May 2010 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat May 1 00:54:36 EDT 2010
Ending: Mon May 31 23:58:20 EDT 2010
Messages: 2830

• [PATCH] pxa/vpac270: Add OneNAND support   Marek Vasut
  • [PATCH] pxa/vpac270: Add OneNAND support   Eric Miao
• [PATCH 06/11] omap4: Fix omap_l2_cache_init not to run for other omaps   Shilimkar, Santosh
  • [PATCH 06/11] omap4: Fix omap_l2_cache_init not to run for other omaps   Tony Lindgren
• [RFC] Prohibit ioremap() on kernel managed RAM   Shilimkar, Santosh
  • [RFC] Prohibit ioremap() on kernel managed RAM   Russell King - ARM Linux
• RMK back online - please resend anything requiring my attention   Russell King - ARM Linux
• [PATCH] ARM: Add support for 10 hardirq bits   Russell King - ARM Linux
  • [PATCH] ARM: Add support for 10 hardirq bits   Magnus Damm
    • [PATCH] ARM: Add support for 10 hardirq bits   Eric Miao
      • [PATCH] ARM: Add support for 10 hardirq bits   Russell King - ARM Linux
      • [PATCH] ARM: Add support for 10 hardirq bits   Magnus Damm
      • [PATCH] ARM: Add support for 10 hardirq bits   Eric Miao
      • [PATCH] ARM: Add support for 10 hardirq bits   Magnus Damm
• [PATCH V2] ST SPEAr: Adding support for shared irq layer   Russell King - ARM Linux
  • [PATCH V2] ST SPEAr: Adding support for shared irq layer   Viresh KUMAR
    • [PATCH V2] ST SPEAr: Adding support for shared irq layer   Russell King - ARM Linux
• [PATCH V2] [ARM] Add ARCH_PROVIDES_UDELAY config option   Russell King - ARM Linux
  • [PATCH V2] [ARM] Add ARCH_PROVIDES_UDELAY config option   Saravana Kannan
    • [PATCH V2] [ARM] Add ARCH_PROVIDES_UDELAY config option   Russell King - ARM Linux
      • [PATCH V2] [ARM] Add ARCH_PROVIDES_UDELAY config option   Saravana Kannan
      • [PATCH V2] [ARM] Add ARCH_PROVIDES_UDELAY config option   Saravana Kannan
• [PATCH] [ARM] .gitignore: Ignore piggy.lzo, lib1funcs.S and vmlinux   Russell King - ARM Linux
• [PATCH] arm/mach-msm: Add CONFIG conditional for board-trout   Russell King - ARM Linux
  • [PATCH] arm/mach-msm: Add CONFIG conditional for board-trout   Daniel Walker
• Fix build error for i.MX51 (mx51_defconfig)   Russell King - ARM Linux
  • Fix build error for i.MX51 (mx51_defconfig)   Sascha Hauer
• [PATCHv10 2.6.34-rc6 4/5] mxc: Add generic USB HW initialization for MX51   Daniel Mack
• [RFC PATCH] create generic alignment api (v5)   Mathieu Desnoyers
• [PATCH] create generic alignment api (v5)   Mathieu Desnoyers
  • [PATCH] create generic alignment api (v5)   Mathieu Desnoyers
• [PATCH 1/2] create generic alignment api (v6)   Alexander Shishkin
  • [PATCH 2/2] [RFCv3] arm: add half-word __xchg   Alexander Shishkin
    • [PATCH 2/2] [RFCv3] arm: add half-word __xchg   Mathieu Desnoyers
  • [PATCH 1/2] create generic alignment api (v6)   Mathieu Desnoyers
• [RFC PATCH] create generic alignment api (v5)   Mathieu Desnoyers
• [PATCH 1/7] PL330: Add common core driver\   Dan Williams
  • [PATCH 1/7] PL330: Add common core driver\   jassi brar
• [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Dan Williams
  • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Linus Walleij
  • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Russell King - ARM Linux
    • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Linus Walleij
      • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Russell King - ARM Linux
      • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Linus Walleij
      • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Russell King - ARM Linux
      • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Linus WALLEIJ
      • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Dan Williams
      • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Linus Walleij
    • [PATCH 00/11] ARM: PrimeCell DMA Interface v5   Dan Williams
• [PATCH 2/3] DMAENGINE: DMA40 logical channel fixes   Dan Williams
• [PATCH 3/3] DMAENGINE: add PrimeCell generic DMA to PL022 v6   Dan Williams
  • [PATCH 3/3] DMAENGINE: add PrimeCell generic DMA to PL022 v6   Linus Walleij
• Versatile QEMU broken in -next   Linus Walleij
  • Versatile QEMU broken in -next   Russell King - ARM Linux
  • Versatile QEMU broken in -next   Rabin Vincent
    • Versatile QEMU broken in -next   Linus Walleij
• [PATCH] pxa/vpac270: PXAUDC init fix   Marek Vasut
  • [PATCH] pxa/vpac270: PXAUDC init fix   Eric Miao
• [PATCH] arm: Fix .gitignore for boot/compressed folder   Uwe Kleine-König
  • [PATCH] arm: Fix .gitignore for boot/compressed folder   Aguirre, Sergio
    • [PATCH] arm: Fix .gitignore for boot/compressed folder   Uwe Kleine-König
      • [PATCH] arm: Fix .gitignore for boot/compressed folder   Aguirre, Sergio
• [PATCH 0/5] USB: orion ehci patches for 2.6.35   Saeed Bishara
  • [PATCH 1/5] USB: add support for phy init for the Dove SoC   Saeed Bishara
• [PATCH 2/5] ARM: use the Dove USB phy setup   Saeed Bishara
  • [PATCH 3/5] USB: add clk structure for systems that support clkdev framework   Saeed Bishara
    • [PATCH 4/5] USB: manage the orion ehci clock using the clkdev   Saeed Bishara
      • [PATCH 5/5] USB: add power management support for orion ehci   Saeed Bishara
    • [PATCH 3/5] USB: add clk structure for systems that support clkdev framework   Russell King - ARM Linux
      • [PATCH 3/5] USB: add clk structure for systems that support clkdev framework   saeed bishara
      • [PATCH 3/5] USB: add clk structure for systems that support clkdev framework   Russell King - ARM Linux
      • [PATCH 3/5] USB: add clk structure for systems that support clkdev framework   saeed bishara
      • [PATCH 3/5] USB: add clk structure for systems that support clkdev framework   Russell King - ARM Linux
      • [PATCH 3/5] USB: add clk structure for systems that support clkdev framework   saeed bishara
      • [PATCH 3/5] USB: add clk structure for systems that support clkdev framework   Russell King - ARM Linux
      • [PATCH 3/5] USB: add clk structure for systems that support clkdev framework   saeed bishara
• [PATCH v6 0/2] spi: driver for Cirrus EP93xx SPI controller   Mika Westerberg
  • [PATCH v6 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Mika Westerberg
    • [spi-devel-general] [PATCH v6 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Linus Walleij
      • [spi-devel-general] [PATCH v6 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Mika Westerberg
      • [spi-devel-general] [PATCH v6 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Linus Walleij
      • [spi-devel-general] [PATCH v6 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   H Hartley Sweeten
      • [spi-devel-general] [PATCH v6 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Linus Walleij
    • [PATCH v6 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   H Hartley Sweeten
      • [PATCH v6 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Mika Westerberg
  • [PATCH v6 2/2] ep93xx: SPI driver platform support code   Mika Westerberg
    • [PATCH v6 2/2] ep93xx: SPI driver platform support code   H Hartley Sweeten
      • [PATCH v6 2/2] ep93xx: SPI driver platform support code   Russell King - ARM Linux
