[PATCH 1/2] arm: exynos4: Add a new Exynos4 device tree enabled machine
Grant Likely
grant.likely at secretlab.ca
Mon Aug 1 12:54:56 EDT 2011
On Mon, Aug 01, 2011 at 05:20:36PM +0100, Thomas Abraham wrote:
> Add a new basic Exynos4 machine with device tree support that can boot
> on a Exynos4 processor based board and bring up the console. This acts
> as a stating point to add device tree support for Exynos4 architecture.
>
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
Hi Thomas,
As discussed f2f at Linaro Connect, we'll defer this board support
patch to v3.2, and use this week to eliminate the 'special' uart
handling code.
g.
> ---
> arch/arm/mach-exynos4/Kconfig | 10 +++
> arch/arm/mach-exynos4/Makefile | 1 +
> arch/arm/mach-exynos4/mach-exynos4-dt.c | 118 +++++++++++++++++++++++++++++++
> 3 files changed, 129 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c
>
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index 0c77ab9..c29de4e 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -218,6 +218,16 @@ config MACH_NURI
> help
> Machine support for Samsung Mobile NURI Board.
>
> +config MACH_EXYNOS4_DT
> + bool "Samsung Exynos4 Machine using device tree"
> + select CPU_EXYNOS4210
> + select USE_OF
> + select S3C_DEV_HSMMC
> + select S3C_DEV_HSMMC2
> + select EXYNOS4_SETUP_SDHCI
> + help
> + Machine support for Samsung Exynos4 machine with device tree enabled.
> +
> endmenu
>
> comment "Configuration for HSMMC bus width"
> diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
> index b7fe1d7..d2bf5bf 100644
> --- a/arch/arm/mach-exynos4/Makefile
> +++ b/arch/arm/mach-exynos4/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
> obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
> obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
> obj-$(CONFIG_MACH_NURI) += mach-nuri.o
> +obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
>
> # device support
>
> diff --git a/arch/arm/mach-exynos4/mach-exynos4-dt.c b/arch/arm/mach-exynos4/mach-exynos4-dt.c
> new file mode 100644
> index 0000000..8e9d2d7
> --- /dev/null
> +++ b/arch/arm/mach-exynos4/mach-exynos4-dt.c
> @@ -0,0 +1,118 @@
> +/*
> + * Samsung's Exynos4 device tree enabled machine.
> + *
> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + * Copyright (c) 2010-2011 Linaro Ltd.
> + * www.linaro.org
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/serial_core.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/of_platform.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +
> +#include <asm/mach/arch.h>
> +#include <asm/mach-types.h>
> +
> +#include <plat/regs-serial.h>
> +#include <plat/exynos4.h>
> +#include <plat/cpu.h>
> +#include <plat/sdhci.h>
> +
> +#include <mach/map.h>
> +
> +/* Following are default values for UCON, ULCON and UFCON UART registers */
> +#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
> + S3C2410_UCON_RXILEVEL | \
> + S3C2410_UCON_TXIRQMODE | \
> + S3C2410_UCON_RXIRQMODE | \
> + S3C2410_UCON_RXFIFO_TOI | \
> + S3C2443_UCON_RXERR_IRQEN)
> +
> +#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
> + S5PV210_UFCON_TXTRIG4 | \
> + S5PV210_UFCON_RXTRIG4)
> +
> +static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
> + [0] = {
> + .hwport = 0,
> + .ucon = SMDKV310_UCON_DEFAULT,
> + .ufcon = SMDKV310_UFCON_DEFAULT,
> + },
> + [1] = {
> + .hwport = 1,
> + .ucon = SMDKV310_UCON_DEFAULT,
> + .ufcon = SMDKV310_UFCON_DEFAULT,
> + },
> + [2] = {
> + .hwport = 2,
> + .ucon = SMDKV310_UCON_DEFAULT,
> + .ufcon = SMDKV310_UFCON_DEFAULT,
> + },
> + [3] = {
> + .hwport = 3,
> + .ucon = SMDKV310_UCON_DEFAULT,
> + .ufcon = SMDKV310_UFCON_DEFAULT,
> + },
> +};
> +
> +/*
> + * The following lookup table is used to override device names when devices
> + * are registered from device tree. This is temporarily added to enable
> + * device tree support addition for the Exynos4 architecture.
> + *
> + * For drivers that require platform data to be provided from the machine
> + * file, a platform data pointer can also be supplied along with the
> + * devices names. Usually, the platform data elements that cannot be parsed
> + * from the device tree by the drivers (example: function pointers) are
> + * supplied. But it should be noted that this is a temporary mechanism and
> + * at some point, the drivers should be capable of parsing all the platform
> + * data from the device tree.
> + */
> +static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
> + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", EXYNOS4_PA_HSMMC(2),
> + "s3c-sdhci.2", &s3c_hsmmc2_def_platdata),
> + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", EXYNOS4_PA_HSMMC(0),
> + "s3c-sdhci.0", &s3c_hsmmc0_def_platdata),
> + {},
> +};
> +
> +static void __init exynos4_dt_map_io(void)
> +{
> + s5p_init_io(NULL, 0, S5P_VA_CHIPID);
> + s3c24xx_init_clocks(24000000);
> + s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
> +}
> +
> +static const struct of_device_id intc_of_match[] __initconst = {
> + { .compatible = "samsung,exynos4-gic", },
> + {},
> +};
> +
> +static void __init exynos4_dt_machine_init(void)
> +{
> + irq_domain_generate_simple(intc_of_match, EXYNOS4_PA_GIC_DIST, 0);
> + of_platform_populate(NULL, of_default_bus_match_table,
> + exynos4_auxdata_lookup, NULL);
> +}
> +
> +static char const *exynos4_dt_compat[] __initdata = {
> + "samsung,exynos4",
> + NULL
> +};
> +
> +DT_MACHINE_START(SMDKV310, "Samsung Exynos4 DT")
> + /* Maintainer: Kukjin Kim <kgene.kim at samsung.com> */
> + .init_irq = exynos4_init_irq,
> + .map_io = exynos4_dt_map_io,
> + .init_machine = exynos4_dt_machine_init,
> + .timer = &exynos4_timer,
> + .dt_compat = exynos4_dt_compat,
> +MACHINE_END
> --
> 1.7.4.1
>
More information about the linux-arm-kernel
mailing list