[PATCH 2/6] ARM: add Highbank core platform support

[Rob Herring]

Arnd,

On 08/18/2011 10:34 AM, Arnd Bergmann wrote:
> On Tuesday 16 August 2011, Rob Herring wrote:
> 
>> +void __iomem *a9_base_addr = ((void __iomem *)(HB_MPIC_VIRT_BASE));
>> +void __iomem *sregs_base;
>> +
>> +static struct map_desc highbank_io_desc[] __initdata = {
>> +	{
>> +		.virtual	= HB_MPIC_VIRT_BASE,
>> +		.pfn		= 0, /* run-time */
>> +		.length		= SZ_4K,
>> +		.type		= MT_DEVICE,
>> +	},
>> +#ifdef CONFIG_DEBUG_LL
>> +	{
>> +		.virtual	= HB_DEBUG_LL_VIRT_BASE,
>> +		.pfn		= __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
>> +		.length		= SZ_4K,
>> +		.type		= MT_DEVICE,
>> +	},
>> +#endif
>> +};
>> +
>> +static void __init highbank_map_io(void)
>> +{
>> +	unsigned long base;
>> +
>> +	/* Get SCU base */
>> +	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
>> +
>> +	highbank_io_desc[0].pfn = __phys_to_pfn(base);
>> +	iotable_init(highbank_io_desc, ARRAY_SIZE(highbank_io_desc));
>> +}
> 
> I really liked the way that Barry moved the io_desc out to the
> drivers using them, e.g arch/arm/mach-prima2/lluart.c.
> 
> Can you do the same thing with your lluart and with the a9_base_addr?
> I guess it can live locally in platsmp.c.

Okay.

> 
>> +void highbank_init_irq(void)
>> +{
>> +	struct device_node *node;
>> +	struct of_intc_desc desc;
>> +	int n = 0;
>> +
>> +	memset(&desc, 0, sizeof(desc));
>> +	desc.controller = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
>> +	gic_of_init(&desc);
>> +	node = desc.controller;
>> +	for_each_child_of_node(node, desc.controller) {
>> +		gic_of_ppi_init(&desc);
>> +	}
>> +
>> +	for_each_compatible_node(node, NULL, "arm,pl061") {
>> +		irq_domain_add_simple(node, 160 + (8 * n));
>> +		n++;
>> +	}
> 
> Where does the "160 + (8 * n)" come from? Is that something that should
> be in a property of the gic binding?

All this should go away once we have dynamic linux irq number
assignment. Actually, I should just delete this for now as the pl061
driver doesn't support interrupts yet with DT binding (without platform
data).

> 
>> +#ifdef CONFIG_CACHE_L2X0
>> +	l2x0_of_init(0, ~0UL);
>> +#endif
>> +}
> 
> Hmm, I missed that during the review of the patch that adds l2x0_of_init,
> but I think the #ifdef should really be in the header file, not in the
> user, so that calling l2x0_of_init when CONFIG_CACHE_L2X0 is not set
> automatically turns into an empty stub.

It's also a problem with l2x0_init. I'll add a patch to do that.

> 
>> +static void __init highbank_timer_init(void)
>> +{
>> +	int irq;
>> +	struct device_node *np;
>> +	void __iomem *timer_base;
>> +
>> +	/* Map system registers */
>> +	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
>> +	sregs_base = of_iomap(np, 0);
>> +
>> +	np = of_find_compatible_node(NULL, NULL, "arm,sp804");
>> +	timer_base = of_iomap(np, 0);
>> +	irq = irq_of_parse_and_map(np, 0);
>> +
>> +	highbank_clocks_init();
>> +
>> +	sp804_clocksource_init(timer_base + 0x20, "timer1");
>> +	sp804_clockevents_init(timer_base, irq, "timer0");
>> +}
> 
> How about moving the sp804 initialization from device tree into the
> arch/arm/common/timer-sp.c file?
> 
> Why do you initialize sregs_base from timer_init?

It will be needed before the clocks are initialized. The clock code is
not using it at the moment as I just did a minimal fixed clock
implementation until the clock api and DT clock bindings gets sorted
out. As there are multiple users, I didn't put it in highbank_clocks_init.

> 
>> diff --git a/arch/arm/mach-highbank/include/mach/timex.h b/arch/arm/mach-highbank/include/mach/timex.h
>> new file mode 100644
>> index 0000000..88dac7a
>> --- /dev/null
>> +++ b/arch/arm/mach-highbank/include/mach/timex.h
>> @@ -0,0 +1,6 @@
>> +#ifndef __MACH_TIMEX_H
>> +#define __MACH_TIMEX_H
>> +
>> +#define CLOCK_TICK_RATE		1000000
>> +
>> +#endif
> 
> In 3.2, we shouldn't need this any more. We'll have to come up with a
> way to remember removing the new definitions that come in in parallel
> to the patch that removes the old ones.

I'm tracking the various clean-ups and we can coordinate the order
things go in. I've already made gpio.h empty for example, so gpio will
fail to compile if enabled in this series.

Or I can just submit a patch deleting this file later. It will just be
dead code and won't conflict.

> 
>> +#ifndef _MACH_HIGHBANK__SYSREGS_H_
>> +#define _MACH_HIGHBANK__SYSREGS_H_
>> +
>> +extern void __iomem *sregs_base;
>> +
>> +#define HB_SREG_A9_PWR_REQ		0xf00
>> +#define HB_SREG_A9_BOOT_STAT		0xf04
>> +#define HB_SREG_A9_BOOT_DATA		0xf08
>> +
>> +#define HB_PWR_SUSPEND			0
>> +#define HB_PWR_SOFT_RESET		1
>> +#define HB_PWR_HARD_RESET		2
>> +#define HB_PWR_SHUTDOWN			3
>> +
>> +#endif
> 
> Do these really need to be global?
> 
> I think it's better to put the base address and register definitions into a
> single file and export functions to be used from elsewhere.

Yes, sregs are a random collection of functions, so it's going to be a
mixture of various users. Just HB_PWR_* alone are in 2 or 3 different
places.

Rob