      • [PATCH v6 2/2] ep93xx: SPI driver platform support code   H Hartley Sweeten
      • [PATCH v6 2/2] ep93xx: SPI driver platform support code   Mika Westerberg
• [PATCH v4 0/3] Support for Cavium Networks CNS3xxx machines   Anton Vorontsov
  • [PATCH 1/3] ARM: cns3xxx: Add basic support for Cavium Networks CNS3xxx processors   Anton Vorontsov
  • [PATCH 2/3] ARM: cns3xxx: Add CNS3420 Validation Board support   Anton Vorontsov
  • [PATCH 3/3] ARM: cns3xxx: Add defconfig for CNS3420 validation board   Anton Vorontsov
• [at91] Save power by disabling the processor clock when CPU is idle   avictor.za at gmail.com
  • [at91] Save power by disabling the processor clock when CPU is idle   Russell King - ARM Linux
    • [at91] Save power by disabling the processor clock when CPU is idle   avictor.za at gmail.com
• [PATCH] fec.c: Fix memory corruption in fec_set_mac_address.   Mattias Walstrom
  • [PATCH] fec.c: Fix memory corruption in fec_set_mac_address.   Uwe Kleine-König
    • [PATCH] fec.c: Fix memory corruption in fec_set_mac_address.   Baruch Siach
• [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Linus Walleij
  • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Linus Walleij
    • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Russell King - ARM Linux
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Linus Walleij
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   jassi brar
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Linus Walleij
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   jassi brar
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Dan Williams
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   jassi brar
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Dan Williams
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   jassi brar
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Dan Williams
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   jassi brar
      • [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Dan Williams
• [PATCH 1/7] DMAENGINE: add generic PrimeCell interface to COH 901 318 v6   Linus Walleij
  • [PATCH 1/7] DMAENGINE: add generic PrimeCell interface to COH 901 318 v6   Dan Williams
    • [PATCH 1/7] DMAENGINE: add generic PrimeCell interface to COH 901 318 v6   Dan Williams
      • [PATCH 1/7] DMAENGINE: add generic PrimeCell interface to COH 901 318 v6   Linus WALLEIJ
      • [PATCH 1/7] DMAENGINE: add generic PrimeCell interface to COH 901 318 v6   Dan Williams
      • PrimeCell interface   Linus WALLEIJ
    • [PATCH 1/7] DMAENGINE: add generic PrimeCell interface to COH 901 318 v6   Linus WALLEIJ
• [PATCH 2/7] DMAENGINE: DMA40 bug when checking paused status   Linus Walleij
• [PATCH 3/7] DMAENGINE: DMA40 fix for allocation of logical channel 0   Linus Walleij
• [PATCH 4/7] DMAENGINE: add PrimeCell generic DMA to PL022 v7   Linus Walleij
• [PATCH 5/7] ARM: add PrimeCell generic DMA to PL011 v6   Linus Walleij
  • [PATCH 5/7] ARM: add PrimeCell generic DMA to PL011 v6   Russell King - ARM Linux
• [PATCH 6/7] ARM: add PrimeCell generic DMA to MMCI/PL180 v6   Linus Walleij
• [PATCH 7/7] ARM: config U300 PL180 PL011 PL022 for DMA v5   Linus Walleij
• Updating Didj for Modern Times   Corbin Simpson
• [PATCH V3] ST SPEAr: Adding support for shared irq layer   Viresh KUMAR
• [PATCH V3 resend] ST SPEAr: Adding support for shared irq layer   Viresh KUMAR
  • [PATCH V3 resend] ST SPEAr: Adding support for shared irq layer   Russell King - ARM Linux
    • [PATCH V3 resend] ST SPEAr: Adding support for shared irq layer   Viresh KUMAR
• [PATCH 0/8] Initial implementation of kdump for ARM   Mika Westerberg
• [GIT PULL] generic arm for MSM try 3   Russell King - ARM Linux
  • [GIT PULL] generic arm for MSM try 3   Daniel Walker
• [PATCH] ARM: mx3: Fix a race condition in mxcmmc   Daniel Mack
  • [PATCH] ARM: mx3: Fix a race condition in mxcmmc   Daniel Mack
    • [PATCH] ARM: mx3: Fix a race condition in mxcmmc   Daniel Mack
      • [PATCH] ARM: mx3: Fix a race condition in mxcmmc   Sascha Hauer
• [PATCHv10 2.6.34-rc6 1/5] mxc: Update GPIO for USB support on Freescale MX51 Babbage HW   Sascha Hauer
• [RFC] Prohibit ioremap() on kernel managed RAM   George G. Davis
  • [RFC] Prohibit ioremap() on kernel managed RAM   Catalin Marinas
    • [RFC] Prohibit ioremap() on kernel managed RAM   George G. Davis
      • [RFC] Prohibit ioremap() on kernel managed RAM   Russell King - ARM Linux
      • [RFC] Prohibit ioremap() on kernel managed RAM   George G. Davis
• Query about arch/arm/mach-realview ?   George G. Davis
• Add support for the 16-way L310 L2 cache controller   Jason McMullan
• [PATCH 2.6.34-rc6] mxc: gadget: Fix bitfield for calculating maximum packet size   Dinh.Nguyen at freescale.com
  • [PATCH 2.6.34-rc6] mxc: gadget: Fix bitfield for calculating maximum packet size   Sergei Shtylyov
• [PATCH v3] arm: Fix .gitignore for boot/compressed folder   Sergio Aguirre
  • [PATCH v3] arm: Fix .gitignore for boot/compressed folder   Russell King - ARM Linux
    • [PATCH v3] arm: Fix .gitignore for boot/compressed folder   Aguirre, Sergio
• [patch 0/2] Simtec kirkwood patches [resend]   Nicolas Pitre
• [PATCH 0/3] OMAP PM core updates for 2.6.35   Kevin Hilman
  • [PATCH 1/3] OMAP3: Serial: Improved sleep logic   Kevin Hilman
  • [PATCH 2/3] OMAP3: PRCM interrupt: only check and clear enabled PRCM IRQs   Kevin Hilman
  • [PATCH 3/3] OMAP3: PM: Add milliseconds interface to suspend wakeup timer   Kevin Hilman
• [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3   Pandita, Vikram
  • [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3   Tony Lindgren
    • [PATCH 02a/11] omap: Use a memory address for storing the debug port info instead of UART1 scratchpad   Tony Lindgren
    • [PATCH 02b/11] omap2/3: Fix DEBUG_LL for omap zoom2/3   Tony Lindgren
      • [PATCH 02b/11] omap2/3: Fix DEBUG_LL for omap zoom2/3   Pandita, Vikram
      • [PATCH 02b/11] omap2/3: Fix DEBUG_LL for omap zoom2/3   Tony Lindgren
• Git pull request: Orion/Kirkwood stuff for 2.6.35   Nicolas Pitre
  • Git pull request: Orion/Kirkwood stuff for 2.6.35   Ben Dooks
    • Git pull request: Orion/Kirkwood stuff for 2.6.35   Nicolas Pitre
      • Git pull request: Orion/Kirkwood stuff for 2.6.35   Ben Dooks
  • Git pull request: Orion/Kirkwood stuff for 2.6.35   Nicolas Pitre
• S3C6410 power management support status   Ben Dooks
  • S3C6410 power management support status   Yauhen Kharuzhy
    • S3C6410 power management support status   Ben Dooks
    • S3C6410 power management support status   Ben Dooks
      • S3C6410 power management support status   Yauhen Kharuzhy
      • S3C6410 power management support status   Ben Dooks
• S3C6410 power management support status   Ben Dooks
• S3C6410 power management support status   Ben Dooks
• [PATCH] MAINTAINERS: arch/arm/s3c and arch/arm/s5p   Ben Dooks
  • [PATCH] MAINTAINERS: arch/arm/s3c and arch/arm/s5p   Kyungmin Park
    • [PATCH] MAINTAINERS: arch/arm/s3c and arch/arm/s5p   Kukjin Kim
• [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig   Tony Lindgren
  • [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig   Tomi Valkeinen
