[PATCH 16/22] OMAP2+: voltage: enable VC bypass scale method when VC is initialized

Kevin Hilman khilman at ti.com
Mon Aug 29 13:35:49 EDT 2011


VC is initialized first, set default scaling method to VC bypass.
If/when VP is initialized, default scaling method will be changed to
VP force-update.

Enabling VC bypass as default as soon as VC is initialized allows for
VC bypass scaling to work when no VP is configured/initialized for a
given voltage domain.

Signed-off-by: Kevin Hilman <khilman at ti.com>
---
 arch/arm/mach-omap2/voltage.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index c6352e3..e1a22a3 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -802,8 +802,10 @@ int __init omap_voltage_late_init(void)
 		if (!voltdm->scalable)
 			continue;
 
-		if (voltdm->vc)
+		if (voltdm->vc) {
+			voltdm->vdd->volt_scale = omap_vc_bypass_scale;
 			omap_vc_init_channel(voltdm);
+		}
 
 		if (voltdm->vdd) {
 			if (omap_vdd_data_configure(voltdm))
-- 
1.7.6




More information about the linux-arm-kernel mailing list