[RFC PATCH] ARM: sched_clock: allow sched_clock to be selected at runtime
Marc Zyngier
marc.zyngier at arm.com
Tue Aug 9 13:13:35 EDT 2011
sched_clock() is yet another blocker on the road to the single
image. This patch implements an idea by Russell King:
http://www.spinics.net/lists/linux-omap/msg49561.html
Instead of asking the platform to implement both sched_clock()
itself and the rollover callback, simply register a read()
function, and let the ARM code care about sched_clock() itself,
the conversion to ns and the rollover. sched_clock() uses
this read() function as an indirection to the platform code.
This allow some simplifications and possibly some footprint gain
when multiple platforms are compiled in. Among the drawbacks,
the removal of the *_fixed_sched_clock optimization which could
negatively impact some platforms (sa1100, tegra, versatile
and omap).
Tested on 11MPCore, OMAP4 and Tegra.
Cc: Imre Kaloz <kaloz at openwrt.org>
Cc: Krzysztof Halasa <khc at pm.waw.pl>
Cc: Tony Lindgren <tony at atomide.com>
Cc: Eric Miao <eric.y.miao at gmail.com>
Cc: Colin Cross <ccross at android.com>
Cc: Erik Gilling <konkers at android.com>
Cc: Olof Johansson <olof at lixom.net>
Cc: Linus Walleij <linus.walleij at stericsson.com>
Cc: Sascha Hauer <kernel at pengutronix.de>
Cc: Alessandro Rubini <rubini at unipv.it>
Cc: STEricsson <STEricsson_nomadik_linux at list.st.com>
Cc: Lennert Buytenhek <kernel at wantstofly.org>
Cc: Nicolas Pitre <nico at fluxnic.net>
Cc: Ben Dooks <ben-linux at fluff.org>
Cc: Kukjin Kim <kgene.kim at samsung.com>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
Based on v3.0-rc1.
arch/arm/include/asm/sched_clock.h | 108 +-----------------------------
arch/arm/kernel/sched_clock.c | 97 +++++++++++++++++++++++++--
arch/arm/mach-ixp4xx/common.c | 15 +---
arch/arm/mach-mmp/time.c | 15 +---
arch/arm/mach-omap1/time.c | 57 +---------------
arch/arm/mach-omap2/timer.c | 20 +-----
arch/arm/mach-pxa/time.c | 14 +---
arch/arm/mach-sa1100/time.c | 27 +-------
arch/arm/mach-tegra/timer.c | 23 +------
arch/arm/mach-u300/timer.c | 14 +---
arch/arm/plat-iop/time.c | 15 +---
arch/arm/plat-mxc/time.c | 15 +---
arch/arm/plat-nomadik/timer.c | 17 +----
arch/arm/plat-omap/counter_32k.c | 39 +----------
arch/arm/plat-omap/include/plat/common.h | 2 +-
arch/arm/plat-orion/time.c | 20 +-----
arch/arm/plat-s5p/s5p-time.c | 18 +----
arch/arm/plat-versatile/sched-clock.c | 27 ++------
18 files changed, 141 insertions(+), 402 deletions(-)
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index c8e6ddf..e3f7572 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -8,113 +8,7 @@
#ifndef ASM_SCHED_CLOCK
#define ASM_SCHED_CLOCK
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct clock_data {
- u64 epoch_ns;
- u32 epoch_cyc;
- u32 epoch_cyc_copy;
- u32 mult;
- u32 shift;
-};
-
-#define DEFINE_CLOCK_DATA(name) struct clock_data name
-
-static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
-{
- return (cyc * mult) >> shift;
-}
-
-/*
- * Atomically update the sched_clock epoch. Your update callback will
- * be called from a timer before the counter wraps - read the current
- * counter value, and call this function to safely move the epochs
- * forward. Only use this from the update callback.
- */
-static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask)
-{
- unsigned long flags;
- u64 ns = cd->epoch_ns +
- cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift);
-
- /*
- * Write epoch_cyc and epoch_ns in a way that the update is
- * detectable in cyc_to_fixed_sched_clock().
- */
- raw_local_irq_save(flags);
- cd->epoch_cyc = cyc;
- smp_wmb();
- cd->epoch_ns = ns;
- smp_wmb();
- cd->epoch_cyc_copy = cyc;
- raw_local_irq_restore(flags);
-}
-
-/*
- * If your clock rate is known at compile time, using this will allow
- * you to optimize the mult/shift loads away. This is paired with
- * init_fixed_sched_clock() to ensure that your mult/shift are correct.
- */
-static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd,
- u32 cyc, u32 mask, u32 mult, u32 shift)
-{
- u64 epoch_ns;
- u32 epoch_cyc;
-
- /*
- * Load the epoch_cyc and epoch_ns atomically. We do this by
- * ensuring that we always write epoch_cyc, epoch_ns and
- * epoch_cyc_copy in strict order, and read them in strict order.
- * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
- * the middle of an update, and we should repeat the load.
- */
- do {
- epoch_cyc = cd->epoch_cyc;
- smp_rmb();
- epoch_ns = cd->epoch_ns;
- smp_rmb();
- } while (epoch_cyc != cd->epoch_cyc_copy);
-
- return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift);
-}
-
-/*
- * Otherwise, you need to use this, which will obtain the mult/shift
- * from the clock_data structure. Use init_sched_clock() with this.
- */
-static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd,
- u32 cyc, u32 mask)
-{
- return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift);
-}
-
-/*
- * Initialize the clock data - calculate the appropriate multiplier
- * and shift. Also setup a timer to ensure that the epoch is refreshed
- * at the appropriate time interval, which will call your update
- * handler.
- */
-void init_sched_clock(struct clock_data *, void (*)(void),
- unsigned int, unsigned long);
-
-/*
- * Use this initialization function rather than init_sched_clock() if
- * you're using cyc_to_fixed_sched_clock, which will warn if your
- * constants are incorrect.
- */
-static inline void init_fixed_sched_clock(struct clock_data *cd,
- void (*update)(void), unsigned int bits, unsigned long rate,
- u32 mult, u32 shift)
-{
- init_sched_clock(cd, update, bits, rate);
- if (cd->mult != mult || cd->shift != shift) {
- pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n"
- "sched_clock: fix multiply/shift to avoid scheduler hiccups\n",
- mult, shift, cd->mult, cd->shift);
- }
-}
-
extern void sched_clock_postinit(void);
+extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
#endif
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index 9a46370..3c0d93a 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -14,25 +14,88 @@
#include <asm/sched_clock.h>
+struct clock_data {
+ u64 epoch_ns;
+ u32 epoch_cyc;
+ u32 epoch_cyc_copy;
+ u32 mult;
+ u32 shift;
+};
+
static void sched_clock_poll(unsigned long wrap_ticks);
static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
-static void (*sched_clock_update_fn)(void);
+
+static struct clock_data cd;
+static u32 sched_clock_mask;
+static u32 __read_mostly (*read_sched_clock)(void);
+
+static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+{
+ return (cyc * mult) >> shift;
+}
+
+static unsigned long long cyc_to_sched_clock(struct clock_data *cd,
+ u32 cyc, u32 mask)
+{
+ u64 epoch_ns;
+ u32 epoch_cyc;
+
+ /*
+ * Load the epoch_cyc and epoch_ns atomically. We do this by
+ * ensuring that we always write epoch_cyc, epoch_ns and
+ * epoch_cyc_copy in strict order, and read them in strict order.
+ * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
+ * the middle of an update, and we should repeat the load.
+ */
+ do {
+ epoch_cyc = cd->epoch_cyc;
+ smp_rmb();
+ epoch_ns = cd->epoch_ns;
+ smp_rmb();
+ } while (epoch_cyc != cd->epoch_cyc_copy);
+
+ return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, cd->mult, cd->shift);
+}
+
+/*
+ * Atomically update the sched_clock epoch.
+ */
+static void notrace update_sched_clock(void)
+{
+ unsigned long flags;
+ u32 cyc;
+ u64 ns;
+
+ cyc = read_sched_clock();
+ ns = cd.epoch_ns +
+ cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask,
+ cd.mult, cd.shift);
+ /*
+ * Write epoch_cyc and epoch_ns in a way that the update is
+ * detectable in cyc_to_fixed_sched_clock().
