[PATCH] ARM: imx: pwm: Add support for MX53

[Sascha Hauer]

On Tue, Aug 23, 2011 at 01:26:38PM -0300, Fabio Estevam wrote:
> Instead of adding the check for MX53 CPU type, use the negative logic and let 
> PWM to be configured for MX53 as well.

Applied for next.

Sascha

> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  arch/arm/plat-mxc/pwm.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
> index 761c3c9..42d74ea 100644
> --- a/arch/arm/plat-mxc/pwm.c
> +++ b/arch/arm/plat-mxc/pwm.c
> @@ -57,7 +57,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
>  	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
>  		return -EINVAL;
>  
> -	if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
> +	if (!(cpu_is_mx1() || cpu_is_mx21())) {
>  		unsigned long long c;
>  		unsigned long period_cycles, duty_cycles, prescale;
>  		u32 cr;
> -- 
> 1.7.1
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |