[RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt
Cousson, Benoit
b-cousson at ti.com
Wed Aug 10 07:51:47 EDT 2011
Hi Manju,
On 8/9/2011 4:10 PM, G, Manjunath Kondaiah wrote:
>
> The omap dt requires new omap hwmod api to be added for in order
> to support omap dt.
Both the subject and the changelog are misleading. You are not doing any
hwmod stuff in it.
You are just passing an "of_node" pointer during omap_device_build_ss.
The subject should start with OMAP: omap_device: because it does not
belong to the DT subsystem.
The same comment apply to most patches in that series.
> The new api is added and new parameter "np" is added for existing
> api.
I don't think np is not a super meaningful name. Some more explanation
are needed as well.
> The users of hwmod api is changed accrodingly.
omap_device API + typo.
> Build and boot tested on omap3 beagle for both dt and not dt build.
>
> Signed-off-by: G, Manjunath Kondaiah<manjugk at ti.com>
> ---
> arch/arm/mach-omap2/devices.c | 2 +-
> arch/arm/mach-omap2/mcbsp.c | 2 +-
> arch/arm/plat-omap/include/plat/omap_device.h | 11 +++++-
> arch/arm/plat-omap/omap_device.c | 53 ++++++++++++++++++++++---
> 4 files changed, 59 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
> index 458f7be..d7ff1ae 100644
> --- a/arch/arm/mach-omap2/devices.c
> +++ b/arch/arm/mach-omap2/devices.c
> @@ -92,7 +92,7 @@ static int __init omap4_l3_init(void)
> pr_err("could not look up %s\n", oh_name);
> }
>
> - pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
> + pdev = omap_device_build_ss(NULL, "omap_l3_noc", 0, oh, 3, NULL,
> 0, NULL, 0, 0);
OK, maybe that is just me, but in order to extend an API, I'd rather add
the new parameter at the end.
> WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
> diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
> index 7a42f32..98eb95d 100644
> --- a/arch/arm/mach-omap2/mcbsp.c
> +++ b/arch/arm/mach-omap2/mcbsp.c
> @@ -144,7 +144,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
> (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
> count++;
> }
> - pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
> + pdev = omap_device_build_ss(NULL, name, id, oh_device, count, pdata,
> sizeof(*pdata), omap2_mcbsp_latency,
> ARRAY_SIZE(omap2_mcbsp_latency), false);
> kfree(pdata);
> diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
> index 7a3ec4f..5e2424b 100644
> --- a/arch/arm/plat-omap/include/plat/omap_device.h
> +++ b/arch/arm/plat-omap/include/plat/omap_device.h
> @@ -33,6 +33,7 @@
>
> #include<linux/kernel.h>
> #include<linux/platform_device.h>
> +#include<linux/of.h>
>
> #include<plat/omap_hwmod.h>
>
> @@ -89,12 +90,20 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
> struct omap_device_pm_latency *pm_lats,
> int pm_lats_cnt, int is_early_device);
>
> -struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
> +struct platform_device *omap_device_build_ss(struct device_node *np,
> + const char *pdev_name, int pdev_id,
> struct omap_hwmod **oh, int oh_cnt,
> void *pdata, int pdata_len,
> struct omap_device_pm_latency *pm_lats,
> int pm_lats_cnt, int is_early_device);
>
> +struct platform_device *omap_device_build_dt(struct device_node *np,
> + const char *pdev_name, int pdev_id,
> + struct omap_hwmod *oh, void *pdata,
> + int pdata_len,
> + struct omap_device_pm_latency *pm_lats,
> + int pm_lats_cnt, int is_early_device);
> +
> void __iomem *omap_device_get_rt_va(struct omap_device *od);
>
> /* OMAP PM interface */
> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
> index 7d5e76b..fa49168 100644
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -85,6 +85,7 @@
> #include<linux/clk.h>
> #include<linux/clkdev.h>
> #include<linux/pm_runtime.h>
> +#include<linux/of_device.h>
>
> #include<plat/omap_device.h>
> #include<plat/omap_hwmod.h>
> @@ -377,6 +378,7 @@ static int omap_device_fill_resources(struct omap_device *od,
> /**
> * omap_device_build - build and register an omap_device with one omap_hwmod
Need to update the kerneldoc.
