergmann
      • [RFC PATCH v2 06/13] docs/dt: Document nvidia,tegra20-pinmux binding   Jamie Iles
      • [RFC PATCH v2 06/13] docs/dt: Document nvidia,tegra20-pinmux binding   Stephen Warren
  • [RFC PATCH v2 07/13] arm/dt: Tegra: Add pinmux node   Stephen Warren
  • [RFC PATCH v2 08/13] gpio/tegra: Convert to a platform device   Stephen Warren
  • [RFC PATCH v2 09/13] gpio/tegra: Add device tree support   Stephen Warren
    • [RFC PATCH v2 09/13] gpio/tegra: Add device tree support   Shawn Guo
  • [RFC PATCH v2 10/13] arm/tegra: Convert pinmux driver to a platform device   Stephen Warren
  • [RFC PATCH v2 11/13] arm/tegra: Add device tree support to pinmux driver   Stephen Warren
    • [RFC PATCH v2 11/13] arm/tegra: Add device tree support to pinmux driver   Shawn Guo
      • [RFC PATCH v2 11/13] arm/tegra: Add device tree support to pinmux driver   Stephen Warren
  • [RFC PATCH v2 12/13] arm/tegra: board-dt: Remove dependency on non-dt pinmux functions   Stephen Warren
  • [RFC PATCH v2 13/13] arm/tegra: Remove temporary gpio/pinmux registration workaround   Stephen Warren
  • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Arnd Bergmann
    • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Linus Walleij
      • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Arnd Bergmann
      • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Linus Walleij
      • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Stephen Warren
      • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Arnd Bergmann
      • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Stephen Warren
      • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Arnd Bergmann
      • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Linus Walleij
      • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Stephen Warren
      • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Linus Walleij
  • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Stephen Warren
    • [RFC PATCH v2 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Olof Johansson
• [PATCH] ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks   Axel Lin
  • [PATCH] ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks   Heiko Stübner
    • [PATCH] ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks   Ben Dooks
• [PATCH] ARM: mmp: rename SHEEVAD to GPLUGD   Eric Miao
  • [PATCH] ARM: mmp: rename SHEEVAD to GPLUGD   Tanmay Upadhyay
    • [PATCH] ARM: mmp: rename SHEEVAD to GPLUGD   Russell King - ARM Linux
  • [PATCH] ARM: mmp: rename SHEEVAD to GPLUGD   Linus Walleij
• [PATCH] ARM: tegra: Add missing include of linux/erron.h and linux/types.h   Axel Lin
  • [PATCH] ARM: tegra: Add missing include of linux/erron.h and linux/types.h   Baruch Siach
  • [PATCH] ARM: tegra: Add missing include of linux/erron.h and linux/types.h   Stephen Warren
• [PATCH RESEND] ARM: tegra: Add missing include of linux/errno.h and linux/types.h   Axel Lin
• [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Igor Grinberg
  • [PATCH v2 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH v2] amba: consolidate PrimeCell magic   Linus Walleij
  • [PATCH v2] amba: consolidate PrimeCell magic   H Hartley Sweeten
    • [PATCH v2] amba: consolidate PrimeCell magic   Linus Walleij
• [PATCH] ARM: S3C64XX: Remove un-used code   Banajit Goswami
  • [PATCH] ARM: S3C64XX: Remove un-used code   Mark Brown
    • [PATCH] ARM: S3C64XX: Remove un-used code   Banajit Goswami
      • [PATCH] ARM: S3C64XX: Remove un-used code   Mark Brown
      • [PATCH] ARM: S3C64XX: Remove un-used code   Kukjin Kim
      • [PATCH] ARM: S3C64XX: Remove un-used code   Banajit Goswami
      • [PATCH] ARM: S3C64XX: Remove un-used code   Banajit Goswami
  • [PATCH] ARM: S3C64XX: Remove un-used code   Kukjin Kim
• [PATCH v2] ARM: S3C64XX: Use module identification for Craggamore system builds   Mark Brown
  • [PATCH v2] ARM: S3C64XX: Use module identification for Craggamore system builds   Kukjin Kim
    • [PATCH v2] ARM: S3C64XX: Use module identification for Craggamore system builds   Mark Brown
      • [PATCH v2] ARM: S3C64XX: Use module identification for Craggamore system builds   Kukjin Kim
• [GIT PULL] dmaengine: at_hdmac fixes for next   Nicolas Ferre
  • [GIT PULL] dmaengine: at_hdmac fixes for next   Koul, Vinod
    • [GIT PULL] dmaengine: at_hdmac fixes for next   Nicolas Ferre
      • [GIT PULL] dmaengine: at_hdmac fixes for next   Koul, Vinod
• [PATCH 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Dave Martin
  • [PATCH 3/3] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Dave Martin
    • [PATCH 3/3] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Tixy
      • [PATCH 3/3] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Nicolas Pitre
      • [PATCH 3/3] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Dave Martin
      • [PATCH 3/3] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Nicolas Pitre
      • [PATCH 3/3] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Dave Martin
  • [PATCH 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Tixy
    • [PATCH 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Dave Martin
      • [PATCH 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Tixy
• [PATCH 1/3] ARM: Make cpu_alignment into a global variable   Dave Martin
  • [PATCH 1/3] ARM: Make cpu_alignment into a global variable   Nicolas Pitre
    • [PATCH 1/3] ARM: Make cpu_alignment into a global variable   Dave Martin
  • [PATCH 1/3] ARM: Make cpu_alignment into a global variable   Sergei Shtylyov
    • [PATCH 1/3] ARM: Make cpu_alignment into a global variable   Dave Martin
• [PATCH 2/3] ARM: entry: Remove unnecessary masking when decoding Thumb-2 instructions   Dave Martin
  • [PATCH 2/3] ARM: entry: Remove unnecessary masking when decoding Thumb-2 instructions   Nicolas Pitre
    • [PATCH 2/3] ARM: entry: Remove unnecessary masking when decoding Thumb-2 instructions   Dave Martin
• [PATCH] ARM: Add safe diagnostic to indicate when __cpu_architecture isn't set up   Dave Martin
  • [PATCH] ARM: Add safe diagnostic to indicate when __cpu_architecture isn't set up   Tixy
    • [PATCH] ARM: Add safe diagnostic to indicate when __cpu_architecture isn't set up   Nicolas Pitre
      • [PATCH] ARM: Add safe diagnostic to indicate when __cpu_architecture isn't set up   Dave Martin
      • [PATCH] ARM: Add safe diagnostic to indicate when __cpu_architecture isn't set up   Nicolas Pitre
      • [PATCH] ARM: Add safe diagnostic to indicate when __cpu_architecture isn't set up   Dave Martin
• Fwd: [GIT PULL] [3.2] Please pull tegra boards for 3.2   Arnd Bergmann
  • Fwd: [GIT PULL] [3.2] Please pull tegra boards for 3.2   Nicolas Pitre
    • Fwd: [GIT PULL] [3.2] Please pull tegra boards for 3.2   Thomas Gleixner
  • Fwd: [GIT PULL] [3.2] Please pull tegra boards for 3.2   Olof Johansson
    • Fwd: [GIT PULL] [3.2] Please pull tegra boards for 3.2   Arnd Bergmann
      • Fwd: [GIT PULL] [3.2] Please pull tegra boards for 3.2   Olof Johansson
      • Fwd: [GIT PULL] [3.2] Please pull tegra boards for 3.2   Russell King - ARM Linux
      • Fwd: [GIT PULL] [3.2] Please pull tegra boards for 3.2   Sascha Hauer
• [PATCH] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen   Mark Brown
  • [PATCH] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen   Inderpal Singh
• [GIT PULL] mmc: atmel rework for next   Nicolas Ferre
  • [GIT PULL] mmc: atmel rework for next   Chris Ball
    • [GIT PULL] mmc: atmel rework for next   Nicolas Ferre
• [PATCH] ARM: mxs: Remove unused header file   Fabio Estevam
• [PATCH v2 0/4] Initial DT support for MSM8660   David Brown
  • [PATCH v2 2/4] msm_serial: Add devicetree support   David Brown
  • [PATCH v2 3/4] ARM: msm: Add devicetree support for msm8660-surf   David Brown
  • [PATCH v2 4/4] ARM: msm: Describe MSM 8660 SURF FPGA registers in DT   David Brown
• [PATCH v2 1/4] msm_serial: Use relative resources for iomem   David Brown
• [PATCH 0/6] Initial Calxeda Highbank support   Rob Herring
  • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
    • [PATCH 2/6] ARM: add Highbank core platform support   Jamie Iles
      • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
    • [PATCH 2/6] ARM: add Highbank core platform support   Russell King - ARM Linux
    • [PATCH 2/6] ARM: add Highbank core platform support   Arnd Bergmann
      • [PATCH 2/6] ARM: add Highbank core platform support   Russell King - ARM Linux
      • [PATCH 2/6] ARM: add Highbank core platform support   Arnd Bergmann
      • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
      • [PATCH 2/6] ARM: add Highbank core platform support   Russell King - ARM Linux
      • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
      • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
      • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
      • [PATCH 2/6] ARM: add Highbank core platform support   Arnd Bergmann
      • [PATCH 2/6] ARM: add Highbank core platform support   Arnd Bergmann
      • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
      • [PATCH 2/6] ARM: add Highbank core platform support   Arnd Bergmann
    • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
      • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
      • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
      • [PATCH 2/6] ARM: add Highbank core platform support   Dave Martin
      • [PATCH 2/6] ARM: add Highbank core platform support   Arnd Bergmann
    • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
      • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
    • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
    • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
      • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
    • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
      • [PATCH 2/6] ARM: add Highbank core platform support   Jamie Iles
      • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
    • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
      • [PATCH 2/6] ARM: add Highbank core platform support   Shawn Guo
      • [PATCH 2/6] ARM: add Highbank core platform support   Rob Herring
  • [PATCH 4/6] ARM: highbank: add SMP support   Rob Herring
    • [PATCH 4/6] ARM: highbank: add SMP support   Russell King - ARM Linux
      • [PATCH 4/6] ARM: highbank: add SMP support   Rob Herring
      • [PATCH 4/6] ARM: highbank: add SMP support   Russell King - ARM Linux
  • [PATCH 5/6] ARM: highbank: Add cpu hotplug support   Rob Herring
  • [PATCH 6/6] ARM: highbank: add suspend support   Rob Herring
    • [PATCH 6/6] ARM: highbank: add suspend support   Shawn Guo
• [PATCH 1/6] ARM: highbank: add devicetree source   Rob Herring
  • [PATCH 1/6] ARM: highbank: add devicetree source   Shawn Guo
    • [PATCH 1/6] ARM: highbank: add devicetree source   Rob Herring
      • [PATCH 1/6] ARM: highbank: add devicetree source   Shawn Guo
      • [PATCH 1/6] ARM: highbank: add devicetree source   Rob Herring
      • [PATCH 1/6] ARM: highbank: add devicetree source   Will Deacon
      • [PATCH 1/6] ARM: highbank: add devicetree source   Rob Herring
  • [PATCH 1/6] ARM: highbank: add devicetree source   Mark Rutland
  • [PATCH 1/6] ARM: highbank: add devicetree source   Shawn Guo
    • [PATCH 1/6] ARM: highbank: add devicetree source   Rob Herring
• [PATCH 3/6] MAINTAINERS: add Calxeda Highbank ARM platform   Rob Herring
• [RFC,PATCH] arch/arm: compute and export NR_syscalls   Will Drewry
  • [RFC,PATCH] arch/arm: compute and export NR_syscalls   Arnd Bergmann
    • [RFC,PATCH] arch/arm: compute and export NR_syscalls   Will Drewry
      • [RFC,PATCH] arch/arm: compute and export NR_syscalls   Mikael Pettersson
      • [RFC,PATCH] arch/arm: compute and export NR_syscalls   Arnd Bergmann
      • [RFC,PATCH] arch/arm: compute and export NR_syscalls   Russell King - ARM Linux
      • [RFC,PATCH] arch/arm: compute and export NR_syscalls   Will Drewry
• [PATCH 0/3] ARM: Samsung: use dma-pl330 device name for clock   Vladimir Zapolskiy
  • [PATCH 3/3] ARM: S5PV210: use dma-pl330 device name for clock   Vladimir Zapolskiy
  • [PATCH 0/3] ARM: Samsung: use dma-pl330 device name for clock   Kukjin Kim
• [PATCH 1/3] ARM: EXYNOS4: use dma-pl330 device name for clock   Vladimir Zapolskiy
  • [PATCH 1/3] ARM: EXYNOS4: use dma-pl330 device name for clock   Boojin Kim
• [PATCH 2/3] ARM: S5PC100: use dma-pl330 device name for clock   Vladimir Zapolskiy
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Will Deacon
  • [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection   Will Deacon
  • [PATCH 3/3] ARM: realview: use Kconfig choice for debug UART selection   Will Deacon
  • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Nicolas Pitre
    • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Will Deacon
  • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Shawn Guo
    • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Will Deacon
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Shawn Guo
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Will Deacon
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Shawn Guo
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Will Deacon
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Nicolas Pitre
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Russell King - ARM Linux
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Nicolas Pitre
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Russell King - ARM Linux
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Nicolas Pitre
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Russell King - ARM Linux
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Russell King - ARM Linux
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Nicolas Pitre
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Russell King - ARM Linux
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Nicolas Pitre
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Russell King - ARM Linux
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Nicolas Pitre
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Nicolas Pitre
      • [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Nicolas Pitre
  • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Shawn Guo
    • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Sascha Hauer
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Shawn Guo
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Will Deacon
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Sascha Hauer
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Will Deacon
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Sascha Hauer
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Russell King - ARM Linux
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Will Deacon
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Nicolas Pitre
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Russell King - ARM Linux
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Nicolas Pitre
      • [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Russell King - ARM Linux
• [PATCH] ARM: SAMSUNG: Modify the devname for pl330 clock   Boojin Kim
  • [PATCH] ARM: SAMSUNG: Modify the devname for pl330 clock   Vladimir Zapolskiy
    • [PATCH] ARM: SAMSUNG: Modify the devname for pl330 clock   Boojin Kim
      • [PATCH] ARM: SAMSUNG: Modify the devname for pl330 clock   Vladimir Zapolskiy
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Paul Walmsley
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Paul Walmsley
• [PATCH 0/3] ARM: SAMSUNG: register the second instance of PL330 DMAC   alim akhtar
  • [PATCH 1/3] ARM: EXYNOS4: register the second instance of pl330 DMAC   alim akhtar
  • [PATCH 2/3] ARM: S5PV210: register the second instance of pl330 DMAC   alim akhtar
  • [PATCH 3/3] ARM: S5PC100: register the second instance of pl330 DMAC   alim akhtar
  • [PATCH 0/3] ARM: SAMSUNG: register the second instance of PL330 DMAC   Kyungmin Park
• [RFC] ARM: l2x0: suspend/resume entries   Barry Song
• [PATCH] ARM: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDER   Axel Lin
  • [PATCH] ARM: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDER   Thomas Gleixner
• [PATCH 00/10] Clean up some io.h and associated code   Russell King - ARM Linux
  • [PATCH 01/10] ARM: io: s3c2410: remove ioaddr()   Russell King - ARM Linux
  • [PATCH 02/10] ARM: io: RiscPC: define io addresses relative to IO_BASE   Russell King - ARM Linux
  • [PATCH 03/10] ARM: io: ecard: move ioaddr() inside __ecard_address   Russell King - ARM Linux
  • [PATCH 04/10] ARM: io: ecard: remove ioaddr() from ecard.c   Russell King - ARM Linux
  • [PATCH 05/10] ARM: io: RiscPC: make EASI_BASE a void iomem pointer   Russell King - ARM Linux
  • [PATCH 06/10] ARM: io: RiscPC: eliminate private inb() et.al. definitions   Russell King - ARM Linux
  • [PATCH 07/10] ARM: io: add a default IO_SPACE_LIMIT definition   Russell King - ARM Linux
  • [PATCH 08/10] ARM: io: remove IO_SPACE_LIMIT from platforms with ISA/PCI and 64K window   Russell King - ARM Linux
  • [PATCH 09/10] ARM: io: remove IO_SPACE_LIMIT from platforms without PCI/ISA   Russell King - ARM Linux
  • [PATCH 10/10] ARM: io: remove IO_SPACE_LIMIT from SA11x0   Russell King - ARM Linux
  • [PATCH 00/10] Clean up some io.h and associated code   Arnd Bergmann
    • [PATCH 00/10] Clean up some io.h and associated code   Russell King - ARM Linux
      • [PATCH 00/10] Clean up some io.h and associated code   Arnd Bergmann
• [PATCH v3] amba: consolidate PrimeCell magic   Linus Walleij
