[PATCH 5/5] OMAP: HWMOD: Unify DSS resets for all OMAPs
Paul Walmsley
paul at pwsan.com
Sun Aug 21 01:42:43 EDT 2011
From: Tomi Valkeinen <tomi.valkeinen at ti.com>
This patch adds a custom DSS reset function used on all OMAP's.
The function doesn't actually do a reset, it only waits for the reset to
complete. The reason for this is that on OMAP4 there is no possibility
to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets
all the other DSS modules also, thus breaking the HWMOD model where
every DSS module is independent.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
[paul at pwsan.com: modified to build arch/arm/mach-omap2/display.o
unconditionally to avoid an error when !CONFIG_OMAP2_DSS]
Signed-off-by: Paul Walmsley <paul at pwsan.com>
---
arch/arm/mach-omap2/Makefile | 5 +--
arch/arm/mach-omap2/display.c | 35 ++++++++++++++++++++
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 2 +
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +
arch/arm/plat-omap/include/plat/common.h | 3 ++
include/video/omapdss.h | 7 ----
6 files changed, 43 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f343365..bf85539 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o
+ common.o gpio.o dma.o wd_timer.o display.o
omap-2-3-common = irq.o sdrc.o
hwmod-common = omap_hwmod.o \
@@ -276,7 +276,4 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
-disp-$(CONFIG_OMAP2_DSS) := display.o
-obj-y += $(disp-m) $(disp-y)
-
obj-y += common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a5b7a23..cdb675a 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -26,6 +26,7 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
+#include <plat/common.h>
static struct platform_device omap_display_device = {
.name = "omapdss",
@@ -126,3 +127,37 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
return r;
}
+
+#define MAX_MODULE_SOFTRESET_WAIT 10000
+int omap_dss_reset(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_opt_clk *oc;
+ int c = 0;
+ int i, r;
+
+ if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
+ pr_err("dss_core: hwmod data doesn't contain reset data\n");
+ return -EINVAL;
+ }
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk)
+ clk_enable(oc->_clk);
+
+ omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+
+ if (c == MAX_MODULE_SOFTRESET_WAIT)
+ pr_warning("dss_core: waiting for reset to finish failed\n");
+ else
+ pr_debug("dss_core: softreset done\n");
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk)
+ clk_disable(oc->_clk);
+
+ r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+ return r;
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index d78c132..c11273d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -11,6 +11,7 @@
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
#include <plat/dma.h>
+#include <plat/common.h>
#include <mach/irqs.h>
@@ -51,6 +52,7 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
struct omap_hwmod_class omap2_dss_hwmod_class = {
.name = "dss",
.sysc = &omap2_dss_sysc,
+ .reset = omap_dss_reset,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 8b74058..7a7489e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -29,6 +29,7 @@
#include <plat/mcbsp.h>
#include <plat/mmc.h>
#include <plat/i2c.h>
+#include <plat/common.h>
#include "omap_hwmod_common_data.h"
@@ -1204,6 +1205,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = {
static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
.name = "dss",
.sysc = &omap44xx_dss_sysc,
+ .reset = omap_dss_reset,
};
/* dss */
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 4564cc6..a822685 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <plat/i2c.h>
+#include <plat/omap_hwmod.h>
struct sys_timer;
@@ -45,6 +46,8 @@ extern unsigned long long notrace omap_32k_sched_clock(void);
extern void omap_reserve(void);
+extern int omap_dss_reset(struct omap_hwmod *);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 3b55ef2..105b05d 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -245,15 +245,8 @@ struct omap_dss_board_info {
void (*dsi_mux_pads)(bool enable);
};
-#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
/* Init with the board info */
extern int omap_display_init(struct omap_dss_board_info *board_data);
-#else
-static inline int omap_display_init(struct omap_dss_board_info *board_data)
-{
- return 0;
-}
-#endif
struct omap_display_platform_data {
struct omap_dss_board_info *board_data;
More information about the linux-arm-kernel
mailing list