[RFC PATCH 00/10] OMAP: Add DT support for early init OMAP4 devices
Benoit Cousson
b-cousson at ti.com
Wed Aug 24 09:09:06 EDT 2011
Hi Grant, Tony,
Here are a couple of drivers / devices adaptated to DT on OMAP4.
I focused first on devices that used to be initialized before machine_init
time (postcore_initcall most of the time).
The GPIO adaptation is not taking into account the current cleanup done
by Charu / Tarun. It will have to be revisited when the cleanup will
be completed.
Patches are based on for_3.2/3_omap4_dt_base + devicetree/test
and are available here:
git://gitorious.org/omap-pm/linux.git for_3.2/4_omap4_dt_early_devices
Comments are welcome.
Regards,
Benoit
Benoit Cousson (10):
OMAP2+: l3-noc: Add support for device-tree
arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver
documentation/dt: Add l3-noc bindings
arm/dts: OMAP4: Add mpu, dsp and iva nodes
documentation/dt: Add mpu, dsp and iva bindings
hwspinlock: OMAP4: Add spinlock support in DT
documentation/dt: Add spinlock bindings
gpio/omap: Adapt GPIO driver to DT
arm/dts: OMAP4: Add gpio nodes
documentation/dt: Add OMAP GPIO properties
Documentation/devicetree/bindings/arm/omap/dsp.txt | 14 +++
Documentation/devicetree/bindings/arm/omap/iva.txt | 18 ++++
.../devicetree/bindings/arm/omap/l3-noc.txt | 18 ++++
Documentation/devicetree/bindings/arm/omap/mpu.txt | 35 +++++++
.../devicetree/bindings/gpio/gpio-omap.txt | 33 ++++++
.../bindings/hwspinlock/omap-spinlock.txt | 5 +
arch/arm/boot/dts/omap4.dtsi | 105 +++++++++++++++++++-
arch/arm/mach-omap2/Makefile | 6 +-
arch/arm/mach-omap2/devices.c | 2 +
arch/arm/mach-omap2/gpio.c | 2 +
arch/arm/mach-omap2/omap_l3_noc.c | 16 +++-
arch/arm/mach-omap2/pm.c | 5 +-
drivers/gpio/gpio-omap.c | 103 +++++++++++++++++--
drivers/hwspinlock/omap_hwspinlock.c | 11 ++
14 files changed, 359 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/omap/dsp.txt
create mode 100644 Documentation/devicetree/bindings/arm/omap/iva.txt
create mode 100644 Documentation/devicetree/bindings/arm/omap/l3-noc.txt
create mode 100644 Documentation/devicetree/bindings/arm/omap/mpu.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-omap.txt
create mode 100644 Documentation/devicetree/bindings/hwspinlock/omap-spinlock.txt
More information about the linux-arm-kernel
mailing list