[PATCH v3 1/2] arm/mx5: add device tree support for imx53 boards
Shawn Guo
shawn.guo at linaro.org
Mon Aug 1 15:17:31 EDT 2011
From: Shawn Guo <shawn.guo at freescale.com>
It adds device tree support for imx53 boards.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
Cc: Grant Likely <grant.likely at secretlab.ca>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
---
.../devicetree/bindings/arm/fsl/boards.txt | 15 ++
arch/arm/boot/dts/imx53-ard.dts | 158 +++++++++++++
arch/arm/boot/dts/imx53-evk.dts | 144 ++++++++++++
arch/arm/boot/dts/imx53-qsb.dts | 148 ++++++++++++
arch/arm/boot/dts/imx53-smd.dts | 169 ++++++++++++++
arch/arm/boot/dts/imx53.dtsi | 244 ++++++++++++++++++++
arch/arm/mach-mx5/Kconfig | 12 +
arch/arm/mach-mx5/Makefile | 2 +
arch/arm/mach-mx5/board-mx53_ard.c | 9 +-
arch/arm/mach-mx5/board-mx53_evk.c | 5 +
arch/arm/mach-mx5/board-mx53_loco.c | 5 +
arch/arm/mach-mx5/board-mx53_smd.c | 5 +
arch/arm/mach-mx5/imx53-dt.c | 143 ++++++++++++
arch/arm/plat-mxc/include/mach/common.h | 2 +
arch/arm/plat-mxc/include/mach/iomux-mx53.h | 5 +
arch/arm/plat-mxc/include/mach/iomux-v3.h | 5 +
16 files changed, 1069 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/fsl/boards.txt
create mode 100644 arch/arm/boot/dts/imx53-ard.dts
create mode 100644 arch/arm/boot/dts/imx53-evk.dts
create mode 100644 arch/arm/boot/dts/imx53-qsb.dts
create mode 100644 arch/arm/boot/dts/imx53-smd.dts
create mode 100644 arch/arm/boot/dts/imx53.dtsi
create mode 100644 arch/arm/mach-mx5/imx53-dt.c
diff --git a/Documentation/devicetree/bindings/arm/fsl/boards.txt b/Documentation/devicetree/bindings/arm/fsl/boards.txt
new file mode 100644
index 0000000..d1e8d6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fsl/boards.txt
@@ -0,0 +1,15 @@
+i.MX53 Automotive Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-ard", "fsl,imx53";
+
+i.MX53 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx53-evk", "fsl,imx53";
+
+i.MX53 Quick Start Board
+Required root node properties:
+ - compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+i.MX53 Smart Mobile Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-smd", "fsl,imx53";
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
new file mode 100644
index 0000000..fd0cf2c
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Automotive Reference Design Board";
+ compatible = "fsl,imx53-ard", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ aips at 50000000 { /* AIPS1 */
+ spba at 50000000 {
+ esdhc at 50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */
+ wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */
+ };
+
+ esdhc at 50008000 { /* ESDHC2 */
+ status = "disabled";
+ };
+
+ uart2: uart at 5000c000 { /* UART3 */
+ status = "disabled";
+ };
+
+ ecspi at 50010000 { /* ECSPI1 */
+ status = "disabled";
+ };
+
+ esdhc at 50020000 { /* ESDHC3 */
+ status = "disabled";
+ };
+
+ esdhc at 50024000 { /* ESDHC4 */
+ status = "disabled";
+ };
+ };
+
+ iomuxc at 53fa8000 {
+ compatible = "fsl,imx53-iomuxc-ard";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart1: uart at 53fc0000 { /* UART2 */
+ status = "disabled";
+ };
+
+ i2c at 53fec000 { /* I2C3 */
+ status = "disabled";
+ };
+
+ uart3: uart at 53ff0000 { /* UART4 */
+ status = "disabled";
+ };
+ };
+
+ aips at 60000000 { /* AIPS2 */
+ uart4: uart at 63f90000 { /* UART5 */
+ status = "disabled";
+ };
+
+ ecspi at 63fac000 { /* ECSPI2 */
+ status = "disabled";
+ };
+
+ sdma at 63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ cspi at 63fc0000 {
+ status = "disabled";
+ };
+
+ i2c at 63fc4000 { /* I2C2 */
+ status = "disabled";
+ };
+
+ i2c at 63fc8000 { /* I2C1 */
+ status = "disabled";
+ };
+
+ fec at 63fec000 {
+ status = "disabled";
+ };
+ };
+
+ eim-cs1 at f4000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eim-bus", "simple-bus";
+ reg = <0xf4000000 0x3ff0000>;
+ ranges;
+
+ lan9220 at f4000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0xf4000000 0x2000000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio1>;
+ interrupts = <31>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ home {
+ label = "Home";
+ gpios = <&gpio4 10 0>; /* GPIO5_10 */
+ linux,code = <102>; /* KEY_HOME */
+ gpio-key,wakeup;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio4 11 0>; /* GPIO5_11 */
+ linux,code = <158>; /* KEY_BACK */
+ gpio-key,wakeup;
+ };
+
+ program {
+ label = "Program";
+ gpios = <&gpio4 12 0>; /* GPIO5_12 */
+ linux,code = <362>; /* KEY_PROGRAM */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio4 13 0>; /* GPIO5_13 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio3 0 0>; /* GPIO4_0 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
new file mode 100644
index 0000000..5b51588
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Evaluation Kit";
+ compatible = "fsl,imx53-evk", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x80000000>;
+ };
+
+ aips at 50000000 { /* AIPS1 */
+ spba at 50000000 {
+ esdhc at 50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */
+ };
+
+ esdhc at 50008000 { /* ESDHC2 */
+ status = "disabled";
+ };
+
+ uart2: uart at 5000c000 { /* UART3 */
+ status = "disabled";
+ };
+
+ ecspi at 50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+
+ flash: at45db321d at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc at 50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ };
+
+ esdhc at 50024000 { /* ESDHC4 */
+ status = "disabled";
+ };
+ };
+
+ iomuxc at 53fa8000 {
+ compatible = "fsl,imx53-iomuxc-evk";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart1: uart at 53fc0000 { /* UART2 */
+ status = "disabled";
+ };
+
+ i2c at 53fec000 { /* I2C3 */
+ status = "disabled";
+ };
+
+ uart3: uart at 53ff0000 { /* UART4 */
+ status = "disabled";
+ };
+ };
+
+ aips at 60000000 { /* AIPS2 */
+ uart4: uart at 63f90000 { /* UART5 */
+ status = "disabled";
+ };
+
+ ecspi at 63fac000 { /* ECSPI2 */
+ status = "disabled";
+ };
+
+ sdma at 63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ cspi at 63fc0000 {
+ status = "disabled";
+ };
+
+ i2c at 63fc4000 { /* I2C2 */
+ pmic: mc13892 at 08 {
+ compatible = "fsl,mc13892", "fsl,mc13xxx";
+ reg = <0x08>;
+ };
+
+ codec: sgtl5000 at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ i2c at 63fc8000 { /* I2C1 */
+ status = "disabled";
+ };
+
+ fec at 63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
new file mode 100644
index 0000000..035de71
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Quick Start Board";
+ compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ aips at 50000000 { /* AIPS1 */
+ spba at 50000000 {
+ esdhc at 50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ };
+
+ esdhc at 50008000 { /* ESDHC2 */
+ status = "disabled";
+ };
+
+ uart2: uart at 5000c000 { /* UART3 */
+ status = "disabled";
+ };
+
+ ecspi at 50010000 { /* ECSPI1 */
+ status = "disabled";
+ };
+
+ esdhc at 50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ };
+
+ esdhc at 50024000 { /* ESDHC4 */
+ status = "disabled";
+ };
+ };
+
+ iomuxc at 53fa8000 {
+ compatible = "fsl,imx53-iomuxc-qsb";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart1: uart at 53fc0000 { /* UART2 */
+ status = "disabled";
+ };
+
+ i2c at 53fec000 { /* I2C3 */
+ status = "disabled";
+ };
+
+ uart3: uart at 53ff0000 { /* UART4 */
+ status = "disabled";
+ };
+ };
+
+ aips at 60000000 { /* AIPS2 */
+ uart4: uart at 63f90000 { /* UART5 */
+ status = "disabled";
+ };
+
+ ecspi at 63fac000 { /* ECSPI2 */
+ status = "disabled";
+ };
+
+ sdma at 63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ cspi at 63fc0000 {
+ status = "disabled";
+ };
+
+ i2c at 63fc4000 { /* I2C2 */
+ codec: sgtl5000 at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ i2c at 63fc8000 { /* I2C1 */
+ accelerometer: mma8450 at 1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ pmic: dialog at 48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec at 63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
new file mode 100644
index 0000000..b2af475
