[PATCH v7 09/16] ARM: LPAE: MMU setup for the 3-level page table format
Catalin Marinas
catalin.marinas at arm.com
Wed Aug 10 11:03:32 EDT 2011
This patch adds the MMU initialisation for the LPAE page table format.
The swapper_pg_dir size with LPAE is 5 rather than 4 pages. A new
proc-v7lpae.S file contains the initialisation, context switch and
save/restore code for ARMv7 with the LPAE. The TTBRx split is based on
the PAGE_OFFSET with TTBR1 used for the kernel mappings. The 36-bit
mappings (supersections) and a few other memory types in mmu.c are
conditionally compiled.
Signed-off-by: Catalin Marinas <catalin.marinas at arm.com>
---
arch/arm/kernel/head.S | 117 +++++++++----
arch/arm/mm/Makefile | 4 +
arch/arm/mm/mmu.c | 34 ++++-
arch/arm/mm/proc-macros.S | 5 +-
arch/arm/mm/proc-v7lpae.S | 422 +++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 542 insertions(+), 40 deletions(-)
create mode 100644 arch/arm/mm/proc-v7lpae.S
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index d8231b2..0bdafc4 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -21,6 +21,7 @@
#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/system.h>
+#include <asm/pgtable.h>
#ifdef CONFIG_DEBUG_LL
#include <mach/debug-macro.S>
@@ -38,11 +39,20 @@
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
+#ifdef CONFIG_ARM_LPAE
+ /* LPAE requires an additional page for the PGD */
+#define PG_DIR_SIZE 0x5000
+#define PMD_ORDER 3
+#else
+#define PG_DIR_SIZE 0x4000
+#define PMD_ORDER 2
+#endif
+
.globl swapper_pg_dir
- .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
+ .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
.macro pgtbl, rd, phys
- add \rd, \phys, #TEXT_OFFSET - 0x4000
+ add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE
.endm
#ifdef CONFIG_XIP_KERNEL
@@ -148,11 +158,11 @@ __create_page_tables:
pgtbl r4, r8 @ page table address
/*
- * Clear the 16K level 1 swapper page table
+ * Clear the swapper page table
*/
mov r0, r4
mov r3, #0
- add r6, r0, #0x4000
+ add r6, r0, #PG_DIR_SIZE
1: str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
@@ -160,6 +170,25 @@ __create_page_tables:
teq r0, r6
bne 1b
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Build the PGD table (first level) to point to the PMD table. A PGD
+ * entry is 64-bit wide.
+ */
+ mov r0, r4
+ add r3, r4, #0x1000 @ first PMD table address
+ orr r3, r3, #3 @ PGD block type
+ mov r6, #4 @ PTRS_PER_PGD
+ mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER
+1: str r3, [r0], #4 @ set bottom PGD entry bits
+ str r7, [r0], #4 @ set top PGD entry bits
+ add r3, r3, #0x1000 @ next PMD table
+ subs r6, r6, #1
+ bne 1b
+
+ add r4, r4, #0x1000 @ point to the PMD tables
+#endif
+
ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
@@ -171,30 +200,30 @@ __create_page_tables:
sub r0, r0, r3 @ virt->phys offset
add r5, r5, r0 @ phys __enable_mmu
add r6, r6, r0 @ phys __enable_mmu_end
- mov r5, r5, lsr #20
- mov r6, r6, lsr #20
+ mov r5, r5, lsr #SECTION_SHIFT
+ mov r6, r6, lsr #SECTION_SHIFT
-1: orr r3, r7, r5, lsl #20 @ flags + kernel base
- str r3, [r4, r5, lsl #2] @ identity mapping
- teq r5, r6
- addne r5, r5, #1 @ next section
- bne 1b
+1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base
+ str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping
+ cmp r5, r6
+ addlo r5, r5, #SECTION_SHIFT >> 20 @ next section
+ blo 1b
/*
* Now setup the pagetables for our kernel direct
* mapped region.
