[PATCH v2] gpio: pl061: add DT binding support

Rob Herring robherring2 at gmail.com
Wed Aug 10 17:31:46 EDT 2011


From: Rob Herring <rob.herring at calxeda.com>

This adds devicetree binding support to the ARM pl061 driver removing the
platform_data dependency. When DT binding is used, the gpio numbering is
assigned dynamically. For now, interrupts are not supported with DT until
irqdomains learn dynamic irq assignment.

Rather than add another case of -1, updating the driver to use NO_IRQ.

Signed-off-by: Rob Herring <rob.herring at calxeda.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
---

v2:
- Add other -1 to NO_IRQ conversions
- Drop DT irq support for now

 drivers/gpio/gpio-pl061.c  |   31 +++++++++++++++++++++----------
 include/linux/amba/pl061.h |    3 +--
 2 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 2c5a18f..093c90b 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -118,7 +118,7 @@ static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
 {
 	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
 
-	if (chip->irq_base == (unsigned) -1)
+	if (chip->irq_base == NO_IRQ)
 		return -EINVAL;
 
 	return chip->irq_base + offset;
@@ -246,6 +246,18 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	if (chip == NULL)
 		return -ENOMEM;
 
+	pdata = dev->dev.platform_data;
+	if (pdata) {
+		chip->gc.base = pdata->gpio_base;
+		chip->irq_base = pdata->irq_base;
+	} else if (dev->dev.of_node) {
+		chip->gc.base = -1;
+		chip->irq_base = NO_IRQ;
+	} else {
+		ret = -ENODEV;
+		goto free_mem;
+	}
+
 	if (!request_mem_region(dev->res.start,
 				resource_size(&dev->res), "pl061")) {
 		ret = -EBUSY;
@@ -267,14 +279,11 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	chip->gc.get = pl061_get_value;
 	chip->gc.set = pl061_set_value;
 	chip->gc.to_irq = pl061_to_irq;
-	chip->gc.base = pdata->gpio_base;
 	chip->gc.ngpio = PL061_GPIO_NR;
 	chip->gc.label = dev_name(&dev->dev);
 	chip->gc.dev = &dev->dev;
 	chip->gc.owner = THIS_MODULE;
 
-	chip->irq_base = pdata->irq_base;
-
 	ret = gpiochip_add(&chip->gc);
 	if (ret)
 		goto iounmap;
@@ -283,7 +292,7 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	 * irq_chip support
 	 */
 
-	if (chip->irq_base == (unsigned) -1)
+	if (chip->irq_base == NO_IRQ)
 		return 0;
 
 	writeb(0, chip->base + GPIOIE); /* disable irqs */
@@ -307,11 +316,13 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	list_add(&chip->list, chip_list);
 
 	for (i = 0; i < PL061_GPIO_NR; i++) {
-		if (pdata->directions & (1 << i))
-			pl061_direction_output(&chip->gc, i,
-					pdata->values & (1 << i));
-		else
-			pl061_direction_input(&chip->gc, i);
+		if (pdata) {
+			if (pdata->directions & (1 << i))
+				pl061_direction_output(&chip->gc, i,
+						pdata->values & (1 << i));
+			else
+				pl061_direction_input(&chip->gc, i);
+		}
 
 		irq_set_chip_and_handler(i + chip->irq_base, &pl061_irqchip,
 					 handle_simple_irq);
diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h
index 5ddd9ad..2412af9 100644
--- a/include/linux/amba/pl061.h
+++ b/include/linux/amba/pl061.h
@@ -7,8 +7,7 @@ struct pl061_platform_data {
 	unsigned	gpio_base;
 
 	/* number of the first IRQ.
-	 * If the IRQ functionality in not desired this must be set to
-	 * (unsigned) -1.
+	 * If the IRQ functionality in not desired this must be set to NO_IRQ.
 	 */
 	unsigned	irq_base;
 
-- 
1.7.4.1




More information about the linux-arm-kernel mailing list