GPMI-NAND Status?

Huang Shijie b32955 at freescale.com
Tue Aug 9 02:40:40 EDT 2011


Hi,
> Hi,
>
> On Tue, Aug 9, 2011 at 7:11 AM, Huang Shijie<b32955 at freescale.com>  wrote:
>> Hi Koen:
>>> Anything is good for me.
>>> Could also be useful to make sure we test on the same HW as much as
>>> possible and are using the same source tree.
>>> HW I have:
>>> - mx23evk rev C1
>>> - mx23evk rev B2
>>> - own target hw using mx23 lqfp-128 chip and different type of ddr and
>>> nand.
>>>
>> My test mx23 board is 169BGA package which is different from yours.
>>
>> Could you get the 169BGA package board?
>>
>> I think the DMA timeout is caused by the different package type.
> I suppose my mx23evk is right the same as you have (same revision) and
> this has the bga169 package. My actual target has lqfp128. But on both
> boards I get the same issues.

Could you test my kernel in your side?

I can provide you the sd_loader, kernel.
You can use SD card to store the rootfs.

Best Regards
Huang Shijie
> So I don't think the package type has something to do with the dma
> timeout issue. After all the silicon inside is the same thing.
>
> I'm trying to debug a little further.
>
> Regards,
> Koen
>
>> Best Regards
>> Huang Shijie
>>
>>
>>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>





More information about the linux-arm-kernel mailing list