*/
mov r3, pc
- mov r3, r3, lsr #20
- orr r3, r7, r3, lsl #20
- add r0, r4, #(KERNEL_START & 0xff000000) >> 18
- str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
+ mov r3, r3, lsr #SECTION_SHIFT
+ orr r3, r7, r3, lsl #SECTION_SHIFT
+ add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
+ str r3, [r0, #(KERNEL_START & 0x00e00000) >> (SECTION_SHIFT - PMD_ORDER)]!
ldr r6, =(KERNEL_END - 1)
- add r0, r0, #4
- add r6, r4, r6, lsr #18
+ add r0, r0, #1 << PMD_ORDER
+ add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
1: cmp r0, r6
- add r3, r3, #1 << 20
- strls r3, [r0], #4
+ add r3, r3, #1 << SECTION_SHIFT
+ strls r3, [r0], #1 << PMD_ORDER
bls 1b
#ifdef CONFIG_XIP_KERNEL
@@ -203,11 +232,11 @@ __create_page_tables:
*/
add r3, r8, #TEXT_OFFSET
orr r3, r3, r7
- add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18
- str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
+ add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
+ str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]!
ldr r6, =(_end - 1)
add r0, r0, #4
- add r6, r4, r6, lsr #18
+ add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
1: cmp r0, r6
add r3, r3, #1 << 20
strls r3, [r0], #4
@@ -215,15 +244,15 @@ __create_page_tables:
#endif
/*
- * Then map boot params address in r2 or
- * the first 1MB of ram if boot params address is not specified.
+ * Then map boot params address in r2 or the first 1MB (2MB with LPAE)
+ * of ram if boot params address is not specified.
*/
- mov r0, r2, lsr #20
- movs r0, r0, lsl #20
+ mov r0, r2, lsr #SECTION_SHIFT
+ movs r0, r0, lsl #SECTION_SHIFT
moveq r0, r8
sub r3, r0, r8
add r3, r3, #PAGE_OFFSET
- add r3, r4, r3, lsr #18
+ add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
orr r6, r7, r0
str r6, [r3]
@@ -236,21 +265,27 @@ __create_page_tables:
*/
addruart r7, r3
- mov r3, r3, lsr #20
- mov r3, r3, lsl #2
+ mov r3, r3, lsr #SECTION_SHIFT
+ mov r3, r3, lsl #PMD_ORDER
add r0, r4, r3
rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long)
cmp r3, #0x0800 @ limit to 512MB
movhi r3, #0x0800
add r6, r0, r3
- mov r3, r7, lsr #20
+ mov r3, r7, lsr #SECTION_SHIFT
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
- orr r3, r7, r3, lsl #20
+ orr r3, r7, r3, lsl #SECTION_SHIFT
+#ifdef CONFIG_ARM_LPAE
+ mov r7, #1 << (54 - 32) @ XN
+#endif
1: str r3, [r0], #4
- add r3, r3, #1 << 20
- teq r0, r6
- bne 1b
+#ifdef CONFIG_ARM_LPAE
+ str r7, [r0], #4
+#endif
+ add r3, r3, #1 << SECTION_SHIFT
+ cmp r0, r6
+ blo 1b
#else /* CONFIG_DEBUG_ICEDCC */
/* we don't need any serial debugging mappings for ICEDCC */
@@ -262,7 +297,7 @@ __create_page_tables:
* If we're using the NetWinder or CATS, we also need to map
* in the 16550-type serial port for the debug messages
*/
- add r0, r4, #0xff000000 >> 18
+ add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
orr r3, r7, #0x7c000000
str r3, [r0]
#endif
@@ -272,13 +307,16 @@ __create_page_tables:
* Similar reasons here - for debug. This is
* only for Acorn RiscPC architectures.