    • [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig   Tony Lindgren
      • [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig   Tomi Valkeinen
      • [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig   Tony Lindgren
• [PATCH v2 1/2] ARM: S5PV210: Add S5PV210 GPIO support   Kukjin Kim
  • [PATCH v2 1/2] ARM: S5PV210: Add S5PV210 GPIO support   Kyungmin Park
  • [PATCH v2 1/2] ARM: S5PV210: Add S5PV210 GPIO support   Ben Dooks
• [PATCH 2/2] ARM: S5PV210: Add GPIO register definitions   Kukjin Kim
  • [PATCH 2/2] ARM: S5PV210: Add GPIO register definitions   Ben Dooks
• [PATCH 1/4] nomadik-gpio: fix mask/unmask   Rabin Vincent
  • [PATCH 2/4] nomadik-gpio: factor out helper to enable/disable irqs   Rabin Vincent
  • [PATCH 3/4] nomadik-gpio: don't enable in set_type   Rabin Vincent
  • [PATCH 4/4] nomadik-gpio: set a default trigger for interrupts   Rabin Vincent
• [PATCH] [ARM] Do not call flush_cache_user_range with mmap_sem held   Dima Zavin
  • [PATCH] [ARM] Do not call flush_cache_user_range with mmap_sem held   Russell King - ARM Linux
• 2.6.34-rc6 regression: pcmcia no longer compiles   Pavel Machek
  • 2.6.34-rc6 regression: pcmcia no longer compiles   Marc Zyngier
    • 2.6.34-rc6 regression: pcmcia no longer compiles   Dominik Brodowski
• [PATCH 1/2] ARM: S5PV210: Add IRQ definitions for EINT   Kukjin Kim
  • [PATCH 1/2] ARM: S5PV210: Add IRQ definitions for EINT   Ben Dooks
• [PATCH 2/2] ARM: S5PV210: Add EINT and EINT Group Support   Kukjin Kim
  • [PATCH 2/2] ARM: S5PV210: Add EINT and EINT Group Support   Ben Dooks
• [PATCH] ARM: S5PV210: Add Power Management Support   Kukjin Kim
  • [PATCH] ARM: S5PV210: Add Power Management Support   Ben Dooks
    • [PATCH] ARM: S5PV210: Add Power Management Support   Kyungmin Park
• [rtc-linux] Re: [PATCH v3] rtc: driver for the DryIce block found in i.MX25 chips   Baruch Siach
• [PATCH v2.6.34-rc2] s3c: Fix CONFIG_MTD_NAND_S3C2410_CLKSTOP   Ben Dooks
  • [PATCH v2.6.34-rc2] s3c: Fix CONFIG_MTD_NAND_S3C2410_CLKSTOP   christian pellegrin
    • [PATCH v2.6.34-rc2] s3c: Fix CONFIG_MTD_NAND_S3C2410_CLKSTOP   Ben Dooks
• [PATCH v2.6.34-rc2] s3c: Fix GPIOs bank H and J not being preserved during suspend on S3C24XX   Ben Dooks
  • [PATCH v2.6.34-rc2] s3c: Fix GPIOs bank H and J not being preserved during suspend on S3C24XX   christian pellegrin
    • [PATCH v2.6.34-rc2] s3c: Fix GPIOs bank H and J not being preserved during suspend on S3C24XX   Ben Dooks
• [PATCH 1/2] DMAENGINE: DMA40 U8500 platform configuration v6   Linus Walleij
• [PATCH 2/2] ARM: config Ux500 PL011 PL022 for DMA v2   Linus Walleij
• [PATCH 1/2] regulator: make max8925 sharing one driver structure   Haojian Zhuang
  • [PATCH 1/2] regulator: make max8925 sharing one driver structure   Mark Brown
  • [PATCH 1/2] regulator: make max8925 sharing one driver structure   Samuel Ortiz
    • [PATCH 1/2] regulator: make max8925 sharing one driver structure   Liam Girdwood
• [PATCH 2/2] regulator: use array in 88pm860x   Haojian Zhuang
  • [PATCH 2/2] regulator: use array in 88pm860x   Mark Brown
  • [PATCH 2/2] regulator: use array in 88pm860x   Samuel Ortiz
• [PATCH] Add support for Aquita board (Samsung S5PC110 based)   Marek Szyprowski
• [PATCH 1/2] nomadik: define clocks statically   Rabin Vincent
• [PATCH 2/2] nomadik-gpio: use clk API   Rabin Vincent
• [PATCH] [arm l2x0] Extend cache-l2x0 to support the 16-way PL310   Will Deacon
• [PATCH] ARM: SAMSUNG: Move HWMON from plat-s3c24xx to plat-samsung   Maurus Cuelenaere
  • [PATCH] ARM: SAMSUNG: Move HWMON from plat-s3c24xx to plat-samsung   Maurus Cuelenaere
• [PATCH] ARM: S3C64XX: Add USB clock source frequency as driver data to s3c-hsotg   Maurus Cuelenaere
  • [PATCH] ARM: S3C64XX: Add USB clock source frequency as driver data to s3c-hsotg   Ben Dooks
    • [PATCH] ARM: S3C64XX: Add USB clock source frequency as driver data to s3c-hsotg   Maurus Cuelenaere
• [PATCH 1/2] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Maurus Cuelenaere
• [PATCH 2/2] ARM: S3C64XX: Add touchscreen platform device definition   Maurus Cuelenaere
• [PATCH v2] Add support for Samsung SoC OneNAND controllers   Artem Bityutskiy
• [PATCH] regulator: use array in 88pm860x   Haojian Zhuang
• [PATCH] regulator: use voltage number array in 88pm860x   Haojian Zhuang
• [PATCH 9/9] ARM: add DMA support to sh7372, enable DMA for SDHI   Guennadi Liakhovetski
  • [PATCH 9/9] ARM: add DMA support to sh7372, enable DMA for SDHI   Andrew Morton
    • [PATCH 9/9] ARM: add DMA support to sh7372, enable DMA for SDHI   Guennadi Liakhovetski
      • [PATCH 9/9] ARM: add DMA support to sh7372, enable DMA for SDHI   Andrew Morton
      • [PATCH 9/9] ARM: add DMA support to sh7372, enable DMA for SDHI   Guennadi Liakhovetski
  • [PATCH 9/9 v2] ARM: mach-shmobile: add DMA support to sh7372, enable DMA for SDHI   Guennadi Liakhovetski
    • [PATCH 9/9 v2] ARM: mach-shmobile: add DMA support to sh7372, enable DMA for SDHI   Paul Mundt
• [PATCH] ARM: Gemini: fix compiler error in copypage-fa.c   Hans Ulli Kroll
  • [PATCH] ARM: Gemini: fix compiler error in copypage-fa.c   Russell King - ARM Linux
    • [GIT-PULL] ARM: Gemini: fix compiler error in copypage-fa.c   Hans Ulli Kroll
      • [GIT-PULL] ARM: Gemini: fix compiler error in copypage-fa.c   Paulius Zaleckas
  • [PATCH] ARM: Gemini: fix compiler error in copypage-fa.c   Sergei Shtylyov
• build error of v2.6.34-rc6   Eric Miao
  • build error of v2.6.34-rc6   Gadiyar, Anand
• [PATCH] [arm l2x0] Extend cache-l2x0 to support the 16-way PL310 (v3)   Jason S. McMullan
  • [PATCH] [arm l2x0] Extend cache-l2x0 to support the 16-way PL310 (v3)   Jason S. McMullan
    • [PATCH] [arm l2x0] Extend cache-l2x0 to support the 16-way PL310 (v3)   Catalin Marinas
• [PATCH 2.6.34-rc6] mxc: gadget: Fix bitfield for calculating maximum packet size   Dinh.Nguyen at freescale.com
• U5500 patches   Russell King - ARM Linux
  • U5500 patches   Russell King - ARM Linux
    • U5500 patches   Rabin Vincent
• [PATCH] ARM: Fix virtual kernel memory printing for sparsemem   Marek Vasut
• [PATCH 2/2] lockdep: allow user to disable CONFIG_TRACE_IRQFLAGS   Ming Lei
• [PATCH] ARM: Fix virtual kernel memory printing for sparsemem   Marek Vasut
  • [PATCH] ARM: Fix virtual kernel memory printing for sparsemem   Russell King - ARM Linux
    • [PATCH] ARM: Fix virtual kernel memory printing for sparsemem   Catalin Marinas
      • [PATCH] ARM: Fix virtual kernel memory printing for sparsemem   Marek Vasut
• [PATCH 0/8] Various patches for comments and upstream   Catalin Marinas
  • [PATCH 1/8] ARM: Improve the L2 cache performance when PL310 is used   Catalin Marinas
    • [PATCH 1/8] ARM: Improve the L2 cache performance when PL310 is used   Jason McMullan
      • [PATCH 1/8] ARM: Improve the L2 cache performance when PL310 is used   Catalin Marinas
  • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Catalin Marinas
    • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Jason McMullan
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Catalin Marinas
    • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   George G. Davis
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   George G. Davis
    • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Russell King - ARM Linux
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Russell King - ARM Linux
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Russell King - ARM Linux
      • [PATCH 2/8] ARM: Implement read/write for ownership in the ARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   George G. Davis
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   George G. Davis
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   George G. Davis
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Russell King - ARM Linux
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Russell King - ARM Linux
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Russell King - ARM Linux
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Russell King - ARM Linux
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Russell King - ARM Linux
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Russell King - ARM Linux
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Ronen Shitrit
      • [PATCH 2/8] ARM: Implement read/write for ownership in theARMv6 DMA cache ops   Catalin Marinas
      • [PATCH 2/8] ARM: Implement read/write for ownership intheARMv6 DMA cache ops   Catalin Marinas
  • [PATCH 3/8] ARM: Align machine_desc.phys_io to a 1MB section   Catalin Marinas
  • [PATCH 4/8] ARM: Remove the domain switching on ARMv6k/v7 CPUs   Catalin Marinas
  • [PATCH 5/8] ARM: Fix the __arm_ioremap_caller() definition in nommu.c   Catalin Marinas
    • [PATCH 5/8] ARM: Fix the __arm_ioremap_caller() definition in nommu.c   Russell King - ARM Linux
  • [PATCH 6/8] ARM: Implement copy_to_user_page() for noMMU   Catalin Marinas
    • [PATCH 6/8] ARM: Implement copy_to_user_page() for noMMU   Russell King - ARM Linux
  • [PATCH 7/8] ARM: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP   Catalin Marinas
    • [PATCH 7/8] ARM: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP   Russell King - ARM Linux
      • [PATCH 7/8] ARM: Use the Inner Shareable I-cache and BTB opson ARMv7 SMP   Catalin Marinas
  • [PATCH 8/8] ARM: Implement phys_mem_access_prot() to avoid attributes aliasing   Catalin Marinas
  • [PATCH 0/8] Various patches for comments and upstream   Catalin Marinas
• [PATCH 1/2] pxa/vpac270: Enable SparseMEM for 256 MB of RAM   Marek Vasut
  • [PATCH 2/2] pxa/vpac270: Add PMIC support   Marek Vasut
  • [PATCH 1/2] pxa/vpac270: Enable SparseMEM for 256 MB of RAM   Jonathan McDowell
    • [PATCH 1/2] pxa/vpac270: Enable SparseMEM for 256 MB of RAM   Marek Vasut
  • [PATCH 1/2] pxa/vpac270: Enable SparseMEM for 256 MB of RAM   Marek Vasut
• Suspicious compilation warning   Marcelo Jimenez
  • Suspicious compilation warning   Russell King - ARM Linux
    • Suspicious compilation warning   Marcelo Jimenez
• [PATCH] Allow the i.mx25 3DStack target to compile.   Jean-Christophe DUBOIS
  • [PATCH] Allow the i.mx25 3DStack target to compile.   Baruch Siach
    • [PATCH] Allow the i.mx25 3DStack target to compile.   Jean-Christophe Dubois
• [PATCH v4 4/5(7)] input: serio: add support for Amstrad Delta serial keyboard port   Tony Lindgren
  • [PATCH v4 4/5(7)] input: serio: add support for Amstrad Delta serial keyboard port   Russell King - ARM Linux
    • [PATCH v4 4/5(7)] input: serio: add support for Amstrad Delta serial keyboard port   Dmitry Torokhov
• How to allocate a new machine type?   Corbin Simpson
  • How to allocate a new machine type?   Russell King - ARM Linux
    • How to allocate a new machine type?   Corbin Simpson
      • How to allocate a new machine type?   Marek Vasut
• [PATCH] pxa: Remove unused MFP LPM definition   David Hunter
  • [PATCH] pxa: Remove unused MFP LPM definition   Eric Miao
    • [PATCH] pxa: Remove unused MFP LPM definition   Marek Vasut
• [PATCH v8 0/2] sDMA descriptor autoloading feature   Madhusudhan
  • [PATCH v8 0/2] sDMA descriptor autoloading feature   Venkatraman S
    • [PATCH v8 0/2] sDMA descriptor autoloading feature   Shilimkar, Santosh
• [PATCH 01/10] [ARM] pxa: extend to support 96 IRQs   Eric Miao
  • [PATCH 01/10] [ARM] pxa: extend to support 96 IRQs   Haojian Zhuang
    • [PATCH 01/10] [ARM] pxa: extend to support 96 IRQs   Eric Miao
• Linux Bluetooth HFP through usp pcm design questions   Bin Shi
  • Linux Bluetooth HFP through usp pcm design questions   Eric Miao
    • Linux Bluetooth HFP through usp pcm design questions   Bin Shi
• [PATCH v2 1/2] regulator: make 88pm860x sharing one driver structure   Haojian Zhuang
  • [PATCH v2 1/2] regulator: make 88pm860x sharing one driver structure   Mark Brown
  • [PATCH v2 1/2] regulator: make 88pm860x sharing one driver structure   Liam Girdwood
• [PATCH v2 2/2] regulator: use voltage number array in 88pm860x   Haojian Zhuang
  • [PATCH v2 2/2] regulator: use voltage number array in 88pm860x   Mark Brown
• [PATCH 02/10] [ARM] pxa: rename mfp-pxa930 to mfp-pxa9xx   Eric Miao
  • [PATCH 02/10] [ARM] pxa: rename mfp-pxa930 to mfp-pxa9xx   Haojian Zhuang
• [patch 1/2] kirkwood: allow machines to register RnB line with mtd driver   Artem Bityutskiy
• [PATCH 06/10] [ARM] pxa: clean code in hardware.h   Eric Miao
• [PATCH 04/10] [ARM] pxa: update cpuid pattern of pxa9xx   Eric Miao
• [PATCH 05/10] [ARM] pxa: fix the cpu_is_pxa950   Eric Miao
• [PATCH v2 0/8] Initial implementation of kdump for ARM   Mika Westerberg
  • [PATCH v2 1/8] arm: kdump: reserve memory for crashkernel   Mika Westerberg
  • [PATCH v2 2/8] arm: kdump: implement crash_setup_regs()   Mika Westerberg
  • [PATCH v2 3/8] arm: kdump: implement machine_crash_shutdown()   Mika Westerberg
  • [PATCH v2 4/8] arm: kdump: skip indirection page when crashing   Mika Westerberg
  • [PATCH v2 5/8] arm: kdump: implement copy_oldmem_page()   Mika Westerberg
  • [PATCH v2 6/8] arm: allow passing an ELF64 header to elf_check_arch()   Mika Westerberg
    • [PATCH v2 6/8] arm: allow passing an ELF64 header to elf_check_arch()   Russell King - ARM Linux
      • [PATCH v2 6/8] arm: allow passing an ELF64 header to elf_check_arch()   Mika Westerberg
      • [PATCH v2 6/8] arm: allow passing an ELF64 header to elf_check_arch()   Russell King - ARM Linux
      • [PATCH v2 6/8] arm: allow passing an ELF64 header to elf_check_arch()   Mika Westerberg
  • [PATCH v2 7/8] arm: kdump: add support for elfcorehdr= parameter   Mika Westerberg
  • [PATCH v2 8/8] arm: kdump: add CONFIG_CRASH_DUMP Kconfig option   Mika Westerberg
  • [PATCH v2 0/8] Initial implementation of kdump for ARM   Mika Westerberg
• [PATCH v2 0/2] kexec-tools: ARM kernel crashdump support   Mika Westerberg
  • [PATCH v2 2/2] kexec: implement ARM crashdump support   Mika Westerberg
  • [PATCH v2 0/2] kexec-tools: ARM kernel crashdump support   Simon Horman
• [PATCH v2 1/2] kexec: introduce phys_to_virt() function   Mika Westerberg
• spitz 2.6.34-rc4: fix On/off key name to fix warning during boot   Eric Miao
• adding pxa3xx_nand_flash to platform data   Siddarth Gore
  • adding pxa3xx_nand_flash to platform data   Eric Miao
    • adding pxa3xx_nand_flash to platform data   Eric Miao
      • adding pxa3xx_nand_flash to platform data   Haojian Zhuang