  • [PATCH v3] amba: consolidate PrimeCell magic   Jassi Brar
  • [PATCH v3] amba: consolidate PrimeCell magic   H Hartley Sweeten
    • [PATCH v3] amba: consolidate PrimeCell magic   Russell King - ARM Linux
      • [PATCH v3] amba: consolidate PrimeCell magic   Linus Walleij
      • [PATCH v3] amba: consolidate PrimeCell magic   Tixy
      • [PATCH v3] amba: consolidate PrimeCell magic   Russell King - ARM Linux
• [PATCH] ARM: mach-orion5x: add missing header file <linux/vga.h>   Bryan Wu
• [PATCH] ARM: mach-footbridge: add missing header file <video/vga.h>   Bryan Wu
  • [PATCH] ARM: mach-footbridge: add missing header file <video/vga.h>   Bryan Wu
    • [PATCH] ARM: mach-footbridge: add missing header file <video/vga.h>   Russell King - ARM Linux
      • [PATCH] ARM: mach-footbridge: add missing header file <video/vga.h>   Bryan Wu
      • [PATCH] ARM: mach-footbridge: add missing header file <video/vga.h>   Rob Herring
• [GIT PULL] u300 cleanups   Linus Walleij
  • [GIT PULL] u300 cleanups   Linus Walleij
    • [GIT PULL] u300 cleanups   Arnd Bergmann
• [RFC PATCH 0/2] WIP: generic OF pinmux binding   Jamie Iles
  • [RFC PATCH 1/2] of: add a generic pinmux helper   Jamie Iles
  • [RFC PATCH 2/2] arm/tegra: Add device tree support to pinmux driver   Jamie Iles
  • [RFC PATCH 0/2] WIP: generic OF pinmux binding   Linus Walleij
  • [RFC PATCH 0/2] WIP: generic OF pinmux binding   Shawn Guo
  • [RFC PATCH 0/2] WIP: generic OF pinmux binding   Stephen Warren
  • [RFC PATCH 0/2] WIP: generic OF pinmux binding   Stephen Warren
• [PATCH v9 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
  • [PATCH v9 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Huang Shijie
    • [PATCH v9 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Marek Vasut
      • [PATCH v9 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Huang Shijie
      • [PATCH v9 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Marek Vasut
      • [PATCH v9 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Huang Shijie
  • [PATCH v9 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
  • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
  • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Artem Bityutskiy
    • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Artem Bityutskiy
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Marek Vasut
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Marek Vasut
  • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Marek Vasut
    • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Marek Vasut
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Marek Vasut
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Marek Vasut
      • [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
• [PATCH v9 3/3] MTD : add GPMI-NAND driver in the config and Makefile   Huang Shijie
• [PATCH 1/1] sgtl5000: fix record unwork issue   Dong Aisheng
• [PATCH 1/6] ARM: highbank: add devicetree source   Rob Herring
  • [PATCH 1/6] ARM: highbank: add devicetree source   Will Deacon
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Santosh
• plat-orion problems with mv643xx_eth.c for mv78xx0   Joey Oravec
  • plat-orion problems with mv643xx_eth.c for mv78xx0   Lennert Buytenhek
• plat-orion needs to enable PCIe ports for mv78xx0   Joey Oravec
  • plat-orion needs to enable PCIe ports for mv78xx0   Lennert Buytenhek
  • plat-orion needs to enable PCIe ports for mv78xx0   Lennert Buytenhek
• [PATCH 0/7] omap: iommu migration, relocation and cleanups   Ohad Ben-Cohen
  • [PATCH 5/7] omap: iovmm: remove unused functionality   Ohad Ben-Cohen
    • [PATCH 5/7] omap: iovmm: remove unused functionality   Hiroshi DOYU
      • [PATCH 5/7] omap: iovmm: remove unused functionality   Ohad Ben-Cohen
      • [PATCH 5/7] omap: iovmm: remove unused functionality   Hiroshi DOYU
  • [PATCH 7/7] omap: iommu: omapify 'struct iommu' and exposed API   Ohad Ben-Cohen
  • [PATCH 0/7] omap: iommu migration, relocation and cleanups   Laurent Pinchart
    • [PATCH 0/7] omap: iommu migration, relocation and cleanups   Hiroshi DOYU
  • [PATCH 0/7] omap: iommu migration, relocation and cleanups   Roedel, Joerg
    • [PATCH 0/7] omap: iommu migration, relocation and cleanups   Ohad Ben-Cohen
• [PATCH 1/7] omap: iommu: migrate to the generic IOMMU API   Ohad Ben-Cohen
  • [PATCH 1/7] omap: iommu: migrate to the generic IOMMU API   Laurent Pinchart
    • [PATCH 1/7] omap: iommu: migrate to the generic IOMMU API   Ohad Ben-Cohen
    • [PATCH 1/7] omap: iommu: migrate to the generic IOMMU API   Arnd Bergmann
  • [PATCH 1/7] omap: iommu: migrate to the generic IOMMU API   Roedel, Joerg
    • [PATCH 1/7] omap: iommu: migrate to the generic IOMMU API   Ohad Ben-Cohen
      • [PATCH 1/7] omap: iommu: migrate to the generic IOMMU API   Ohad Ben-Cohen
      • [PATCH 1/7] omap: iommu: migrate to the generic IOMMU API   Roedel, Joerg
      • [PATCH 1/7] omap: iommu: migrate to the generic IOMMU API   Ohad Ben-Cohen
• [PATCH 2/7] omap: iommu/iovmm: move to dedicated iommu folder   Ohad Ben-Cohen
  • [PATCH 2/7] omap: iommu/iovmm: move to dedicated iommu folder   Arnd Bergmann
    • [PATCH 2/7] omap: iommu/iovmm: move to dedicated iommu folder   Ohad Ben-Cohen
• [PATCH 3/7] omap: iommu: stop exporting local functions   Ohad Ben-Cohen
• [PATCH 4/7] omap: iommu: PREFETCH_IOTLB cleanup   Ohad Ben-Cohen
  • [PATCH 4/7] omap: iommu: PREFETCH_IOTLB cleanup   Hiroshi DOYU
    • [PATCH 4/7] omap: iommu: PREFETCH_IOTLB cleanup   Ohad Ben-Cohen
• [PATCH 6/7] omap: iommu: remove unused exported API   Ohad Ben-Cohen
  • [PATCH 6/7] omap: iommu: remove unused exported API   Hiroshi DOYU
    • [PATCH 6/7] omap: iommu: remove unused exported API   Ohad Ben-Cohen
      • [PATCH 6/7] omap: iommu: remove unused exported API   David Cohen
      • [PATCH 6/7] omap: iommu: remove unused exported API   Ohad Ben-Cohen
• [PATCH] ARM: S5P64X0: Add the devname for DMA clock   Boojin Kim
  • [PATCH] ARM: S5P64X0: Add the devname for DMA clock   Kukjin Kim
• [PATCH v4] amba: consolidate PrimeCell magic   Linus Walleij
  • [PATCH v4] amba: consolidate PrimeCell magic   Viresh Kumar
  • [PATCH v4] amba: consolidate PrimeCell magic   H Hartley Sweeten
  • [PATCH v4] amba: consolidate PrimeCell magic   Kukjin Kim
• [PATCH 1/1] omap: iommu: remove obsolete comments   Hiroshi DOYU
• [PATCH] CPUFREQ: ARM Exynos4210 PM/Suspend Compatibility with Different Bootloaders   MyungJoo Ham
  • [PATCH] CPUFREQ: ARM Exynos4210 PM/Suspend Compatibility with Different Bootloaders   MyungJoo Ham
• [PATCH v2 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Dave Martin
  • [PATCH v2 2/3] ARM: entry: Remove unnecessary masking when decoding Thumb-2 instructions   Dave Martin
  • [PATCH v2 3/3] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Dave Martin
  • [PATCH v2 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Russell King - ARM Linux
    • [PATCH v2 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Tixy
      • [PATCH v2 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Dave Martin
      • [PATCH v2 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Tixy
    • [PATCH v2 0/3] Fix Thumb-2 undef handling for mixed-arch kernels   Dave Martin
• [PATCH v2 1/3] ARM: Make cpu_architecture into a global variable   Dave Martin
• of_iomap() matched with plan iounmap()   David Brown
  • of_iomap() matched with plan iounmap()   David Miller
    • of_iomap() matched with plan iounmap()   Arnd Bergmann
      • of_iomap() matched with plan iounmap()   David Miller
      • of_iomap() matched with plan iounmap()   Arnd Bergmann
      • of_iomap() matched with plan iounmap()   David Miller
      • of_iomap() matched with plan iounmap()   David Brown
• [PATCH v3 0/4] Initial DT support for MSM8660   David Brown
  • [PATCH v3 1/4] msm_serial: Use relative resources for iomem   David Brown
  • [PATCH v3 2/4] msm_serial: Add devicetree support   David Brown
    • [PATCH v3 2/4] msm_serial: Add devicetree support   Arnd Bergmann
  • [PATCH v3 3/4] ARM: msm: Add devicetree support for msm8660-surf   David Brown
    • [PATCH v3 3/4] ARM: msm: Add devicetree support for msm8660-surf   Arnd Bergmann
  • [PATCH v3 4/4] ARM: msm: Describe MSM 8660 SURF FPGA registers in DT   David Brown
    • [PATCH v3 4/4] ARM: msm: Describe MSM 8660 SURF FPGA registers in DT   Arnd Bergmann
      • [PATCH v3 4/4] ARM: msm: Describe MSM 8660 SURF FPGA registers in DT   David Brown
      • [PATCH v3 4/4] ARM: msm: Describe MSM 8660 SURF FPGA registers in DT   Arnd Bergmann
      • [PATCH v3 4/4] ARM: msm: Describe MSM 8660 SURF FPGA registers in DT   David Brown
• [PATCH 0/5] ARM: davinci: introduce new board heliosv1   Ben Gardiner
  • [PATCH 4/5] ARM: davinci: da850, omapl138: share the davinci_uart_config   Ben Gardiner
    • [PATCH 4/5] ARM: davinci: da850, omapl138: share the davinci_uart_config   Felipe Balbi
  • [PATCH 5/5] ARM: davinci: da850, omapl138: introduce new board-omapl138-heliosv1   Ben Gardiner
    • [PATCH 5/5] ARM: davinci: da850, omapl138: introduce new board-omapl138-heliosv1   Felipe Balbi
• [PATCH 1/5] ARM: davinci: da850, omapl138: introduce shared da850 reference components   Ben Gardiner
  • [PATCH 1/5] ARM: davinci: da850, omapl138: introduce shared da850 reference components   Felipe Balbi
• [PATCH 2/5] ARM: davinci: da850, omapl138: share boot_params   Ben Gardiner
  • [PATCH 2/5] ARM: davinci: da850, omapl138: share boot_params   Felipe Balbi
• [PATCH 3/5] ARM: davinci: da850, omapl138: share the preferred console registration   Ben Gardiner
• [PATCH] ARM: mach-orion5x: add missing header file <video/vga.h>   Bryan Wu
• [PATCH 5/5] ARM: s3c64xx: Add support for synchronous clock operation.   Kukjin Kim
  • [PATCH 5/5] ARM: s3c64xx: Add support for synchronous clock operation.   Tomasz Figa
• enable two usb host on s3c2416 processor   GIGIN JOSE
  • enable two usb host on s3c2416 processor   Kukjin Kim
• [GIT PULL] Samsung S5P for v3.1 merge window   Tushar Behera
  • [GIT PULL] Samsung S5P for v3.1 merge window   Kukjin Kim
• [PATCH V6 00/15] To use DMA generic APIs for Samsung DMA   Boojin Kim
  • [PATCH v6 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC   Boojin Kim
  • [PATCH v6 02/15] DMA: PL330: Update PL330 DMA API driver   Boojin Kim
    • [PATCH v6 02/15] DMA: PL330: Update PL330 DMA API driver   Jassi Brar
  • [PATCH v6 03/15] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
    • [PATCH v6 03/15] DMA: PL330: Support DMA_SLAVE_CONFIG command   Jassi Brar
      • [PATCH v6 03/15] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
  • [PATCH v6 04/15] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
    • [PATCH v6 04/15] DMA: PL330: Add DMA_CYCLIC capability   Jassi Brar
      • [PATCH v6 04/15] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
      • [PATCH v6 04/15] DMA: PL330: Add DMA_CYCLIC capability   Jassi Brar
      • [PATCH v6 04/15] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
      • [PATCH v6 04/15] DMA: PL330: Add DMA_CYCLIC capability   Jassi Brar
      • [PATCH v6 04/15] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
  • [PATCH v6 05/15] ARM: SAMSUNG: Update to use PL330-DMA driver   Boojin Kim
  • [PATCH v6 06/15] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
  • [PATCH v6 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver   Boojin Kim
  • [PATCH v6 08/15] ARM: S5PV210: Use generic DMA PL330 driver   Boojin Kim
  • [PATCH v6 09/15] ARM: S5PC100: Use generic DMA PL330 driver   Boojin Kim
  • [PATCH v6 10/15] ARM: S5P64X0: Use generic DMA PL330 driver   Boojin Kim
  • [PATCH v6 11/15] ARM: SAMSUNG: Remove S3C-PL330-DMA driver   Boojin Kim
  • [PATCH v6 12/15] spi/s3c64xx: Add support DMA engine API   Boojin Kim
  • [PATCH v6 13/15] spi/s3c64xx: Merge dma control code   Boojin Kim
  • [PATCH v6 14/15] ASoC: Samsung: Update DMA interface   Boojin Kim
    • [PATCH v6 14/15] ASoC: Samsung: Update DMA interface   Jassi Brar
  • [PATCH v6 15/15] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction   Boojin Kim
• [PATCH 0/4 v4] pin controller subsystem v4   Linus Walleij
  • [PATCH 0/4 v4] pin controller subsystem v4   Barry Song
    • [PATCH 0/4 v4] pin controller subsystem v4   Linus Walleij
      • [PATCH 0/4 v4] pin controller subsystem v4   Barry Song
      • [PATCH 0/4 v4] pin controller subsystem v4   Linus Walleij
      • [PATCH 0/4 v4] pin controller subsystem v4   Stephen Warren
      • [PATCH 0/4 v4] pin controller subsystem v4   Linus Walleij
• [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
  • [PATCH 1/4 v4] drivers: create a pin control subsystem   Jamie Iles
    • [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Jamie Iles
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Jamie Iles
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Jamie Iles
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Arnd Bergmann
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Greg KH
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
  • [PATCH 1/4 v4] drivers: create a pin control subsystem   Barry Song
  • [PATCH 1/4 v4] drivers: create a pin control subsystem   Barry Song
    • [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
  • [PATCH 1/4 v4] drivers: create a pin control subsystem   Stephen Warren
    • [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Sascha Hauer
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Sascha Hauer
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   David Brown
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Gregory Bean
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Stephen Warren
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Stephen Warren
      • [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
  • [PATCH 1/4 v4] drivers: create a pin control subsystem   Barry Song
    • [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
• [PATCH 2/4 v4] pinmux: add a driver for the U300 pinmux   Linus Walleij
  • [PATCH 2/4 v4] pinmux: add a driver for the U300 pinmux   Barry Song
    • [PATCH 2/4 v4] pinmux: add a driver for the U300 pinmux   Linus Walleij
  • [PATCH 2/4 v4] pinmux: add a driver for the U300 pinmux   Barry Song
    • [PATCH 2/4 v4] pinmux: add a driver for the U300 pinmux   Linus Walleij
  • [PATCH 2/4 v4] pinmux: add a driver for the U300 pinmux   Barry Song
• [PATCH 3/4 v4] amba: request muxing for PrimeCell devices   Linus Walleij
• [PATCH 4/4 v4] mach-u300: activate pinmux driver, delete old padmux driver   Linus Walleij
• [PATCH 4/4 v2] ARM: s3c64xx: Add support for synchronous clock operation.   Tomasz Figa
• [PATCH 4/4 v3] ARM: s3c64xx: Add support for synchronous clock operation.   Tomasz Figa
• [PATCH] arm: exynos4: Add restart hook for proper reboot   Kyungmin Park
  • [PATCH] arm: exynos4: Add restart hook for proper reboot   Kukjin Kim
• [PATCH] ARM: S5P: fix bug in spdif_clk_get_rate   Naveen Krishna Chatradhi
  • [PATCH] ARM: S5P: fix bug in spdif_clk_get_rate   Kukjin Kim
• [PATCH] ARM: SAMSUNG: TSADC: Remove unnecessary duplication of plat_data   Naveen Krishna Chatradhi
  • [PATCH] ARM: SAMSUNG: TSADC: Remove unnecessary duplication of plat_data   Kukjin Kim
• [PATCH 0/3] AM35x: Adding PM init   Abhilash K V
• [PATCH 1/3] AM35x: voltage: Basic initialization   Abhilash K V
  • [PATCH 2/3] OMAP3: Add support for TPS65023 (AM35x only)   Abhilash K V
    • [PATCH 3/3] OMAP3: Remove auto-selection of PMICs   Abhilash K V
      • [PATCH 3/3] OMAP3: Remove auto-selection of PMICs   Samuel Ortiz
      • [PATCH 3/3] OMAP3: Remove auto-selection of PMICs   Premi, Sanjeev
  • [PATCH 1/3] AM35x: voltage: Basic initialization   Kevin Hilman
• [PATCH 0/2] AM3517EVM: Add support for MMC1   Abhilash K V
  • [PATCH 1/2] AM3517EVM: Add support for base-board MMC slot   Abhilash K V
    • [PATCH 2/2] AM3517: Support for MMC1   Abhilash K V
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Linus Walleij
• [PATCH 0/4] AM3517: Adding support for suspend/resume   Abhilash K V
  • [PATCH 1/4] AM3517 : support for suspend/resume   Abhilash K V
    • [PATCH 1/4] AM3517 : support for suspend/resume   Russell King - ARM Linux
    • [PATCH 1/4] AM3517 : support for suspend/resume   Kevin Hilman
• [PATCH 2/4] AM3517: Add armv7-a flag for sleepam3517.S   Abhilash K V
• [PATCH 3/4] pm34xx: Warning FIX related to ambiguous else loop   Abhilash K V
  • [PATCH 3/4] pm34xx: Warning FIX related to ambiguous else loop   Kevin Hilman
• [PATCH 4/4] AM3517: Fix suspend-resume sequence   Abhilash K V
  • [PATCH 4/4] AM3517: Fix suspend-resume sequence   Russell King - ARM Linux
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Linus Walleij
• [PATCH 2/2] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Linus Walleij
• Patch Merging Path - RMK or Arnd?   Will Deacon
  • Patch Merging Path - RMK or Arnd?   Arnd Bergmann
    • Patch Merging Path - RMK or Arnd?   Will Deacon
      • Patch Merging Path - RMK or Arnd?   Arnd Bergmann
      • Patch Merging Path - RMK or Arnd?   Will Deacon
      • Patch Merging Path - RMK or Arnd?   Russell King - ARM Linux
• [RFC PATCH 0/4] ARM: EXYNOS4: Use cpuidle common save/restore framework code   Amit Daniel Kachhap
  • [RFC PATCH 1/4] ARM: kernel: Small fixes in save/restore common code.   Amit Daniel Kachhap
    • [RFC PATCH 1/4] ARM: kernel: Small fixes in save/restore common code.   Amit Kucheria
      • [RFC PATCH 1/4] ARM: kernel: Small fixes in save/restore common code.   Lorenzo Pieralisi
  • [RFC PATCH 2/4] ARM: EXYNOS4: Fix to work with origen boards.   Amit Daniel Kachhap
    • [RFC PATCH 2/4] ARM: EXYNOS4: Fix to work with origen boards.   Kyungmin Park