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Smart Mobile Reference Design Board";
+ compatible = "fsl,imx53-smd", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ aips at 50000000 { /* AIPS1 */
+ spba at 50000000 {
+ esdhc at 50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */
+ };
+
+ esdhc at 50008000 { /* ESDHC2 */
+ fsl,card-wired;
+ };
+
+ uart2: uart at 5000c000 { /* UART3 */
+ fsl,uart-has-rtscts;
+ };
+
+ ecspi at 50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+
+ zigbee: mc1323 at 0 {
+ compatible = "fsl,mc1323";
+ spi-max-frequency = <8000000>;
+ reg = <0>;
+ };
+
+ flash: m25p32 at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32", "st,m25p";
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc at 50020000 { /* ESDHC3 */
+ fsl,card-wired;
+ };
+
+ esdhc at 50024000 { /* ESDHC4 */
+ status = "disabled";
+ };
+ };
+
+ iomuxc at 53fa8000 {
+ compatible = "fsl,imx53-iomuxc-smd";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ i2c at 53fec000 { /* I2C3 */
+ status = "disabled";
+ };
+
+ uart3: uart at 53ff0000 { /* UART4 */
+ status = "disabled";
+ };
+ };
+
+ aips at 60000000 { /* AIPS2 */
+ uart4: uart at 63f90000 { /* UART5 */
+ status = "disabled";
+ };
+
+ ecspi at 63fac000 { /* ECSPI2 */
+ status = "disabled";
+ };
+
+ sdma at 63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ cspi at 63fc0000 {
+ status = "disabled";
+ };
+
+ i2c at 63fc4000 { /* I2C2 */
+ codec: sgtl5000 at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+
+ magnetometer: mag3110 at 0e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ };
+
+ touchkey: mpr121 at 5a {
+ compatible = "fsl,mpr121";
+ reg = <0x5a>;
+ };
+ };
+
+ i2c at 63fc8000 { /* I2C1 */
+ accelerometer: mma8450 at 1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ camera: ov5642 at 3c {
+ compatible = "ovti,ov5642";
+ reg = <0x3c>;
+ };
+
+ pmic: dialog at 48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec at 63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
new file mode 100644
index 0000000..41383b5
--- /dev/null
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&tzic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ tzic: tz-interrupt-controller at 0fffc000 {
+ compatible = "fsl,imx53-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x0fffc000 0x4000>;
+ };
+
+ aips at 50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ spba at 50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc at 50004000 { /* ESDHC1 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ };
+
+ esdhc at 50008000 { /* ESDHC2 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ };
+
+ uart2: uart at 5000c000 { /* UART3 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ };
+
+ ecspi at 50010000 { /* ECSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ };
+
+ esdhc at 50020000 { /* ESDHC3 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ };
+
+ esdhc at 50024000 { /* ESDHC4 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ };
+ };
+
+ gpio0: gpio at 53f84000 { /* GPIO1 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio at 53f88000 { /* GPIO2 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio at 53f8c000 { /* GPIO3 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio at 53f90000 { /* GPIO4 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ wdt at 53f98000 { /* WDOG1 */
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ };
+
+ uart0: uart at 53fbc000 { /* UART1 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ };
+
+ uart1: uart at 53fc0000 { /* UART2 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ };
+
+ gpio4: gpio at 53fdc000 { /* GPIO5 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fdc000 0x4000>;
+ interrupts = <103 104>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio at 53fe0000 { /* GPIO6 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe0000 0x4000>;
+ interrupts = <105 106>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio at 53fe4000 { /* GPIO7 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe4000 0x4000>;