*/
- add r0, r4, #0x02000000 >> 18
+ add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
orr r3, r7, #0x02000000
str r3, [r0]
- add r0, r4, #0xd8000000 >> 18
+ add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
str r3, [r0]
#endif
#endif
+#ifdef CONFIG_ARM_LPAE
+ sub r4, r4, #0x1000 @ point to the PGD table
+#endif
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
@@ -370,12 +408,17 @@ __enable_mmu:
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
+#ifdef CONFIG_ARM_LPAE
+ mov r5, #0
+ mcrr p15, 0, r4, r5, c2 @ load TTBR0
+#else
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
domain_val(DOMAIN_IO, DOMAIN_CLIENT))
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
+#endif
b __turn_mmu_on
ENDPROC(__enable_mmu)
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index bca7e61..48639e7 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -91,7 +91,11 @@ obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o
obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
obj-$(CONFIG_CPU_V6K) += proc-v6.o
+ifeq ($(CONFIG_ARM_LPAE),y)
+obj-$(CONFIG_CPU_V7) += proc-v7lpae.o
+else
obj-$(CONFIG_CPU_V7) += proc-v7.o
+endif
AFLAGS_proc-v6.o :=-Wa,-march=armv6
AFLAGS_proc-v7.o :=-Wa,-march=armv7-a
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index c990280..1ba2a5a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -150,6 +150,7 @@ static int __init early_nowrite(char *__unused)
}
early_param("nowb", early_nowrite);
+#ifndef CONFIG_ARM_LPAE
static int __init early_ecc(char *p)
{
if (memcmp(p, "on", 2) == 0)
@@ -159,6 +160,7 @@ static int __init early_ecc(char *p)
return 0;
}
early_param("ecc", early_ecc);
+#endif
static int __init noalign_setup(char *__unused)
{
@@ -228,10 +230,12 @@ static struct mem_type mem_types[] = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
.domain = DOMAIN_KERNEL,
},
+#ifndef CONFIG_ARM_LPAE
[MT_MINICLEAN] = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
.domain = DOMAIN_KERNEL,
},
+#endif
[MT_LOW_VECTORS] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_RDONLY,
@@ -421,6 +425,7 @@ static void __init build_mem_type_table(void)
* ARMv6 and above have extended page tables.
*/
if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
+#ifndef CONFIG_ARM_LPAE
/*
* Mark cache clean areas and XIP ROM read only
* from SVC mode and no access from userspace.
@@ -428,6 +433,7 @@ static void __init build_mem_type_table(void)
mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+#endif
if (is_smp()) {
/*
@@ -466,6 +472,18 @@ static void __init build_mem_type_table(void)
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
}
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Do not generate access flag faults for the kernel mappings.
+ */
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+ mem_types[i].prot_pte |= PTE_EXT_AF;
+ mem_types[i].prot_sect |= PMD_SECT_AF;
+ }
+ kern_pgprot |= PTE_EXT_AF;
+ vecs_pgprot |= PTE_EXT_AF;
+#endif
+
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
protection_map[i] = __pgprot(v | user_pgprot);
@@ -564,8 +582,10 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
if (((addr | end | phys) & ~SECTION_MASK) == 0) {
pmd_t *p = pmd;
+#ifndef CONFIG_ARM_LPAE
if (addr & SECTION_SIZE)
pmd++;
+#endif
do {
*pmd = __pmd(phys | type->prot_sect);
@@ -595,6 +615,7 @@ static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
} while (pud++, addr = next, addr != end);
}
+#ifndef CONFIG_ARM_LPAE
static void __init create_36bit_mapping(struct map_desc *md,
const struct mem_type *type)
{
@@ -654,6 +675,7 @@ static void __init create_36bit_mapping(struct map_desc *md,
pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
} while (addr != end);
}
+#endif /* !CONFIG_ARM_LPAE */
/*
* Create the page directory entries and any necessary
@@ -685,6 +707,7 @@ static void __init create_mapping(struct map_desc *md)
type = &mem_types[md->type];
+#ifndef CONFIG_ARM_LPAE
/*
* Catch 36-bit addresses
*/
@@ -692,6 +715,7 @@ static void __init create_mapping(struct map_desc *md)
create_36bit_mapping(md, type);
return;
}
+#endif
addr = md->virtual & PAGE_MASK;
phys = __pfn_to_phys(md->pfn);
@@ -889,6 +913,14 @@ static inline void prepare_page_table(void)
pmd_clear(pmd_off_k(addr));
}
+#ifdef CONFIG_ARM_LPAE
+/* the first page is reserved for pgd */
+#define SWAPPER_PG_DIR_SIZE (PAGE_SIZE + \
+ PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
+#else
+#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
+#endif
+
/*
* Reserve the special regions of memory
*/
@@ -898,7 +930,7 @@ void __init arm_mm_memblock_reserve(void)
* Reserve the page tables. These are already in use,
* and can only be in node 0.