+ */
+ raw_local_irq_save(flags);
+ cd.epoch_cyc = cyc;
+ smp_wmb();
+ cd.epoch_ns = ns;
+ smp_wmb();
+ cd.epoch_cyc_copy = cyc;
+ raw_local_irq_restore(flags);
+}
static void sched_clock_poll(unsigned long wrap_ticks)
{
mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks));
- sched_clock_update_fn();
+ update_sched_clock();
}
-void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
- unsigned int clock_bits, unsigned long rate)
+static void __init init_sched_clock(struct clock_data *cd,
+ unsigned int clock_bits, unsigned long rate)
{
unsigned long r, w;
u64 res, wrap;
char r_unit;
- sched_clock_update_fn = update;
-
/* calculate the mult/shift to convert counter ticks to ns. */
clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 0);
@@ -60,7 +123,7 @@ void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
* sets the initial epoch.
*/
sched_clock_timer.data = msecs_to_jiffies(w - (w / 10));
- update();
+ update_sched_clock();
/*
* Ensure that sched_clock() starts off at 0ns
@@ -68,6 +131,26 @@ void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
cd->epoch_ns = 0;
}
+unsigned long long notrace sched_clock(void)
+{
+ if (read_sched_clock) {
+ u32 cyc = read_sched_clock();
+ return cyc_to_sched_clock(&cd, cyc, sched_clock_mask);
+ }
+
+ return (unsigned long long)(jiffies - INITIAL_JIFFIES)
+ * (NSEC_PER_SEC / HZ);
+}
+
+void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
+{
+ BUG_ON(bits > 32);
+ read_sched_clock = read;
+ sched_clock_mask = (1 << bits) - 1;
+ init_sched_clock(&cd, bits, rate);
+ pr_debug("Registered %pF as sched_clock source\n", read);
+}
+
void __init sched_clock_postinit(void)
{
sched_clock_poll(sched_clock_timer.data);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 0777257..3b016eb 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -402,18 +402,9 @@ void __init ixp4xx_sys_init(void)
/*
* sched_clock()
*/
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
+static u32 ixp4xx_read_sched_clock(void)
{
- u32 cyc = *IXP4XX_OSTS;
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace ixp4xx_update_sched_clock(void)
-{
- u32 cyc = *IXP4XX_OSTS;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return *IXP4XX_OSTS;
}
/*
@@ -429,7 +420,7 @@ unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
- init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
+ setup_sched_clock(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
ixp4xx_clocksource_read);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 99833b9..b37265d 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -42,8 +42,6 @@
#define MAX_DELTA (0xfffffffe)
#define MIN_DELTA (16)
-static DEFINE_CLOCK_DATA(cd);
-
/*
* FIXME: the timer needs some delay to stablize the counter capture
*/
@@ -59,16 +57,9 @@ static inline uint32_t timer_read(void)
return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
}
-unsigned long long notrace sched_clock(void)
+static u32 mmp_read_sched_clock(void)
{
- u32 cyc = timer_read();
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace mmp_update_sched_clock(void)
-{
- u32 cyc = timer_read();
- update_sched_clock(&cd, cyc, (u32)~0);
+ return timer_read();
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -175,7 +166,7 @@ void __init timer_init(int irq)
{
timer_config();
- init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE);
+ setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a183777..61059f6 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -190,30 +190,9 @@ static __init void omap_init_mpu_timer(unsigned long rate)
* ---------------------------------------------------------------------------
*/
-static DEFINE_CLOCK_DATA(cd);
-
-static inline unsigned long long notrace _omap_mpu_sched_clock(void)
-{
- u32 cyc = ~omap_mpu_timer_read(1);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-#ifndef CONFIG_OMAP_32K_TIMER
-unsigned long long notrace sched_clock(void)
-{
- return _omap_mpu_sched_clock();
-}
-#else
-static unsigned long long notrace omap_mpu_sched_clock(void)
-{
- return _omap_mpu_sched_clock();
-}
-#endif
-
-static void notrace mpu_update_sched_clock(void)
+static u32 omap_mpu_read_sched_clock(void)
{
- u32 cyc = ~omap_mpu_timer_read(1);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return ~omap_mpu_timer_read(1);
}
static void __init omap_init_clocksource(unsigned long rate)
@@ -223,7 +202,7 @@ static void __init omap_init_clocksource(unsigned long rate)
"%s: can't register clocksource!\n";
omap_mpu_timer_start(1, ~0, 1);
- init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
+ setup_sched_clock(omap_mpu_read_sched_clock, 32, rate);
