[PATCH 1/6] ARM: highbank: add devicetree source

Rob Herring robherring2 at gmail.com
Sat Aug 20 14:32:31 EDT 2011


On 08/17/2011 09:51 AM, Shawn Guo wrote:
> On Wed, Aug 17, 2011 at 08:49:41AM -0500, Rob Herring wrote:
>> Shawn,
>>
>> On 08/17/2011 02:27 AM, Shawn Guo wrote:
>>> Hi Rob,
>>>
>>> On Tue, Aug 16, 2011 at 03:34:53PM -0500, Rob Herring wrote:
>>>> From: Rob Herring <rob.herring at calxeda.com>
>>>>
>>>> This adds the devicetree source and documentation for the Calxeda highbank
>>>> platform.
>>>>
>>>> Signed-off-by: Rob Herring <rob.herring at calxeda.com>
>>>> ---
>>>>  Documentation/devicetree/bindings/arm/calxeda.txt |    8 +
>>>>  arch/arm/boot/dts/highbank.dts                    |  212 +++++++++++++++++++++
>>>>  2 files changed, 220 insertions(+), 0 deletions(-)
>>>>  create mode 100644 Documentation/devicetree/bindings/arm/calxeda.txt
>>>>  create mode 100644 arch/arm/boot/dts/highbank.dts
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt
>>>> new file mode 100644
>>>> index 0000000..4755caa
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/arm/calxeda.txt
>>>> @@ -0,0 +1,8 @@
>>>> +Calxeda Highbank Platforms Device Tree Bindings
>>>> +-----------------------------------------------
>>>> +
>>>> +Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
>>>> +properties.
>>>> +
>>>> +Required root node properties:
>>>> +    - compatible = "calxeda,highbank";
>>>> diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
>>>> new file mode 100644
>>>> index 0000000..2dd3b7b
>>>> --- /dev/null
>>>> +++ b/arch/arm/boot/dts/highbank.dts
>>>> @@ -0,0 +1,212 @@
>>>> +/*
>>>> + * Copyright 2011 Calxeda, Inc.
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify it
>>>> + * under the terms and conditions of the GNU General Public License,
>>>> + * version 2, as published by the Free Software Foundation.
>>>> + *
>>>> + * This program is distributed in the hope it will be useful, but WITHOUT
>>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>>>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>>>> + * more details.
>>>> + *
>>>> + * You should have received a copy of the GNU General Public License along with
>>>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +/* First 4KB has pen for secondary cores. */
>>>> +/memreserve/ 0x00000000 0x0001000;
>>>> +
>>> I failed to find the "pen" handling in the whole patch series.  Am I
>>> missing anything?
>>>
>>
>> In highbank.c:
>>
>> +#define HB_JUMP_TABLE_PHYS(cpu)		(0x40 + (0x10 * (cpu)))
>> +#define HB_JUMP_TABLE_VIRT(cpu)		phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
>> +
>> +void highbank_set_cpu_jump(int cpu, void *jump_addr)
>> +{
>> +	writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
>> +	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
>> +	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
>> +			  HB_JUMP_TABLE_PHYS(cpu) + 15);
>> +}
>>
> Ah, ok, the 'pen' you meant is the entry address of secondary cores.
> I thought of something like 'pen_release' in plat-versatile/platsmp.c.
> So you do not need 'boot_lock' and 'pen_release' stuff to sync secondary
> cores with the primary one (like all other smp platforms do)?
> 

The kernel pen code is only needed for cores that don't reset on hot
unplug and just go to wfi. All other smp platforms just cut and paste
the same code.

Rob



More information about the linux-arm-kernel mailing list