      • [RFC PATCH 2/4] ARM: EXYNOS4: Fix to work with origen boards.   Amit Kachhap
  • [RFC PATCH 3/4] ARM: EXYNOS4: Add support AFTR mode cpuidle state on EXYNOS4210   Amit Daniel Kachhap
    • [RFC PATCH 3/4] ARM: EXYNOS4: Add support AFTR mode cpuidle state on EXYNOS4210   Russell King - ARM Linux
      • [RFC PATCH 3/4] ARM: EXYNOS4: Add support AFTR mode cpuidle state on EXYNOS4210   Amit Kachhap
  • [RFC PATCH 4/4] ARM: EXYNOS4: Modify cpuidle code to adapt to save/restore common code   Amit Daniel Kachhap
• [PATCH] ARM: EXYNOS4: Turn the mach-smdkc210.c into mach-smdv310.c   Kukjin Kim
• [PATCHv15 0/8] Contiguous Memory Allocator   Marek Szyprowski
  • [PATCH 5/8] mm: MIGRATE_CMA isolation functions added   Marek Szyprowski
  • [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
  • [PATCH 8/8] ARM: S5PV210: example of CMA private area for FIMC device on Goni board   Marek Szyprowski
• [PATCH 1/8] mm: move some functions from memory_hotplug.c to page_isolation.c   Marek Szyprowski
• [PATCH 2/8] mm: alloc_contig_freed_pages() added   Marek Szyprowski
• [PATCH 3/8] mm: alloc_contig_range() added   Marek Szyprowski
• [PATCH 4/8] mm: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCH 7/8] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [GIT PULL] Samsung Fixes for v3.1-rc3   Kukjin Kim
  • [GIT PULL] Samsung Fixes for v3.1-rc3   Kukjin Kim
    • [GIT PULL] Samsung Fixes for v3.1-rc3   Arnd Bergmann
  • [GIT PULL] Samsung Fixes for v3.1-rc3   Arnd Bergmann
• [PATCH RFC] ARM: vexpress: Use assembler mnemonic for WFI in platform_do_lowpower.   Nick Bowler
  • [PATCH RFC] ARM: vexpress: Use assembler mnemonic for WFI in platform_do_lowpower.   Jamie Iles
    • [PATCH RFC] ARM: vexpress: Use assembler mnemonic for WFI in platform_do_lowpower.   Nick Bowler
      • [PATCH RFC] ARM: vexpress: Use assembler mnemonic for WFI in platform_do_lowpower.   Jamie Iles
      • [PATCH RFC] ARM: vexpress: Use assembler mnemonic for WFI in platform_do_lowpower.   Catalin Marinas
      • [PATCH v2] ARM: vexpress: Use wfi macro in platform_do_lowpower.   Nick Bowler
      • [PATCH v2] ARM: vexpress: Use wfi macro in platform_do_lowpower.   Jamie Iles
      • [PATCH v2] ARM: vexpress: Use wfi macro in platform_do_lowpower.   Nick Bowler
• [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)   Paul Walmsley
  • [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)   Felipe Balbi
    • [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)   Paul Walmsley
      • [PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable sequence (was Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda)   Santosh
• ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Marek Vasut
  • ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Kukjin Kim
• [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
  • [RFC] Kbuild: allow code re-use across different directories   Cong Wang
  • [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
    • [RFC] Kbuild: allow code re-use across different directories   Nicolas Pitre
      • [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
• [PATCH] ARM: EXYNOS4: Fix wrong pll type for vpll   jhbird.choi at samsung.com
  • [PATCH] ARM: EXYNOS4: Fix wrong pll type for vpll   Kukjin Kim
• [PATCH] ARM: S5P: Remove duplicate kdiv calculation   jhbird.choi at samsung.com
  • [PATCH] ARM: S5P: Remove duplicate kdiv calculation   Kukjin Kim
• [PATCH 0/4] ARM: SAMSUNG: Add support CPU ID and Rev. at runtime   Kukjin Kim
  • [PATCH 1/4] ARM: SAMSUNG: Add support for detecting CPU at runtime   Kukjin Kim
    • [PATCH 1/4] ARM: SAMSUNG: Add support for detecting CPU at runtime   Russell King - ARM Linux
      • [PATCH 1/4] ARM: SAMSUNG: Add support for detecting CPU at runtime   Kukjin Kim
  • [PATCH 3/4] ARM: SAMSUNG: Add support for handling of cpu revision   Kukjin Kim
    • [PATCH 3/4] ARM: SAMSUNG: Add support for handling of cpu revision   Kukjin Kim
  • [PATCH 4/4] ARM: EXYNOS4: Use samsung_rev() to distinguish silicon revision   Kukjin Kim
    • [PATCH 4/4] ARM: EXYNOS4: Use samsung_rev() to distinguish silicon revision   Kukjin Kim
  • [PATCH 0/4] ARM: SAMSUNG: Add support CPU ID and Rev. at runtime   Kyungmin Park
• [PATCH 2/4] ARM: S5P64X0: Use cpu_is_s5p64x0() to distinguish cpu at runtime   Kukjin Kim
• [PATCH 0/4] S3C2416: Enable IIS and HSSPI clocks   Heiko Stübner
  • [PATCH 1/4] S3C2443: Move i2s clock definitions to common code   Heiko Stübner
    • [PATCH 1/4] S3C2443: Move i2s clock definitions to common code   Russell King - ARM Linux
      • [PATCH 1/4] S3C2443: Move i2s clock definitions to common code   Heiko Stübner
      • [PATCH 1/4] S3C2443: Move i2s clock definitions to common code   Marek Vasut
      • [PATCH 1/4] S3C2443: Move i2s clock definitions to common code   Heiko Stübner
      • [PATCH 1/4] S3C2443: Move i2s clock definitions to common code   Kukjin Kim
      • [PATCH 1/4] S3C2443: Move i2s clock definitions to common code   Heiko Stübner
  • [PATCH 2/4] S3C2443: Define constant for HSSPI pclk   Heiko Stübner
  • [PATCH 3/4] S3C2416: Add HSSPI clock sourced from EPLL   Heiko Stübner
  • [PATCH 4/4] S3C2443: Add hsspi-clock from pclk   Heiko Stübner
• [PATCH] ARM: mach-davinci: Select PHYLIB for ARCH_DAVINCI_DM644x   Axel Lin
• [PATCHv3 0/5] OMAP DSS HWMOD fixes   Paul Walmsley
  • [PATCH 1/5] OMAP2xxx: HWMOD: fix DSS opt clocks   Paul Walmsley
    • [PATCH 1/5] OMAP2xxx: HWMOD: fix DSS opt clocks   Tony Lindgren
  • [PATCH 3/5] OMAP4: HWMOD: fix DSS opt clocks   Paul Walmsley
  • [PATCH 4/5] OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss   Paul Walmsley
  • [PATCH 5/5] OMAP: HWMOD: Unify DSS resets for all OMAPs   Paul Walmsley
• [PATCH 2/5] OMAP3: HWMOD: fix DSS opt clocks   Paul Walmsley
• [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int   Paul Walmsley
• [PATCHv2 1/4] OMAP4: clockdata: Make compiler shut up about possible uninitialized variable   Paul Walmsley
• [PATCH 1/1] ASoC: mxs-saif: clear clk gate first before register setting   Dong Aisheng
  • [PATCH 1/1] ASoC: mxs-saif: clear clk gate first before register setting   Liam Girdwood
  • [PATCH 1/1] ASoC: mxs-saif: clear clk gate first before register setting   Mark Brown
• [PATCH 1/2] ASoC: mxs-saif: add record function   Dong Aisheng
  • [PATCH 1/2] ASoC: mxs-saif: add record function   Liam Girdwood
    • [PATCH 1/2] ASoC: mxs-saif: add record function   Dong Aisheng-B29396
  • [PATCH 1/2] ASoC: mxs-saif: add record function   Wolfram Sang
    • [PATCH 1/2] ASoC: mxs-saif: add record function   Dong Aisheng-B29396
• [PATCH 2/2] ASoC: mxs-sgtl5000: add record function   Dong Aisheng
  • [PATCH 2/2] ASoC: mxs-sgtl5000: add record function   Liam Girdwood
  • [PATCH 2/2] ASoC: mxs-sgtl5000: add record function   Mark Brown
• [PATCH 1/3] ARM: mx28evk: add platform data for saif   Dong Aisheng
• [PATCH 2/3] ARM: mx28evk: set a initial clock rate for saif   Dong Aisheng
• [PATCH 3/3] arm: mxs: disable clock-gates when setting saif-clocks   Dong Aisheng
  • [PATCH 3/3] arm: mxs: disable clock-gates when setting saif-clocks   Wolfram Sang
    • [alsa-devel] [PATCH 3/3] arm: mxs: disable clock-gates when setting saif-clocks   Dong Aisheng-B29396
      • [alsa-devel] [PATCH 3/3] arm: mxs: disable clock-gates when setting saif-clocks   Wolfram Sang
• [PATCH 1/2] ARM: orion5x: add missing header file <video/vga.h>   Rob Herring
• [PATCH 2/2] ARM: orion5x: fix build error in dns323_pci_map_irq   Rob Herring
  • [PATCH 2/2] ARM: orion5x: fix build error in dns323_pci_map_irq   Sergei Shtylyov
• [PATCH 0/4 v2] Miscellaneous s3c64xx fixes.   Tomasz Figa
• [PATCH 0/4 v2] Miscellaneous s3c64xx fixes.   Tomasz Figa
  • [PATCH 1/4 v2] ARM: s3c64xx: DMA: Use S3C64XX_SDMA_SEL register name instead of numeric address.   Tomasz Figa
  • [PATCH 2/4 v2] ARM: s3c64xx: Save/restore S3C64XX_SDMA_SEL on suspend/resume.   Tomasz Figa
  • [PATCH 3/4 v2] ARM: s3c64xx: Save/restore S3C64XX_MODEM_MIFPCON on suspend/resume to preserve LCD bypass state.   Tomasz Figa
  • [PATCH 4/4 v2] ARM: s3c64xx: Add support for synchronous clock operation.   Tomasz Figa
    • [PATCH 4/4 v2] ARM: s3c64xx: Add support for synchronous clock operation.   Kukjin Kim
      • [PATCH 4/4 v3] ARM: s3c64xx: Add support for synchronous clock operation.   Tomasz Figa
      • [PATCH 4/4 v3] ARM: s3c64xx: Add support for synchronous clock operation.   Kukjin Kim
• Git pull request: boot_params -> atag_offset conversion   Nicolas Pitre
• [PATCH v4] amba: consolidate PrimeCell magic   Boojin Kim
  • [PATCH v4] amba: consolidate PrimeCell magic   Linus Walleij
    • [PATCH v4] amba: consolidate PrimeCell magic   Boojin Kim
      • [PATCH v4] amba: consolidate PrimeCell magic   Linus Walleij
• [PATCH] DMA: PL330: Merge PL330 drivers   Boojin Kim
  • [PATCH] DMA: PL330: Merge PL330 drivers   Jassi Brar
• [PATCH] mtd: mxc_nand: Add mx53 NFC driver support   Jason Liu
  • [PATCH] mtd: mxc_nand: Add mx53 NFC driver support   Artem Bityutskiy
• at91sam9g45: Issues while working with RAM that is separated on physical address space   Prasant J
• 46dcfc8 (ARM: Update mach-types) removes used machine types   Uwe Kleine-König
  • 46dcfc8 (ARM: Update mach-types) removes used machine types   Russell King - ARM Linux
    • 46dcfc8 (ARM: Update mach-types) removes used machine types   Uwe Kleine-König
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Marek Vasut
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Russell King - ARM Linux
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Marek Vasut
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Russell King - ARM Linux
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Russell King - ARM Linux
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Marek Vasut
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Russell King - ARM Linux
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Marek Vasut
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Russell King - ARM Linux
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Marek Vasut
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Russell King - ARM Linux
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Eric Miao
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Eric Bénard
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Russell King - ARM Linux
      • [PATCH] cpuimx* boards: fix mach-types errors   Eric Bénard
      • [PATCH] cpuimx* boards: fix mach-types errors   Russell King - ARM Linux
      • [PATCH] cpuimx* boards: fix mach-types errors   Eric Bénard
      • 46dcfc8 (ARM: Update mach-types) removes used machine types   Russell King - ARM Linux
• [PATCH] OMAP2+: Add a common method to init globals using DT compatible   Benoit Cousson
• USB host on s3c2416   GIGIN JOSE
  • USB host on s3c2416   Thomas Abraham
• ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Sascha Hauer
  • ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Jean-Christophe PLAGNIOL-VILLARD
  • ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Igor Grinberg
• [PATCH 0/2] Consolidate and clean up the arch/arm/mach-mx5/mm-*.c   Jason Liu
  • [PATCH 1/2] ARM: i.MX5/mm: Consolidate arch/arm/mach-mx5/mm-*.c   Jason Liu
  • [PATCH 2/2] ARM: i.MX5/mm: use static mapping for TZIC   Jason Liu
    • [PATCH 2/2] ARM: i.MX5/mm: use static mapping for TZIC   Uwe Kleine-König
      • [PATCH 2/2] ARM: i.MX5/mm: use static mapping for TZIC   Jason Hui
  • [PATCH 0/2] Consolidate and clean up the arch/arm/mach-mx5/mm-*.c   Jason Liu
    • [PATCH 0/2] Consolidate and clean up the arch/arm/mach-mx5/mm-*.c   Robert Schwebel
• [PATCH v2 1/2] ASoC: mxs-saif: add record function   Dong Aisheng
  • [PATCH v2 2/2] ASoC: mxs-sgtl5000: add record function   Dong Aisheng
• [PATCH 0/3 v3] ARM Realview PCIX preparation   Colin Tuckley
  • [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Colin Tuckley
  • [PATCH 2/3 v3] ARM Realview PCIX IRQ include file changes   Colin Tuckley
  • [PATCH 3/3 v3] RM Realview PCIX board file changes   Colin Tuckley
• [PATCH v2 0/4] Fixes to twl4030-madc and add BeagleBoard support   Samuel Ortiz
• [RFC][PATCH 0/1 v4] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
  • [RFC][PATCH 1/1 v4] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
    • [RFC][PATCH 1/1 v4] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Will Deacon
• [PATCH 0/7] OMAP: omap_device cleanup before device-tree integration   Benoit Cousson
  • [PATCH 1/7] OMAP: PM: omap_device: add omap_hwmod_name_get_odev   Benoit Cousson
    • [PATCH 1/7] OMAP: PM: omap_device: add omap_hwmod_name_get_odev   Kevin Hilman
  • [PATCH 2/7] OMAP: PM: omap_device: add few quick access functions   Benoit Cousson
    • [PATCH 2/7] OMAP: PM: omap_device: add few quick access functions   Kevin Hilman
  • [PATCH 3/7] OMAP3: beagle-board: Use the omap_hwmod_name_get_dev API   Benoit Cousson
    • [PATCH 3/7] OMAP3: beagle-board: Use the omap_hwmod_name_get_dev API   Kevin Hilman
  • [PATCH 4/7] OMAP2+: pm: Use hwmod name instead of dev pointer   Benoit Cousson
    • [PATCH 4/7] OMAP2+: pm: Use hwmod name instead of dev pointer   Kevin Hilman
  • [PATCH 5/7] OMAP2+: pm: Remove static devices variable for mpu, dsp, iva and l3 PM   Benoit Cousson
    • [PATCH 5/7] OMAP2+: pm: Remove static devices variable for mpu, dsp, iva and l3 PM   Kevin Hilman
  • [PATCH 6/7] OMAP: omap_device: Create a default omap_device_pm_latency   Benoit Cousson
    • [PATCH 6/7] OMAP: omap_device: Create a default omap_device_pm_latency   Kevin Hilman
  • [PATCH 7/7] OMAP2+: devices: Remove all omap_device_pm_latency structures   Benoit Cousson
    • [PATCH 7/7] OMAP2+: devices: Remove all omap_device_pm_latency structures   Kevin Hilman
• [PATCH 1/2] ARM: mx25: Add iim clock support   Fabio Estevam
  • [PATCH 2/2] ARM: mx25: Print silicon revision on boot   Fabio Estevam
• [PATCH] ARM: mx27: Print silicon revision on boot   Fabio Estevam
  • [PATCH] ARM: mx27: Print silicon revision on boot   Marek Vasut
    • [PATCH] ARM: mx27: Print silicon revision on boot   Fabio Estevam
      • [PATCH] ARM: mx27: Print silicon revision on boot   Marek Vasut
      • [PATCH] ARM: mx27: Print silicon revision on boot   Sascha Hauer
      • [PATCH] ARM: mx27: Print silicon revision on boot   Marek Vasut
• Passing camera module type using "camera" argument.   Koen Kooi
• [GIT PULL] ARM: Remove define CONSISTENT_DMA_SIZE   Tixy
• [PATCH v2 1/2] ARM: imx: Introduce generic function for displaying silicon revision   Fabio Estevam
  • [PATCH v2 2/2] ARM: mx27: Print silicon revision on boot   Fabio Estevam
  • [PATCH v2 1/2] ARM: imx: Introduce generic function for displaying silicon revision   Sascha Hauer
    • [PATCH v2 1/2] ARM: imx: Introduce generic function for displaying silicon revision   Jason Liu
• [RFC PATCH 0/3] OMAP: omap_device: Add a method to build an omap_device from a DT node   Benoit Cousson
• [RFC PATCH 0/3] OMAP: omap_device: Add a method to build an omap_device from a DT node   Benoit Cousson
  • [RFC PATCH 1/3] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Benoit Cousson
  • [RFC PATCH 2/3] OMAP: omap_device: Add a DT parser for multiple strings   Benoit Cousson
  • [RFC PATCH 3/3] OMAP: omap_device: Add a method to build an omap_device from a DT node   Benoit Cousson
    • [RFC PATCH 3/3] OMAP: omap_device: Add a method to build an omap_device from a DT node   Cousson, Benoit
• [RFC PATCH 05/15] ARM: perf: move active_events into struct arm_pmu   Ashwin Chaugule
  • [RFC PATCH 05/15] ARM: perf: move active_events into struct arm_pmu   Will Deacon
• [RFC PATCH 08/15] ARM: perf: remove unnecessary armpmu->stop   Ashwin Chaugule
  • [RFC PATCH 08/15] ARM: perf: remove unnecessary armpmu->stop   Will Deacon
• [RFC PATCH 00/15] ARM: perf: support multiple PMUs   Ashwin Chaugule
  • [RFC PATCH 00/15] ARM: perf: support multiple PMUs   Will Deacon
• [RESEND][PATCH 0/3] dma: pl330: Simplify platform data for pl330 driver   Thomas Abraham
  • [PATCH 1/3] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
    • [PATCH 1/3] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Boojin Kim
      • [PATCH 1/3] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
      • [PATCH 1/3] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Boojin Kim
    • [PATCH 1/3] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Rob Herring
      • [PATCH 1/3] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH 2/3] ARM: SAMSUNG: Modify pl330 channel filter function   Thomas Abraham
  • [PATCH 2/3] ARM: SAMSUNG: Modify pl330 channel filter function   Russell King - ARM Linux
    • [PATCH 2/3] ARM: SAMSUNG: Modify pl330 channel filter function   Thomas Abraham
  • [PATCH 3/3] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain   Paul Walmsley
• error: implicit declaration of function 'machine_is_ventana'   Stephen Warren
  • error: implicit declaration of function 'machine_is_ventana'   Russell King - ARM Linux
    • error: implicit declaration of function 'machine_is_ventana'   Stephen Warren
      • error: implicit declaration of function 'machine_is_ventana'   Russell King - ARM Linux
      • error: implicit declaration of function 'machine_is_ventana'   Stephen Warren
      • error: implicit declaration of function 'machine_is_ventana'   Russell King - ARM Linux
• [PATCH] irq: always set IRQF_ONESHOT if no primary handler is specified   Paul Walmsley
• [PATCH V2 1/4] ARM: SAMSUNG: Add support for detecting CPU at runtime   Kukjin Kim
• [PATCH V2 2/4] ARM: S5P64X0: Use soc_is_s5p64x0() to distinguish cpu at runtime   Kukjin Kim
• [PATCH] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain   Paul Walmsley
