[PATCH v2 0/8] Clean up MXC and MXS mach/gpio.h
Shawn Guo
shawn.guo at linaro.org
Sat Aug 13 12:13:59 EDT 2011
As one step to single image for multiple platforms, mach/gpio.h needs
to be removed from asm/gpio.h. The patch set cleans up MXC and MXS
mach/gpio.h to an empty header.
It's based on v3.1-rc1 plus rmk's patch series below.
[PATCH 00/13] Clean up mach/gpio.h headers
The Ben's fix is on the way to -rc2 through arm-soc tree.
Grant, Sascha,
Can you please review the series and give comments or your ack tag?
Regards,
Shawn
Changes since v1:
* Add patches #7 and #8 to clean up mxs mach/gpio.h
* Leave run-time gpio_to_irq() calls there and only convert these
in static initializers to IMX_GPIO_TO_IRQ()
* Mark the empty headers with /* empty */
Ben Dooks (1):
ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage
Shawn Guo (7):
arm/mxc: do not use gpio_to_irq() for static initializers
gpio/mxc: add .to_irq for gpio chip
arm/mxc: remove gpio_to_irq() from mach/gpio.h
gpio/mxc: move irq_to_gpio() into gpio-mxc driver
arm/mxc: move IMX_GPIO_NR into mach/hardware.h
gpio/mxs: move irq_to_gpio() into gpio-mxs driver
arm/mxs: move MXS_GPIO_NR into mach/mxs.h
arch/arm/mach-imx/mach-cpuimx35.c | 2 +-
arch/arm/mach-imx/mach-mx27_3ds.c | 2 +-
arch/arm/mach-imx/mach-vpr200.c | 2 +-
arch/arm/mach-mx5/board-cpuimx51.c | 8 +++---
arch/arm/mach-mx5/board-cpuimx51sd.c | 4 +-
arch/arm/mach-mx5/board-mx53_ard.c | 4 +-
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 2 +-
arch/arm/mach-mx5/mx51_efika.c | 2 +-
arch/arm/mach-mxs/include/mach/gpio.h | 28 +--------------------
arch/arm/mach-mxs/include/mach/mxs.h | 2 +
arch/arm/plat-mxc/include/mach/gpio.h | 34 +-------------------------
arch/arm/plat-mxc/include/mach/hardware.h | 6 ++++
drivers/gpio/gpio-mxc.c | 12 +++++++++
drivers/gpio/gpio-mxs.c | 2 +
14 files changed, 37 insertions(+), 73 deletions(-)
More information about the linux-arm-kernel
mailing list