if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
300, 32, clocksource_mmio_readl_down))
@@ -254,30 +233,6 @@ static inline void omap_mpu_timer_init(void)
}
#endif /* CONFIG_OMAP_MPU_TIMER */
-#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER)
-static unsigned long long (*preferred_sched_clock)(void);
-
-unsigned long long notrace sched_clock(void)
-{
- if (!preferred_sched_clock)
- return 0;
-
- return preferred_sched_clock();
-}
-
-static inline void preferred_sched_clock_init(bool use_32k_sched_clock)
-{
- if (use_32k_sched_clock)
- preferred_sched_clock = omap_32k_sched_clock;
- else
- preferred_sched_clock = omap_mpu_sched_clock;
-}
-#else
-static inline void preferred_sched_clock_init(bool use_32k_sched_clcok)
-{
-}
-#endif
-
static inline int omap_32k_timer_usable(void)
{
int res = false;
@@ -299,12 +254,8 @@ static inline int omap_32k_timer_usable(void)
*/
static void __init omap1_timer_init(void)
{
- if (omap_32k_timer_usable()) {
- preferred_sched_clock_init(1);
- } else {
+ if (!omap_32k_timer_usable())
omap_mpu_timer_init();
- preferred_sched_clock_init(0);
- }
}
struct sys_timer omap1_timer = {
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index e964072..a565cd5 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -248,7 +248,6 @@ static struct omap_dm_timer clksrc;
/*
* clocksource
*/
-static DEFINE_CLOCK_DATA(cd);
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1);
@@ -262,23 +261,12 @@ static struct clocksource clocksource_gpt = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void notrace dmtimer_update_sched_clock(void)
+static u32 dmtimer_read_sched_clock(void)
{
- u32 cyc;
-
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
-
- update_sched_clock(&cd, cyc, (u32)~0);
-}
-
-unsigned long long notrace sched_clock(void)
-{
- u32 cyc = 0;
-
if (clksrc.reserved)
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ return __omap_dm_timer_read_counter(clksrc.io_base, 1);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+ return 0;
}
/* Setup free-running counter for clocksource */
@@ -294,7 +282,7 @@ static void __init omap2_gp_clocksource_init(int gptimer_id,
gptimer_id, clksrc.rate);
__omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1);
- init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
+ setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
pr_err("Could not register clocksource %s\n",
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index de68470..ff46077 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -32,18 +32,10 @@
* long as there is always less than 582 seconds between successive
* calls to sched_clock() which should always be the case in practice.
*/
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 pxa_read_sched_clock(void)
{
- u32 cyc = OSCR;
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace pxa_update_sched_clock(void)
-{
- u32 cyc = OSCR;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return OSCR;
}
@@ -119,7 +111,7 @@ static void __init pxa_timer_init(void)
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
+ setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
ckevt_pxa_osmr0.max_delta_ns =
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index fa66024..ae696d2 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -20,29 +20,9 @@
#include <asm/sched_clock.h>
#include <mach/hardware.h>
-/*
- * This is the SA11x0 sched_clock implementation.
- */
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 3.6864MHz,
- * NSEC_PER_SEC, 60).
- * This gives a resolution of about 271ns and a wrap period of about 19min.
- */
-#define SC_MULT 2275555556u
-#define SC_SHIFT 23
-
-unsigned long long notrace sched_clock(void)
-{
- u32 cyc = OSCR;
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-static void notrace sa1100_update_sched_clock(void)
+static u32 sa100_read_sched_clock(void)
{
- u32 cyc = OSCR;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return OSCR;
}
#define MIN_OSCR_DELTA 2
@@ -109,8 +89,7 @@ static void __init sa1100_timer_init(void)
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32,
- 3686400, SC_MULT, SC_SHIFT);
+ setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
ckevt_sa1100_osmr0.max_delta_ns =
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 9035042..b67490e 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -106,25 +106,9 @@ static struct clock_event_device tegra_clockevent = {
.set_mode = tegra_timer_set_mode,
};
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60).
- * This gives a resolution of about 1us and a wrap period of about 1h11min.
