[PATCH v2 0/8] Clean up MXC and MXS mach/gpio.h

Shawn Guo shawn.guo at freescale.com
Wed Aug 17 03:10:11 EDT 2011


On Wed, Aug 17, 2011 at 08:47:37AM +0200, Sascha Hauer wrote:
> On Wed, Aug 17, 2011 at 02:25:40PM +0800, Shawn Guo wrote:
> > On Tue, Aug 16, 2011 at 09:19:50AM +0200, Sascha Hauer wrote:
> > > Shawn,
> > > 
> > > On Sun, Aug 14, 2011 at 12:13:59AM +0800, Shawn Guo wrote:
> > > > As one step to single image for multiple platforms, mach/gpio.h needs
> > > > to be removed from asm/gpio.h.  The patch set cleans up MXC and MXS
> > > > mach/gpio.h to an empty header.
> > > > 
> > > > It's based on v3.1-rc1 plus rmk's patch series below.
> > > > 
> > > >   [PATCH 00/13] Clean up mach/gpio.h headers
> > > > 
> > > > The Ben's fix is on the way to -rc2 through arm-soc tree.
> > > > 
> > > > Grant, Sascha,
> > > > 
> > > > Can you please review the series and give comments or your ack tag?
> > > 
> > > I'm fine with this series. I removed the dependency on rmks patches
> > > (can be easily merged later) and checked it into my cleanup branch.
> > > Please check if you are fine with the result.
> > > 
> > It looks all good in terms of code.  But the commit messages of the
> > following patches do not fit the context any more.
> 
> Yes, you are right. Changed it to the following
> 
> > 
> >   arm/mxc: remove gpio_to_irq() from mach/gpio.h
> 
>     arm/mxc: use gpiolib helper for gpio_to_irq
>     
>     As all the users of gpio_to_irq() in static initializers have been
>     migrated to IMX_GPIO_TO_IRQ, we can start using the standard gpiolib
>     helper for gpio_to_irq().
> 
> >   arm/mxc: move IMX_GPIO_NR into mach/hardware.h
> 
>     arm/mxc: move IMX_GPIO_NR into mach/hardware.h
>     
>     The patch moves IMX_GPIO_NR into mach/hardware.h, so that we only
>     use standard gpiolib helpers in mach/gpio.h.
> 
> >   arm/mxs: move MXS_GPIO_NR into mach/mxs.h
> 
>     arm/mxs: move MXS_GPIO_NR into mach/mxs.h
>     
>     The patch moves MXS_GPIO_NR into mach/mxs.h, so that we only use
>     standard gpiolib helpers in mach/gpio.h.
> 
Looks all good now.

-- 
Regards,
Shawn




More information about the linux-arm-kernel mailing list