Fwd: [RFC/PATCH v2 09/13] dt: omap4: add soc file for handling i2c controllers

Cousson, Benoit b-cousson at ti.com
Tue Aug 23 09:48:15 EDT 2011


From: G, Manjunath Kondaiah<manjugk at ti.com>
> To: devicetree-discuss at lists.ozlabs.org
> CC: linux-omap at vger.kernel.org, linux-arm-kernel at lists.infradead.org
>
>
> Add omap4 soc dts file for handling omap4 soc i2c
> controllers existing on l4-core bus.

The subject and changelog is not accurate. You are doing at least 3 things:
Moving the OMAP4 SoC data from panda board file to a SoC specific 
omap4.dtsi file.
Including the omap4.dtsi into panda.
Adding some i2c nodes.

You should use at least two or three separated patches to avoid 
in-accurate subject.

Benoit


>
> Signed-off-by: G, Manjunath Kondaiah<manjugk at ti.com>
> ---
>    arch/arm/boot/dts/omap4-panda.dts |    7 +---
>    arch/arm/boot/dts/omap4.dtsi      |   68
> +++++++++++++++++++++++++++++++++++++
>    2 files changed, 69 insertions(+), 6 deletions(-)
>    create mode 100644 arch/arm/boot/dts/omap4.dtsi
>
> diff --git a/arch/arm/boot/dts/omap4-panda.dts
> b/arch/arm/boot/dts/omap4-panda.dts
> index 58909e9..c28aa95 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -1,9 +1,4 @@
> -/dts-v1/;
> -
> -/memreserve/ 0x9D000000 0x03000000; /* Frame buffer */
> -/memreserve/ 0xB0000000 0x10000000; /* Top 256MB is unaccessable */
> -
> -/include/ "skeleton.dtsi"
> +/include/ "omap4.dtsi"
>
>    / {
>    	model = "TI OMAP4 PandaBoard";
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> new file mode 100644
> index 0000000..cb055f5
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -0,0 +1,68 @@
> +/*
> + * Device Tree Source for OMAP4 SoC
> + *
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/dts-v1/;
> +
> +/memreserve/ 0x9D000000 0x03000000; /* Frame buffer */
> +/memreserve/ 0xB0000000 0x10000000; /* Top 256MB is unaccessable */

That information was already there previously but where does it come from?
48 MB is clearly not for the FB, and the top 256 MB should be accessible 
with highmem.

Benoit

> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> +	#address-cells =<1>;
> +	#size-cells =<1>;
> +	model = "ti,omap4";
> +
> +	aliases {
> +		i2c1 =&i2c1;
> +		i2c2 =&i2c2;
> +		i2c3 =&i2c3;
> +		i2c4 =&i2c4;
> +	};
> +
> +	l4-core {
> +		compatible = "ti,omap4-l4-core", "sonics,s3220";
> +		#address-cells =<1>;
> +		#size-cells =<1>;
> +		ranges =<0 0x48000000 0x1000000>;
> +
> +		i2c1: i2c at 70000 {
> +			#address-cells =<1>;
> +			#size-cells =<0>;
> +			compatible = "ti,omap-i2c", "ti,omap-device";
> +			reg =<0x70000 0x100>;
> +			interrupts =<  88>;
> +		};
> +
> +		i2c2: i2c at 72000 {
> +			#address-cells =<1>;
> +			#size-cells =<0>;
> +			compatible = "ti,omap-i2c", "ti,omap-device";
> +			reg =<0x72000 0x100>;
> +			interrupts =<  89>;
> +		};
> +
> +		i2c3: i2c at 60000 {
> +			#address-cells =<1>;
> +			#size-cells =<0>;
> +			compatible = "ti,omap-i2c", "ti,omap-device";
> +			reg =<0x60000 0x100>;
> +			interrupts =<  93>;
> +		};
> +
> +		i2c4: i2c at 350000 {
> +			#address-cells =<1>;
> +			#size-cells =<0>;
> +			compatible = "ti,omap-i2c", "ti,omap-device";
> +			reg =<0x350000 0x100>;
> +			interrupts =<  94>;
> +		};
> +	};
> +};




More information about the linux-arm-kernel mailing list