- */
-#define SC_MULT 4194304000u
-#define SC_SHIFT 22
-
-unsigned long long notrace sched_clock(void)
-{
- u32 cyc = timer_readl(TIMERUS_CNTR_1US);
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-static void notrace tegra_update_sched_clock(void)
+static u32 tegra_read_sched_clock(void)
{
- u32 cyc = timer_readl(TIMERUS_CNTR_1US);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return timer_readl(TIMERUS_CNTR_1US);
}
/*
@@ -218,8 +202,7 @@ static void __init tegra_init_timer(void)
WARN(1, "Unknown clock rate");
}
- init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32,
- 1000000, SC_MULT, SC_SHIFT);
+ setup_sched_clock(tegra_read_sched_clock, 32, 1000000);
if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 5f51bde..284e79f 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -337,18 +337,10 @@ static struct irqaction u300_timer_irq = {
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by OMAP implementation.)
*/
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 u300_read_sched_clock(void)
{
- u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace u300_update_sched_clock(void)
-{
- u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
}
@@ -366,7 +358,7 @@ static void __init u300_timer_init(void)
clk_enable(clk);
rate = clk_get_rate(clk);
- init_sched_clock(&cd, u300_update_sched_clock, 32, rate);
+ setup_sched_clock(u300_read_sched_clock, 32, rate);
/*
* Disable the "OS" and "DD" timers - these are designed for Symbian!
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 7cdc516..5451e58 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -51,21 +51,12 @@ static struct clocksource iop_clocksource = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static DEFINE_CLOCK_DATA(cd);
-
/*
* IOP sched_clock() implementation via its clocksource.
*/
-unsigned long long notrace sched_clock(void)
+static u32 iop_read_sched_clock(void)
{
- u32 cyc = 0xffffffffu - read_tcr1();
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace iop_update_sched_clock(void)
-{
- u32 cyc = 0xffffffffu - read_tcr1();
- update_sched_clock(&cd, cyc, (u32)~0);
+ return 0xffffffffu - read_tcr1();
}
/*
@@ -151,7 +142,7 @@ void __init iop_init_time(unsigned long tick_rate)
{
u32 timer_ctl;
- init_sched_clock(&cd, iop_update_sched_clock, 32, tick_rate);
+ setup_sched_clock(iop_read_sched_clock, 32, tick_rate);
ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
iop_tick_rate = tick_rate;
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 4b0fe28..eebe220 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -108,18 +108,9 @@ static void gpt_irq_acknowledge(void)
static void __iomem *sched_clock_reg;
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 mxc_read_sched_clock(void)
{
- cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
-
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace mxc_update_sched_clock(void)
-{
- cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
}
static int __init mxc_clocksource_init(struct clk *timer_clk)
@@ -129,7 +120,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
sched_clock_reg = reg;
- init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
+ setup_sched_clock(mxc_read_sched_clock, 32, c);
return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
clocksource_mmio_readl_up);
}
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ef74e15..ab4b82e 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -30,23 +30,12 @@ void __iomem *mtu_base; /* Assigned by machine code */
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
*/
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
+static u32 nomadik_read_sched_clock(void)
{
- u32 cyc;
-
if (unlikely(!mtu_base))
return 0;
- cyc = -readl(mtu_base + MTU_VAL(0));
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace nomadik_update_sched_clock(void)
-{
- u32 cyc = -readl(mtu_base + MTU_VAL(0));
- update_sched_clock(&cd, cyc, (u32)~0);
+ return -readl(mtu_base + MTU_VAL(0));
}
/* Clockevent device: use one-shot mode */
@@ -154,7 +143,7 @@ void __init nmdk_timer_init(void)
pr_err("timer: failed to initialize clock source %s\n",
"mtu_0");
- init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
+ setup_sched_clock(nomadik_setup_sched_clock, 32, rate);
/* Timer 1 is used for events */
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index a6cbb71..55b24b3 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -37,41 +37,9 @@ static void __iomem *timer_32k_base;
#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 32768, NSEC_PER_SEC, 60).
- * This gives a resolution of about 30us and a wrap period of about 36hrs.