• [GIT PULL] OMAP: clock/powerdomain/clockdomain/hwmod: fixes for 3.1-rc   Paul Walmsley
• [PATCH v2 0/4] ARM: CSR: add rtciobrg and PM support   Barry Song
  • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
    • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Jamie Iles
      • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
    • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Russell King - ARM Linux
      • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
    • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Shawn Guo
      • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
      • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Shawn Guo
      • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
      • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
      • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Arnd Bergmann
      • [PATCH v2 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
  • [PATCH v2 4/4] ARM: CSR: add PM suspend/resume entries for SiRFprimaII L2 cache   Barry Song
• [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Barry Song
  • [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Jamie Iles
    • [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Barry Song
      • [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Jamie Iles
      • [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Arnd Bergmann
      • [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Barry Song
  • [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Arnd Bergmann
    • [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Arnd Bergmann
      • [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Barry Song
    • [PATCH v2 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Barry Song
• [PATCH v2 3/4] ARM: L2X0: move l2x0_init out of .init section   Barry Song
• [PATCH 1/5] OMAP2xxx: HWMOD: fix DSS opt clocks   Tony Lindgren
• [PATCH 1/5] OMAP2xxx: HWMOD: fix DSS opt clocks   Paul Walmsley
• [PATCH] plat-nomadik: kill off <plat/gpio.h>   Linus Walleij
• [PATCH] mach-pnx4008: rename GPIO header   Linus Walleij
  • [PATCH] mach-pnx4008: rename GPIO header   Vitaly Wool
• [RFC/PATCH v2 09/13] dt: omap4: add soc file for handling i2c controllers   Rajendra Nayak
  • [RFC/PATCH v2 09/13] dt: omap4: add soc file for handling i2c controllers   G, Manjunath Kondaiah
• [RFC/PATCH v2 07/13] dt: omap: create platform bus for omap devices   Jamie Iles
  • [RFC/PATCH v2 07/13] dt: omap: create platform bus for omap devices   G, Manjunath Kondaiah
• [PATCH 3/4] mmci: sync DATAEND irq with dma|pio transfer done   Ulf Hansson
• [PATCH 0/2] Add runtime PM support to Primecell bus   Russell King - ARM Linux
  • [PATCH 1/2] PM: add runtime PM support to core Primecell driver   Russell King - ARM Linux
    • [PATCH 1/2] PM: add runtime PM support to core Primecell driver   Rafael J. Wysocki
    • [PATCH] spi: Fix builderror in spi-pl022.c   Peter Huewe
      • [PATCH] spi: Fix builderror in spi-pl022.c   Russell King - ARM Linux
      • [PATCH] spi: Fix builderror in spi-pl022.c   Linus Walleij
  • [PATCH 2/2] PM: add runtime PM support to MMCI   Russell King - ARM Linux
• Passing camera module type using "camera" argument.   Laurent Pinchart
• [PATCH] Optimize multi-CPU tlb flushing a little more   Russell King - ARM Linux
• [PATCH 1/2] arm: mach-bcmring: fix build error in core.c   Maxin B. John
  • [PATCH 1/2] arm: mach-bcmring: fix build error in core.c   Jiandong Zheng
    • [PATCH 1/2] arm: mach-bcmring: fix build error in core.c   Russell King - ARM Linux
      • [PATCH 1/2] arm: mach-bcmring: fix build error in core.c   Jiandong Zheng
• [PATCH 2/2] arm: mach-bcmring: fix build error in dma.c   Maxin B John
  • [PATCH 2/2] arm: mach-bcmring: fix build error in dma.c   Jiandong Zheng
    • [PATCH 2/2] arm: mach-bcmring: fix build error in dma.c   Maxin B John
      • [PATCH 2/2] arm: mach-bcmring: fix build error in dma.c   Jiandong Zheng
• [PATCH] ARM: i.MX5/mm: use static mapping for TZIC   Jason Liu
• [GIT PULL] i.MX cleanups for next   Sascha Hauer
  • [GIT PULL] i.MX cleanups for next   Sascha Hauer
    • [GIT PULL] i.MX cleanups for next   Arnd Bergmann
    • [GIT PULL] i.MX cleanups for next   Arnd Bergmann
      • [GIT PULL] i.MX cleanups for next   Sascha Hauer
      • [GIT PULL] i.MX cleanups for next   Arnd Bergmann
• [GIT PULL] i.MX features for next   Sascha Hauer
  • [GIT PULL] i.MX features for next   Sascha Hauer
    • [GIT PULL] i.MX features for next   Arnd Bergmann
• [PATCH 0/9] OMAP: HWMOD: DSS patches   Tomi Valkeinen
  • [PATCH 3/9] OMAP3: HWMOD: Fix DSS reset   Tomi Valkeinen
  • [PATCH 4/9] OMAP3: HWMOD: fix DSS clock data   Tomi Valkeinen
  • [PATCH 5/9] OMAP4: HWMOD: remove extra clocks   Tomi Valkeinen
  • [PATCH 6/9] OMAP4: HWMOD: Add HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core   Tomi Valkeinen
  • [PATCH 7/9] OMAP4: HWMOD: fix DSS clock data   Tomi Valkeinen
  • [PATCH 8/9] OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss   Tomi Valkeinen
  • [PATCH 9/9] OMAP: HWMOD: Unify DSS resets for OMAPs   Tomi Valkeinen
  • [PATCH 0/9] OMAP: HWMOD: DSS patches   Paul Walmsley
• [PATCH 1/9] OMAP2xxx: HWMOD: Fix DSS reset   Tomi Valkeinen
• [PATCH 2/9] OMAP2xxx: HWMOD: fix DSS clock data   Tomi Valkeinen
• [RFC/PATCH v2 00/13] dt: omap: dt binding with omap_device and support for i2c1   Cousson, Benoit
• Fwd: [RFC/PATCH v2 11/13] dt: omap4: add generic board file for dt support   Cousson, Benoit
  • Fwd: [RFC/PATCH v2 11/13] dt: omap4: add generic board file for dt support   G, Manjunath Kondaiah
• [PATCH 0/6] imx soc revision clean up   Jason Liu
  • [PATCH 1/6] ARM: imx: Introduce generic function for displaying silicon revision   Jason Liu
    • [PATCH 1/6] ARM: imx: Introduce generic function for displaying silicon revision   Sascha Hauer
      • [PATCH 1/6] ARM: imx: Introduce generic function for displaying silicon revision   Jason Liu
  • [PATCH 2/6] ARM: mx25: Print silicon revision on boot   Jason Liu
  • [PATCH 3/6] ARM: mx27: Print silicon revision on boot   Jason Liu
  • [PATCH 4/6] ARM: mx31: use generic function for displaying silicon revision   Jason Liu
    • [PATCH 4/6] ARM: mx31: use generic function for displaying silicon revision   Sascha Hauer
      • [PATCH 4/6] ARM: mx31: use generic function for displaying silicon revision   Jason Liu
  • [PATCH 5/6] ARM: mx35: use generic function for displaying silicon revision   Jason Liu
  • [PATCH 6/6] ARM: mx5: use generic function for displaying silicon revision   Jason Liu
• [PATCH v2 0/2] AM3517: Booting up   Abhilash K V
• [PATCH v2 1/2] AM35x: Using OMAP3 generic hwmods   Abhilash K V
• [PATCH v2 2/2] omap_twl: Prevent SR to enable for am3517/am3505 devices   Abhilash K V
  • [PATCH v2 2/2] omap_twl: Prevent SR to enable for am3517/am3505devices   Vishwanath Sripathy
    • [PATCH v2 2/2] omap_twl: Prevent SR to enable for am3517/am3505devices   Premi, Sanjeev
  • [PATCH v2 2/2] omap_twl: Prevent SR to enable for am3517/am3505 devices   Matthieu CASTET
• Fwd: [RFC/PATCH v2 09/13] dt: omap4: add soc file for handling i2c controllers   Cousson, Benoit
  • Fwd: [RFC/PATCH v2 09/13] dt: omap4: add soc file for handling i2c controllers   G, Manjunath Kondaiah
    • Fwd: [RFC/PATCH v2 09/13] dt: omap4: add soc file for handling i2c controllers   Cousson, Benoit
• [PATCH] at91sam9261: fix typo in t2_clk alias for atmel_tcb.0   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] at91sam9261: fix typo in t2_clk alias for atmel_tcb.0   Remy Bohmer
    • [PATCH] at91sam9261: fix typo in t2_clk alias for atmel_tcb.0   Nicolas Ferre
• ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
  • ARM processor mode, kernel startup, Hyp / secure state   Russell King - ARM Linux
    • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Russell King - ARM Linux
      • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Nicolas Pitre
  • ARM processor mode, kernel startup, Hyp / secure state   Dave Martin
    • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Dave Martin
    • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Russell King - ARM Linux
      • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Nicolas Pitre
    • ARM processor mode, kernel startup, Hyp / secure state   Will Deacon
      • ARM processor mode, kernel startup, Hyp / secure state   Dave Martin
  • ARM processor mode, kernel startup, Hyp / secure state   Catalin Marinas
    • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Catalin Marinas
      • ARM processor mode, kernel startup, Hyp / secure state   Will Deacon
      • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Will Deacon
      • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Will Deacon
      • ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
      • ARM processor mode, kernel startup, Hyp / secure state   Will Deacon
      • ARM processor mode, kernel startup, Hyp / secure state   Russell King - ARM Linux
      • ARM processor mode, kernel startup, Hyp / secure state   Will Deacon
      • ARM processor mode, kernel startup, Hyp / secure state   Dave Martin
    • ARM processor mode, kernel startup, Hyp / secure state   Russell King - ARM Linux
      • ARM processor mode, kernel startup, Hyp / secure state   Linus Walleij
      • ARM processor mode, kernel startup, Hyp / secure state   Martin HOVANG
• try_to_freeze() called with IRQs disabled on ARM   Mark Brown
  • try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
    • try_to_freeze() called with IRQs disabled on ARM   Rafael J. Wysocki
  • try_to_freeze() called with IRQs disabled on ARM   Rafael J. Wysocki
    • try_to_freeze() called with IRQs disabled on ARM   Tejun Heo
      • try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
      • try_to_freeze() called with IRQs disabled on ARM   Tejun Heo
      • try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
      • try_to_freeze() called with IRQs disabled on ARM   Tejun Heo
      • try_to_freeze() called with IRQs disabled on ARM   Tejun Heo
      • try_to_freeze() called with IRQs disabled on ARM   Rafael J. Wysocki
      • try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
      • try_to_freeze() called with IRQs disabled on ARM   Tejun Heo
      • try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
      • try_to_freeze() called with IRQs disabled on ARM   Tejun Heo
      • try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
      • try_to_freeze() called with IRQs disabled on ARM   Tejun Heo
      • try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
      • try_to_freeze() called with IRQs disabled on ARM   Arnd Bergmann
      • try_to_freeze() called with IRQs disabled on ARM   Mark Brown
      • try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
      • try_to_freeze() called with IRQs disabled on ARM   Rafael J. Wysocki
    • try_to_freeze() called with IRQs disabled on ARM   Mark Brown
• [RFC/PATCH v2 00/13] dt: omap: dt binding with omap_device and support for i2c1   G, Manjunath Kondaiah
  • [RFC/PATCH v2 00/13] dt: omap: dt binding with omap_device and support for i2c1   Cousson, Benoit
• [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller   G, Manjunath Kondaiah
• ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   David Brown
• [RFC][PATCH 0/1 v1] Using Thread Notifiers to Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
  • [RFC][PATCH 1/1 v1] Using Thread Notifiers to Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
• [PATCH] ARM: imx: pwm: Add support for MX53   Fabio Estevam
  • [PATCH] ARM: imx: pwm: Add support for MX53   Sascha Hauer
  • [PATCH] ARM: imx: pwm: Add support for MX53   Uwe Kleine-König
    • [PATCH] ARM: imx: pwm: Add support for MX53   Lothar Waßmann
• v6 software reset fails on 1176   Jamie Iles
  • v6 software reset fails on 1176   Will Deacon
    • v6 software reset fails on 1176   Jamie Iles
      • v6 software reset fails on 1176   Will Deacon
      • v6 software reset fails on 1176   Jamie Iles
      • v6 software reset fails on 1176   Will Deacon
      • v6 software reset fails on 1176   Jamie Iles
• [Android-virt] ARM processor mode, kernel startup, Hyp / secure state   Ian Jackson
• [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data   Hemant Pedanekar
  • [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data   Paul Walmsley
• [RFC PATCH v2 1/6] TI816X: prcm: Add module and register offsets   Hemant Pedanekar
• [RFC PATCH v2 2/6] TI816X: clock: Add clock data   Hemant Pedanekar
• [RFC PATCH v2 3/6] TI816X: clock: Add clockdomains and powerdomains data   Hemant Pedanekar
• [RFC PATCH v2 4/6] clock: Integrate TI816X clock data into OMAP clock framework   Hemant Pedanekar
• [RFC PATCH v2 5/6] TI81XX: Add minimal hwmod data   Hemant Pedanekar
  • [RFC PATCH v2 5/6] TI81XX: Add minimal hwmod data   Kevin Hilman
• [RFC PATCH v2 6/6] hwmods: Integrate TI81XX hwmods   Hemant Pedanekar
• [PATCH] ASoC: Tegra: wm8903 machine driver: Drop Ventana support   Stephen Warren
  • [PATCH] ASoC: Tegra: wm8903 machine driver: Drop Ventana support   Liam Girdwood
  • [PATCH] ASoC: Tegra: wm8903 machine driver: Drop Ventana support   Mark Brown
• [PATCH 0/6] mmc: msm_sdcc Various fixes.   David Brown
  • [PATCH 3/6] msm: mmc: Remove "pio_irq" resource   David Brown
• [PATCH 1/2] sdhci/tegra: Add Device Tree probing support   Stephen Warren
  • [PATCH 1/2] sdhci/tegra: Add Device Tree probing support   Chris Ball
  • [PATCH 1/2] sdhci/tegra: Add Device Tree probing support   Olof Johansson
  • [PATCH 1/2] sdhci/tegra: Add Device Tree probing support   Shawn Guo
    • [PATCH 1/2] sdhci/tegra: Add Device Tree probing support   Stephen Warren
      • [PATCH 1/2] sdhci/tegra: Add Device Tree probing support   Shawn Guo
  • [PATCH 1/2] sdhci/tegra: Add Device Tree probing support   Marc Dietich
    • [PATCH 1/2] sdhci/tegra: Add Device Tree probing support   Stephen Warren
• [PATCH 2/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Stephen Warren
  • [PATCH 2/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Olof Johansson
• Tegra I2C driver compilation failure (was: RE: [PATCH] dt: add empty of_get_property for non-dt)   Stephen Warren
• [RFC/PATCH v2 10/13] dt: omap4: panda board: set clock freq for i2c devices   Cousson, Benoit
  • [RFC/PATCH v2 10/13] dt: omap4: panda board: set clock freq for i2c devices   G, Manjunath Kondaiah
• Fwd: [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller   Cousson, Benoit
• [PATCH 1/2] ARM: imx: Add PATA resources for other i.MX processors   Fabio Estevam
  • [PATCH 2/2] ARM: imx: Add PATA clock support   Fabio Estevam
  • [PATCH 1/2] ARM: imx: Add PATA resources for other i.MX processors   Sascha Hauer
• [PATCH v2 0/5] Convert DEBUG_LL UART selection to a Kconfig choice   Will Deacon
  • [PATCH v2 1/5] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Will Deacon
  • [PATCH v2 2/5] ARM: debug: augment DEBUG_LL Kconfig help to clarify behaviour   Will Deacon
  • [PATCH v2 3/5] ARM: plat-samsung: use Kconfig choice for debug UART selection   Will Deacon
  • [PATCH v2 4/5] ARM: realview: use Kconfig choice for debug UART selection   Will Deacon
  • [PATCH v2 5/5] arm/imx: use Kconfig choice for low-level debug UART selection   Will Deacon
• [PATCH v4 0/8] MMU disabling code and kexec fixes   Will Deacon
  • [PATCH v4 2/8] ARM: kexec: ensure new kernel is entered in ARM state   Will Deacon
    • [PATCH v4 2/8] ARM: kexec: ensure new kernel is entered in ARM state   Nicolas Pitre
      • [PATCH v4 2/8] ARM: kexec: ensure new kernel is entered in ARM state   Dave Martin
      • [PATCH v4 2/8] ARM: kexec: ensure new kernel is entered in ARM state   Will Deacon
    • [PATCH v4 2/8] ARM: kexec: ensure new kernel is entered in ARM state   Dave Martin
  • [PATCH v4 3/8] ARM: lib: add switch_stack function for safely changing stack   Will Deacon
    • [PATCH v4 3/8] ARM: lib: add switch_stack function for safely changing stack   Nicolas Pitre
      • [PATCH v4 3/8] ARM: lib: add switch_stack function for safely changing stack   Dave Martin
      • [PATCH v4 3/8] ARM: lib: add switch_stack function for safely changing stack   Will Deacon
  • [PATCH v4 4/8] ARM: idmap: add header file for identity mapping functions   Will Deacon
  • [PATCH v4 7/8] ARM: kexec: use arm_machine_reset for branching to the reboot buffer   Will Deacon
  • [PATCH v4 0/8] MMU disabling code and kexec fixes   Nicolas Pitre
    • [PATCH v4 0/8] MMU disabling code and kexec fixes   Will Deacon
      • [PATCH v4 0/8] MMU disabling code and kexec fixes   Nicolas Pitre
      • [PATCH v4 0/8] MMU disabling code and kexec fixes   Will Deacon
      • [PATCH v4 0/8] MMU disabling code and kexec fixes   Nicolas Pitre
      • [PATCH v4 0/8] MMU disabling code and kexec fixes   Will Deacon
      • [PATCH v4 0/8] MMU disabling code and kexec fixes   Will Deacon
  • [PATCH v4 0/8] MMU disabling code and kexec fixes   Jamie Iles
    • [PATCH v4 0/8] MMU disabling code and kexec fixes   Will Deacon
      • [PATCH v4 0/8] MMU disabling code and kexec fixes   Jamie Iles
• [PATCH v4 1/8] ARM: proc-v7: disable SCTLR.TE when disabling MMU   Will Deacon
  • [PATCH v4 1/8] ARM: proc-v7: disable SCTLR.TE when disabling MMU   Dave Martin
    • [PATCH v4 1/8] ARM: proc-v7: disable SCTLR.TE when disabling MMU   Will Deacon
      • [PATCH v4 1/8] ARM: proc-v7: disable SCTLR.TE when disabling MMU   Dave Martin
• [PATCH v4 5/8] ARM: reset: allow kernelspace mappings to be flat mapped during reset   Will Deacon
• [PATCH v4 6/8] ARM: reset: add reset functionality for jumping to a physical address   Will Deacon