      • adding pxa3xx_nand_flash to platform data   Siddarth Gore
      • adding pxa3xx_nand_flash to platform data   Lei Wen
• [RESEND PATCHv3 0/4] Adding soc related info into /proc/cpuinfo   Eduardo Valentin
  • [RESEND PATCHv3 3/4] mach-omap1: Add SoC info data for OMAP1 into /proc/cpuinfo   Eduardo Valentin
  • [RESEND PATCHv3 0/4] Adding soc related info into /proc/cpuinfo   Russell King - ARM Linux
    • [RESEND PATCHv3 0/4] Adding soc related info into /proc/cpuinfo   Eduardo Valentin
• [RESEND PATCHv3 1/4] ARM: Introduce SoC Info into /proc/cpuinfo   Eduardo Valentin
• [RESEND PATCHv3 2/4] mach-omap2: Add SoC info data for OMAP2, 3, 4 into /proc/cpuinfo   Eduardo Valentin
• [RESEND PATCHv3 4/4] OMAP3: export chip IDCODE, Production ID and Die ID   Eduardo Valentin
• [PATCH 1/6] pxa: sanitize IRQ registers access based on offset   Eric Miao
• [PATCH] [ARM] pxa: sanitize IRQ registers access based on offset   Eric Miao
• [PATCH] SPI: fix up some PL022 confusion   Linus Walleij
  • [PATCH] SPI: fix up some PL022 confusion   Linus Walleij
    • [PATCH] SPI: fix up some PL022 confusion   Linus Walleij
• [PATCH v8 1/2] sDMA: descriptor autoloading feature   Shilimkar, Santosh
  • [PATCH v8 1/2] sDMA: descriptor autoloading feature   Venkatraman S
    • [PATCH v8 1/2] sDMA: descriptor autoloading feature   Shilimkar, Santosh
      • [PATCH v8 1/2] sDMA: descriptor autoloading feature   Venkatraman S
      • [PATCH v8 1/2] sDMA: descriptor autoloading feature   Shilimkar, Santosh
      • [PATCH v8 1/2] sDMA: descriptor autoloading feature   Venkatraman S
• [PATCH 1/1] mx31smartbot: change the config of a gpio   Valentin Longchamp
  • [PATCH 1/1] mx31smartbot: change the config of a gpio   Sascha Hauer
• [PATCH v8 1/2] sDMA: descriptor autoloading feature   Adrian Hunter
  • [PATCH v8 1/2] sDMA: descriptor autoloading feature   Venkatraman S
• Suspicious compilation warning   Sergei Shtylyov
  • Suspicious compilation warning   Kyungmin Park
    • Suspicious compilation warning   Marcelo Jimenez
• [PATCH] serial/imx: only parse for iomem resources once   Sergei Shtylyov
• [PATCH]omap:mux.c waring removal   Munegowda, Keshava
• [PATCH] [arm l2x0] Extend cache-l2x0 to support the 16-way PL310 (v3)   Jason McMullan
  • [PATCH] [arm l2x0] Extend cache-l2x0 to support the 16-way PL310 (v3)   Catalin Marinas
• [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
  • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
    • [RFC] Initial attempt to make ARM use LMB   Tony Lindgren
      • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
      • [RFC] Initial attempt to make ARM use LMB   Tony Lindgren
      • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
      • [RFC] Initial attempt to make ARM use LMB   Shilimkar, Santosh
      • [RFC] Initial attempt to make ARM use LMB   Grazvydas Ignotas
      • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
      • [RFC] Initial attempt to make ARM use LMB   Grazvydas Ignotas
      • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
      • [RFC] Initial attempt to make ARM use LMB   Tomi Valkeinen
      • [RFC] Initial attempt to make ARM use LMB   Tony Lindgren
      • [RFC] Initial attempt to make ARM use LMB   Tomi Valkeinen
      • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
      • [RFC] Initial attempt to make ARM use LMB   Tomi Valkeinen
      • [RFC] Initial attempt to make ARM use LMB   Tony Lindgren
      • [RFC] Initial attempt to make ARM use LMB   Shilimkar, Santosh
      • [RFC] Initial attempt to make ARM use LMB   Tony Lindgren
• [PATCH] plat-nomadik: use the MTU clocksrc for sched_clock   Linus Walleij
• Old DSS code broken as module (was "RE: [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig")   Aguirre, Sergio
  • Old DSS code broken as module (was "RE: [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig")   Tony Lindgren
    • Old DSS code broken as module (was "RE: [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig")   Aguirre, Sergio
  • Old DSS code broken as module (was "RE: [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig")   Tomi Valkeinen
• [PATCH 00/18] omap platform data and board updates for 2.6.35 merge window   Tony Lindgren
  • [PATCH 01/18] OMAP2/3: Add V4L2 DSS driver support in device.c   Tony Lindgren
  • [PATCH 02/18] omap1: amsdelta: defconfig updates   Tony Lindgren
  • [PATCH 03/18] omap2: Add I2C bus 1 initialisation for 2430sdp   Tony Lindgren
  • [PATCH 04/18] omap2: Add OHCI USB platform init for 2430 SDP   Tony Lindgren
  • [PATCH 05/18] omap2: select ARCH_OMAP_OTG for OMAP2430 SDP   Tony Lindgren
  • [PATCH 06/18] omap: Devkit8000: Add mux initialization   Tony Lindgren
  • [PATCH 07/18] omap: Devkit8000: Update default configuration   Tony Lindgren
  • [PATCH 08/18] can:ti_hecc: board specific hookup on AM3517EVM   Tony Lindgren
  • [PATCH 09/18] can:ti_hecc: Enable CAN support on AM3517   Tony Lindgren
  • [PATCH 10/18] AM35xx EMAC : define submodule offsets   Tony Lindgren
  • [PATCH 11/18] AM35xx : Platform specific hookup for EMAC module   Tony Lindgren
  • [PATCH 12/18] OMAP3 : clock data: Update name string for EMAC clocks   Tony Lindgren
    • [PATCH 12/18] OMAP3 : clock data: Update name string for EMAC clocks   Russell King - ARM Linux
      • [PATCH 12/18] OMAP3 : clock data: Update name string for EMAC clocks   Tony Lindgren
      • [PATCH 12/18] OMAP3 : clock data: Update name string for EMAC clocks   Tony Lindgren
  • [PATCH 13/18] AM3517 defconfig update : enable EMAC support   Tony Lindgren
  • [PATCH 14/18] omap: Overo: Add support for second ethernet port   Tony Lindgren
    • [PATCH 14/18] omap: Overo: Add support for second ethernet port   Steve Sakoman
      • [PATCH 14/18] omap: Overo: Add support for second ethernet port   Tony Lindgren
      • [PATCH 14/18 FIX] omap: Overo: Add support for second ethernet port   Steve Sakoman
  • [PATCH 15/18] omap: rx51: Change the TWL4030 VMMC2 voltage constraints andsupply name   Tony Lindgren
  • [PATCH 16/18] omap: rx51: Add i2c2 board_info with tlv320aic3x   Tony Lindgren
  • [PATCH 17/18] omap: rx51: Add supplies for the tlv320aic3x codec driver   Tony Lindgren
    • [PATCH 17/18] omap: rx51: Add supplies for the tlv320aic3x codec driver   Eduardo Valentin
      • [PATCH 17/18] omap: rx51: Add supplies for the tlv320aic3x codec driver   Eduardo Valentin
      • [PATCH 17/18] omap: rx51: Add supplies for the tlv320aic3x codec driver   Jarkko Nikula
  • [PATCH 18/18] AM35x: fix UI card EHCI port and LCD dependency   Tony Lindgren
• [at91] Save power by disabling the processor clock when CPU is idle   Uwe Kleine-König
  • [at91] Save power by disabling the processor clock when CPU is idle   Anders Larsen
• [PATCH 1/9] Enable Acer n35 architecture if Acer n30 is selected   Pinkava J.
  • [PATCH 2/9] fix: suspended wrong USB port on Acer n35   Pinkava J.
    • [PATCH 3/9] Add RTC platform device for Acer n30 / Acer n35   Pinkava J.
      • [PATCH 4/9] Add support for blue LED on Acer n35   Pinkava J.
      • [PATCH 5/9] Add support for red flashing LED on Acer n35   Pinkava J.
      • [PATCH 6/9] Enable wake-up by Power button on Acer n35   Pinkava J.
