[PATCH 3/8] ARM: mx5: dynamically allocate mxc-ehci devices
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Mon Aug 1 05:38:24 EDT 2011
Additionally make the usb related defines consistent with the other imx
SoCs.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/mach-mx5/Kconfig | 6 ++-
arch/arm/mach-mx5/board-cpuimx51.c | 12 +++---
arch/arm/mach-mx5/board-cpuimx51sd.c | 12 +++---
arch/arm/mach-mx5/board-mx51_babbage.c | 12 +++---
arch/arm/mach-mx5/board-mx51_efikasb.c | 5 +-
arch/arm/mach-mx5/devices-imx51.h | 7 +++
arch/arm/mach-mx5/devices.c | 61 +------------------------
arch/arm/mach-mx5/devices.h | 3 -
arch/arm/mach-mx5/ehci.c | 2 +-
arch/arm/mach-mx5/mx51_efika.c | 14 +++---
arch/arm/plat-mxc/devices/platform-mxc-ehci.c | 9 ++++
arch/arm/plat-mxc/include/mach/mx51.h | 11 +++--
12 files changed, 57 insertions(+), 97 deletions(-)
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index b4e7c58..2905110 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -68,6 +68,7 @@ config MACH_MX51_BABBAGE
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
@@ -93,6 +94,7 @@ config MACH_EUKREA_CPUIMX51
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
@@ -120,9 +122,10 @@ config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_SPI_IMX
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
@@ -147,6 +150,7 @@ config MX51_EFIKA_COMMON
bool
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 7c893fa..aa1ff79 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -167,7 +167,7 @@ static int initialize_otg_port(struct platform_device *pdev)
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -190,7 +190,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -206,7 +206,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
@@ -216,7 +216,7 @@ static struct fsl_usb2_platform_data usb_pdata = {
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -270,12 +270,12 @@ static void __init eukrea_cpuimx51_init(void)
ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
if (otg_mode_host)
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
}
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
eukrea_mbimx51_baseboard_init();
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index ff096d5..bca3719 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -149,7 +149,7 @@ static int initialize_otg_port(struct platform_device *pdev)
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -172,7 +172,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -189,7 +189,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
@@ -199,7 +199,7 @@ static struct fsl_usb2_platform_data usb_pdata = {
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -303,7 +303,7 @@ static void __init eukrea_cpuimx51sd_init(void)
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
if (otg_mode_host)
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
@@ -313,7 +313,7 @@ static void __init eukrea_cpuimx51sd_init(void)
gpio_direction_output(USBH1_RST, 0);
msleep(20);
gpio_set_value(USBH1_RST, 1);
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
eukrea_mbimxsd51_baseboard_init();
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index e400b09..1d15297 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -249,7 +249,7 @@ static int initialize_otg_port(struct platform_device *pdev)
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -272,7 +272,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -288,7 +288,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
@@ -298,7 +298,7 @@ static struct fsl_usb2_platform_data usb_pdata = {
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -384,14 +384,14 @@ static void __init mx51_babbage_init(void)
mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
if (otg_mode_host)
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
}
gpio_usbh1_active();
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
/* setback USBH1_STP to be function */
mxc_iomux_v3_setup_pad(usbh1stp);
babbage_usbhub_reset();
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 2e4d9d3..10f0562 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -42,7 +42,6 @@
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "efika.h"
#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20)
@@ -119,7 +118,7 @@ static int initialize_usbh2_port(struct platform_device *pdev)
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data usbh2_config = {
+static struct mxc_usbh_platform_data usbh2_config __initdata = {
.init = initialize_usbh2_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -129,7 +128,7 @@ static void __init mx51_efikasb_usb(void)
usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
if (usbh2_config.otg)
- mxc_register_device(&mxc_usbh2_device, &usbh2_config);
+ imx51_add_mxc_ehci_hs(2, &usbh2_config);
}
static const struct gpio_led mx51_efikasb_leds[] __initconst = {
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index e11bc0e..f42acf5 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -25,6 +25,13 @@ extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
#define imx51_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
+#define imx51_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
+#define imx51_add_mxc_ehci_hs(id, pdata) \
+ imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
+
extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