- */
-#define SC_MULT 4000000000u
-#define SC_SHIFT 17
-
-static inline unsigned long long notrace _omap_32k_sched_clock(void)
-{
- u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER)
-unsigned long long notrace sched_clock(void)
-{
- return _omap_32k_sched_clock();
-}
-#else
-unsigned long long notrace omap_32k_sched_clock(void)
-{
- return _omap_32k_sched_clock();
-}
-#endif
-
-static void notrace omap_update_sched_clock(void)
+u32 omap_32k_read_sched_clock(void)
{
- u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return timer_32k_base ? __raw_readl(timer_32k_base) : 0;
}
/**
@@ -147,8 +115,7 @@ int __init omap_init_clocksource_32k(void)
clocksource_mmio_readl_up))
printk(err, "32k_counter");
- init_fixed_sched_clock(&cd, omap_update_sched_clock, 32,
- 32768, SC_MULT, SC_SHIFT);
+ setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
}
return 0;
}
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 4564cc6..c22e1d1 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -41,7 +41,7 @@ extern struct sys_timer omap3_secure_timer;
extern struct sys_timer omap4_timer;
extern bool omap_32k_timer_init(void);
extern int __init omap_init_clocksource_32k(void);
-extern unsigned long long notrace omap_32k_sched_clock(void);
+extern u32 omap_32k_read_sched_clock(void);
extern void omap_reserve(void);
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 69a6136..99ea614 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -60,24 +60,10 @@ static u32 ticks_per_jiffy;
* Orion's sched_clock implementation. It has a resolution of
* at least 7.5ns (133MHz TCLK).
*/
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 orion_read_sched_clock(void)
{
- u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-
-static void notrace orion_update_sched_clock(void)
-{
- u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
- update_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void __init setup_sched_clock(unsigned long tclk)
-{
- init_sched_clock(&cd, orion_update_sched_clock, 32, tclk);
+ return ~readl(timer_base + TIMER0_VAL_OFF);
}
/*
@@ -217,7 +203,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
/*
* Set scale and timer for sched_clock.
*/
- setup_sched_clock(tclk);
+ setup_sched_clock(orion_read_sched_clock, 32, tclk);
/*
* Setup free-running clocksource timer (interrupts
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
index c833e7b..330caa1 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-s5p/s5p-time.c
@@ -321,26 +321,14 @@ static void __iomem *s5p_timer_reg(void)
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by U300 implementation.)
*/
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
-{
- void __iomem *reg = s5p_timer_reg();
-
- if (!reg)
- return 0;
-
- return cyc_to_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
-}
-
-static void notrace s5p_update_sched_clock(void)
+static u32 s5p_read_sched_clock(void)
{
void __iomem *reg = s5p_timer_reg();
if (!reg)
return;
- update_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
+ return ~__raw_readl(reg);
}
static void __init s5p_clocksource_init(void)
@@ -358,7 +346,7 @@ static void __init s5p_clocksource_init(void)
s5p_time_setup(timer_source.source_id, TCNT_MAX);
s5p_time_start(timer_source.source_id, PERIODIC);
- init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
+ setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
clock_rate, 250, 32, clocksource_mmio_readl_down))
diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c
index 3d6a4c2..3096c68 100644
--- a/arch/arm/plat-versatile/sched-clock.c
+++ b/arch/arm/plat-versatile/sched-clock.c
@@ -24,35 +24,18 @@
#include <asm/sched_clock.h>
#include <plat/sched_clock.h>
-static DEFINE_CLOCK_DATA(cd);
static void __iomem *ctr;
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 24MHz, NSEC_PER_SEC, 60).
- * This gives a resolution of about 41ns and a wrap period of about 178s.
- */
-#define SC_MULT 2796202667u
-#define SC_SHIFT 26
-
-unsigned long long notrace sched_clock(void)
+static u32 versatile_read_sched_clock(void)
{
- if (ctr) {
- u32 cyc = readl(ctr);
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0,
- SC_MULT, SC_SHIFT);
- } else
- return 0;
-}
+ if (ctr)
+ return readl(ctr);
-static void notrace versatile_update_sched_clock(void)
-{
- u32 cyc = readl(ctr);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return 0;
}
void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate)
{
ctr = reg;
- init_fixed_sched_clock(&cd, versatile_update_sched_clock,
- 32, rate, SC_MULT, SC_SHIFT);
+ setup_sched_clock(versatile_read_sched_clock, 32, rate);
}
--
1.7.0.4
More information about the linux-arm-kernel
mailing list