*/
- memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
+ memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE);
#ifdef CONFIG_SA1111
/*
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 307a4de..2d8ff3a 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -91,8 +91,9 @@
#if L_PTE_SHARED != PTE_EXT_SHARED
#error PTE shared bit mismatch
#endif
-#if (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
- L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
+#if !defined (CONFIG_ARM_LPAE) && \
+ (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
+ L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
#error Invalid Linux PTE bit settings
#endif
#endif /* CONFIG_MMU */
diff --git a/arch/arm/mm/proc-v7lpae.S b/arch/arm/mm/proc-v7lpae.S
new file mode 100644
index 0000000..0bee213
--- /dev/null
+++ b/arch/arm/mm/proc-v7lpae.S
@@ -0,0 +1,422 @@
+/*
+ * arch/arm/mm/proc-v7lpae.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas at arm.com>
+ * based on arch/arm/mm/proc-v7.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+
+#include "proc-macros.S"
+
+#define TTB_IRGN_NC (0 << 8)
+#define TTB_IRGN_WBWA (1 << 8)
+#define TTB_IRGN_WT (2 << 8)
+#define TTB_IRGN_WB (3 << 8)
+#define TTB_RGN_NC (0 << 10)
+#define TTB_RGN_OC_WBWA (1 << 10)
+#define TTB_RGN_OC_WT (2 << 10)
+#define TTB_RGN_OC_WB (3 << 10)
+#define TTB_S (3 << 12)
+#define TTB_EAE (1 << 31)
+
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS_UP (TTB_IRGN_WB|TTB_RGN_OC_WB)
+#define PMD_FLAGS_UP (PMD_SECT_WB)
+
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS_SMP (TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA)
+#define PMD_FLAGS_SMP (PMD_SECT_WBWA|PMD_SECT_S)
+
+ENTRY(cpu_v7_proc_init)
+ mov pc, lr
+ENDPROC(cpu_v7_proc_init)
+
+ENTRY(cpu_v7_proc_fin)
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x0006 @ .............ca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ mov pc, lr
+ENDPROC(cpu_v7_proc_fin)
+
+/*
+ * cpu_v7_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * - loc - location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_v7_reset)
+ mov pc, r0
+ENDPROC(cpu_v7_reset)
+
+/*
+ * cpu_v7_do_idle()
+ *
+ * Idle the processor (eg, wait for interrupt).
+ *
+ * IRQs are already disabled.
+ */
+ENTRY(cpu_v7_do_idle)
+ dsb @ WFI may enter a low-power mode
+ wfi
+ mov pc, lr
+ENDPROC(cpu_v7_do_idle)
+
+ENTRY(cpu_v7_dcache_clean_area)
+#ifndef TLB_CAN_READ_FROM_L1_CACHE
+ dcache_line_size r2, r3
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, r2
+ subs r1, r1, r2
+ bhi 1b
+ dsb
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_dcache_clean_area)
+
+/*
+ * cpu_v7_switch_mm(pgd_phys, tsk)
+ *
+ * Set the translation table base pointer to be pgd_phys
+ *
+ * - pgd_phys - physical address of new TTB
+ *
+ * It is assumed that:
+ * - we are not using split page tables
+ */
+ENTRY(cpu_v7_switch_mm)
+#ifdef CONFIG_MMU
+ ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
+ mov r2, #0
+ and r3, r1, #0xff
+ mov r3, r3, lsl #(48 - 32) @ ASID
+ mcrr p15, 0, r0, r3, c2 @ set TTB 0
+ isb
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_switch_mm)
+
+/*
+ * cpu_v7_set_pte_ext(ptep, pte)
+ *
+ * Set a level 2 translation table entry.
