[PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE

Leo Yan leoy at marvell.com
Tue Aug 23 03:48:54 EDT 2011



On 08/23/2011 10:08 AM, Andres Salomon wrote:
> On Tue, 23 Aug 2011 08:07:41 +0800
> Eric Miao<eric.y.miao at gmail.com>  wrote:
>
>> On Tue, Aug 23, 2011 at 7:47 AM, Andres Salomon<dilinger at queued.net>
>> wrote:
>>> The sram code allocates memory with ioremap, which assumes MT_DEVICE
>>> for memory protections.  This explodes when we map sram for power
>>> management purposes and then attempt to execute it (jump_to_lp_sram)
>>> on the OLPC XO-1.75.  Instead, we want to specify MT_MEMORY, which
>>> doesn't set the L_PTE_XN bit.
>>>
>>> Signed-off-by: Andres Salomon<dilinger at queued.net>
>>> ---
>>>   arch/arm/mach-mmp/sram.c |    4 +++-
>>>   1 files changed, 3 insertions(+), 1 deletions(-)
>>>
>>> Eric, this patch is against the devel branch of your pxa tree.
>>>
>>> diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
>>> index 4304f95..ca4d3c1 100644
>>> --- a/arch/arm/mach-mmp/sram.c
>>> +++ b/arch/arm/mach-mmp/sram.c
>>> @@ -21,6 +21,7 @@
>>>   #include<linux/err.h>
>>>   #include<linux/slab.h>
>>>   #include<linux/genalloc.h>
>>> +#include<asm/mach/map.h>
>>>
>>>   #include<mach/sram.h>
>>>
>>> @@ -87,7 +88,8 @@ static int __devinit sram_probe(struct
>>> platform_device *pdev)
>>>
>>>         info->sram_phys   = (phys_addr_t)res->start;
>>>         info->sram_size   = resource_size(res);
>>> -       info->sram_virt   = ioremap(info->sram_phys,
>>> info->sram_size);
>>> +       info->sram_virt   = __arm_ioremap(info->sram_phys,
>>> info->sram_size,
>>> +                                         MT_MEMORY);
>>
>> I doubt MT_MEMORY is intended for use with __arm_ioremap(). There
>> could be other way around to the L_PTE_XN bit.
>>
>> One other way I'm actually thinking of is to add the SRAM mapping to
>> mmp_map_io(). The difference of SRAM offset/size may result the
>> separation of mmp_map_io() into {pxa168,pxa910,mmp2}_map_io()
>> if necessary.
>>
>
> I guess I don't follow.  I think you're talking about adding it to the
> standard_io_desc array, but that would require having it pre-mapped and
> knowing the virtual address.  Or were you planning to ioremap it?

I missed the L_PTE_XN bit.
The patch is originally for audio sram, so use the ioremap is ok for 
that. But for the internal sram we should need the different mapping 
property.

so far, the standard_io_desc is shared by pxa168/pxa910/mmp2;
we can not add the sram's entry into it for now sram is only dedicated
to mmp2; just like Eric's suggestion, we need mmp2_map_io() only for
mmp2, and add the sram's entries into the structure.
if so, we need transfer the mapped info into the sram module,
and sram module just keep the info and do not need remap it again.

so what's your opinion?



More information about the linux-arm-kernel mailing list