[PATCH 3/4 v4] amba: request muxing for PrimeCell devices
Linus Walleij
linus.walleij at stericsson.com
Fri Aug 19 05:54:13 EDT 2011
From: Linus Walleij <linus.walleij at linaro.org>
This makes the AMBA PrimeCell drivers request padmuxing for
themselves in the same manner as clocks and voltage is currently
requested.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
drivers/amba/bus.c | 49 ++++++++++++++++++++++++++++++++++++++++++++-
include/linux/amba/bus.h | 2 +
2 files changed, 49 insertions(+), 2 deletions(-)
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index d74926e..bd0516c 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -474,6 +474,40 @@ static void amba_put_disable_vcore(struct amba_device *pcdev)
}
}
+static int amba_get_enable_pinmux(struct amba_device *pcdev)
+{
+ struct pinmux *pmx = pinmux_get(&pcdev->dev, NULL);
+ int ret;
+
+ pcdev->pmx = pmx;
+
+ if (IS_ERR(pmx)) {
+ /* It is OK not to supply a pinmux regulator */
+ if (PTR_ERR(pmx) == -ENODEV)
+ return 0;
+ return PTR_ERR(pmx);
+ }
+
+ ret = pinmux_enable(pmx);
+ if (ret) {
+ pinmux_put(pmx);
+ pcdev->pmx = ERR_PTR(-ENODEV);
+ }
+
+ return ret;
+}
+
+static void amba_put_disable_pinmux(struct amba_device *pcdev)
+{
+ struct pinmux *pmx = pcdev->pmx;
+
+ if (!IS_ERR(pmx)) {
+ pinmux_disable(pmx);
+ pinmux_put(pmx);
+ }
+}
+
+
/*
* These are the device model conversion veneers; they convert the
* device model structures to our more specific structures.
@@ -486,13 +520,22 @@ static int amba_probe(struct device *dev)
int ret;
do {
- ret = amba_get_enable_vcore(pcdev);
+ ret = amba_get_enable_pinmux(pcdev);
if (ret)
break;
+ ret = amba_get_enable_vcore(pcdev);
+ if (ret) {
+ amba_put_disable_pinmux(pcdev);
+ break;
+ }
+
ret = amba_get_enable_pclk(pcdev);
- if (ret)
+ if (ret) {
+ amba_put_disable_pinmux(pcdev);
+ amba_put_disable_vcore(pcdev);
break;
+ }
ret = pcdrv->probe(pcdev, id);
if (ret == 0)
@@ -500,6 +543,7 @@ static int amba_probe(struct device *dev)
amba_put_disable_pclk(pcdev);
amba_put_disable_vcore(pcdev);
+ amba_put_disable_pinmux(pcdev);
} while (0);
return ret;
@@ -513,6 +557,7 @@ static int amba_remove(struct device *dev)
amba_put_disable_pclk(pcdev);
amba_put_disable_vcore(pcdev);
+ amba_put_disable_pinmux(pcdev);
return ret;
}
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index fcbbe71..35f1193 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -19,6 +19,7 @@
#include <linux/err.h>
#include <linux/resource.h>
#include <linux/regulator/consumer.h>
+#include <linux/pinctrl/pinmux.h>
#define AMBA_NR_IRQS 2
#define AMBA_CID 0xb105f00d
@@ -30,6 +31,7 @@ struct amba_device {
struct resource res;
struct clk *pclk;
struct regulator *vcore;
+ struct pinmux *pmx;
u64 dma_mask;
unsigned int periphid;
unsigned int irq[AMBA_NR_IRQS];
--
1.7.3.2
More information about the linux-arm-kernel
mailing list