[PATCH 4/7] OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage
Kevin Hilman
khilman at ti.com
Mon Aug 29 14:10:46 EDT 2011
Use preferred voltdm_ naming for getting current nominal voltage.
No functional changes.
Signed-off-by: Kevin Hilman <khilman at ti.com>
---
arch/arm/mach-omap2/smartreflex-class3.c | 2 +-
arch/arm/mach-omap2/voltage.c | 14 ++++++++------
arch/arm/mach-omap2/voltage.h | 2 +-
3 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index 4eac1bc..53d9d0a 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -15,7 +15,7 @@
static int sr_class3_enable(struct voltagedomain *voltdm)
{
- unsigned long volt = omap_voltage_get_nom_volt(voltdm);
+ unsigned long volt = voltdm_get_voltage(voltdm);
if (!volt) {
pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 2ba276f..441c2d9 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -45,13 +45,13 @@ static LIST_HEAD(voltdm_list);
/* Public functions */
/**
- * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage
- * @voltdm: pointer to the VDD for which current voltage info is needed
+ * voltdm_get_voltage() - Gets the current non-auto-compensated voltage
+ * @voltdm: pointer to the voltdm for which current voltage info is needed
*
- * API to get the current non-auto-compensated voltage for a VDD.
- * Returns 0 in case of error else returns the current voltage for the VDD.
+ * API to get the current non-auto-compensated voltage for a voltage domain.
+ * Returns 0 in case of error else returns the current voltage.
*/
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm)
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
{
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
@@ -72,6 +72,8 @@ unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm)
int voltdm_scale(struct voltagedomain *voltdm,
unsigned long target_volt)
{
+ int ret;
+
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
@@ -104,7 +106,7 @@ void voltdm_reset(struct voltagedomain *voltdm)
return;
}
- target_volt = omap_voltage_get_nom_volt(voltdm);
+ target_volt = voltdm_get_voltage(voltdm);
if (!target_volt) {
pr_err("%s: unable to find current voltage for vdd_%s\n",
__func__, voltdm->name);
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 68b1ed5..b4c6259 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -143,7 +143,6 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm,
struct omap_volt_data **volt_data);
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
struct omap_voltdm_pmic *pmic);
@@ -178,4 +177,5 @@ int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
struct powerdomain *pwrdm));
int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
void voltdm_reset(struct voltagedomain *voltdm);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
#endif
--
1.7.6
More information about the linux-arm-kernel
mailing list