[PATCH V2 6/6] spi/spi-pl022: Request/free DMA channels as and when required.

[Russell King - ARM Linux]

On Wed, Aug 10, 2011 at 04:01:13PM +0530, Jassi Brar wrote:
> On Wed, Aug 10, 2011 at 3:31 PM, Koul, Vinod <vinod.koul at intel.com> wrote:
> > On Wed, 2011-08-10 at 14:59 +0530, viresh kumar wrote:
> >> On 08/10/2011 02:30 PM, Russell King - ARM Linux wrote:
> >> >> > They must be allocated when they are required and must be freed after we are
> >> >> > done with transfers. So that they can be used by other users.
> >> > Which DMA engine driver requires this?
> >> >
> >>
> >> dw_dmac.c
> >>
> >> > Normally, when we have DMA engine drivers with multiple request signals,
> >> > the slave peripheral side publishes several virtual channels which are
> >> > claimed by the peripheral drivers.  This (amongst other things) allows
> >> > the peripheral drivers to hold claim to one of the virtual channels
> >> > all the time that it's required.
> >>
> >> If users of DMA expect DMA engine drivers to work this way, then we should
> >> have this mentioned clearly in DMA slave documentation.
> >>
> >> @Dan/Vinod: What do you say?
> > I would agree on both counts :)
> >
> > In some cases it does make sense to hold the channel for the lifetime
> > like uart or where the channel has been tied to an interface by SoC
> > designer.
> > But in some cases like dw_dmac it seems you can assign channels
> > dynamically to each usage, and runtime allocation ensures we have best
> > utilization.
> > So i would argue that there is no "one size fits all" here, if you can
> > manage channels dynamically and utilize more efficiently then go ahead,
> > but if you cant (h/w and usage constraint) then you should not be forced
> > to do so.
> 
> The idea is to have channel allocation as purely a s/w thing - no
> actual commitment
> of h/w resources. So we can afford to have channel allocated for the
> whole lifetime
> of a client.
> 
> Some dmac drivers are written 'improperly', keeping in mind the
> platforms that have fixed
> ReqSig->Peri map and no more clients than actual req-sigs are active
> simultaneously.
> But such dmac drivers will fail if a new platform decides to hijack req-signals.
> 
> So, imho, it is absolutely a good thing for every dmac driver to be
> designed for re-routable
> ReqSig->Peri map... which would force their design to allocate
> virtual/software channels to clients
> without commit much(any?) h/w resources.

We discussed channel allocation at Linaro.  However, I am now _really_
disappointed.

I discussed this with Linus on the bus back from Cambridge in the evening,
and it appears that the story you gave me was inaccurate - Linus had not
agreed to your proposal and saw more or less the same problems with it
which I've been on at you about via your other email alias/lkml.  So that's
essentially invalidated everything we discussed there as part of my thinking
was "if Linus is happy with it, then...".

I am now convinced that you'll say *anything* just to get your idea into
the kernel.

So, the stakes have now been raised further for you: what I want to see
from you is a _working_ _implementation_ for those three platforms which
I outlined.  I don't want more discussion.  I want patches from you.
Nothing else.  We'll then review the code changes themselves rather than
a vague idea communicated by email/verbally.