+ *
+ * - ptep - pointer to level 2 translation table entry
+ * (hardware version is stored at +2048 bytes)
+ * - pte - PTE value to store
+ * - ext - value for extended PTE bits
+ */
+ENTRY(cpu_v7_set_pte_ext)
+#ifdef CONFIG_MMU
+ tst r2, #L_PTE_PRESENT
+ beq 1f
+ tst r3, #1 << (55 - 32) @ L_PTE_DIRTY
+ orreq r2, #L_PTE_RDONLY
+1: strd r2, r3, [r0]
+ mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
+
+cpu_v7_name:
+ .ascii "ARMv7 Processor"
+ .align
+
+ /*
+ * Memory region attributes for LPAE (defined in pgtable-3level.h):
+ *
+ * n = AttrIndx[2:0]
+ *
+ * n MAIR
+ * UNCACHED 000 00000000
+ * BUFFERABLE 001 01000100
+ * DEV_WC 001 01000100
+ * WRITETHROUGH 010 10101010
+ * WRITEBACK 011 11101110
+ * DEV_CACHED 011 11101110
+ * DEV_SHARED 100 00000100
+ * DEV_NONSHARED 100 00000100
+ * unused 101
+ * unused 110
+ * WRITEALLOC 111 11111111
+ */
+.equ MAIR0, 0xeeaa4400 @ MAIR0
+.equ MAIR1, 0xff000004 @ MAIR1
+
+/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
+.globl cpu_v7_suspend_size
+.equ cpu_v7_suspend_size, 4 * 10
+#ifdef CONFIG_PM_SLEEP
+ENTRY(cpu_v7_do_suspend)
+ stmfd sp!, {r4 - r11, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c13, c0, 1 @ Context ID
+ mrc p15, 0, r6, c3, c0, 0 @ Domain ID
+ mrrc p15, 0, r7, r8, c2 @ TTB 0
+ mrrc p15, 1, r2, r3, c2 @ TTB 1
+ mrc p15, 0, r9, c1, c0, 0 @ Control register
+ mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r2 - r11}
+ ldmfd sp!, {r4 - r11, pc}
+ENDPROC(cpu_v7_do_suspend)
+
+ENTRY(cpu_v7_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ ldmia r0, {r2 - r11}
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c13, c0, 1 @ Context ID
+ mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+ mcrr p15, 0, r7, r8, c2 @ TTB 0
+ mcrr p15, 1, r2, r3, c2 @ TTB 1
+ mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ ldr r4, =MAIR0
+ ldr r5, =MAIR1
+ mcr p15, 0, r4, c10, c2, 0 @ write MAIR0
+ mcr p15, 0, r5, c10, c2, 1 @ write MAIR1
+ isb
+ mov r0, r9 @ control register
+ mov r2, r7, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, cpu_resume_l1_flags
+ b cpu_resume_mmu
+ENDPROC(cpu_v7_do_resume)
+cpu_resume_l1_flags:
+ ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
+ ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
+#else
+#define cpu_v7_do_suspend 0
+#define cpu_v7_do_resume 0
+#endif
+
+ __CPUINIT
+
+/*
+ * __v7_setup
+ *
+ * Initialise TLB, Caches, and MMU state ready to switch the MMU
+ * on. Return in r0 the new CP15 C1 control register setting.
+ *
+ * This should be able to cover all ARMv7 cores with LPAE.
+ *
+ * It is assumed that:
+ * - cache type register is implemented
+ */
+__v7_ca15mp_setup:
+ mov r10, #0
+1:
+#ifdef CONFIG_SMP
+ ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
+ ALT_UP(mov r0, #(1 << 6)) @ fake it for UP
+ tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
+ orreq r0, r0, #(1 << 6) @ Enable SMP/nAMP mode
+ orreq r0, r0, r10 @ Enable CPU-specific SMP bits
+ mcreq p15, 0, r0, c1, c0, 1
+#endif
+__v7_setup:
+ adr r12, __v7_setup_stack @ the local stack
+ stmia r12, {r0-r5, r7, r9, r11, lr}
+ bl v7_flush_dcache_all
+ ldmia r12, {r0-r5, r7, r9, r11, lr}
+
+ mov r10, #0
+ mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
+ dsb
+#ifdef CONFIG_MMU
+ mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
+ mov r5, #TTB_EAE
+ ALT_SMP(orr r5, r5, #TTB_FLAGS_SMP)
+ ALT_SMP(orr r5, r5, #TTB_FLAGS_SMP << 16)
+ ALT_UP(orr r5, r5, #TTB_FLAGS_UP)
+ ALT_UP(orr r5, r5, #TTB_FLAGS_UP << 16)
+ mrc p15, 0, r10, c2, c0, 2
+ orr r10, r10, r5
+#if PHYS_OFFSET <= PAGE_OFFSET
+ /*
+ * TTBR0/TTBR1 split (PAGE_OFFSET):
+ * 0x40000000: T0SZ = 2, T1SZ = 0 (not used)
+ * 0x80000000: T0SZ = 0, T1SZ = 1
+ * 0xc0000000: T0SZ = 0, T1SZ = 2
+ *
+ * Only use this feature if PAGE_OFFSET <= PAGE_OFFSET, otherwise
+ * booting secondary CPUs would end up using TTBR1 for the identity
+ * mapping set up in TTBR0.