+ interrupts = <107 108>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ i2c at 53fec000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x53fec000 0x4000>;
+ interrupts = <64>;
+ };
+
+ uart3: uart at 53ff0000 { /* UART4 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ };
+ };
+
+ aips at 60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ uart4: uart at 63f90000 { /* UART5 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ };
+
+ ecspi at 63fac000 { /* ECSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ };
+
+ sdma at 63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ cspi at 63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ };
+
+ i2c at 63fc4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc4000 0x4000>;
+ interrupts = <63>;
+ };
+
+ i2c at 63fc8000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc8000 0x4000>;
+ interrupts = <62>;
+ };
+
+ fec at 63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ };
+ };
+};
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index b4e7c58..0ac676c 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -172,6 +172,18 @@ endif # ARCH_MX51
if ARCH_MX53_SUPPORTED
comment "i.MX53 machines:"
+config MACH_IMX53_DT
+ bool "Support i.MX53 platforms from device tree"
+ select SOC_IMX53
+ select USE_OF
+ select MACH_MX53_ARD
+ select MACH_MX53_EVK
+ select MACH_MX53_LOCO
+ select MACH_MX53_SMD
+ help
+ Include support for Freescale i.MX53 based platforms
+ using the device tree for discovery
+
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 383e7cd..3dbe5e2 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -22,3 +22,5 @@ obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 76a67c4..71e61f9 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -104,6 +104,11 @@ static iomux_v3_cfg_t mx53_ard_pads[] = {
MX53_PAD_GPIO_10__GPIO4_0, /* vol down */
};
+struct iomux_v3_pad_data imx53_ard_pad_data = {
+ .pads = mx53_ard_pads,
+ .num = ARRAY_SIZE(mx53_ard_pads),
+};
+
#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
{ \
.gpio = gpio_num, \
@@ -182,7 +187,7 @@ static void __init mx53_ard_io_init(void)
}
/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
+int imx53_ard_weim_cs_config(void)
{
u32 reg;
void __iomem *weim_base, *iomuxc_base;
@@ -226,7 +231,7 @@ static void __init mx53_ard_board_init(void)
imx53_add_imx_uart(0, NULL);
mx53_ard_io_init();
- weim_cs_config();
+ imx53_ard_weim_cs_config();
platform_add_devices(devices, ARRAY_SIZE(devices));
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 1b417b0..09c293f 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -63,6 +63,11 @@ static iomux_v3_cfg_t mx53_evk_pads[] = {
MX53_PAD_PATA_DA_1__GPIO7_7,
};
+struct iomux_v3_pad_data imx53_evk_pad_data = {
+ .pads = mx53_evk_pads,
+ .num = ARRAY_SIZE(mx53_evk_pads),
+};
+
static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 4e1d51d..bf0196b 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -187,6 +187,11 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
MX53_PAD_GPIO_8__GPIO1_8,
};
+struct iomux_v3_pad_data imx53_loco_pad_data = {
+ .pads = mx53_loco_pads,
+ .num = ARRAY_SIZE(mx53_loco_pads),
+};
+
#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
{ \
.gpio = gpio_num, \
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index bc02894..a3fa95d 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -77,6 +77,11 @@ static iomux_v3_cfg_t mx53_smd_pads[] = {
MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
};
+struct iomux_v3_pad_data imx53_smd_pad_data = {
+ .pads = mx53_smd_pads,
+ .num = ARRAY_SIZE(mx53_smd_pads),
+};
+
static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
new file mode 100644
index 0000000..eece3db
--- /dev/null
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx53.h>
+#include <mach/iomux-mx53.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx53_tzic_of_match[] __initconst = {
+ { .compatible = "fsl,imx53-tzic", },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx53_gpio_of_match[] __initconst = {
+ { .compatible = "fsl,imx53-gpio", },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
+ { .compatible = "fsl,imx53-iomuxc-ard", .data = &imx53_ard_pad_data, },
+ { .compatible = "fsl,imx53-iomuxc-evk", .data = &imx53_evk_pad_data, },
+ { .compatible = "fsl,imx53-iomuxc-qsb", .data = &imx53_loco_pad_data, },
+ { .compatible = "fsl,imx53-iomuxc-smd", .data = &imx53_smd_pad_data, },
+ { /* sentinel */ }
+};
+
+static void __init imx53_dt_init(void)
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ struct iomux_v3_pad_data *pad_data;
+ int gpio_irq = MXC_INTERNAL_IRQS + ARCH_NR_GPIOS;
+
+ node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
+ if (node) {
+ of_id = of_match_node(imx53_iomuxc_of_match, node);
+ pad_data = (struct iomux_v3_pad_data *) of_id->data;
+ mxc_iomux_v3_setup_multiple_pads(pad_data->pads, pad_data->num);
+ of_node_put(node);
+ }
+
+ irq_domain_generate_simple(imx53_tzic_of_match, MX53_TZIC_BASE_ADDR, 0);
+ gpio_irq -= 32;
+ irq_domain_generate_simple(imx53_gpio_of_match, MX53_GPIO1_BASE_ADDR, gpio_irq);
+ gpio_irq -= 32;
+ irq_domain_generate_simple(imx53_gpio_of_match, MX53_GPIO2_BASE_ADDR, gpio_irq);
+ gpio_irq -= 32;
+ irq_domain_generate_simple(imx53_gpio_of_match, MX53_GPIO3_BASE_ADDR, gpio_irq);
+ gpio_irq -= 32;
+ irq_domain_generate_simple(imx53_gpio_of_match, MX53_GPIO4_BASE_ADDR, gpio_irq);
+ gpio_irq -= 32;
+ irq_domain_generate_simple(imx53_gpio_of_match, MX53_GPIO5_BASE_ADDR, gpio_irq);
+ gpio_irq -= 32;
+ irq_domain_generate_simple(imx53_gpio_of_match, MX53_GPIO6_BASE_ADDR, gpio_irq);
+ gpio_irq -= 32;
+ irq_domain_generate_simple(imx53_gpio_of_match, MX53_GPIO7_BASE_ADDR, gpio_irq);
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx53_auxdata_lookup, NULL);
+}
+
+static void __init imx53_ard_init(void)
+{
+ imx53_ard_weim_cs_config();
+ imx53_dt_init();
+}
+
+static void __init imx53_timer_init(void)
+{
+ mx53_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer imx53_timer = {
+ .init = imx53_timer_init,
+};
+
+static const char *imx53_dt_board_compat[] __initdata = {
+ "fsl,imx53-ard",
+ "fsl,imx53-evk",
+ "fsl,imx53-qsb",
+ "fsl,imx53-smd",
+ NULL
+};
+
+DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
+ .map_io = mx53_map_io,
+ .init_early = imx53_init_early,
+ .init_irq = mx53_init_irq,
+ .timer = &imx53_timer,
+ .init_machine = imx53_dt_init,
+ .dt_compat = imx53_dt_board_compat,
+MACHINE_END
+
+DT_MACHINE_START(IMX53_DT_ARD, "Freescale i.MX53 ARD (Device Tree Support)")
+ .map_io = mx53_map_io,
+ .init_early = imx53_init_early,
+ .init_irq = mx53_init_irq,
+ .timer = &imx53_timer,
+ .init_machine = imx53_ard_init,
+ .dt_compat = imx53_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4e3d978..32c24a4 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -72,4 +72,6 @@ extern void mxc_arch_reset_init(void __iomem *);
extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
+extern int imx53_ard_weim_cs_config(void);
+
#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 9440b9e..adcf2c0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -21,6 +21,11 @@
#include <mach/iomux-v3.h>
+extern struct iomux_v3_pad_data imx53_ard_pad_data;
+extern struct iomux_v3_pad_data imx53_evk_pad_data;
+extern struct iomux_v3_pad_data imx53_loco_pad_data;
+extern struct iomux_v3_pad_data imx53_smd_pad_data;
+
/* These 2 defines are for pins that may not have a mux register, but could
* have a pad setting register, and vice-versa. */
#define NON_PAD_I 0x00
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index ebbce33..5689965 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -55,6 +55,11 @@
typedef u64 iomux_v3_cfg_t;
+struct iomux_v3_pad_data {
+ iomux_v3_cfg_t *pads;
+ int num;
+};
+
#define MUX_CTRL_OFS_SHIFT 0
#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
#define MUX_PAD_CTRL_OFS_SHIFT 12
--
1.7.4.1
More information about the linux-arm-kernel
mailing list