[PATCH 2/2] mach-cns3xxx: Add demo code for external interrupt pins
Tommy Lin
tommy.lin.1101 at gmail.com
Wed Aug 10 15:50:06 EDT 2011
This patch add the demo code to use CNS3XXX external interrupts
which is connect to internal MPCore GIC. The external interrupt
pin also shared with GPIO function. This program uses GPIO
interrupt to implemet similar interrupt service routine with
external interrupt.
Signed-off-by: Tommy Lin <tommy.lin.1101 at gmail.com>
---
arch/arm/configs/cns3420vb_defconfig | 1 +
arch/arm/mach-cns3xxx/Kconfig | 11 ++
arch/arm/mach-cns3xxx/Makefile | 1 +
arch/arm/mach-cns3xxx/ext_intr.c | 238 ++++++++++++++++++++++++++++++++++
4 files changed, 251 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-cns3xxx/ext_intr.c
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
index c83d14c..6eefa7e 100644
--- a/arch/arm/configs/cns3420vb_defconfig
+++ b/arch/arm/configs/cns3420vb_defconfig
@@ -21,6 +21,7 @@ CONFIG_MODVERSIONS=y
CONFIG_IOSCHED_CFQ=m
CONFIG_ARCH_CNS3XXX=y
CONFIG_MACH_CNS3420VB=y
+CONFIG_CNS3XXX_EXT_INTR_DEMO=m
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 29b13f2..6d762af 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -10,4 +10,15 @@ config MACH_CNS3420VB
This is a platform with an on-board ARM11 MPCore and has support
for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
+config CNS3XXX_EXT_INTR_DEMO
+ tristate "External interrupt demo program"
+ depends on MACH_CNS3420VB
+ select GPIO_CNS3XXX
+ help
+ This program hooks interrupt service routine to external interrupts
+ 0 ~ 3.
+ Name EVB Trigger type ISR
+ Ext_Int0 Rising edge
+ Ext_Int1 Push button S3 Rising edge Toggle LED D6
+ Ext_Int2 Push button S4 High level Toggle LED D7
endmenu
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
index 11033f1..41cc9b1 100644
--- a/arch/arm/mach-cns3xxx/Makefile
+++ b/arch/arm/mach-cns3xxx/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o devices.o
obj-$(CONFIG_PCI) += pcie.o
obj-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
+obj-$(CONFIG_CNS3XXX_EXT_INTR_DEMO) += ext_intr.o
diff --git a/arch/arm/mach-cns3xxx/ext_intr.c b/arch/arm/mach-cns3xxx/ext_intr.c
new file mode 100644
index 0000000..6235ef5
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/ext_intr.c
@@ -0,0 +1,238 @@
+/*******************************************************************************
+ *
+ * arch/arm/mach-cns3xxx/ext_intr.c
+ *
+ * External interrupt driver for the CNS3XXX SOCs
+ *
+ * Copyright (c) 2011 Cavium
+ * Tommy Lin <tommy.lin at caviumnetworks.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
+ * visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium for more information
+ *
+ ******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+
+/* CNS3XXX has three external interrupt pins, Ext_Intr0, Ext_Intr1 and
+ * Ext_Intr3. Each pin has its own interrupt ID which is not shared with other
+ * function. It is not like 32 gpio pins in group A or B shared one irq. The
+ * external interrupt pins are special functions that shared with GPIOB[27:29].
+ * Users could turn on shared pin function to enable external interrupt pin with
+ * cns3xxx_sharepin_request API.
+ *
+ * The external interrupt trigger method is controlled by ARM MPCore GIC. GIC
+ * only suppot high active level trigger and rising edge trigger type. Configure
+ * GIC with other trigger type will have no effect.
+ *
+ * Name irq Shared gpio pin
+ * Ext_Intr0 93 GPIOB[29]
+ * Ext_Intr1 94 GPIOB[28]
+ * Ext_Intr2 95 GPIOB[27]
+ */
+
+
+#define FUNCTION_MODE
+
+struct ext_intr_data {
+ int irq;
+ unsigned gpio;
+ char *name;
+ char *alias;
+};
+
+static unsigned led_D6 = GPIOA(6);
+static unsigned led_D7 = GPIOA(5);
+
+static struct ext_intr_data eintr_data[] = {
+ {IRQ_CNS3XXX_EXTERNAL_PIN0, GPIOB(29), "Ext_Intr0", "HIB_REQ"},
+ {IRQ_CNS3XXX_EXTERNAL_PIN1, GPIOB(28), "Ext_Intr1", "Push Button S3"},
+ {IRQ_CNS3XXX_EXTERNAL_PIN2, GPIOB(27), "Ext_Intr2", "Push Button S4"},
+};
+
+static irqreturn_t cns3xxx_ext_intr0_handler(int irq, void *d)
+{
+ struct ext_intr_data *data = d;
+
