Fwd: [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller

Cousson, Benoit b-cousson at ti.com
Tue Aug 23 15:15:11 EDT 2011


> The device tree support has been added to i2c1 controller and
> corresponding i2c initilization in generic board file is cleaned
> up so that platfom device is registered through dt and omap device
> and not through board i2c initilization.

A couple of typos in the changelog.

That patch should be in two parts: the driver DT update and the beagle 
board update.

> These changes will not affect non dt builds and existing functionality
> is retained.
>
> Tested with dt and non dt builds and boot tested on beagle board.

Is it crashing at boot time like for panda? In that case a big 
disclaimer should be in the broken patch changelog as well.

> Signed-off-by: G, Manjunath Kondaiah<manjugk at ti.com>
> ---
>    arch/arm/mach-omap2/board-omap3-dt.c |   14 +++++++-------
>    drivers/i2c/busses/i2c-omap.c        |   23 ++++++++++++++++++++---
>    2 files changed, 27 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3-dt.c
> b/arch/arm/mach-omap2/board-omap3-dt.c
> index 72c59a4..cd11224 100644
> --- a/arch/arm/mach-omap2/board-omap3-dt.c
> +++ b/arch/arm/mach-omap2/board-omap3-dt.c
> @@ -35,11 +35,11 @@ static struct twl4030_platform_data beagle_twldata = {
>    	/* platform_data for children goes here */
>    };
>
> -static int __init omap3_beagle_i2c_init(void)
> -{
> -	omap3_pmic_init("twl4030",&beagle_twldata);
> -	return 0;
> -}
> +struct of_dev_auxdata omap3_auxdata_lookup[] __initdata = {
> +	OF_DEV_AUXDATA_ID_PDSIZE("ti,omap-i2c", 0x48070000, "i2c1", 1,\
> +				&beagle_twldata, sizeof(beagle_twldata)),
> +	{}
> +};
>
>    static void __init omap3_init_early(void)
>    {
> @@ -61,11 +61,11 @@ static struct of_device_id omap_dt_match_table[]
> __initdata = {
>
>    static void __init omap3_init(void)
>    {
> -	omap3_beagle_i2c_init();
>    	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
>    	omap_serial_init();
>
> -	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
> +	of_platform_populate(NULL, omap_dt_match_table, omap3_auxdata_lookup,
> +									 NULL);
>    }
>
>    static const char *omap3_dt_match[] __initdata = {
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index 2a072ff..9e98014 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -38,6 +38,7 @@
>    #include<linux/clk.h>
>    #include<linux/io.h>
>    #include<linux/of_i2c.h>
> +#include<linux/of_device.h>
>    #include<linux/slab.h>
>    #include<linux/i2c-omap.h>
>    #include<linux/pm_runtime.h>
> @@ -972,6 +973,16 @@ static const struct i2c_algorithm omap_i2c_algo = {
>    	.functionality	= omap_i2c_func,
>    };
>
> +#if defined(CONFIG_OF)
> +static const struct of_device_id omap_i2c_of_match[] = {
> +	{.compatible = "ti,omap-i2c", },
> +	{},
> +}
> +MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
> +#else
> +#define omap_i2c_of_match NULL
> +#endif
> +
>    static int __devinit
>    omap_i2c_probe(struct platform_device *pdev)
>    {
> @@ -1008,12 +1019,17 @@ omap_i2c_probe(struct platform_device *pdev)
>    		goto err_release_region;
>    	}
>
> +	speed = 100;	/* Default speed */
>    	if (pdata != NULL) {
>    		speed = pdata->clkrate;
>    		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
> -	} else {
> -		speed = 100;	/* Default speed */
> -		dev->set_mpu_wkup_lat = NULL;
> +#if defined(CONFIG_OF)
> +	} else if (pdev->dev.of_node) {
> +		u32 prop;
> +		if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
> +									&prop))
> +			speed = prop/100;

Did you check the frequency? It should be prop/1000 to get Hz -> kHz 
conversion. Otherwise the driver will set the i2c speed at 4 MHz.

Benoit

> +#endif
>    	}
>
>    	dev->speed = speed;
> @@ -1178,6 +1194,7 @@ static struct platform_driver omap_i2c_driver = {
>    		.name	= "omap_i2c",
>    		.owner	= THIS_MODULE,
>    		.pm	= OMAP_I2C_PM_OPS,
> +		.of_match_table = omap_i2c_of_match,
>    	},
>    };
>




More information about the linux-arm-kernel mailing list