      • [PATCH 7/9] Add support for MMC card reader on Acer n30 / Acer n35   Pinkava J.
      • [PATCH 8/9] Add support for power on/off on Acer n30 / Acer n35 MMC card reader   Pinkava J.
      • [PATCH 7/9] Add support for MMC card reader on Acer n30 / Acer n35   Ben Dooks
      • [PATCH 5/9] Add support for red flashing LED on Acer n35   Ben Dooks
      • [PATCH 1/8] Enable Acer n35 architecture if Acer n30 is selected   Pinkava J.
      • [PATCH 2/8] fix: suspended wrong USB port on Acer n35   Pinkava J.
• PATCHv1 2.6.34-rc6 0/3-Enable usb gadget on freescale mx51 babbage hw   Dinh Nguyen
• [PATCHv1 2.6.34-rc6 1/3] mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core   Dinh Nguyen
  • [PATCHv1 2.6.34-rc6 2/3] mx5: change usb clock source from pll3 to pll2   Dinh Nguyen
    • [PATCHv1 2.6.34-rc6 3/3] mx5: enable usb gadget for freescale mx51 babbage board   Dinh Nguyen
      • [PATCHv1 2.6.34-rc6 3/3] mx5: enable usb gadget for freescale mx51 babbage board   Sascha Hauer
    • [PATCHv1 2.6.34-rc6 2/3] mx5: change usb clock source from pll3 to pll2   Sascha Hauer
  • [PATCHv1 2.6.34-rc6 1/3] mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core   Fabio Estevam
• [PATCH] arch/arm: Use constants instead of magic numbers in do_gettimeofday.   Corbin Simpson
  • [PATCH] arch/arm: Use constants instead of magic numbers in do_gettimeofday.   Ben Dooks
    • [PATCH] arch/arm: Use constants instead of magic numbers in do_gettimeofday.   Corbin Simpson
• [PATCH] pxa3xx_nand: mtd scan id process could be defined by   Lei Wen
• [PATCH] mtd: pxa3xx_nand: mtd scan id process could be   Lei Wen
• [PATCH 1/1] mfd: delay to mask tsc irq in max8925   Haojian Zhuang
• [PATCH] pxa3xx_nand: add two chip select   Lei Wen
• [PATCH] pxa3xx_nand: add cmdline part parser support   Lei Wen
• [PATCH] mtd: pxa3xx_nand: add cmdline part parser support   Lei Wen
• [PATCH] pxa3xx_nand: reimplment read oob command to increase   Lei Wen
• [PATCH] mtd: pxa3xx_nand: reimplment read oob command to   Lei Wen
• [PATCH] ARM: S5P: Add System Timer   Kukjin Kim
• [PATCH v7 0/2] spi: driver for Cirrus EP93xx SPI controller   Mika Westerberg
  • [PATCH v7 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Mika Westerberg
    • [PATCH v7 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Martin Guy
      • [PATCH v7 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Martin Guy
      • [PATCH v7 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Mika Westerberg
      • [PATCH v7 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Martin Guy
      • [PATCH v7 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Mika Westerberg
    • [PATCH v7 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Martin Guy
    • [PATCH v7 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Mika Westerberg
      • [PATCH v7 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Grant Likely
• [PATCH v7 2/2] ep93xx: SPI driver platform support code   Mika Westerberg
  • [PATCH v7 2/2] ep93xx: SPI driver platform support code   Martin Guy
• SAMSUNG kernel tree merge plans   Ben Dooks
  • SAMSUNG kernel tree merge plans   Marek Szyprowski
    • SAMSUNG kernel tree merge plans   Ben Dooks
      • SAMSUNG kernel tree merge plans   Marek Szyprowski
  • SAMSUNG kernel tree merge plans   Vasily Khoruzhick
    • SAMSUNG kernel tree merge plans   Ben Dooks
• [PATCH] ARM: S5P: Add System Timer   Ben Dooks
• [GIT PULL] pxa: fixes for v2.6.34-rc5   Eric Miao
• [PATCH v1 3/3] ARM: S5P: Add Camera interface (video postprocessor) driver   Ben Dooks
  • [PATCH v1 3/3] ARM: S5P: Add Camera interface (video postprocessor) driver   Sylwester Nawrocki
• [PATCH v8 2/2] omap hsmmc: adaptation of sdma descriptor autoloading feature   Venkatraman S
  • [PATCH v8 2/2] omap hsmmc: adaptation of sdma descriptor autoloading feature   Shilimkar, Santosh
• [PATCH 01/20] pxa3xx_nand: refuse the flash definition get from platform   Haojian Zhuang
  • [PATCH 01/20] pxa3xx_nand: refuse the flash definition get from platform   Daniel Mack
    • [PATCH 01/20] pxa3xx_nand: refuse the flash definition get from platform   Haojian Zhuang
• [PATCH 02/20] pxa3xx_nand: introduce common timing to reduce read id times   Haojian Zhuang
• [PATCH 03/20] pxa3xx_nand: remove the flash info in driver structure   Haojian Zhuang
• [PATCH 04/20] pxa3xx_nand: make scan procedure more clear   Haojian Zhuang
• [PATCH 05/20] pxa3xx_nand: rework irq logic   Haojian Zhuang
• [PATCH v2] ARM: Add support for LZMA-compressed kernel images   Andrea Adami
  • [PATCH v2] ARM: Add support for LZMA-compressed kernel images   Albin Tonnerre
    • [PATCH v2] ARM: Add support for LZMA-compressed kernel images   Eric Miao
      • [PATCH v2] ARM: Add support for LZMA-compressed kernel images   Gadiyar, Anand
  • [PATCH v2] ARM: Add support for LZMA-compressed kernel images   Russell King - ARM Linux
• [PATCH 06/20] pxa3xx_nand: unify prepare command   Haojian Zhuang
• [PATCH 07/20] pxa3xx_nand: mtd scan id process could be defined by driver itself   Haojian Zhuang
• [PATCH 08/20] pxa3xx_nand: remove detect configure function   Haojian Zhuang
• [PATCH 09/20] pxa3xx_nand: add two chip select   Haojian Zhuang
• [PATCH 10/20] pxa3xx_nand: add bch ecc support   Haojian Zhuang
• [PATCH 11/20] pxa3xx_nand: add debug messege   Haojian Zhuang
• [PATCH 12/20] pxa3xx_nand: enable 4k page operation   Haojian Zhuang
• [PATCH 13/20] pxa3xx_nand: show the real time used by the controller   Haojian Zhuang
• [PATCH 14/20] pxa3xx_nand: add polling mode support   Haojian Zhuang
• [PATCH 15/20] [ARM] mmp: add nand support to mmp2   Haojian Zhuang
• [PATCH 16/20] pxa3xx_nand: fix reset timeout on mmp2   Haojian Zhuang
• [PATCH 17/20] pxa3xx_nand: add cmdline part parser support   Haojian Zhuang
  • [PATCH 17/20] pxa3xx_nand: add cmdline part parser support   David Woodhouse
    • [PATCH 17/20] pxa3xx_nand: add cmdline part parser support   Haojian Zhuang
      • [PATCH 17/20] pxa3xx_nand: add cmdline part parser support   David Woodhouse
      • [PATCH 17/20] pxa3xx_nand: add cmdline part parser support   Daniel Mack
      • [PATCH 17/20] pxa3xx_nand: add cmdline part parser support   Haojian Zhuang
      • [PATCH 17/20] pxa3xx_nand: add cmdline part parser support   Marc Kleine-Budde
      • [PATCH 17/20] pxa3xx_nand: add cmdline part parser support   Haojian Zhuang
• [PATCH 18/20] [ARM] mmp: refresh nand timing   Haojian Zhuang
• [PATCH 19/20] pxa3xx_nand: reimplment read oob command to increase performance   Haojian Zhuang
• [PATCH 20/20] pxa3xx_nand: fix power management support   Haojian Zhuang
• [PATCH 5/6] arm/mx25: add watchdog device   Juergen Beisert
• cortex-m3 booting failure   RK Raggit
  • cortex-m3 booting failure   Catalin Marinas
    • cortex-m3 booting failure   RK Raggit
    • cortex-m3 booting failure   RK Raggit
• Can't boot when THUMB-2 mode at 2.6.32.12   Kyungmin Park
  • Can't boot when THUMB-2 mode at 2.6.32.12   Catalin Marinas
• [PATCH 0/3] Driver for the i.MX2x CMOS Sensor Interface   Baruch Siach
  • [PATCH 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Baruch Siach
    • [PATCH 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Guennadi Liakhovetski
      • [PATCH 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Baruch Siach
      • [PATCH 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Sascha Hauer
      • [PATCH 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Baruch Siach
      • [PATCH 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Sascha Hauer
    • [PATCH 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Sascha Hauer
  • [PATCH 2/3] mx27: add support for the CSI device   Baruch Siach
    • [PATCH 2/3] mx27: add support for the CSI device   Sascha Hauer
  • [PATCH 3/3] mx25: add support for the CSI device   Baruch Siach
    • [PATCH 3/3] mx25: add support for the CSI device   Guennadi Liakhovetski
