[PATCH] pcmcia/pxa2xx_sharpsl: retain ops structure on collie

[Dmitry Eremin-Solenikov]

On Sun, Aug 7, 2011 at 3:05 PM, Dmitry Eremin-Solenikov
<dbaryshkov at gmail.com> wrote:
> The pxa2xx_sharpsl driver part is also used on collie, which (as
> a StrongARM board) has different expectations for PCMCIA drivers.
> So, on collie place sharpsl_pcmcia_ops in .data section rather than
> in __initdata.
>
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
> Cc: stable at kernel.org

Any comments on this patch?

> diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
> index 69ae2fd..f2405dc 100644
> --- a/drivers/pcmcia/pxa2xx_sharpsl.c
> +++ b/drivers/pcmcia/pxa2xx_sharpsl.c
> @@ -219,7 +219,11 @@ static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
>        sharpsl_pcmcia_init_reset(skt);
>  }
>
> +#ifdef CONFIG_SA1100_COLLIE
> +static struct pcmcia_low_level sharpsl_pcmcia_ops = {
> +#else
>  static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = {
> +#endif
>        .owner                  = THIS_MODULE,
>        .hw_init                = sharpsl_pcmcia_hw_init,
>        .hw_shutdown            = sharpsl_pcmcia_hw_shutdown,
> --
> 1.7.2.5
>
>



-- 
With best wishes
Dmitry