> * @pdev_name: name of the platform_device driver to use
> + * @np: device node pointer for attaching it to of_node pointer
> * @pdev_id: this platform_device's connection ID
> * @oh: ptr to the single omap_hwmod that backs this omap_device
> * @pdata: platform_data ptr to associate with the platform_device
> @@ -391,7 +393,8 @@ static int omap_device_fill_resources(struct omap_device *od,
> * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
> * passes along the return value of omap_device_build_ss().
> */
> -struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
> +struct platform_device *omap_device_build_dt(struct device_node *np,
> + const char *pdev_name, int pdev_id,
> struct omap_hwmod *oh, void *pdata,
> int pdata_len,
> struct omap_device_pm_latency *pm_lats,
That function should not be needed. You have to export
omap_device_build_ss, otherwise you will not build any device with
multiple hwmods.
> @@ -402,12 +405,44 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
> if (!oh)
> return ERR_PTR(-EINVAL);
>
> - return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
> + return omap_device_build_ss(np, pdev_name, pdev_id, ohs, 1, pdata,
> pdata_len, pm_lats, pm_lats_cnt,
> is_early_device);
> }
>
> /**
> + * omap_device_build - build and register an omap_device with one omap_hwmod
> + * @pdev_name: name of the platform_device driver to use
> + * @pdev_id: this platform_device's connection ID
> + * @oh: ptr to the single omap_hwmod that backs this omap_device
> + * @pdata: platform_data ptr to associate with the platform_device
> + * @pdata_len: amount of memory pointed to by @pdata
> + * @pm_lats: pointer to a omap_device_pm_latency array for this device
> + * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
> + * @is_early_device: should the device be registered as an early device or not
> + *
> + * Convenience function for building and registering a single
> + * omap_device record, which in turn builds and registers a
> + * platform_device record. See omap_device_build_ss() for more
> + * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
> + * passes along the return value of omap_device_build_ss().
> + */
> +struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
> + struct omap_hwmod *oh, void *pdata,
> + int pdata_len,
> + struct omap_device_pm_latency *pm_lats,
> + int pm_lats_cnt, int is_early_device)
> +{
> + struct omap_hwmod *ohs[] = { oh };
> +
> + if (!oh)
> + return ERR_PTR(-EINVAL);
> +
> + return omap_device_build_ss(NULL, pdev_name, pdev_id, ohs, 1, pdata,
> + pdata_len, pm_lats, pm_lats_cnt, is_early_device);
> +}
> +
> +/**
> * omap_device_build_ss - build and register an omap_device with multiple hwmods
> * @pdev_name: name of the platform_device driver to use
> * @pdev_id: this platform_device's connection ID
> @@ -424,7 +459,8 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
> * platform_device record. Returns an ERR_PTR() on error, or passes
> * along the return value of omap_device_register().
> */
> -struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
> +struct platform_device *omap_device_build_ss(struct device_node *np,
> + const char *pdev_name, int pdev_id,
> struct omap_hwmod **ohs, int oh_cnt,
> void *pdata, int pdata_len,
> struct omap_device_pm_latency *pm_lats,
> @@ -436,6 +472,7 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
> struct resource *res = NULL;
> int i, res_count;
> struct omap_hwmod **hwmods;
> + struct platform_device *pdev;
>
> if (!ohs || oh_cnt == 0 || !pdev_name)
> return ERR_PTR(-EINVAL);
> @@ -450,6 +487,7 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
> if (!od)
> return ERR_PTR(-ENOMEM);
>
> + pdev =&od->pdev;
Why do you need that? You are just adding one more user of the pdev.
> od->hwmods_cnt = oh_cnt;
>
> hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
> @@ -465,8 +503,11 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
> goto odbs_exit2;
> strcpy(pdev_name2, pdev_name);
>
> - od->pdev.name = pdev_name2;
> - od->pdev.id = pdev_id;
> +#ifdef CONFIG_OF_DEVICE
> + pdev->dev.of_node = of_node_get(np);
> +#endif
> + pdev->name = pdev_name2;
> + pdev->id = pdev_id;
>
> res_count = omap_device_count_resources(od);
> if (res_count> 0) {
> @@ -499,7 +540,7 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
> if (ret)
> goto odbs_exit4;
>
> - return&od->pdev;
> + return pdev;
>
> odbs_exit4:
> kfree(res);
Regards,
Benoit
More information about the linux-arm-kernel
mailing list