• [PATCH v4 8/8] ARM: stop: execute platform callback from cpu_stop code   Will Deacon
• [GIT PULL] I2C: OMAP: major cleanup for v3.2 (was for v3.1)   Kevin Hilman
  • [GIT PULL] I2C: OMAP: major cleanup for v3.2 (was for v3.1)   Ben Dooks
• [GIT PULL] I2C: OMAP: misc. fixes for v3.2   Kevin Hilman
• [GIT PULL] I2C: OMAP: misc. cleanup for v3.2   Kevin Hilman
• [PATCH 1/2] ARM: L2X0: add explicit cpu_relax() for busy wait loop   Barry Song
  • [PATCH 1/2] ARM: L2X0: add explicit cpu_relax() for busy wait loop   Arnd Bergmann
  • [PATCH 1/2] ARM: L2X0: add explicit cpu_relax() for busy wait loop   Jamie Iles
• [PATCH 2/2] ARM: mach-ux500: add explicit cpu_relax() for busy wait loop   Barry Song
  • [PATCH 2/2] ARM: mach-ux500: add explicit cpu_relax() for busy wait loop   Arnd Bergmann
• [[PATCH v2 0/6] imx soc revision clean up   Jason Liu
  • [[PATCH v2 1/6] ARM: imx: Introduce generic function for displaying silicon revision   Jason Liu
  • [[PATCH v2 2/6] ARM: mx25: Print silicon revision on boot   Jason Liu
  • [[PATCH v2 3/6] ARM: mx27: Print silicon revision on boot   Jason Liu
  • [[PATCH v2 4/6] ARM: mx31: use generic function for displaying silicon revision   Jason Liu
    • [[PATCH v2 4/6] ARM: mx31: use generic function for displaying silicon revision   Fabio Estevam
      • [[PATCH v2 4/6] ARM: mx31: use generic function for displaying silicon revision   Jason Hui
  • [[PATCH v2 5/6] ARM: mx35: use generic function for displaying silicon revision   Jason Liu
  • [[PATCH v2 6/6] ARM: mx5: use generic function for displaying silicon revision   Jason Liu
    • [[PATCH v2 6/6] ARM: mx5: use generic function for displaying silicon revision   Sascha Hauer
      • [[PATCH v2 6/6] ARM: mx5: use generic function for displaying silicon revision   Fabio Estevam
  • [[PATCH v2 0/6] imx soc revision clean up   Sascha Hauer
    • [[PATCH v2 0/6] imx soc revision clean up   Jason Hui
• Issues with atmel-mci when using SDHC (Linux 3.0.3)   Prasant J
• [PATCH] media i.MX27 camera: remove legacy dma support   Sascha Hauer
  • [PATCH] media i.MX27 camera: remove legacy dma support   Guennadi Liakhovetski
    • [PATCH] media i.MX27 camera: remove legacy dma support   Sascha Hauer
    • [PATCH] media i.MX27 camera: remove legacy dma support   Baruch Siach
• remove several ARCH_MX* macros   Sascha Hauer
  • [PATCH 1/5] mmc i.MX: remove individual SoC dependency   Sascha Hauer
    • [PATCH 1/5] mmc i.MX: remove individual SoC dependency   Chris Ball
  • [PATCH 2/5] dma i.MX: remove individual SOC dependency   Sascha Hauer
  • [PATCH 3/5] USB host i.MX21: remove dependency on MACH_MX21   Sascha Hauer
  • [PATCH 4/5] USB gadget i.MX1: remove dependency on ARCH_MXC   Sascha Hauer
  • [PATCH 5/5] media i.MX1 camera: remove dependency on ARCH_MX1   Sascha Hauer
• [PATCH] ARM: ux500: send cpufreq notification for all cpus   Vincent Guittot
  • [PATCH] ARM: ux500: send cpufreq notification for all cpus   Linus Walleij
    • [PATCH] ARM: ux500: send cpufreq notification for all cpus   Kyungmin Park
      • [PATCH] ARM: ux500: send cpufreq notification for all cpus   Vincent Guittot
  • [PATCH] ARM: ux500: send cpufreq notification for all cpus   Santosh
    • [PATCH] ARM: ux500: send cpufreq notification for all cpus   Vincent Guittot
• remove several ARCH_MX* macros from arch/arm   Sascha Hauer
• [PATCH 1/2] ARM i.MX: remove ARCH_MX* macros from Makefile   Sascha Hauer
• [PATCH 2/2] ARM i.MX audmux v2: remove unnecessary ifdefs   Sascha Hauer
• [PATCH v8 0/4] add the GPMI-NAND support for imx23/imx28   Huang Shijie
  • [PATCH v8 2/4] ARM: mxs: add new a pad control   Huang Shijie
  • [PATCH v8 0/4] add the GPMI-NAND support for imx23/imx28   Artem Bityutskiy
    • [PATCH v8 0/4] add the GPMI-NAND support for imx23/imx28   Huang Shijie
      • [PATCH v8 0/4] add the GPMI-NAND support for imx23/imx28   Koen Beel
• [PATCH v8 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28   Huang Shijie
• [PATCH v8 3/4] ARM: mxs/mx23evk: add GPMI-NAND device   Huang Shijie
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Huang Shijie
• [PATCH] ARM: EXYNOS4: Fix return type of local_timer_setup()   Kukjin Kim
• [PATCH v10 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
  • [PATCH v10 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
    • [PATCH v10 1/3] MTD : add the common code for GPMI-NAND controller driver   Marek Vasut
  • [PATCH v10 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Huang Shijie
    • [PATCH v10 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Marek Vasut
  • [PATCH v10 3/3] MTD : add GPMI-NAND driver in the config and Makefile   Huang Shijie
    • [PATCH v10 3/3] MTD : add GPMI-NAND driver in the config and Makefile   Marek Vasut
  • [PATCH v10 0/3] add the GPMI controller driver for IMX23/IMX28   Artem Bityutskiy
    • [PATCH v10 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
      • [PATCH v10 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
    • [PATCH v10 0/3] add the GPMI controller driver for IMX23/IMX28   Marek Vasut
      • [PATCH v10 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH 2/2] ARM: mach-ux500: add explicit cpu_relax() for busy wait loop   Barry Song
  • [PATCH 2/2] ARM: mach-ux500: add explicit cpu_relax() for busy wait loop   Linus Walleij
• [PATCH 1/1] ASoC: soc-core: check rate for symmetry only when pcm is ongoing   Dong Aisheng
  • [PATCH 1/1] ASoC: soc-core: check rate for symmetry only when pcm is ongoing   Mark Brown
    • [PATCH 1/1] ASoC: soc-core: check rate for symmetry only when pcm is ongoing   Dong Aisheng-B29396
  • [alsa-devel] [PATCH 1/1] ASoC: soc-core: check rate for symmetry only when pcm is ongoing   Lars-Peter Clausen
    • [alsa-devel] [PATCH 1/1] ASoC: soc-core: check rate for symmetry only when pcm is ongoing   Dong Aisheng-B29396
      • [alsa-devel] [PATCH 1/1] ASoC: soc-core: check rate for symmetry only when pcm is ongoing   Lars-Peter Clausen
• i.MX multi SoC patches   Sascha Hauer
  • [PATCH 1/4] ARM i.MX: allow to compile together ARMv4 and ARMv5 based SoCs   Sascha Hauer
  • [PATCH 2/4] ARM i.MX: allow to compile together all i.MX5 based SoCs   Sascha Hauer
  • [PATCH 3/4] ARM i.MX5: update defconfig   Sascha Hauer
  • [PATCH 4/4] ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs   Sascha Hauer
  • i.MX multi SoC patches   Hector Oron
    • i.MX multi SoC patches   Sascha Hauer
    • i.MX multi SoC patches   hector.oron at gmail.com
      • [PATCH] ARM: mx5: fix remaining unconsistent names for irqs   hector.oron at gmail.com
      • i.MX multi SoC patches   Hector Oron
    • [PATCH] ARM: mx5: fix remaining unconsistent names for irqs   hector.oron at gmail.com
      • [PATCH] ARM: mx5: fix remaining unconsistent names for irqs   Arnaud Patard (Rtp)
      • [PATCH] ARM: mx5: fix remaining unconsistent names for irqs   Sascha Hauer
  • i.MX multi SoC patches   Hector Oron
    • i.MX multi SoC patches   Shawn Guo
• [PATCH] OMAP3EVM: ehci: Fix EHCI support   Igor Grinberg
• [PATCH v2] OMAP3EVM: ehci: Fix EHCI support   Bryan DE FARIA
  • [PATCH v2] OMAP3EVM: ehci: Fix EHCI support   Gupta, Ajay Kumar
    • [PATCH v2] OMAP3EVM: ehci: Fix EHCI support   Bryan DE FARIA
      • [PATCH v2] OMAP3EVM: ehci: Fix EHCI support   Gupta, Ajay Kumar
      • [PATCH v2] OMAP3EVM: ehci: Fix EHCI support   Bryan DE FARIA
      • [PATCH v2] OMAP3EVM: ehci: Fix EHCI support   Gupta, Ajay Kumar
• [PATCH 1/3] mach-ux500: factor out l2x0 handling code   Linus Walleij
• [PATCH 2/3] mach-ux500: initialize l2x0 at arch_init time   Linus Walleij
  • [PATCH 2/3] mach-ux500: initialize l2x0 at arch_init time   Santosh
    • [PATCH 2/3] mach-ux500: initialize l2x0 at arch_init time   Kyungmin Park
      • [PATCH 2/3] mach-ux500: initialize l2x0 at arch_init time   Linus Walleij
      • [PATCH 2/3] mach-ux500: initialize l2x0 at arch_init time   Sascha Hauer
      • [PATCH 2/3] mach-ux500: initialize l2x0 at arch_init time   Jason Liu
• [PATCH 3/3] mach-ux500: unlock I&D l2x0 caches before init   Linus Walleij
• [GIT PULL] at91: fixes for 3.1   Nicolas Ferre
  • [GIT PULL] at91: fixes for 3.1   Arnd Bergmann
• [RFC PATCH 0/7] OMAP: Add initial support for DT on OMAP4   Benoit Cousson
  • [RFC PATCH 1/7] OMAP3+: boards: Fix the __initconst build error   Benoit Cousson
  • [RFC PATCH 2/7] arm/dts: Add initial device tree support for OMAP4 SoC   Benoit Cousson
    • [RFC PATCH 2/7] arm/dts: Add initial device tree support for OMAP4 SoC   Rob Herring
      • [RFC PATCH 2/7] arm/dts: Add initial device tree support for OMAP4 SoC   Cousson, Benoit
  • [RFC PATCH 3/7] arm/dts: Update OMAP4 Panda to include common omap4.dtsi   Benoit Cousson
  • [RFC PATCH 4/7] arm/dts: Add support for OMAP4 SDP board   Benoit Cousson
  • [RFC PATCH 5/7] OMAP4: board-panda: Remove DT support from regular board   Benoit Cousson
  • [RFC PATCH 6/7] OMAP4: board-dt: Add generic board with DT support   Benoit Cousson
  • [RFC PATCH 7/7] documentation/dt: Add OMAP bindings   Benoit Cousson
• [PATCH v4] OMAP4: hwmod data: I2C: add flag for context restore   Shubhrajyoti
  • [PATCH v4] OMAP4: hwmod data: I2C: add flag for context restore   Kevin Hilman
    • [PATCH v4] OMAP4: hwmod data: I2C: add flag for context restore   Shubhrajyoti
• [PATCH] mtd: check parts pointer before using it   Jason Liu
  • [PATCH] mtd: check parts pointer before using it   Jamie Iles
    • [PATCH] mtd: check parts pointer before using it   Jason Liu
• [PATCH v2 1/1] ASoC: soc-core: check rate for symmetry only when pcm is active   Dong Aisheng
  • [PATCH v2 1/1] ASoC: soc-core: check rate for symmetry only when pcm is active   Liam Girdwood
    • [alsa-devel] [PATCH v2 1/1] ASoC: soc-core: check rate for symmetry only when pcm is active   Lars-Peter Clausen
      • [alsa-devel] [PATCH v2 1/1] ASoC: soc-core: check rate for symmetry only when pcm is active   Mark Brown
      • [alsa-devel] [PATCH v2 1/1] ASoC: soc-core: check rate for symmetry only when pcm is active   Lars-Peter Clausen
      • [alsa-devel] [PATCH v2 1/1] ASoC: soc-core: check rate for symmetry only when pcm is active   Mark Brown
      • [alsa-devel] [PATCH v2 1/1] ASoC: soc-core: check rate for symmetry only when pcm is active   Dong Aisheng-B29396
• [PATCH 3.1-rc1] ARM: entry: fix wrong parameter used in do_thumb_abort   Janusz Krzysztofik
• Gumstix: smc91x and CPU frequency scaling hangs system.   Robert Aden
• [[PATCH v2] mtd: check parts pointer before using it   Jason Liu
• [PATCH 0/3] omap cleanup for makefile and init_early   Tony Lindgren
  • [PATCH 1/3] omap2+: Use Kconfig symbol in Makefile instead of obj-y   Tony Lindgren
  • [PATCH 2/3] ARM: OMAP: Move omap2_init_common_devices out of init_early   Tony Lindgren
    • [PATCH 2/3] ARM: OMAP: Move omap2_init_common_devices out of init_early   Cousson, Benoit
      • [PATCH 2/3] ARM: OMAP: Move omap2_init_common_devices out of init_early   Santosh
      • [PATCH 2/3] ARM: OMAP: Move omap2_init_common_devices out of init_early   Tony Lindgren
      • [PATCH 2/3] ARM: OMAP: Move omap2_init_common_devices out of init_early   Tony Lindgren
  • [PATCH 3/3] ARM: OMAP: Introduce SoC specific early_init   Tony Lindgren
    • [PATCH 3/3] ARM: OMAP: Introduce SoC specific early_init   Igor Grinberg
      • [PATCH 3/3] ARM: OMAP: Introduce SoC specific early_init   Tony Lindgren
• [PATCH] omap1: Remove unused omap-alsa.h   Jarkko Nikula
• [PATCH] ARM: i.MX: initialize l2x0 at early_init time   Jason Liu
  • [PATCH] ARM: i.MX: initialize l2x0 at early_init time   Arnaud Patard (Rtp)
    • [PATCH] ARM: i.MX: initialize l2x0 at early_init time   Jason Liu
• [RFC PATCH 00/10] OMAP: Add DT support for early init OMAP4 devices   Benoit Cousson
  • [RFC PATCH 01/10] OMAP2+: l3-noc: Add support for device-tree   Benoit Cousson
  • [RFC PATCH 02/10] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Benoit Cousson
  • [RFC PATCH 03/10] documentation/dt: Add l3-noc bindings   Benoit Cousson
  • [RFC PATCH 04/10] arm/dts: OMAP4: Add mpu, dsp and iva nodes   Benoit Cousson
  • [RFC PATCH 05/10] documentation/dt: Add mpu, dsp and iva bindings   Benoit Cousson
  • [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Benoit Cousson
  • [RFC PATCH 07/10] documentation/dt: Add spinlock bindings   Benoit Cousson
  • [RFC PATCH 08/10] gpio/omap: Adapt GPIO driver to DT   Benoit Cousson
  • [RFC PATCH 09/10] arm/dts: OMAP4: Add gpio nodes   Benoit Cousson
  • [RFC PATCH 10/10] documentation/dt: Add OMAP GPIO properties   Benoit Cousson
• [PATCH 0/11] generic struct clk patches   Mark Brown
  • [PATCH 01/11] clk: Add a generic clock infrastructure   Mark Brown
    • [PATCH 10/11] clk: Add initial WM831x clock driver   Mark Brown
• [PATCH 02/11] clk: Implement clk_set_rate   Mark Brown
  • [PATCH 02/11] clk: Implement clk_set_rate   Sascha Hauer
    • [PATCH 02/11] clk: Implement clk_set_rate   Mark Brown
      • [PATCH 02/11] clk: Implement clk_set_rate   Sascha Hauer
      • [PATCH 02/11] clk: Implement clk_set_rate   Mark Brown
  • [PATCH 02/11] clk: Implement clk_set_rate   Turquette, Mike
• [PATCH 03/11] clk: Add fixed-rate clock   Mark Brown
• [PATCH 04/11] clk: Add simple gated clock   Mark Brown
  • [PATCH 04/11] clk: Add simple gated clock   Jamie Iles
• [PATCH 05/11] clk: Prototype and document clk_register()   Mark Brown
• [PATCH 06/11] clk: Provide a dummy clk_unregister()   Mark Brown
  • [PATCH 06/11] clk: Provide a dummy clk_unregister()   Jamie Iles
• [PATCH 07/11] clk: Constify struct clk_hw_ops   Mark Brown
• [PATCH 08/11] clk: Avoid clock name collisions   Mark Brown
• [PATCH 09/11] clk: Add Kconfig option to build all generic clk drivers   Mark Brown
• [PATCH 11/11] x86: Enable generic clk API on x86   Mark Brown
• [PATCH 1/2] mmc: sdhci move vmmc to set_ios   zhangfei gao
• [PATCH 0/5] ARM: EXYNOS4: Add support new EXYNOS4212 SoC   Kukjin Kim
  • [PATCH 1/5] ARM: EXYNOS4: Add support new EXYNOS4212 SoC   Kukjin Kim
  • [PATCH 2/5] ARM: EXYNOS4: Add support clock for EXYNOS4212   Kukjin Kim
  • [PATCH 3/5] ARM: EXYNOS4: Add support PM for EXYNOS4212   Kukjin Kim
    • [PATCH 3/5] ARM: EXYNOS4: Add support PM for EXYNOS4212   MyungJoo Ham
      • [PATCH 3/5] ARM: EXYNOS4: Add support PM for EXYNOS4212   Kukjin Kim
      • [PATCH 3/5] ARM: EXYNOS4: Add support PM for EXYNOS4212   Rafael J. Wysocki
      • [PATCH 3/5] ARM: EXYNOS4: Add support PM for EXYNOS4212   Kukjin Kim
  • [PATCH 4/5] ARM: EXYNOS4: Add support SMDK4212 Board   Kukjin Kim
  • [PATCH 5/5] tty: Add support serial for EXYNOS4212 SoC   Kukjin Kim
• [PATCH 0/6] mc13783 cleanup   Uwe Kleine-König
  • [PATCH 0/6] mc13783 cleanup   Philippe Rétornaz
    • [PATCH 0/6] mc13783 cleanup   Uwe Kleine-König
• [PATCH 4/6] ARM: imx: use mc13xxx constants instead of mc13783   Uwe Kleine-König
• dma buffers for camera   Jan Pohanka
  • dma buffers for camera   Guennadi Liakhovetski
    • dma buffers for camera   Jan Pohanka
• [PATCHv2 0/3] Initial support for Picochip picoxcell   Jamie Iles
  • [PATCHv2 1/3] picoxcell: support for Picochip picoxcell devices   Jamie Iles
  • [PATCHv2 2/3] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Jamie Iles
  • [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Jamie Iles
• MMU enable code in boot/compressed/head.S   Moon Hwa Hong
• [PATCH] ARM: imx: Define functions for registering PATA   Fabio Estevam
• [PATCH v3] OMAP3EVM: ehci: Fix EHCI support   Bryan DE FARIA
  • [PATCH v3] OMAP3EVM: ehci: Fix EHCI support   Gupta, Ajay Kumar
• [PATCH v2 0/7] omap: iommu migration, relocation and cleanups   Ohad Ben-Cohen
  • [PATCH v2 1/7] omap: iommu: migrate to the generic IOMMU API   Ohad Ben-Cohen
  • [PATCH v2 2/7] omap: iommu/iovmm: move to dedicated iommu folder   Ohad Ben-Cohen
  • [PATCH v2 3/7] omap: iommu: stop exporting local functions   Ohad Ben-Cohen
  • [PATCH v2 4/7] omap: iommu: PREFETCH_IOTLB cleanup   Ohad Ben-Cohen
  • [PATCH v2 5/7] omap: iovmm: remove unused functionality   Ohad Ben-Cohen
  • [PATCH v2 6/7] omap: iommu: remove unused exported API   Ohad Ben-Cohen
  • [PATCH v2 7/7] omap: iommu: omapify 'struct iommu' and exposed API   Ohad Ben-Cohen
  • [PATCH v2 0/7] omap: iommu migration, relocation and cleanups   Tony Lindgren
  • [PATCH v2 0/7] omap: iommu migration, relocation and cleanups   Roedel, Joerg
    • [PATCH v2 0/7] omap: iommu migration, relocation and cleanups   Ohad Ben-Cohen
• [PATCH] Fix show_regs to give a backtrace   Laura Abbott
  • [PATCH 1/2] arm: add dump_stack_regs to dump stack from registers   Laura Abbott
  • [PATCH 2/2] process: change from __backtrace to dump_stack_regs in show_regs   Laura Abbott
    • [PATCH 2/2] process: change from __backtrace to dump_stack_regs in show_regs   Nicolas Pitre
      • [PATCH 2/2] process: change from __backtrace to dump_stack_regs in show_regs   Laura Abbott
      • [PATCH 2/2] process: change from __backtrace to dump_stack_regs in show_regs   Nicolas Pitre
• [PATCH 1/2] Revert "[ARM] eSATA SheevaPlug: correlate MPP to SD CD and SD WP"   Sean Young
• [PATCH 2/2] [ARM] SheevaPlug: Add the blue led   Sean Young
• [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors   Venkatraman S
  • [PATCH 1/2] omap2+: Populate nr_irqs field in machine descriptors   Venkatraman S
  • [PATCH 2/2] omap1: Populate nr_irqs field in machine descriptors   Venkatraman S
  • [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors   Cousson, Benoit
    • [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors   S, Venkatraman
• MX53Loco reports half of the total memory   Fabio Estevam
  • MX53Loco reports half of the total memory   Sascha Hauer
