[PATCH v3 1/3] ARM: i.MX51: Remove _MX51_PAD_xxx references

Sascha Hauer s.hauer at pengutronix.de
Tue Aug 16 03:26:03 EDT 2011


On Sat, Aug 13, 2011 at 12:51:41PM -0700, Troy Kisky wrote:
> Use new macro NEW_PAD_CTRL to remove _MX51_PAD_xxx references.
> A later patch will remove the _MX51_PAD_xxx symbols.
> 
> Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
> ---
>  arch/arm/mach-mx5/board-cpuimx51sd.c         |    2 +-
>  arch/arm/mach-mx5/board-mx51_babbage.c       |    4 ++--
>  arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c |    4 ++--
>  arch/arm/plat-mxc/include/mach/iomux-v3.h    |    1 +
>  4 files changed, 6 insertions(+), 5 deletions(-)
> 
> 
> Changes since v2: add () around cfg in NEW_PAD_CTRL macro
> as noticed by Sascha.
> 
> 2/3 and 3/3 are the same as v2 and are not reposted.

Applied this one. Can you send me the whole 2/3 and 3/3 patches?
I only have the sed scripts which I don't want to execute manually.

Sascha

> 
> 
> 
> 
> 
> diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
> index ff096d5..040c5c3 100644
> --- a/arch/arm/mach-mx5/board-cpuimx51sd.c
> +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
> @@ -108,7 +108,7 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
>  
>  	/* Touchscreen */
>  	/* IRQ */
> -	_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
> +	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
>  			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
>  			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
>  };
> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
> index e400b09..5a578f9 100644
> --- a/arch/arm/mach-mx5/board-mx51_babbage.c
> +++ b/arch/arm/mach-mx5/board-mx51_babbage.c
> @@ -357,8 +357,8 @@ static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
>  static void __init mx51_babbage_init(void)
>  {
>  	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
> -	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
> -		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
> +	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
> +		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
>  
>  	imx51_soc_init();
>  
> diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
> index 2619239..f046d4b 100644
> --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
> +++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
> @@ -47,7 +47,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
>  	/* LED */
>  	MX51_PAD_NANDF_D10__GPIO3_30,
>  	/* SWITCH */
> -	_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
> +	NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
>  			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
>  			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
>  	/* UART2 */
> @@ -66,7 +66,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
>  	MX51_PAD_SD1_DATA2__SD1_DATA2,
>  	MX51_PAD_SD1_DATA3__SD1_DATA3,
>  	/* SD1 CD */
> -	_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
> +	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
>  			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
>  			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
>  };
> diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
> index ebbce33..35e0df2 100644
> --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
> +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
> @@ -80,6 +80,7 @@ typedef u64 iomux_v3_cfg_t;
>  		((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
>  		((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
>  
> +#define NEW_PAD_CTRL(cfg, pad)	(((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
>  /*
>   * Use to set PAD control
>   */
> -- 
> 1.7.0.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the linux-arm-kernel mailing list