+ */
+ orr r10, r10, #(((PAGE_OFFSET >> 30) - 1) << 16) @ TTBCR.T1SZ
+#endif
+ mcr p15, 0, r10, c2, c0, 2 @ TTB control register
+ mov r5, #0
+#if defined CONFIG_VMSPLIT_2G
+ /* PAGE_OFFSET == 0x80000000, T1SZ == 1 */
+ add r6, r8, #1 << 4 @ skip two L1 entries
+#elif defined CONFIG_VMSPLIT_3G
+ /* PAGE_OFFSET == 0xc0000000, T1SZ == 2 */
+ add r6, r8, #4096 * (1 + 3) @ only L2 used, skip pgd+3*pmd
+#else
+ mov r6, r8
+#endif
+ mcrr p15, 1, r6, r5, c2 @ load TTBR1
+ ldr r5, =MAIR0
+ ldr r6, =MAIR1
+ mcr p15, 0, r5, c10, c2, 0 @ write MAIR0
+ mcr p15, 0, r6, c10, c2, 1 @ write MAIR1
+#endif
+ adr r5, v7_crval
+ ldmia r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ orr r6, r6, #1 << 25 @ big-endian page tables
+#endif
+#ifdef CONFIG_SWP_EMULATE
+ orr r5, r5, #(1 << 10) @ set SW bit in "clear"
+ bic r6, r6, #(1 << 10) @ clear it in "mmuset"
+#endif
+ mrc p15, 0, r0, c1, c0, 0 @ read control register
+ bic r0, r0, r5 @ clear bits them
+ orr r0, r0, r6 @ set them
+ THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
+ mov pc, lr @ return to head.S:__ret
+ENDPROC(__v7_setup)
+
+ /* AT
+ * TFR EV X F IHD LR S
+ * .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM
+ * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+ * 11 0 110 1 0011 1100 .111 1101 < we want
+ */
+ .type v7_crval, #object
+v7_crval:
+ crval clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c
+
+__v7_setup_stack:
+ .space 4 * 11 @ 11 registers
+
+ __INITDATA
+
+ .type v7_processor_functions, #object
+ENTRY(v7_processor_functions)
+ .word v7_early_abort
+ .word v7_pabort
+ .word cpu_v7_proc_init
+ .word cpu_v7_proc_fin
+ .word cpu_v7_reset
+ .word cpu_v7_do_idle
+ .word cpu_v7_dcache_clean_area
+ .word cpu_v7_switch_mm
+ .word cpu_v7_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
+ .size v7_processor_functions, . - v7_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv7"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v7"
+ .size cpu_elf_name, . - cpu_elf_name
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+ .type __v7_ca15mp_proc_info, #object
+__v7_ca15mp_proc_info:
+ .long 0x410fc0f0 @ Required ID value
+ .long 0xff0ffff0 @ Mask for ID
+ ALT_SMP(.long \
+ PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_SECT_AF | \
+ PMD_FLAGS_SMP)
+ ALT_UP(.long \
+ PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_SECT_AF | \
+ PMD_FLAGS_UP)
+ /* PMD_SECT_XN is set explicitly in head.S for LPAE */
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_XN | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_SECT_AF
+ b __v7_ca15mp_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
+ .long cpu_v7_name
+ .long v7_processor_functions
+ .long v7wbi_tlb_fns
+ .long v6_user_fns
+ .long v7_cache_fns
+ .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
+
+ /*
+ * Match any ARMv7 processor core.
+ */
+ .type __v7_proc_info, #object
+__v7_proc_info:
+ .long 0x000f0000 @ Required ID value
+ .long 0x000f0000 @ Mask for ID
+ ALT_SMP(.long \
+ PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_SECT_AF | \
+ PMD_FLAGS_SMP)
+ ALT_UP(.long \
+ PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_SECT_AF | \
+ PMD_FLAGS_UP)
+ /* PMD_SECT_XN is set explicitly in head.S for LPAE */
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_XN | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_SECT_AF
+ W(b) __v7_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
+ .long cpu_v7_name
+ .long v7_processor_functions
+ .long v7wbi_tlb_fns
+ .long v6_user_fns
+ .long v7_cache_fns
+ .size __v7_proc_info, . - __v7_proc_info
More information about the linux-arm-kernel
mailing list