    • MX53Loco reports half of the total memory   Fabio Estevam
    • MX53Loco reports half of the total memory   Russell King - ARM Linux
      • MX53Loco reports half of the total memory   Fabio Estevam
      • MX53Loco reports half of the total memory   Russell King - ARM Linux
• [PATCH] ARM: mx53_loco: Add support for the accelerometer   Fabio Estevam
  • [PATCH] ARM: mx53_loco: Add support for the accelerometer   Sascha Hauer
• [PATCH] ARM: mx5: Select CONFIG_VMSPLIT_2G option   Fabio Estevam
• [PATCH] ARM: mx5: Enable HIGHMEM   Fabio Estevam
• [GIT PULL] I2C: OMAP: misc. fixes for v3.2   Kevin Hilman
• [PATCH 0/1] PM: omap_device fix for v3.1-rc   Kevin Hilman
  • [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume   Kevin Hilman
    • [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume   Rafael J. Wysocki
• To use DMA generic APIs for Samsung DMA   Boojin Kim
  • [PATCH v7 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC   Boojin Kim
  • [PATCH v7 02/15] DMA: PL330: Update PL330 DMA API driver   Boojin Kim
    • [PATCH v7 02/15] DMA: PL330: Update PL330 DMA API driver   Jassi Brar
    • [PATCH v7 02/15] DMA: PL330: Update PL330 DMA API driver   Vinod Koul
      • [PATCH v7 02/15] DMA: PL330: Update PL330 DMA API driver   Vinod Koul
      • [PATCH v7 02/15] DMA: PL330: Update PL330 DMA API driver   Vinod Koul
  • [PATCH v7 03/15] DMA: PL330: Modify device_control()   Boojin Kim
    • [PATCH v7 03/15] DMA: PL330: Modify device_control()   Jassi Brar
  • [PATCH v7 04/15] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
    • [PATCH v7 04/15] DMA: PL330: Add DMA_CYCLIC capability   Jassi Brar
  • [PATCH v7 05/15] ARM: SAMSUNG: Update to use PL330-DMA driver   Boojin Kim
  • [PATCH v7 06/15] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
  • [PATCH v7 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver   Boojin Kim
  • [PATCH v7 08/15] ARM: S5PV210: Use generic DMA PL330 driver   Boojin Kim
  • [PATCH v7 09/15] ARM: S5PC100: Use generic DMA PL330 driver   Boojin Kim
  • [PATCH v7 10/15] ARM: S5P64X0: Use generic DMA PL330 driver   Boojin Kim
  • [PATCH v7 11/15] ARM: SAMSUNG: Remove S3C-PL330-DMA driver   Boojin Kim
  • [PATCH v7 12/15] spi/s3c64xx: Add support DMA engine API   Boojin Kim
  • [PATCH v7 13/15] spi/s3c64xx: Merge dma control code   Boojin Kim
  • [PATCH v7 14/15] ASoC: Samsung: Update DMA interface   Boojin Kim
  • [PATCH v7 15/15] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction   Boojin Kim
• [PATCH 10/10] ARM: perf: add mode exclusion for Cortex-A15 PMU   Ashwin Chaugule
  • [PATCH 10/10] ARM: perf: add mode exclusion for Cortex-A15 PMU   Will Deacon
• Question on virtual memory layout: lowmem with memory hole   Pedanekar, Hemant
  • Question on virtual memory layout: lowmem with memory hole   Russell King - ARM Linux
    • Question on virtual memory layout: lowmem with memory hole   Pedanekar, Hemant
      • Question on virtual memory layout: lowmem with memory hole   Russell King - ARM Linux
      • Question on virtual memory layout: lowmem with memory hole   Pedanekar, Hemant
• Kernel panic in 2.6.35.12 kernel   naveen yadav
  • Kernel panic in 2.6.35.12 kernel   naveen yadav
  • Kernel panic in 2.6.35.12 kernel   Steve Chen
    • Kernel panic in 2.6.35.12 kernel   naveen yadav
• [PATCH v3 0/2] mmc add vsdio to dynamically control sdio power   Zhangfei Gao
  • [PATCH v3 1/2] mmc: sdio add regulator vsdio   Zhangfei Gao
    • [PATCH v3 1/2] mmc: sdio add regulator vsdio   Eric Miao
      • [PATCH v3 1/2] mmc: sdio add regulator vsdio   zhangfei gao
  • [PATCH v3 2/2] ARM: mmp2: support sdio with regulator vsdio   Zhangfei Gao
• [PATCH v2] ARM: ux500: send cpufreq notification for all cpus   Vincent Guittot
  • [PATCH v2] ARM: ux500: send cpufreq notification for all cpus   Linus Walleij
    • [PATCH v2] ARM: ux500: send cpufreq notification for all cpus   Dave Jones
• [PATCH 8/8] ARM: S5PV210: example of CMA private area for FIMC device on Goni board   Marek Szyprowski
• [PATCH 1/3] add Freecom Datatank Gateway support   Zintis Petersons
• i.MX SDMA patches   Sascha Hauer
  • [PATCH 1/3] dmaengine i.MX SDMA: lock channel 0   Sascha Hauer
  • [PATCH 2/3] dmaengine i.MX SDMA: set firmware scripts addresses to negative value initially   Sascha Hauer
  • [PATCH 3/3] dmaengine i.MX SDMA: use request_firmware_nowait   Sascha Hauer
    • [PATCH 3/3] dmaengine i.MX SDMA: use request_firmware_nowait   Koul, Vinod
      • [PATCH 3/3] dmaengine i.MX SDMA: use request_firmware_nowait   Sascha Hauer
  • i.MX SDMA patches   Vinod Koul
• [PATCH] mmc mxcmmc: fix falling back to PIO   Sascha Hauer
  • [PATCH] mmc mxcmmc: fix falling back to PIO   Sascha Hauer
• [PATCH 1/2] new helper to create platform devices with dma mask   Uwe Kleine-König
  • [PATCH 2/2] ARM: mxc: convert device creation to use platform_device_register_full   Uwe Kleine-König
• [PATCH v4] OMAP3EVM: ehci: Fix EHCI support   Bryan DE FARIA
• [PATCH v2] mmc mxcmmc: fix falling back to PIO   Sascha Hauer
  • [PATCH v2] mmc mxcmmc: fix falling back to PIO   Sascha Hauer
• [PATCH 3/6] mc13xxx: remove obsolete leds and regulators flags   Sascha Hauer
• [PATCH 6/6] mx31moboard: Add MC13783 power button support   Sascha Hauer
• [PATCH] arm: mach-imx: enable all uart clocks for DEBUG_LL   Wolfram Sang
  • [PATCH] arm: mach-imx: enable all uart clocks for DEBUG_LL   Shawn Guo
    • [PATCH] arm: mach-imx: enable all uart clocks for DEBUG_LL   Shawn Guo
      • [PATCH] arm: mach-imx: enable all uart clocks for DEBUG_LL   Wolfram Sang
• [PATCH] ARM: imx: Remove unused chip revision strings   Fabio Estevam
• [PATCH] ARM: mm: keep significant bits in pfn_valid   Mark Rutland
• [PATCH v3] at91: merge board usb-a9260 and usb-a9263 together   Nicolas Ferre
  • [PATCH v3] at91: merge board usb-a9260 and usb-a9263 together   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v3] at91: merge board usb-a9260 and usb-a9263 together   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/2 v4] at91: merge board usb-a9260 and usb-a9263 together   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/2 v4] at91: merge board usb-a9260 and usb-a9263 together   Nicolas Ferre
  • [PATCH 2/2] at91: USB-A9G20 C01 & C11 board support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 2/2] at91: USB-A9G20 C01 & C11 board support   Nicolas Ferre
• [GIT PULL] orion5x and footbridge compile fixes for 3.1   Rob Herring
  • [GIT PULL] orion5x and footbridge compile fixes for 3.1   Paul Gortmaker
  • [GIT PULL] orion5x and footbridge compile fixes for 3.1   Arnd Bergmann
    • [GIT PULL] orion5x and footbridge compile fixes for 3.1   Rob Herring
      • [GIT PULL] orion5x and footbridge compile fixes for 3.1   Arnd Bergmann
• [patch 1/1] efika: Configure esdhc cd/wp on efika mx/sb   Arnaud Patard (Rtp)
  • [patch 1/1] efika: Configure esdhc cd/wp on efika mx/sb   Sascha Hauer
    • [patch 1/1] efika: Configure esdhc cd/wp on efika mx/sb   Arnaud Patard (Rtp)
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init=   Rajendra Nayak
• [PATCH] ARM: mx51: Fix chip revision detection   Fabio Estevam
• [PATCH 0/2] i.MX3: support multi-size buffers in V4L   Guennadi Liakhovetski
  • [PATCH 1/2] dmaengine: ipu-idmac: add support for the DMA_PAUSE control   Guennadi Liakhovetski
    • [PATCH 1/2] dmaengine: ipu-idmac: add support for the DMA_PAUSE control   Vinod Koul
      • [PATCH 1/2] dmaengine: ipu-idmac: add support for the DMA_PAUSE control   Guennadi Liakhovetski
  • [PATCH 2/2] V4L: mx3-camera: prepare to support multi-size buffers   Guennadi Liakhovetski
    • [PATCH 2/2] V4L: mx3-camera: prepare to support multi-size buffers   Laurent Pinchart
      • [PATCH 2/2] V4L: mx3-camera: prepare to support multi-size buffers   Guennadi Liakhovetski
• [PATCH]arm: nwfpe: '&pointer[0]' to 'pointer' fix   Maxin B. John
  • [PATCH]arm: nwfpe: '&pointer[0]' to 'pointer' fix   Russell King - ARM Linux
• [PATCH 0/2] video: s3c-fb: Add window positioning support   Ajay Kumar
  • [PATCH 1/2] ARM: SAMSUNG: Add Window Positioning Support for s3c-fb driver   Ajay Kumar
  • [PATCH 2/2] video: s3c-fb: Modify s3c-fb driver to support window positioning   Ajay Kumar
• kernel driver for rs232 serial peripheral   Joey Oravec
  • kernel driver for rs232 serial peripheral   Arnd Bergmann
• [GIT PULL] mmc: msm_sdcc: Fixes for 3.2   David Brown
• [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Stephen Warren
  • [PATCH v3 01/13] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs   Stephen Warren
  • [PATCH v3 02/13] docs/dt: Document nvidia, tegra20-gpio's nvidia, enabled-gpios property   Stephen Warren
  • [PATCH v3 03/13] arm/dt: Tegra: Add nvidia, enabled-gpios property to GPIO controller   Stephen Warren
  • [PATCH v3 04/13] docs/dt: Document nvidia,tegra20-pinmux binding   Stephen Warren
  • [PATCH v3 05/13] arm/dt: Tegra: Add pinmux node   Stephen Warren
  • [PATCH v3 06/13] dt: add empty for_each_child_of_node, of_find_property   Stephen Warren
    • [PATCH v3 06/13] dt: add empty for_each_child_of_node, of_find_property   Stephen Warren
  • [PATCH v3 07/13] gpio/tegra: Convert to a platform device   Stephen Warren
  • [PATCH v3 08/13] gpio/tegra: Add device tree support   Stephen Warren
  • [PATCH v3 09/13] arm/tegra: Convert pinmux driver to a platform device   Stephen Warren
  • [PATCH v3 10/13] of: add a generic pinmux helper   Stephen Warren
    • [PATCH v3 10/13] of: add a generic pinmux helper   Jamie Iles
    • [PATCH v3 10/13] of: add a generic pinmux helper   Linus Walleij
      • [PATCH v3 10/13] of: add a generic pinmux helper   Stephen Warren
  • [PATCH v3 11/13] of: add property iteration helpers   Stephen Warren
    • [PATCH v3 11/13] of: add property iteration helpers   Jamie Iles
      • [PATCH v3 11/13] of: add property iteration helpers   Stephen Warren
      • [PATCH v3 11/13] of: add property iteration helpers   Jamie Iles
  • [PATCH v3 12/13] arm/tegra: Add device tree support to pinmux driver   Stephen Warren
  • [PATCH v3 13/13] arm/tegra: board-dt: Remove dependency on non-dt pinmux functions   Stephen Warren
  • [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Olof Johansson
    • [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT   Stephen Warren
• [PATCH] process: change from __backtrace to dump_stack in show_regs   Laura Abbott
  • [PATCH] process: change from __backtrace to dump_stack in show_regs   Nicolas Pitre
• [PATCH] ARM: EXYNOS4: Fix routing timer interrupt to offline CPU   Kukjin Kim
• ARMv7 MMU and cache enabling code in boot/compressed/head.S   Moon Hwa Hong
• [PATCH 1/2] Adding platform level cpuidle driver for i.MX SoCs.   Robert Lee
  • [PATCH 2/2] Adding support for the plat-mxc cpuidle driver to mach-mx5. Tested on i.MX51 Babbage board with ARM core running at 800Mhz. Idle OS ARM core power before patch = ~400mW. Idle OS ARM core power after patch = ~1.25mW.   Robert Lee
    • [PATCH 2/2] Adding support for the plat-mxc cpuidle driver to mach-mx5. Tested on i.MX51 Babbage board with ARM core running at 800Mhz. Idle OS ARM core power before patch = ~400mW. Idle OS ARM core power after patch = ~1.25mW.   Russell King - ARM Linux
  • [PATCH 1/2] Adding platform level cpuidle driver for i.MX SoCs.   Sascha Hauer
    • [PATCH 1/2] Adding platform level cpuidle driver for i.MX SoCs.   Rob Lee
      • [PATCH 1/2] Adding platform level cpuidle driver for i.MX SoCs.   Sascha Hauer
  • [PATCH 1/2] Adding platform level cpuidle driver for i.MX SoCs.   Russell King - ARM Linux
• [[PATCH v2] ARM: i.MX: initialize l2x0 at early_init time   Jason Liu
  • [[PATCH v2] ARM: i.MX: initialize l2x0 at early_init time   Sascha Hauer
• [PATCH] pinmux: add a driver for the CSR SiRFprimaII pinmux   Barry Song
  • [PATCH] pinmux: add a driver for the CSR SiRFprimaII pinmux   Linus Walleij
    • [PATCH] pinmux: add a driver for the CSR SiRFprimaII pinmux   Barry Song
      • [PATCH] pinmux: add a driver for the CSR SiRFprimaII pinmux   Linus Walleij
• [PATCH] mtd: Replace DEBUG with MTD_DBG   Tanmay Upadhyay
  • [PATCH] mtd: Replace DEBUG with MTD_DBG   Brian Norris
    • [PATCH] mtd: Replace DEBUG with MTD_DBG   Tanmay Upadhyay
• [PATCH 2/2] video: s3c-fb: Modify s3c-fb driver to support window positioning   Ajay kumar
• [[PATCH v3 0/6] imx soc revision clean up   Jason Liu
  • [[PATCH v3 1/6] ARM: imx: Introduce generic function for displaying silicon revision   Jason Liu
  • [[PATCH v3 2/6] ARM: mx25: Print silicon revision on boot   Jason Liu
  • [[PATCH v3 3/6] ARM: mx27: Print silicon revision on boot   Jason Liu
  • [[PATCH v3 4/6] ARM: mx31: use generic function for displaying silicon revision   Jason Liu
  • [[PATCH v3 5/6] ARM: mx35: use generic function for displaying silicon revision   Jason Liu
  • [[PATCH v3 6/6] ARM: mx5: use generic function for displaying silicon revision   Jason Liu
  • [[PATCH v3 0/6] imx soc revision clean up   Sascha Hauer
• [PATCH 0/2] Add TVOUT support for SMDKV310   Hatim Ali
  • [PATCH 1/2] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Hatim Ali
  • [PATCH 2/2] ARM: EXYNOS4: Update consistent DMA size to 8MB   Hatim Ali
• [PATCH] s5p-tv: Add PM_RUNTIME dependency   Hatim Ali
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Jiejing.Zhang
• [PATCH 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
  • [PATCH 1/6] DMA: PL330: move filter function into driver   Thomas Abraham
    • [PATCH 2/6] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
      • [PATCH 3/6] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
      • [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
      • [PATCH 5/6] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
      • [PATCH 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
      • [PATCH 4/6] DMA: PL330: Add device tree support   Rob Herring
      • [PATCH 4/6] DMA: PL330: Add device tree support   Russell King - ARM Linux
      • [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
      • [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
  • [PATCH 0/6] Add device tree support for PL330 dma controller driver   Vinod Koul
    • [PATCH 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
  • [PATCH 01/18] led-triggers: use atomic kzalloc during led trigger registering   Bryan Wu
  • [PATCH 02/18] led-triggers: create a trigger for CPU activity   Bryan Wu
  • [PATCH 03/18] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers   Bryan Wu
  • [PATCH 04/18] mach-realview and mach-versatile: retire custom LED code   Bryan Wu
  • [PATCH 05/18] mach-ks8695: remove leds driver, since nobody use it   Bryan Wu
  • [PATCH 06/18] mach-shark: retire custom LED code   Bryan Wu
  • [PATCH 07/18] mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger   Bryan Wu
  • [PATCH 08/18] mach-integrator: move CM_CTRL to header file for accessing by other functions   Bryan Wu
  • [PATCH 09/18] mach-integrator: retire custom LED code   Bryan Wu
  • [PATCH 10/18] mach-clps711x: retire custom LED code of P720T machine   Bryan Wu
  • [PATCH 11/18] mach-ebsa110: retire custom LED code   Bryan Wu
  • [PATCH 12/18] mach-footbridge: retire custom LED code   Bryan Wu
  • [PATCH 13/18] mach-pxa: retire custom LED code   Bryan Wu
  • [PATCH 14/18] plat-samsung: remove including old leds event API header file   Bryan Wu
  • [PATCH 15/18] mach-pnx4008: remove including old leds event API header file   Bryan Wu
  • [PATCH 16/18] mach-omap1: retire custom LED code   Bryan Wu
  • [PATCH 17/18] mach-sa1100: retire custom LED code   Bryan Wu
  • [PATCH 18/18] ARM: use new LEDS CPU trigger stub to replace old one   Bryan Wu
  • [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Linus Walleij
    • [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
      • [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Russell King - ARM Linux
      • [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
      • [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Nicolas Pitre
• [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem   Girish K S
  • [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem   Jaehoon Chung
  • [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem   Chris Ball
• [RFC PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Dong Aisheng
  • [RFC PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Dong Aisheng-B29396
  • [RFC PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Lars-Peter Clausen
    • [RFC PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Dong Aisheng-B29396
      • [RFC PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Lars-Peter Clausen
      • [RFC PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Dong Aisheng-B29396
      • [RFC PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Lars-Peter Clausen
• [patch v2 1/1] efika: Configure esdhc cd/wp on efika mx/sb   Arnaud Patard (Rtp)
  • [patch v2 1/1] efika: Configure esdhc cd/wp on efika mx/sb   Arnaud Patard (Rtp)
• [PATCH 1/2] plarform-mx2-camera: fix missing header dma-mapping.h   Michael Grzeschik
• [PATCH 2/2] ARM: i.MX27 pca100: Add camera support for mt9m111   Michael Grzeschik
  • [PATCH 2/2] ARM: i.MX27 pca100: Add camera support for mt9m111   Uwe Kleine-König
• [PATCH v14 REPOST 01/12] OMAP2+: dmtimer: add device names to flck nodes   Santosh
• [PATCH v14 REPOST 03/12] OMAP1: dmtimer: conversion to platform devices   Santosh
• [PATCH v14 REPOST 04/12] OMAP2+: dmtimer: convert to platform devices   Santosh
• [PATCH v14 REPOST 05/12] OMAP: dmtimer: platform driver   Santosh
• I'm on holiday   Sascha Hauer
• [PATCH v14 REPOST 06/12] OMAP: dmtimer: switch-over to platform device driver   Santosh