#define imx51_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 5fd8f0c..88edf26 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -40,8 +40,8 @@ static u64 usb_dma_mask = DMA_BIT_MASK(32);
static struct resource usbotg_resources[] = {
{
- .start = MX51_OTG_BASE_ADDR,
- .end = MX51_OTG_BASE_ADDR + 0x1ff,
+ .start = MX51_USB_OTG_BASE_ADDR,
+ .end = MX51_USB_OTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
},
{
@@ -61,60 +61,3 @@ struct platform_device mxc_usbdr_udc_device = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
-
-struct platform_device mxc_usbdr_host_device = {
- .name = "mxc-ehci",
- .id = 0,
- .num_resources = ARRAY_SIZE(usbotg_resources),
- .resource = usbotg_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource usbh1_resources[] = {
- {
- .start = MX51_OTG_BASE_ADDR + 0x200,
- .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_INT_USB_H1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh1_device = {
- .name = "mxc-ehci",
- .id = 1,
- .num_resources = ARRAY_SIZE(usbh1_resources),
- .resource = usbh1_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource usbh2_resources[] = {
- {
- .start = MX51_OTG_BASE_ADDR + 0x400,
- .end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_INT_USB_H2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh2_device = {
- .name = "mxc-ehci",
- .id = 2,
- .num_resources = ARRAY_SIZE(usbh2_resources),
- .resource = usbh2_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index 55a5129..0f30a6e 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -1,5 +1,2 @@
-extern struct platform_device mxc_usbdr_host_device;
-extern struct platform_device mxc_usbh1_device;
-extern struct platform_device mxc_usbh2_device;
extern struct platform_device mxc_usbdr_udc_device;
extern struct platform_device mxc_hsi2c_device;
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-mx5/ehci.c
index 7ce12c8..c17fa13 100644
--- a/arch/arm/mach-mx5/ehci.c
+++ b/arch/arm/mach-mx5/ehci.c
@@ -52,7 +52,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
void __iomem *usbother_base;
int ret = 0;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base) {
printk(KERN_ERR "%s(): ioremap failed\n", __func__);
return -ENOMEM;
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 4435e03..e99dead 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -41,7 +41,6 @@
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "efika.h"
#include "cpu_op-mx51.h"
@@ -133,7 +132,7 @@ static int initialize_otg_port(struct platform_device *pdev)
u32 v;
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
@@ -150,7 +149,7 @@ static int initialize_otg_port(struct platform_device *pdev)
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
@@ -170,7 +169,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
gpio_set_value(EFIKAMX_USBH1_STP, 1);
msleep(1);
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
/* The clock for the USBH1 ULPI port will come externally */
@@ -189,7 +188,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data usbh1_config = {
+static struct mxc_usbh_platform_data usbh1_config __initdata = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -217,9 +216,9 @@ static void __init mx51_efika_usb(void)
usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
if (usbh1_config.otg)
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
}
static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
@@ -631,4 +630,3 @@ void __init efika_board_common_init(void)
get_cpu_op = mx51_get_cpu_op;
#endif
}
-
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
index e1763e0..35851d8 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
@@ -49,6 +49,15 @@ const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
imx_mxc_ehci_data_entry_single(MX35, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX35 */
+#ifdef CONFIG_SOC_IMX51
+const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
+ imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
+const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
+ imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
+ imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata)
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index d240b6f..9666e31 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -55,7 +55,10 @@
#define MX51_AIPS1_BASE_ADDR 0x73f00000
#define MX51_AIPS1_SIZE SZ_1M
-#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_USB_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_USB_OTG_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0000)
+#define MX51_USB_HS1_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0200)
+#define MX51_USB_HS2_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0400)
#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000)
#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000)
#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000)
@@ -255,10 +258,10 @@
#define MX51_INT_IPU_SYN 11
#define MX51_INT_GPU 12
#define MX51_INT_RESV13 13
-#define MX51_INT_USB_H1 14
+#define MX51_INT_USB_HS1 14
#define MX51_INT_EMI 15
-#define MX51_INT_USB_H2 16
-#define MX51_INT_USB_H3 17
+#define MX51_INT_USB_HS2 16
+#define MX51_INT_USB_HS3 17
#define MX51_INT_USB_OTG 18
#define MX51_INT_SAHARA_H0 19
#define MX51_INT_SAHARA_H1 20
--
1.7.5.4
More information about the linux-arm-kernel
mailing list