[PATCH 2/2] omap_twl: Prevent SR to enable for am3517/am3505 devices

Kevin Hilman khilman at ti.com
Mon Aug 22 18:48:40 EDT 2011


"Koyamangalath, Abhilash" <abhilash.kv at ti.com> writes:

> Kevin Hilman wrote:
>>Abhilash K V <abhilash.kv at ti.com> writes:
>> 
>> > From: Vaibhav Hiremath <hvaibhav at ti.com>
>> >
>> > In case of AM3517 & AM3505, Smart Reflex is not applicable so
>> > we must not enable it. So add check for am3517/05 cpu revision
>> > in omap3_twl_init() and return -ENODEV if true, else continue.
>> >
>> > Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
>> > Signed-off-by: Abhilash K V <abhilash.kv at ti.com>
>> > ---
>> >  arch/arm/mach-omap2/omap_twl.c |    8 ++++++++
>> >  1 files changed, 8 insertions(+), 0 deletions(-)
>> >
>> > diff --git a/arch/arm/mach-omap2/omap_twl.c
>> b/arch/arm/mach-omap2/omap_twl.c
>> > index 07d6140..92fadcb 100644
>> > --- a/arch/arm/mach-omap2/omap_twl.c
>> > +++ b/arch/arm/mach-omap2/omap_twl.c
>> > @@ -269,6 +269,14 @@ int __init omap3_twl_init(void)
>> >        if (!cpu_is_omap34xx())
>> >                return -ENODEV;
>> > 
>> > +     /*
>> > +      * In case of AM3517/AM3505 we should not be going down
>> > +      * further, since SR is not applicable there.
>> > +      */
>> > +     if (cpu_is_omap3505() || cpu_is_omap3517()) {
>> > +             return -ENODEV;
>> > +     }
>> > +
>> 
>> Rather than using cpu_is_*, you should add a new "feature" flag for
>> SmartReflex.  We already have this for things like SGX, IVA, NEON, etc.
>> See <plat/feature.h>
> I did not find a feature.h; 

sorry, I meant <plat/cpu.yh>

> did you mean OMAP3_CHECK_FEATURE macro which is used by
> omap3_check_features(), which gleans for presence of L2CACHE, IVA, SGX, NEON, ISP features
> from the Control Device Status Register (0x4800 244C) ?

yes, OMAP3_HAS_FEATURE()

> There is no such bit-field to indicate the presence of smart-reflex feature in this register.
> AFAIK, there is no such global register as well which could indicate this.

There doesn't have to be a register read to indicate this.  See for
example the HAS_IO_WAKEUP feature.

Kevin


> - Abhilash
>
>> Kevin
>> 
>> 
>> >        if (cpu_is_omap3630()) {
>> >                omap3_mpu_volt_info.vp_vddmin =
>> OMAP3630_VP1_VLIMITTO_VDDMIN;
>> >                omap3_mpu_volt_info.vp_vddmax =
>> OMAP3630_VP1_VLIMITTO_VDDMAX; 
>> 
>> 



More information about the linux-arm-kernel mailing list