[PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210

Rafael J. Wysocki rjw at sisk.pl
Sat Aug 13 19:39:46 EDT 2011


On Saturday, August 13, 2011, Russell King - ARM Linux wrote:
> On Sat, Aug 13, 2011 at 11:24:07PM +0200, Rafael J. Wysocki wrote:
> > On Thursday, August 11, 2011, Chanwoo Choi wrote:
> > > The following patch set use the generic Power domain Framework instead of
> > > power domain code depend of Samsung SoC.
> > > 
> > > Chanwoo Choi (4):
> > >   ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210
> > >   ARM: EXYNOS4: Support for generic Clock manipulation PM callbacks
> > >   ARM: EXYNOS4: Delete the power-domain code depend on Samsung SoC
> > >   ARM: EXYNOS4: Add power domain to use generic Power domain Framework
> > > 
> > >  arch/arm/mach-exynos4/Kconfig                      |   10 +-
> > >  arch/arm/mach-exynos4/Makefile                     |    4 +-
> > >  arch/arm/mach-exynos4/dev-pd.c                     |  139 --------------
> > >  arch/arm/mach-exynos4/include/mach/pm-exynos4210.h |   52 ++++++
> > >  arch/arm/mach-exynos4/include/mach/regs-clock.h    |    8 +
> > >  arch/arm/mach-exynos4/mach-nuri.c                  |   21 ++-
> > >  arch/arm/mach-exynos4/mach-smdkc210.c              |   26 ++-
> > >  arch/arm/mach-exynos4/mach-smdkv310.c              |   23 ++-
> > >  arch/arm/mach-exynos4/mach-universal_c210.c        |   21 ++-
> > >  arch/arm/mach-exynos4/pm-exynos4210.c              |  189 ++++++++++++++++++++
> > >  arch/arm/mach-exynos4/pm-runtime.c                 |   56 ++++++
> > >  arch/arm/plat-samsung/Kconfig                      |    8 -
> > >  arch/arm/plat-samsung/Makefile                     |    4 -
> > >  arch/arm/plat-samsung/include/plat/pd.h            |   30 ---
> > >  arch/arm/plat-samsung/pd.c                         |   95 ----------
> > >  15 files changed, 377 insertions(+), 309 deletions(-)
> > >  delete mode 100644 arch/arm/mach-exynos4/dev-pd.c
> > >  create mode 100644 arch/arm/mach-exynos4/include/mach/pm-exynos4210.h
> > >  create mode 100644 arch/arm/mach-exynos4/pm-exynos4210.c
> > >  create mode 100644 arch/arm/mach-exynos4/pm-runtime.c
> > >  delete mode 100644 arch/arm/plat-samsung/include/plat/pd.h
> > >  delete mode 100644 arch/arm/plat-samsung/pd.c
> > 
> > The patchset looks good to me, but please note that some code it
> > is based on will most likely change in 3.2 due to this patchset:
> > 
> > https://lkml.org/lkml/2011/8/8/420
> 
> Err, isn't all that pm_clk stuff just duplicating what the clk API does?

I'm not sure it's duplicating anything.  Maybe it does, but it came into
being by moving some code that were duplicated in a few places throughout
the ARM and sh trees into one place.

> IOW, drivers _can_ (and should be) calling clk_disable() when they don't
> need the clock running.

Drivers may not know about what to do in a given situation.  For example,
if the system has power domains, it may be better to switch a power domain
off instead of or in addition to disabling the clock and the driver usually
doesn't know about that.

Thanks,
Rafael



More information about the linux-arm-kernel mailing list