  • [PATCH 0/3] Driver for the i.MX2x CMOS Sensor Interface   Sascha Hauer
    • [PATCH 0/3] Driver for the i.MX2x CMOS Sensor Interface   Baruch Siach
      • [PATCH 0/3] Driver for the i.MX2x CMOS Sensor Interface   Guennadi Liakhovetski
      • [PATCH 0/3] Driver for the i.MX2x CMOS Sensor Interface   Sascha Hauer
• arm926_dma_flush_range undefined!   Nicolas Ferre
  • arm926_dma_flush_range undefined!   Catalin Marinas
    • arm926_dma_flush_range undefined!   Russell King - ARM Linux
      • arm926_dma_flush_range undefined!   Nicolas Ferre
      • arm926_dma_flush_range undefined!   Russell King - ARM Linux
      • arm926_dma_flush_range undefined!   Nicolas Ferre
      • arm926_dma_flush_range undefined!   Russell King - ARM Linux
      • [PATCH] MMC: at91_mci: modify cache flush routines   Nicolas Ferre
      • [PATCH] MMC: at91_mci: modify cache flush routines   Andrew Morton
      • [PATCH] MMC: at91_mci: modify cache flush routines   Russell King - ARM Linux
      • [PATCH] MMC: at91_mci: modify cache flush routines   Nicolas Ferre
      • arm926_dma_flush_range undefined!   Catalin Marinas
      • arm926_dma_flush_range undefined!   Russell King - ARM Linux
      • arm926_dma_flush_range undefined!   Catalin Marinas
      • arm926_dma_flush_range undefined!   Wolfgang Mües
• [PATCH] dove: support v7 mode   Saeed Bishara
  • [PATCH] [ARM] Dove: platform device registration for the sdio interfaces   Saeed Bishara
    • [PATCH] [ARM] Dove: platform device registration for the sdio interfaces   Eric Miao
  • [PATCH] dove: support v7 mode   Eric Miao
    • [PATCH] dove: support v7 mode   saeed bishara
      • [PATCH] dove: support v7 mode   Eric Miao
• [PATCH 3/8] Add RTC platform device for Acer n30 / Acer n35   Pinkava J.
  • [PATCH 4/8] Add support for LEDs on Acer n35   Pinkava J.
    • [PATCH 5/8] Enable wake-up by Power button on Acer n35   Pinkava J.
      • [PATCH 6/8] Add support for MMC card reader on Acer n30 / Acer n35   Pinkava J.
      • [PATCH 7/8] Add support for power on/off on Acer n30 / Acer n35 MMC card reader   Pinkava J.
      • [PATCH 8/8] Add support for backlight regulation on Acer n35   Pinkava J.
      • Acer n35 patches   Pinkava J.
      • Acer n35 patches   Ben Dooks
      • Acer n35 patches   Pinkava J.
      • [PATCH 8/8] Add support for backlight regulation on Acer n35   Ben Dooks
      • [PATCH 8/8] Add support for backlight regulation on Acer n35   Pinkava J.
• [PATCH 1/6] U6/U6715 ARM architecture files   Pavel Machek
• [PATCH] ARM: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds   Catalin Marinas
• [PATCH] ARM: Declare __copy_to_user_std as a function using ENDPROC   Catalin Marinas
  • [PATCH] ARM: Declare __copy_to_user_std as a function using ENDPROC   Nicolas Pitre
    • [PATCH] ARM: Declare __copy_to_user_std as a function using ENDPROC   Kyungmin Park
• [PATCH] [ARM] Do not call flush_cache_user_range with mmap_semheld   Catalin Marinas
  • [PATCH] [ARM] Do not call flush_cache_user_range with mmap_semheld   Jamie Lokier
    • [PATCH] [ARM] Do not call flush_cache_user_range with mmap_semheld   Jamie Lokier
      • [PATCH] [ARM] Do not call flush_cache_user_range with mmap_semheld   Catalin Marinas
    • [PATCH] [ARM] Do not call flush_cache_user_range with mmap_semheld   Catalin Marinas
• [PATCH] [ARM] Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH 6/6] ARM: oprofile: convert from sysdev to platform device   Aaro Koskinen
  • [PATCH 6/6] ARM: oprofile: convert from sysdev to platform device   Will Deacon
• [PATCH 2/2] Remove now-defunct ts7250 nand driver   H Hartley Sweeten
  • [PATCH 2/2] Remove now-defunct ts7250 nand driver   Artem Bityutskiy
    • [PATCH 2/2] Remove now-defunct ts7250 nand driver   H Hartley Sweeten
• [PATCH] arm: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO   H Hartley Sweeten
  • [PATCH] arm: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO   Russell King - ARM Linux
    • [PATCH] arm: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO   H Hartley Sweeten
      • [PATCH] arm: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO   H Hartley Sweeten
      • [PATCH] arm: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO   Russell King - ARM Linux
      • [PATCH] arm: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO   Russell King - ARM Linux
      • [PATCH] arm: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO   H Hartley Sweeten
      • [PATCH] arm: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO   H Hartley Sweeten
      • [PATCH] arm: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO   Russell King - ARM Linux
• [PATCH] mach-ep93xx: checkpatch.pl cleanup   H Hartley Sweeten
  • [PATCH] mach-ep93xx: checkpatch.pl cleanup   Ryan Mallon
    • [PATCH] mach-ep93xx: checkpatch.pl cleanup   H Hartley Sweeten
• [PATCH 00/34] davinci updates for 2.6.35   Kevin Hilman
  • [PATCH 01/34] davinci: misc cleanups from sparse   Kevin Hilman
  • [PATCH 02/34] davinci: sparse: gpio: void casting   Kevin Hilman
  • [PATCH 03/34] davinci: da830/omap-l137 evm: add support for GPIO based MMC/SD card detection   Kevin Hilman
  • [PATCH 04/34] davinci: da830/omap-l137 evm: use 8-wire MMC/SD card support   Kevin Hilman
  • [PATCH 05/34] davinci: edma: clear interrupt status for interrupt enabled channels only   Kevin Hilman
  • [PATCH 06/34] RTC: DaVinci RTC driver   Kevin Hilman
    • [PATCH 06/34] RTC: DaVinci RTC driver   Russell King - ARM Linux
      • [PATCH 06/34] RTC: DaVinci RTC driver   Kevin Hilman
  • [PATCH 07/34] rtc: omap: let device wakeup capability be configured from chip init logic   Kevin Hilman
    • [PATCH 07/34] rtc: omap: let device wakeup capability be configured from chip init logic   Russell King - ARM Linux
  • [PATCH 08/34] Davinci: allow SOCs based on other ARM CPUs   Kevin Hilman
  • [PATCH 09/34] Davinci: enable timer clock before use   Kevin Hilman
  • [PATCH 10/34] Davinci: cpintc host map configuration   Kevin Hilman
  • [PATCH 11/34] Davinci: support LPSC SwRstDisable state   Kevin Hilman
  • [PATCH 12/34] Davinci: promote da8xx_pinmux_setup()   Kevin Hilman
  • [PATCH 13/34] Davinci: tnetv107x pin list   Kevin Hilman
  • [PATCH 14/34] Davinci: tnetv107x LPSC modules   Kevin Hilman
  • [PATCH 15/34] Davinci: tnetv107x IRQ definitions   Kevin Hilman
  • [PATCH 16/34] Davinci: tnetv107x cpu types   Kevin Hilman
  • [PATCH 17/34] DaVinci: move AEMIF #define's to the proper headers   Kevin Hilman
  • [PATCH 18/34] DA830 EVM: use DA8XX_AEMIF_*_BASE #define's   Kevin Hilman
  • [PATCH 19/34] davinci: DM365: Allow use of GPIO64_57   Kevin Hilman
  • [PATCH 20/34] Davinci: configurable pll divider mask   Kevin Hilman
  • [PATCH 21/34] davinci: mach/common.h: add missing includes   Kevin Hilman
  • [PATCH 22/34] DaVinci: move IDE platform device to its proper place   Kevin Hilman
  • [PATCH 23/34] Davinci: gpio - minor cleanup   Kevin Hilman
  • [PATCH 24/34] Davinci: gpio - structs and functions renamed   Kevin Hilman
  • [PATCH 25/34] Davinci: gpio - register layout invariant inlines   Kevin Hilman
  • [PATCH 26/34] Davinci: gpio - controller type support   Kevin Hilman
  • [PATCH 27/34] Davinci: gpio - fine grained locking   Kevin Hilman
  • [PATCH 28/34] Davinci: eliminate pinmux offset verbosity   Kevin Hilman
  • [PATCH 29/34] Davinci: watchdog reset separation across socs   Kevin Hilman
  • [PATCH 30/34] Davinci: serial - remove unnecessary define   Kevin Hilman
  • [PATCH 31/34] Davinci: serial - use ioremap()   Kevin Hilman
  • [PATCH 32/34] Davinci: serial - conditional reset via pwremu   Kevin Hilman
  • [PATCH 33/34] davinci: edma: use a more intuitive name for edma_info   Kevin Hilman
  • [PATCH 34/34] davinci: edma: fix coding style issue related to usage of braces   Kevin Hilman
• next-samsung: acer n30/n35 updates   Ben Dooks
  • next-samsung: acer n30/n35 updates   Pinkava J.