• [PATCH v14 REPOST 02/12] OMAP4: hwmod data: add dmtimer version information   Santosh
• [PATCH v14 REPOST 07/12] OMAP: dmtimer: pm_runtime support   Santosh
  • [PATCH v14 REPOST 07/12] OMAP: dmtimer: pm_runtime support   Kevin Hilman
    • [PATCH v14 REPOST 07/12] OMAP: dmtimer: pm_runtime support   Santosh
• [PATCH v14 REPOST 08/12] OMAP: dmtimer: add timeout to low-level routines   Santosh
• [PATCH v14 REPOST 09/12] OMAP: dmtimer: use mutex instead of spinlock   Santosh
  • [PATCH v14 REPOST 09/12] OMAP: dmtimer: use mutex instead of spinlock   Santosh
• [PATCH v14 REPOST 10/12] OMAP: dmtimer: mark clocksource and clockevent timers reserved   Santosh
• [PATCH v14 REPOST 11/12] OMAP: dmtimer: add context save/restore routines   Santosh
• [PATCH] mach-ux500: Remove most of the ugly machine_is_u8500() calls   Lee Jones
  • [PATCH] mach-ux500: Remove most of the ugly machine_is_u8500() calls   Linus Walleij
  • [PATCH] mach-ux500: Remove most of the ugly machine_is_u8500() calls   Arnd Bergmann
• [PATCH v14 REPOST 12/12] OMAP: dmtimer: Off mode support   Santosh
• [PATCH v9 00/12] use nonblock mmc requests to minimize latency   Russell King - ARM Linux
  • [PATCH v9 00/12] use nonblock mmc requests to minimize latency   Santosh
    • [PATCH v9 00/12] use nonblock mmc requests to minimize latency   Per Forlin
      • [PATCH v9 00/12] use nonblock mmc requests to minimize latency   Russell King - ARM Linux
      • [PATCH v9 00/12] use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH] ARM: S3C64XX: Hook up some additional supplies on Cragganmore   Mark Brown
  • [PATCH] ARM: S3C64XX: Hook up some additional supplies on Cragganmore   Kukjin Kim
• [PATCH 1/5] ARM: mx5: Allow CCM definitions to work on MX51 and MX53   Fabio Estevam
  • [PATCH 2/5] ARM: mx53: Register gpc_dvfs clock   Fabio Estevam
    • [PATCH 3/5] ARM: mx53: Fix the logic for BYPASS_MAX_LPM_HS   Fabio Estevam
  • [PATCH 1/5] ARM: mx5: Allow CCM definitions to work on MX51 and MX53   Sascha Hauer
    • [PATCH 1/5] ARM: mx5: Allow CCM definitions to work on MX51 and MX53   Fabio Estevam
      • [PATCH 1/5] ARM: mx5: Allow CCM definitions to work on MX51 and MX53   Sascha Hauer
• [PATCH 5/5] ARM: mx53: Allow suspend/resume on mx53   Fabio Estevam
• [PATCH 4/5] ARM: mx53: Allow gpio_keys to wake the system   Fabio Estevam
• 3.1-rc3 on spitz   Pavel Machek
  • 3.1-rc3 on spitz   Marek Vasut
• [PATCH] ARM: kprobes: Fix jprobe registration on Thumb kernels   Tixy
  • Thumb symbol lookup. Was [PATCH] ARM: kprobes: Fix jprobe registration on Thumb kernels   Tixy
• [patch v3 1/1] efika: Configure esdhc cd/wp on efika mx/sb   Arnaud Patard (Rtp)
• [patch 1/1] Fix pata imx resource   Arnaud Patard (Rtp)
• [patch 1/1] MX5: fix clock usage   Arnaud Patard (Rtp)
• [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   ming.lei at canonical.com
  • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Santosh
    • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Santosh
  • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Greg KH
    • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Greg KH
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Alan Stern
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Alan Stern
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Alan Stern
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Russell King - ARM Linux
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Alan Stern
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Russell King - ARM Linux
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Alan Stern
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Mark Salter
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Alan Stern
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Alan Stern
      • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Ming Lei
  • [PATCH] usb: ehci: fix update qtd->token in qh_append_tds   Sergei Shtylyov
• [PATCH] ARM: vfp: Fix the comment to make it consistent with the code.   Santosh Shilimkar
• [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Tomasz Figa
• [PATCH 2/5] ARM: s3c64xx: Add generic high resolution time support using PWM timers.   Tomasz Figa
• [PATCH 3/5] ARM: Samsung: pwm: Exclude timer 3 on S3C64xx if generic time is enabled.   Tomasz Figa
• [PATCH 4/5] ARM: s3c64xx: Move all machines to s3c64xx_timer.   Tomasz Figa
• [PATCH 5/5] ARM: s3c64xx: Add optional local sched_clock implementation.   Tomasz Figa
• [PATCH 0/5] Add high resolution generic time support for S3C64xx   Tomasz Figa
• zaurus patches -- arm/pxa -- is Eric alive   Pavel Machek
• [PATCH v2 0/4] S3C2416: Enable IIS and HSSPI clocks   Heiko Stübner
  • [PATCH v2 1/4] S3C2443: Move i2s clock definitions to common code   Heiko Stübner
  • [PATCH 2/4] S3C2443: Define constant for HSSPI pclk   Heiko Stübner
  • [PATCH v2 3/4] S3C2416: Add HSSPI clock sourced from EPLL   Heiko Stübner
  • [PATCH v2 4/4] S3C2443: Add hsspi-clock from pclk and rename unused S3C2443 hsspi sclk   Heiko Stübner
• [PATCH] mmc: omap_hsmmc: DMA unmap only once in case of MMC error   Per Forlin
• [PATCH V6 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Richard Zhu
  • [PATCH V6 3/5] MX53 Enable the AHCI SATA on MX53 ARD board   Richard Zhu
    • [PATCH V6 3/5] MX53 Enable the AHCI SATA on MX53 ARD board   Eric Miao
      • [PATCH V6 3/5] MX53 Enable the AHCI SATA on MX53 ARD board   Richard Zhu
  • [PATCH V6 4/5] MX53 Enable the AHCI SATA on MX53 LOCO board   Richard Zhu
  • [PATCH V6 5/5] MX53 Enable the AHCI SATA on MX53 SMD board   Richard Zhu
• [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Richard Zhu
  • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Eric Miao
  • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Wolfram Sang
    • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Eric Miao
      • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Wolfram Sang
      • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Eric Miao
      • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Wolfram Sang
  • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Anton Vorontsov
    • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Eric Miao
      • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Richard Zhu
      • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Eric Miao
      • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Richard Zhu
      • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Richard Zhu
      • [PATCH V6 2/5] ahci_plt Add the board_ids and pi refer to different features   Eric Miao
• [PATCH] ARM: mxs: Add initial support for DENX MX28   Stefano Babic
• [PATCH 0/4 v5] pin controller subsystem v5   Linus Walleij
• [PATCH 1/4 v5] drivers: create a pin control subsystem v5   Linus Walleij
  • [PATCH 1/4 v5] drivers: create a pin control subsystem v5   Stephen Warren
  • [PATCH 1/4 v5] drivers: create a pin control subsystem v5   Jamie Iles
  • [PATCH 1/4 v5] drivers: create a pin control subsystem v5   Barry Song
• [PATCH 2/4 v5] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 3/4 v5] amba: request muxing for PrimeCell devices   Linus Walleij
• [PATCH 4/4 v5] mach-u300: activate pinmux driver, delete old padmux driver   Linus Walleij
• [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Dong Aisheng
  • [alsa-devel] [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Tabi Timur-B04825
    • [alsa-devel] [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Dong Aisheng-B29396
      • [alsa-devel] [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Liam Girdwood
      • [alsa-devel] [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Tabi Timur-B04825
      • [alsa-devel] [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Lars-Peter Clausen
• [PATCH v11 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v11 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
• [PATCH v11 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Huang Shijie
• [PATCH v11 3/3] MTD : add GPMI-NAND driver in the config and Makefile   Huang Shijie
• [PATCH 00/10] ARM: kprobes: Test code   Tixy
  • [PATCH 01/10] ARM: kprobes: Add config option for selecting the ARM kprobes tests   Tixy
    • [PATCH 01/10] ARM: kprobes: Add config option for selecting the ARM kprobes tests   Nicolas Pitre
      • [PATCH 01/10] ARM: kprobes: Add config option for selecting the ARM kprobes tests   Tixy
      • [PATCH 01/10] ARM: kprobes: Add config option for selecting the ARM kprobes tests   Nicolas Pitre
  • [PATCH 03/10] ARM: kprobes: Framework for instruction set test cases   Tixy
  • [PATCH 04/10] ARM: kprobes: Add Thumb instruction simulation test cases   Tixy
  • [PATCH 05/10] ARM: kprobes: Add ARM instruction simulation test cases   Tixy
  • [PATCH 07/10] ARM: kprobes: Add decoding table self-consistency tests   Tixy
  • [PATCH 08/10] ARM: kprobes: Add decoding table test coverage analysis   Tixy
  • [PATCH 09/10] ARM: kprobes: Add some benchmarking to test module   Tixy
• [PATCH 02/10] ARM: kprobes: Add basic API tests   Tixy
• [PATCH 06/10] ARM: kprobes: Add exports for test code   Tixy
• [PATCH 10/10] ARM: kprobes: Add introductory comment to test code   Tixy
• [RFC PATCH-V2 0/4] Introducing TI's New SoC/board AM335XEVM   hvaibhav at ti.com
• [RFC PATCH-V2 1/4] AM335X: Update common omap platform files   hvaibhav at ti.com
• [RFC PATCH-V2 2/4] AM335X: Update common OMAP machine specific sources   hvaibhav at ti.com
• [RFC PATCH-V2 3/4] AM335X: Create board support and enable build for AM335XEVM   hvaibhav at ti.com
• [RFC PATCH-V2 4/4] AM335X: Add low level debugging support   hvaibhav at ti.com
• [PATCH] ARM: mx25: Add the missing IIM base definition   Jason Liu
• [PATCH 0/2] mmc: clarifications on host.post_req()   Per Forlin
  • [PATCH 1/2] mmc: core: clarify how to use post_req in case of errors   Per Forlin
  • [PATCH 2/2] mmc: mmci: simplify err check in mmci_post_request   Per Forlin
• [RFC PATCH] arm: fiq: convert enable/disable_fiq to inline functions   Venkatraman S
  • [RFC PATCH] arm: fiq: convert enable/disable_fiq to inline functions   Nicolas Pitre
    • [RFC PATCH] arm: fiq: convert enable/disable_fiq to inline functions   S, Venkatraman
      • [RFC PATCH] arm: fiq: convert enable/disable_fiq to inline functions   Nicolas Pitre
• [PATCH] ARM: mx53_ard: Add support for the accelerometer   Daiane Angolini
  • [PATCH] ARM: mx53_ard: Add support for the accelerometer   Uwe Kleine-König
• [PATCH 00/22] OMAP: voltage cleanup part A   Kevin Hilman
• [PATCH 00/22] OMAP: voltage cleanup part A   Kevin Hilman
  • [PATCH 01/22] OMAP2+: hwmod: remove unused voltagedomain pointer   Kevin Hilman
  • [PATCH 02/22] OMAP2+: voltage: move PRCM mod offets into VC/VP structures   Kevin Hilman
  • [PATCH 03/22] OMAP2+: voltage: move prm_irqst_reg from VP into voltage domain   Kevin Hilman
  • [PATCH 04/22] OMAP2+: voltage: start towards a new voltagedomain layer   Kevin Hilman
  • [PATCH 05/22] OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva"   Kevin Hilman
  • [PATCH 06/22] OMAP3: voltagedomain data: add wakeup domain   Kevin Hilman
  • [PATCH 07/22] OMAP3+: voltage: add scalable flag to voltagedomain   Kevin Hilman
  • [PATCH 08/22] OMAP2+: powerdomain: add voltagedomain to struct powerdomain   Kevin Hilman
  • [PATCH 09/22] OMAP2: add voltage domains and connect to powerdomains   Kevin Hilman
  • [PATCH 10/22] OMAP3: powerdomain data: add voltage domains   Kevin Hilman
  • [PATCH 11/22] OMAP4: powerdomain data: add voltage domains   Kevin Hilman
  • [PATCH 12/22] OMAP2+: powerdomain: add voltage domain lookup during register   Kevin Hilman
  • [PATCH 13/22] OMAP2+: voltage: keep track of powerdomains in each voltagedomain   Kevin Hilman
  • [PATCH 14/22] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer   Kevin Hilman
  • [PATCH 15/22] OMAP2+: voltage: move VC into struct voltagedomain, misc. renames   Kevin Hilman
  • [PATCH 16/22] OMAP2+: voltage: enable VC bypass scale method when VC is initialized   Kevin Hilman
  • [PATCH 17/22] OMAP2+: voltage: split out voltage processor (VP) code into new layer   Kevin Hilman
  • [PATCH 18/22] OMAP2+: VC: support PMICs with separate voltage and command registers   Kevin Hilman
  • [PATCH 19/22] OMAP2+: add PRM VP functions for checking/clearing VP TX done status   Kevin Hilman
  • [PATCH 20/22] OMAP3+ VP: replace transaction done check/clear with VP ops   Kevin Hilman
  • [PATCH 21/22] OMAP2+: PRM: add register access functions for VC/VP   Kevin Hilman
  • [PATCH 22/22] OMAP3+: voltage: convert to PRM register access functions   Kevin Hilman
• [PATCH 00/10] OMAP: voltage cleanup part B: VC cleanup   Kevin Hilman
  • [PATCH 01/10] OMAP3+: VC: cleanup i2c slave address configuration   Kevin Hilman
  • [PATCH 02/10] OMAP3+: VC: cleanup PMIC register address configuration   Kevin Hilman
• [PATCH 00/12] OMAP: voltage cleanup part C: VP cleanup   Kevin Hilman
  • [PATCH 01/12] OMAP3+: VP: cleanup: move VP instance into voltdm, misc. renames   Kevin Hilman
  • [PATCH 02/12] OMAP3+: voltage: remove unneeded debugfs interface   Kevin Hilman
  • [PATCH 03/12] OMAP3+: VP: struct omap_vp_common: replace shift with __ffs(mask)   Kevin Hilman
  • [PATCH 04/12] OMAP3+: VP: move SoC-specific sys clock rate retreival late init   Kevin Hilman
  • [PATCH 05/12] OMAP3+: VP: move timing calculation/config into VP init   Kevin Hilman
  • [PATCH 06/12] OMAP3+: VP: create VP helper function for updating error gain   Kevin Hilman
  • [PATCH 07/12] OMAP3+: VP: remove omap_vp_runtime_data   Kevin Hilman
  • [PATCH 08/12] OMAP3+: VP: move voltage scale function pointer into struct voltagedomain   Kevin Hilman
  • [PATCH 09/12] OMAP: VP: Explicitly mask VPVOLTAGE field   Kevin Hilman
  • [PATCH 10/12] OMAP3+: VP: update_errorgain(): return error if VP   Kevin Hilman
  • [PATCH 11/12] OMAP3+: VP: remove unused omap_vp_get_curr_volt()   Kevin Hilman
  • [PATCH 12/12] OMAP3+: VP: combine setting init voltage into common function   Kevin Hilman
• [PATCH 0/7] OMAP: voltage cleanup part D: voltage domain   Kevin Hilman
  • [PATCH 1/7] OMAP3+: voltage: rename scale and reset functions using voltdm_ prefix   Kevin Hilman
  • [PATCH 2/7] OMAP3+: voltage: move/rename curr_volt from vdd_info into struct voltagedomain   Kevin Hilman
  • [PATCH 3/7] OMAP3+: voltdm: final removal of omap_vdd_info   Kevin Hilman
  • [PATCH 4/7] OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage   Kevin Hilman
  • [PATCH 5/7] OMAP3+: voltage: update nominal voltage in voltdm_scale() not VC post-scale   Kevin Hilman
  • [PATCH 6/7] OMAP2+: VC: more registers are per-channel starting with OMAP5   Kevin Hilman
  • [PATCH 7/7] omap: voltage: add a stub header file for external/regulator use   Kevin Hilman
• [PATCH 0/5] OMAP: voltage cleanup part E: TWL6030 PMIC fixes   Kevin Hilman
  • [PATCH 1/5] OMAP4: PM: TWL6030: fix voltage conversion formula   Kevin Hilman
  • [PATCH 2/5] OMAP4: PM: TWL6030: fix uv to voltage for >0x39   Kevin Hilman
  • [PATCH 3/5] OMAP4: PM: TWL6030: address 0V conversions   Kevin Hilman
  • [PATCH 4/5] OMAP4: PM: TWL6030: fix ON/RET/OFF voltages   Kevin Hilman
  • [PATCH 5/5] OMAP4: PM: TWL6030: add cmd register   Kevin Hilman
• [PATCH] leds: kill CONFIG_LEDS_CLASS option   Bryan Wu
  • [PATCH] leds: kill CONFIG_LEDS_CLASS option   Nicolas Pitre
    • [PATCH] leds: kill CONFIG_LEDS_CLASS option   Richard Purdie
      • [PATCH] leds: kill CONFIG_LEDS_CLASS option   Bryan Wu
      • [PATCH] leds: kill CONFIG_LEDS_CLASS option   Richard Purdie
• [GIT PULL] arm-soc fixes for 3.1-rc4   Arnd Bergmann
• [PATCH] ARM: msm: defconfigs for Qualcomm dev boards   David Brown
  • [PATCH] ARM: msm: defconfigs for Qualcomm dev boards   Arnd Bergmann
• [PATCH] at91/usb: always provide all the clocks   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] at91/usb: always provide all the clocks   ABRAHAM, KISHON VIJAY
• [PATCH] ARM: mx25: Fix build by providing MX25_IIM_BASE_ADDR definition   Fabio Estevam
  • [PATCH] ARM: mx25: Fix build by providing MX25_IIM_BASE_ADDR definition   Jason Liu
• Kernel panic in 2.6.35.12 kernel   Kautuk Consul
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Grant Likely
  • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Igor Grinberg
    • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Grant Likely
      • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Igor Grinberg
      • [Ksummit-2011-discuss] Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Chris Ball
  • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Nicolas Ferre
  • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Wolfram Sang
  • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   David Brown
  • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Paul Walmsley
  • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Olof Johansson
    • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Stephen Warren
    • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Marek Szyprowski
  • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Pavel Machek
    • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Marek Vasut
      • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Bryan Wu
      • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Marek Vasut
      • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Bryan Wu
      • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Grant Likely
  • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Bryan Wu
    • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Marek Vasut
      • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Bryan Wu
      • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Marek Vasut
      • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Eric Miao
  • Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Marc Zyngier
• [GIT PULL v2] OMAP: clock/powerdomain/clockdomain/hwmod: fixes for 3.1-rc   Paul Walmsley
• [PATCH 0/3] make reinitialization of ARM core components possible   Shawn Guo
  • [PATCH 1/3] ARM: cache-l2x0: make the reinitialization possible   Shawn Guo
    • [PATCH 1/3] ARM: cache-l2x0: make the reinitialization possible   Barry Song
      • [PATCH 1/3] ARM: cache-l2x0: make the reinitialization possible   Shawn Guo
      • [PATCH 1/3] ARM: cache-l2x0: make the reinitialization possible   Barry Song
      • [PATCH 1/3] ARM: cache-l2x0: make the reinitialization possible   Barry Song
  • [PATCH 2/3] ARM: GIC: add gic_reinit() function to help ARM resume   Shawn Guo
    • [PATCH 2/3] ARM: GIC: add gic_reinit() function to help ARM resume   Rob Herring
      • [PATCH 2/3] ARM: GIC: add gic_reinit() function to help ARM resume   Shawn Guo
      • [PATCH 2/3] ARM: GIC: add gic_reinit() function to help ARM resume   Shawn Guo
  • [PATCH 3/3] ARM: smp_scu: remove __init annotation from scu_enable()   Shawn Guo
• [PATCH 1/2] ARM imx53: add pwm devices support   jason.chen at freescale.com
  • [PATCH 2/2] ARM: mx53/loco: add pwm backlight device   jason.chen at freescale.com
    • [PATCH 2/2] ARM: mx53/loco: add pwm backlight device   Eric Miao
  • [PATCH 1/2] ARM imx53: add pwm devices support   Eric Miao
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Richard Zhu
  • [PATCH V7 3/5] MX53 Enable the AHCI SATA on MX53 ARD board   Richard Zhu
  • [PATCH V7 5/5] MX53 Enable the AHCI SATA on MX53 SMD board   Richard Zhu
  • [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Wolfram Sang
  • [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Hector Oron
    • [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Richard Zhu
      • [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Hector Oron
      • [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Richard Zhu
• [PATCH V7 2/5] ahci_plt Add the board_ids and pi refer to different features   Richard Zhu
• [PATCH V7 4/5] MX53 Enable the AHCI SATA on MX53 LOCO board   Richard Zhu
• rmk/fixes branch   Will Deacon
  • rmk/fixes branch   Russell King - ARM Linux
    • rmk/fixes branch   Will Deacon
• [V2 1/2] ARM imx53: add pwm devices support   jason.chen at freescale.com
• [PATCH-V2 1/2] ARM imx53: add pwm devices support   jason.chen at freescale.com
  • [PATCH-V2 2/2] ARM: mx53/loco: add pwm backlight device   jason.chen at freescale.com
    • [PATCH-V2 2/2] ARM: mx53/loco: add pwm backlight device   Russell King - ARM Linux
      • 答复: [PATCH-V2 2/2] ARM: mx53/loco: add pwm backlight device   Chen Jie-B02280
• [PATCH] mmc: core: eMMC4.5 Add the timeout for switch   Girish K S
  • [PATCH] mmc: core: eMMC4.5 Add the timeout for switch   Kukjin Kim
• Merging Cadence macb/gem patches   Jamie Iles
• [PATCH 0/7] gpio/samsung: Add support Samsung GPIO with gpio-samsung.c   Kukjin Kim
  • [PATCH 1/7 (RE-SEND)] gpio/s3c24xx: move gpio driver into drivers/gpio/   Kukjin Kim
  • [PATCH 2/7 (RE-SEND)] gpio/s3c64xx: move gpio driver into drivers/gpio/   Kukjin Kim
  • [PATCH 3/7 (RE-SEND)] gpio/s5p64x0: move gpio driver into drivers/gpio/   Kukjin Kim
  • [PATCH 4/7] gpio/samsung: Remove useless old Samsung related GPIO drivers   Kukjin Kim
  • [PATCH 5/7] gpio/samsung: Added gpio-samsung.c to support Samsung GPIOs   Kukjin Kim
  • [PATCH 6/7] ARM: SAMSUNG: Update the name of regarding Samsung GPIO   Kukjin Kim
  • [PATCH 7/7] ARM: SAMSUNG: Remove useless Samsung GPIO related CONFIGs   Kukjin Kim
• [PATCH 4/6] DMA: PL330: Add device tree support   Rob Herring
  • [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
    • [PATCH 4/6] DMA: PL330: Add device tree support   Rob Herring
      • [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
      • [PATCH 4/6] DMA: PL330: Add device tree support   Rob Herring
• [PATCH v3] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   ming.lei at canonical.com
  • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Alan Stern
  • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Mark Salter
    • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Alan Stern
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Mark Salter
    • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Will Deacon
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Greg KH
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Will Deacon
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Chen Peter-B29397
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Will Deacon
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Chen Peter-B29397
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Mark Salter
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Will Deacon
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Mark Salter
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Marc Zyngier
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Marc Dietrich
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Nicolas Pitre
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Ming Lei
• Outstanding Tegra I2C patches   Stephen Warren
• [PATCH 1/2 RESEND] OMAP2+: pm: fix typos   Johan Hovold
  • [PATCH 2/2 RESEND] OMAP2+: pm: clean up error messages   Johan Hovold
    • [PATCH 2/2 RESEND] OMAP2+: pm: clean up error messages   Kevin Hilman
  • [PATCH 1/2 RESEND] OMAP2+: pm: fix typos   Kevin Hilman
• [PATCH REPOST 0/3] i2c: tegra: Outstanding patches   Stephen Warren
  • [PATCH REPOST 1/3] i2c: Tegra: Add of_match_table   Stephen Warren
  • [PATCH REPOST 2/3] i2c: i2c-tegra: add I2C_FUNC_SMBUS_EMUL   Stephen Warren
  • [PATCH REPOST 3/3] i2c: tegra: fix possible race condition after tx   Stephen Warren
• [PATCH 1/3] arm/dt: Tegra: Update SDHCI nodes to match bindings   Stephen Warren
  • [PATCH 2/3] mmc: sdhci-tegra: Add 8-bit support to device tree binding.   Stephen Warren
  • [PATCH 3/3] arm/dt: Tegra: Add support-bit to SDHCI nodes   Stephen Warren
    • [PATCH 3/3] arm/dt: Tegra: Add support-bit to SDHCI nodes   Stephen Warren
  • [PATCH 1/3] arm/dt: Tegra: Update SDHCI nodes to match bindings   Chris Ball
    • [PATCH 1/3] arm/dt: Tegra: Update SDHCI nodes to match bindings   Stephen Warren
      • [PATCH 1/3] arm/dt: Tegra: Update SDHCI nodes to match bindings   Chris Ball
• [PATCH] musb_debugfs.c: remove unneeded includes on ARM   Nicolas Pitre
  • [PATCH] musb_debugfs.c: remove unneeded includes on ARM   Felipe Balbi
• Arm device tree wonder   Scott Wood
• [PATCH] ARM: S3C64XX: Fix clkdev device names for I2C clocks   Mark Brown
  • [PATCH] ARM: S3C64XX: Fix clkdev device names for I2C clocks   Kyungmin Park
    • [PATCH] ARM: S3C64XX: Fix clkdev device names for I2C clocks   Mark Brown
      • [PATCH] ARM: S3C64XX: Fix clkdev device names for I2C clocks   Thomas Abraham
      • [PATCH] ARM: S3C64XX: Fix clkdev device names for I2C clocks   Mark Brown
• [GIT PULL] msm: initial devicetree support   David Brown
• [GIT PULL] msm: devboard defconfigs   David Brown
  • [GIT PULL] msm: devboard defconfigs   Nicolas Pitre
    • [GIT PULL] msm: devboard defconfigs   David Brown
• [PATCH] ARM: EXYNOS4: iommu: Add IOMMU API and moved to drivers/iommu   Kukjin Kim
• Arm device tree wonder   Paul Walmsley
• [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Rob Clark
  • [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Joonyoung Shim
  • [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
    • [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Rob Clark
• [PATCH-V3 1/2] ARM imx53: add pwm devices support   jason.chen at freescale.com
• [PATCH-V3 2/2] ARM: mx53/loco: add pwm backlight device   jason.chen at freescale.com
• [PATCH v3 1/4] ARM: CSR: add rtc i/o bridge interface for SiRFprimaII   Barry Song
• [PATCH v3 2/4] ARM: CSR: add PM sleep entry for SiRFprimaII   Barry Song
• [PATCH V7 0/5] imx53 ahci driver v7   Richard Zhu
  • [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Richard Zhu
    • [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Arnaud Patard (Rtp)
      • [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Eric Miao
  • [PATCH V7 2/5] ahci_plt Add the board_ids and pi refer to different features   Richard Zhu
    • [PATCH V7 2/5] ahci_plt Add the board_ids and pi refer to different features   Eric Miao
  • [PATCH V7 3/5] MX53 Enable the AHCI SATA on MX53 ARD board   Richard Zhu
  • [PATCH V7 4/5] MX53 Enable the AHCI SATA on MX53 LOCO board   Richard Zhu
  • [PATCH V7 5/5] MX53 Enable the AHCI SATA on MX53 SMD board   Richard Zhu
  • [PATCH V7 0/5] imx53 ahci driver v7   Arnaud Patard (Rtp)
    • [PATCH V7 0/5] imx53 ahci driver v7   Richard Zhu
• [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
• [PATCH] dmaengine: amba-pl08x: make filter check that the channel is owned by pl08x   Russell King - ARM Linux
  • [PATCH] dmaengine: amba-pl08x: make filter check that the channel is owned by pl08x   Michał Mirosław
• [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Thomas Hellstrom
  • [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
• [PATCH 1/2] ARM: S3C6410: Use device names for both I2C clocks   Mark Brown
  • [PATCH 2/2] ARM: SAMSUNG: Fix mask for S3C64xx CPU IDs   Mark Brown
• [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Ohad Ben-Cohen
  • [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Laurent Pinchart
  • [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Roedel, Joerg
    • [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Laurent Pinchart
      • [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Ohad Ben-Cohen
• [PATCH 0/5] Add high resolution generic time support for S3C64xx   Tomasz Figa
  • [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Tomasz Figa
    • [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Mark Brown
      • [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Tomasz Figa
      • [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Kukjin Kim
      • [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Kyungmin Park
  • [PATCH 2/5] ARM: s3c64xx: Add generic high resolution time support using PWM timers.   Tomasz Figa
  • [PATCH 3/5] ARM: Samsung: pwm: Exclude timer 3 on S3C64xx if generic time is enabled.   Tomasz Figa
  • [PATCH 4/5] ARM: s3c64xx: Move all machines to s3c64xx_timer.   Tomasz Figa
  • [PATCH 5/5] ARM: s3c64xx: Add optional local sched_clock implementation.   Tomasz Figa
• [PATCH v6 00/25] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
  • [PATCH v6 01/25] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
  • [PATCH v6 02/25] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
  • [PATCH v6 03/25] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
  • [PATCH v6 04/25] gpio/omap: fix pwrdm_post_transition call sequence   Tarun Kanti DebBarma
  • [PATCH v6 05/25] gpio/omap: handle save/restore context in GPIO driver   Tarun Kanti DebBarma
  • [PATCH v6 06/25] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
  • [PATCH v6 07/25] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
  • [PATCH v6 08/25] gpio/omap: further cleanup using wkup_en register   Tarun Kanti DebBarma
  • [PATCH v6 09/25] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
  • [PATCH v6 10/25] gpio/omap: remove hardcoded offsets in context save/restore   Tarun Kanti DebBarma
  • [PATCH v6 11/25] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
  • [PATCH v6 12/25] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
  • [PATCH v6 13/25] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
  • [PATCH v6 14/25] gpio/omap: remove unnecessary bit-masking for read access   Tarun Kanti DebBarma
  • [PATCH v6 15/25] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
  • [PATCH v6 16/25] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
  • [PATCH v6 17/25] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
  • [PATCH v6 18/25] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
  • [PATCH v6 19/25] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
  • [PATCH v6 20/25] gpio/omap: skip operations in runtime callbacks   Tarun Kanti DebBarma
  • [PATCH v6 21/25] gpio/omap: remove omap_gpio_save_context overhead   Tarun Kanti DebBarma
  • [PATCH v6 22/25] gpio/omap: save and restore debounce registers   Tarun Kanti DebBarma
  • [PATCH v6 23/25] gpio/omap: enable irq at the end of all configuration in restore   Tarun Kanti DebBarma
  • [PATCH v6 24/25] gpio/omap: restore OE only after setting the output level   Tarun Kanti DebBarma
  • [PATCH v6 25/25] gpio/omap: handle set_dataout reg capable IP on restore   Tarun Kanti DebBarma
• [PATCH 2/7] iommu/core: split mapping to page sizes as   Ohad Ben-Cohen
• [PATCH] arm: gic: fix gic_set_affinity   tom.leiming at gmail.com
  • [PATCH] arm: gic: fix gic_set_affinity   Russell King - ARM Linux
• [PATCH 00/14] McBSP cleanup and generalization   Jarkko Nikula
  • [PATCH 01/14] omap: mcbsp: Remove omap device API   Jarkko Nikula
  • [PATCH 03/14] omap: mcbsp: Move out omap_mcbsp_register_board_cfg from plat-omap/devices.c   Jarkko Nikula
  • [PATCH 04/14] omap: mcbsp: Implement generic register access   Jarkko Nikula
  • [PATCH 05/14] omap: mcbsp: Make wakeup control generic   Jarkko Nikula
  • [PATCH 06/14] omap: mcbsp: Make tranceiver configuration control register access generic   Jarkko Nikula
  • [PATCH 07/14] omap: mcbsp: Make threshold based transfer code generic   Jarkko Nikula
  • [PATCH 09/14] omap: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c   Jarkko Nikula
  • [PATCH 10/14] omap: mcbsp: Cleanup sidetone control initialization and make it generic   Jarkko Nikula
  • [PATCH 11/14] omap: mcbsp: Update mcbsp.h include dependencies   Jarkko Nikula
  • [PATCH 12/14] omap: mcbsp: Move address definitions to arch/arm/mach-omap1/mcbsp.c   Jarkko Nikula
  • [PATCH 13/14] omap: mcbsp: Start generalize omap2_mcbsp_set_clks_src   Jarkko Nikula
  • [PATCH 14/14] omap: mcbsp: Start generalize signal muxing functions   Jarkko Nikula
• [PATCH 02/14] omap: mcbsp: Remove unused variables from platform data   Jarkko Nikula
• [PATCH 08/14] omap: mcbsp: Use per instance register cache size   Jarkko Nikula
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Will Deacon
  • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Rob Herring
    • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Mark Salter
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Rob Herring
      • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Mark Salter
    • [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Will Deacon
• [PATCH v2 00/24] C6X: New architecture patch set   Mark Salter
  • [PATCH 08/24] C6X: process management   Mark Salter
  • [PATCH 09/24] C6X: signal management   Mark Salter
  • [PATCH 11/24] C6X: interrupt handling   Mark Salter
  • [PATCH 12/24] C6X: syscalls   Mark Salter
  • [PATCH 14/24] C6X: clocks   Mark Salter
  • [PATCH 15/24] C6X: cache control   Mark Salter
  • [PATCH 19/24] C6X: library code   Mark Salter
  • [PATCH 21/24] C6X: specific SoC support   Mark Salter
  • [PATCH v2 00/24] C6X: New architecture patch set   Mark Salter
• [PATCH 01/24] fix default __strnlen_user macro   Mark Salter
  • [PATCH 01/24] fix default __strnlen_user macro   Ryan Mallon
• [PATCH 02/24] fixed generic page.h for non-zero PAGE_OFFSET   Mark Salter
• [PATCH 03/24] add ELF machine define for TI C6X DSPs   Mark Salter
• [PATCH 04/24] C6X: build infrastructure   Mark Salter
• [PATCH 05/24] C6X: early boot code   Mark Salter
• [PATCH 06/24] C6X: devicetree   Mark Salter
• [PATCH 07/24] C6X: memory management and DMA support   Mark Salter
• [PATCH 10/24] C6X: time management   Mark Salter
• [PATCH 13/24] C6X: traps   Mark Salter
• [PATCH 16/24] C6X: loadable module support   Mark Salter
• [PATCH 17/24] C6X: ptrace support   Mark Salter
• [PATCH 18/24] C6X: headers   Mark Salter
• [PATCH 20/24] C6X: general SoC support   Mark Salter
• [PATCH 22/24] C6X: EMIF - External Memory Interface   Mark Salter
• [PATCH 23/24] C6X: Power and Sleep Controller   Mark Salter
• [PATCH 0/3] RFC: addition to DMA API   Mark Salter
  • [PATCH 1/3] add dma_coherent_write_sync to DMA API   Mark Salter
    • [PATCH 1/3] add dma_coherent_write_sync to DMA API   Josh Cartwright
  • [PATCH 3/3] add dma_coherent_write_sync calls to USB EHCI driver   Mark Salter
    • [PATCH 3/3] add dma_coherent_write_sync calls to USB EHCI driver   Ming Lei
  • [PATCH 0/3] RFC: addition to DMA API   Ming Lei
    • [PATCH 0/3] RFC: addition to DMA API   Alan Stern
      • [PATCH 0/3] RFC: addition to DMA API   Ming Lei
• [PATCH 2/3] define ARM-specific dma_coherent_write_sync   Mark Salter
• [PATCH RESEND] video: nuc900fb: remove include of mach/clkdev.h   Axel Lin
• [PATCH v2 0/7] Initial Calxeda Highbank support   Rob Herring
  • [PATCH v2 2/7] ARM: highbank: add devicetree source   Rob Herring
  • [PATCH v2 3/7] ARM: add Highbank core platform support   Rob Herring
  • [PATCH v2 4/7] MAINTAINERS: add Calxeda Highbank ARM platform   Rob Herring
  • [PATCH v2 5/7] ARM: highbank: add SMP support   Rob Herring
  • [PATCH v2 6/7] ARM: highbank: Add cpu hotplug support   Rob Herring
  • [PATCH v2 7/7] ARM: highbank: add suspend support   Rob Herring
• [PATCH 1/7] ARM: l2x0: add empty l2x0_of_init   Rob Herring
  • [PATCH 1/7] ARM: l2x0: add empty l2x0_of_init   Barry Song
    • [PATCH 1/7] ARM: l2x0: add empty l2x0_of_init   Rob Herring
• [PATCH v2] pinmux: add a driver for the CSR SiRFprimaII pinmux   Barry Song