[PATCH 1/5] ARM: davinci: da850, omapl138: introduce shared da850 reference components
Ben Gardiner
bengardiner at nanometrics.ca
Thu Aug 18 17:50:47 EDT 2011
Several of the pieces of the da850 evm reference design board support in
board-da850-evm.c are re-used by the other da850/omapl138 boards. Examples
are boot_params, map_io, preferred-serial-console, davinci_uart_config's
enabled_uarts to name a few.
Introduce an object file to contain these shared pieces for re-use by the
other da850/omapl138 boards. Kick it off with sharing the machine map_io which
before this change was repeated in each of board-da850-evm.c,
board-mityomapl138.c and board-omapl138-hawk.c. Since these machines are all
included in the da8xx_omapl_defconfig, there is benefit to sharing a definition
here.
Signed-off-by: Ben Gardiner <bengardiner at nanometrics.ca>
Reviewed-by: James Nuss <jamesnuss at nanometrics.ca>
---
arch/arm/mach-davinci/Makefile | 3 ++-
arch/arm/mach-davinci/board-da850-evm.c | 8 ++------
arch/arm/mach-davinci/board-mityomapl138.c | 8 ++------
arch/arm/mach-davinci/board-omapl138-hawk.c | 8 ++------
arch/arm/mach-davinci/da850-reference.c | 15 +++++++++++++++
.../mach-davinci/include/mach/da850-reference.h | 14 ++++++++++++++
6 files changed, 37 insertions(+), 19 deletions(-)
create mode 100644 arch/arm/mach-davinci/da850-reference.c
create mode 100644 arch/arm/mach-davinci/include/mach/da850-reference.h
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0b87a1c..9a01441 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -15,7 +15,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o\
+ da850-reference.o
obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o
obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 3d2c0d7..3ee12f3 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -37,6 +37,7 @@
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
+#include <mach/da850-reference.h>
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/aemif.h>
@@ -1257,14 +1258,9 @@ static int __init da850_evm_console_init(void)
console_initcall(da850_evm_console_init);
#endif
-static void __init da850_evm_map_io(void)
-{
- da850_init();
-}
-
MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
.boot_params = (DA8XX_DDR_BASE + 0x100),
- .map_io = da850_evm_map_io,
+ .map_io = da850_reference_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = da850_evm_init,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 606a6f2..c256858 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -25,6 +25,7 @@
#include <mach/common.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
+#include <mach/da850-reference.h>
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/spi.h>
@@ -559,14 +560,9 @@ static int __init mityomapl138_console_init(void)
console_initcall(mityomapl138_console_init);
#endif
-static void __init mityomapl138_map_io(void)
-{
- da850_init();
-}
-
MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
.boot_params = (DA8XX_DDR_BASE + 0x100),
- .map_io = mityomapl138_map_io,
+ .map_io = da850_reference_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = mityomapl138_init,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 67c38d0..5d556cf 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -19,6 +19,7 @@
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
+#include <mach/da850-reference.h>
#include <mach/mux.h>
#define HAWKBOARD_PHY_ID "0:07"
@@ -332,14 +333,9 @@ static int __init omapl138_hawk_console_init(void)
console_initcall(omapl138_hawk_console_init);
#endif
-static void __init omapl138_hawk_map_io(void)
-{
- da850_init();
-}
-
MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
.boot_params = (DA8XX_DDR_BASE + 0x100),
- .map_io = omapl138_hawk_map_io,
+ .map_io = da850_reference_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = omapl138_hawk_init,
diff --git a/arch/arm/mach-davinci/da850-reference.c b/arch/arm/mach-davinci/da850-reference.c
new file mode 100644
index 0000000..67b327b
--- /dev/null
+++ b/arch/arm/mach-davinci/da850-reference.c
@@ -0,0 +1,15 @@
+/*
+ * TI DA850/OMAP-L138 reusable elements of the da850 reference design.
+ *
+ * Copyright (C) 2011 Nanometrics Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <mach/da8xx.h>
+
+void __init da850_reference_map_io(void)
+{
+ da850_init();
+}
diff --git a/arch/arm/mach-davinci/include/mach/da850-reference.h b/arch/arm/mach-davinci/include/mach/da850-reference.h
new file mode 100644
index 0000000..d3beb13
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/da850-reference.h
@@ -0,0 +1,14 @@
+/* Defines for the reusable elements of the da850 reference design.
+ *
+ * Copyright 2011 (c) Nanometrics Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_DAVINCI_DA850_REFERENCE_H
+#define __ASM_ARCH_DAVINCI_DA850_REFERENCE_H
+
+void __init da850_reference_map_io(void);
+
+#endif /* __ASM_ARCH_DAVINCI_DA850_REFERENCE_H */
--
1.7.4.1
More information about the linux-arm-kernel
mailing list