[PATCH] ep93xx: clock.c: fix all checkpatch.pl issues

[Ryan Mallon]

On 10/08/11 07:11, H Hartley Sweeten wrote:
> This fixes all the checkpatch.pl errors and warnings found in this file.
>
>   #201: ERROR: space required after that ',' (ctx:VxV)
>   #201: ERROR: space required after that ',' (ctx:VxV)
>   #250: WARNING: line over 80 characters
>   #281: WARNING: line over 80 characters
>   #361: WARNING: line over 80 characters
>   #435: ERROR: trailing whitespace
>   #438: ERROR: trailing whitespace
>   #449: ERROR: trailing whitespace
>   #451: ERROR: trailing whitespace
>
>   total: 6 errors, 3 warnings, 562 lines checked
>
> Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
> Cc: Ryan Mallon <rmallon at gmail.com>
>
> ---
>
> diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
> index ca4de71..14dba95 100644
> --- a/arch/arm/mach-ep93xx/clock.c
> +++ b/arch/arm/mach-ep93xx/clock.c
> @@ -198,7 +198,7 @@ static struct clk clk_m2m1 = {
>  	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
>  };
>  
> -#define INIT_CK(dev,con,ck)					\
> +#define INIT_CK(dev, con, ck)					\
>  	{ .dev_id = dev, .con_id = con, .clk = ck }

Okay.

>  
>  static struct clk_lookup clocks[] = {
> @@ -247,7 +247,8 @@ static void __clk_enable(struct clk *clk)
>  			v = __raw_readl(clk->enable_reg);
>  			v |= clk->enable_mask;
>  			if (clk->sw_locked)
> -				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
> +				ep93xx_syscon_swlocked_write(v,
> +

I think this makes the code arguably less readable. The line only just
extends over 80 characters.

> 						clk->enable_reg);
>  			else
>  				__raw_writel(v, clk->enable_reg);
>  		}
> @@ -278,7 +279,8 @@ static void __clk_disable(struct clk *clk)
>  			v = __raw_readl(clk->enable_reg);
>  			v &= ~clk->enable_mask;
>  			if (clk->sw_locked)
> -				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
> +				ep93xx_syscon_swlocked_write(v,
> +						clk->enable_reg);

Same here.

>  			else
>  				__raw_writel(v, clk->enable_reg);
>  		}
> @@ -358,7 +360,7 @@ static int calc_clk_div(struct clk *clk, unsigned long rate,
>  	int i, found = 0, __div = 0, __pdiv = 0;
>  
>  	/* Don't exceed the maximum rate */
> -	max_rate = max3(clk_pll1.rate / 4, clk_pll2.rate / 4, clk_xtali.rate / 4);
> +	max_rate = max3(clk_pll1.rate/4, clk_pll2.rate/4, clk_xtali.rate/4);

Don't delete the spaces around the operators. Again, this line is only
just over 80 characters. I think its okay as is. If you must fix it,
break on one of the commas instead.

>  	rate = min(rate, max_rate);
>  
>  	/*
> @@ -432,35 +434,32 @@ static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate)
>  	unsigned val = __raw_readl(clk->enable_reg);
>  
>  	if (rate == clk_i2s_mclk.rate / 2)
> -		ep93xx_syscon_swlocked_write(val & ~EP93XX_I2SCLKDIV_SDIV, 
> -					     clk->enable_reg);
> +		val &= ~EP93XX_I2SCLKDIV_SDIV;
>  	else if (rate == clk_i2s_mclk.rate / 4)
> -		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_SDIV, 
> -					     clk->enable_reg);
> +		val |= EP93XX_I2SCLKDIV_SDIV;
>  	else
>  		return -EINVAL;
>  
> +	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
>  	clk_i2s_sclk.rate = rate;
>  	return 0;

This change is good.

>  }
>  
>  static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate)
>  {
> -	unsigned val = __raw_readl(clk->enable_reg) & 
> +	unsigned val = __raw_readl(clk->enable_reg) &
>  		~EP93XX_I2SCLKDIV_LRDIV_MASK;
> -	
> +
>  	if (rate == clk_i2s_sclk.rate / 32)
> -		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV32,
> -					     clk->enable_reg);
> +		val |= EP93XX_I2SCLKDIV_LRDIV32;
>  	else if (rate == clk_i2s_sclk.rate / 64)
> -		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV64,
> -					     clk->enable_reg);
> +		val |= EP93XX_I2SCLKDIV_LRDIV64;
>  	else if (rate == clk_i2s_sclk.rate / 128)
> -		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV128,
> -					     clk->enable_reg);
> +		val |= EP93XX_I2SCLKDIV_LRDIV128;
>  	else
>  		return -EINVAL;
>  
> +	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
>  	clk_i2s_lrclk.rate = rate;
>  	return 0;
>  }
This is good too.

~Ryan