+ printk(KERN_INFO "%s detected!\n", data->alias);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t cns3xxx_ext_intr1_handler(int irq, void *d)
+{
+ int value;
+
+ value = gpio_get_value(led_D6);
+
+ gpio_set_value(led_D6, !value);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t cns3xxx_ext_intr2_handler(int irq, void *d)
+{
+ int value;
+
+ value = gpio_get_value(led_D7);
+
+ gpio_set_value(led_D7, !value);
+
+ return IRQ_HANDLED;
+}
+
+
+int __init cns3xxx_eintr_init(void)
+{
+ int ret;
+
+ ret = gpio_request(led_D6, "EINTR Test LED(D6)");
+ if (ret)
+ goto err1;
+ gpio_direction_output(led_D6, 0);
+
+ ret = gpio_request(led_D7, "EINTR Test LED(D7)");
+ if (ret)
+ goto err2;
+ gpio_direction_output(led_D7, 0);
+
+ /************ Ext_Intr0 ************/
+ ret = cns3xxx_sharepin_request(eintr_data[0].gpio, eintr_data[0].alias);
+ if (ret)
+ goto err3;
+
+ ret = request_irq(eintr_data[0].irq, cns3xxx_ext_intr0_handler,
+ IRQF_SHARED | IRQF_TRIGGER_RISING,
+ eintr_data[0].name, &eintr_data[0]);
+ if (ret)
+ goto err4;
+
+#ifdef FUNCTION_MODE
+ /************ Ext_Intr1 ************/
+ ret = cns3xxx_sharepin_request(eintr_data[1].gpio, eintr_data[1].alias);
+ if (ret)
+ goto err5;
+
+ ret = request_irq(eintr_data[1].irq, cns3xxx_ext_intr1_handler,
+ /* Avaliable trigger type settings
+ IRQF_SHARED | IRQF_TRIGGER_RISING,
+ IRQF_SHARED | IRQF_TRIGGER_HIGH,
+ */
+ IRQF_SHARED | IRQF_TRIGGER_RISING,
+ eintr_data[1].name, &eintr_data[1]);
+ if (ret)
+ goto err6;
+
+ /************ Ext_Intr2 ************/
+ ret = cns3xxx_sharepin_request(eintr_data[2].gpio, eintr_data[2].alias);
+ if (ret)
+ goto err7;
+
+ ret = request_irq(eintr_data[2].irq, cns3xxx_ext_intr2_handler,
+ IRQF_SHARED | IRQF_TRIGGER_HIGH,
+ eintr_data[2].name, &eintr_data[2]);
+ if (ret)
+ goto err8;
+#else
+ /* Using GPIOB[28] to do the similar job with Ext_Intr1.
+ * Here source code setup GPIOB[28] interrupt trigger type to both edge.
+ * The both edge interrupt type will trigger interrupt with rising or
+ * falling edge which is not acceptable with Ext_IntrX pins(GIC).
+ */
+ cns3xxx_sharepin_free(eintr_data[1].gpio);
+ ret = gpio_request(GPIOB(28), "Interrupt Test1");
+ if (ret)
+ goto err5;
+
+ ret = request_irq(gpio_to_irq(GPIOB(28)), cns3xxx_ext_intr1_handler,
+ /* Avaliable trigger type settings
+ IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_SHARED | IRQF_TRIGGER_RISING,
+ IRQF_SHARED | IRQF_TRIGGER_FALLING,
+ IRQF_SHARED | IRQF_TRIGGER_HIGH,
+ IRQF_SHARED | IRQF_TRIGGER_LOw,
+ */
+ IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "GPIOB-28", &eintr_data[1]);
+ if (ret)
+ goto err6;
+
+ /* Using GPIOB[27] to do the same job with Ext_Intr0. */
+ cns3xxx_sharepin_free(eintr_data[2].gpio);
+ ret = gpio_request(GPIOB(27), "Interrupt Test0");
+ if (ret)
+ goto err9;
+
+ ret = request_irq(gpio_to_irq(GPIOB(27)), cns3xxx_ext_intr2_handler,
+ IRQF_SHARED | IRQF_TRIGGER_HIGH,
+ "GPIOB-27", &eintr_data[2]);
+ if (ret)
+ goto err10;
+#endif
+
+ return 0;
+
+#ifdef FUNCTION_MODE
+err8:
+ cns3xxx_sharepin_free(eintr_data[2].gpio);
+err7:
+ free_irq(eintr_data[1].irq, &eintr_data[1]);
+#else
+err10:
+ gpio_free(GPIOB(27));
+err9:
+ free_irq(gpio_to_irq(GPIOB(28)), &eintr_data[1]);
+#endif
+err6:
+ cns3xxx_sharepin_free(eintr_data[1].gpio);
+err5:
+ free_irq(eintr_data[0].irq, &eintr_data[0]);
+err4:
+ cns3xxx_sharepin_free(eintr_data[0].gpio);
+err3:
+ gpio_free(led_D7);
+err2:
+ gpio_free(led_D6);
+err1:
+ return ret;
+}
+
+void __exit cns3xxx_eintr_exit(void)
+{
+#ifdef FUNCTION_MODE
+ free_irq(eintr_data[2].irq, &eintr_data[2]);
+ free_irq(eintr_data[1].irq, &eintr_data[1]);
+#else
+ free_irq(gpio_to_irq(GPIOB(27)), &eintr_data[1]);
+ free_irq(gpio_to_irq(GPIOB(28)), &eintr_data[1]);
+#endif
+ free_irq(eintr_data[0].irq, &eintr_data[0]);
+ cns3xxx_sharepin_free(eintr_data[2].gpio);
+ cns3xxx_sharepin_free(eintr_data[1].gpio);
+ cns3xxx_sharepin_free(eintr_data[0].gpio);
+ gpio_free(led_D7);
+ gpio_free(led_D6);
+}
+
+module_init(cns3xxx_eintr_init);
+module_exit(cns3xxx_eintr_exit);
+
+MODULE_LICENSE("GPL");
+
--
1.7.6
More information about the linux-arm-kernel
mailing list