    • next-samsung: acer n30/n35 updates   Ben Dooks
      • next-samsung: acer n30/n35 updates   Pinkava J.
      • next-samsung: acer n30/n35 updates   Ben Dooks
• [PATCH 1/2] ARM TWD: move TWD registers to common header   srinidhi kasagar
  • [PATCH 1/2] ARM TWD: move TWD registers to common header   srinidhi
• [PATCH 2/2] ARM mpcore_wdt: fix build failure and other fixes   srinidhi kasagar
  • [PATCH 2/2] ARM mpcore_wdt: fix build failure and other fixes   srinidhi
• [PATCH 1/2] DMA ENGINE: Do not reset 'private' of channel   Jassi Brar
• [PATCH 2/2] DMA: PL330: Add async dma api driver   Jassi Brar
  • [PATCH 2/2] DMA: PL330: Add async dma api driver   Linus Walleij
    • [PATCH 2/2] DMA: PL330: Add async dma api driver   jassi brar
• [PATCH] SPI: add support for the PL023 derivate   Linus Walleij
  • [PATCH] SPI: add support for the PL023 derivate   Grant Likely
• [PATCH 3/5] gic: Add set_type callback   Linus Walleij
• MSM PMU Support in Commit ee3c454b   Will Deacon
  • MSM PMU Support in Commit ee3c454b   Daniel Walker
    • MSM PMU Support in Commit ee3c454b   Russell King - ARM Linux
    • MSM PMU Support in Commit ee3c454b   Will Deacon
      • MSM PMU Support in Commit ee3c454b   Russell King - ARM Linux
  • MSM PMU Support in Commit ee3c454b   Russell King - ARM Linux
    • MSM PMU Support in Commit ee3c454b   Daniel Walker
      • MSM PMU Support in Commit ee3c454b   Russell King - ARM Linux
      • MSM PMU Support in Commit ee3c454b   Daniel Walker
      • MSM PMU Support in Commit ee3c454b   Russell King - ARM Linux
      • MSM PMU Support in Commit ee3c454b   Daniel Walker
    • MSM PMU Support in Commit ee3c454b   Will Deacon
• [PATCH] ARM: MSM: register ARM11 PMU IRQ using platform device   Will Deacon
• [FOR RMK] PL330: Add common core driver   Linus Walleij
  • [FOR RMK] PL330: Add common core driver   jassi brar
• [PATCH 2/2] [RFCv3] arm: add half-word __xchg   Mathieu Desnoyers
• [PATCH] ARM: fix inbalance of hardirqs trace before return to user or exception   tom.leiming at gmail.com
  • [PATCH] ARM: fix inbalance of hardirqs trace before return to user or exception   Russell King - ARM Linux
    • [PATCH] ARM: fix inbalance of hardirqs trace before return to user or exception   Ming Lei
• about ALC203 linux driver   Wan ZongShun
  • [alsa-devel] about ALC203 linux driver   Mark Brown
    • [alsa-devel] about ALC203 linux driver   Wan ZongShun
      • [alsa-devel] about ALC203 linux driver   Mark Brown
      • [alsa-devel] about ALC203 linux driver   Vincent Wan
      • [alsa-devel] about ALC203 linux driver   Ben Dooks
• [PATCH 1/1] mfd: delay to mask tsc irq in max8925   Samuel Ortiz
• asmlinkage   Alexander (Sasha) Sirotkin
  • asmlinkage   Russell King - ARM Linux
• OTG implementation with external transceiver on PXA270   Sergey Lapin
  • OTG implementation with external transceiver on PXA270   Eric Miao
    • OTG implementation with external transceiver on PXA270   Robert Jarzmik
      • OTG implementation with external transceiver on PXA270   Mark Brown
• [PATCH] PXA DMA-capable PATA driver   Marek Vasut
  • [PATCH] PXA DMA-capable PATA driver   Marek Vasut
    • [PATCH] PXA DMA-capable PATA driver   Jeff Garzik
  • [PATCH] PXA DMA-capable PATA driver   Jeff Garzik
    • [PATCH] PXA DMA-capable PATA driver   Marek Vasut
      • [PATCH] PXA DMA-capable PATA driver   Robert Jarzmik
      • [PATCH] PXA DMA-capable PATA driver   Marek Vasut
      • [PATCH] PXA DMA-capable PATA driver   Robert Jarzmik
    • [PATCH] PXA DMA-capable PATA driver   Marek Vasut
      • [PATCH] PXA DMA-capable PATA driver   Tejun Heo
      • [PATCH] PXA DMA-capable PATA driver   Marek Vasut
• [PATCH] pxa/vpac270: Convert to use PATA PXA driver   Marek Vasut
• [PATCH] omap iommu: renamed omap3-iommu to omap-iommu   Hiroshi DOYU
  • [PATCH] omap iommu: support for OMAP4   Hiroshi DOYU
  • [PATCH] omap iommu: renamed omap3-iommu to omap-iommu   Felipe Contreras
    • [PATCH] omap iommu: renamed omap3-iommu to omap-iommu   Russell King - ARM Linux
• [PATCH] omap iommu: missing check for TLB valid entry   Hiroshi DOYU
• [PATCH] omap iommu: add TLB preservation support   Hiroshi DOYU
• [PATCH] omap iommu: Introduce iteration macro for iotlb entry scan   Hiroshi DOYU
• [PATCH] omap iommu: Make CONFIG_OMAP_IOMMU_DEBUG selectable   Hiroshi DOYU
• [PATCH] omap iommu: Insert a gap page between IOVMAs against override   Hiroshi DOYU
• [PATCH] omap iommu: Exit iteration if no possibility of available area   Hiroshi DOYU
• [PATCH] omap iommu: Reject unaligned addresses at setting page table entry   Hiroshi DOYU
• [PATCH 1/4] omap: mailbox: convert rwlocks to spinlock   Hiroshi DOYU
  • [PATCH 4/4] omap: mailbox: convert block api to kfifo   Hiroshi DOYU
  • [PATCH 1/4] omap: mailbox: convert rwlocks to spinlock   Felipe Contreras
    • [PATCH 1/4] omap: mailbox: convert rwlocks to spinlock   Hiroshi DOYU
      • [PATCH 1/4] omap: mailbox: convert rwlocks to spinlock   Hiroshi DOYU
• [PATCH 2/4] omap: mailbox cleanup: split MODULE_AUTHOR line   Hiroshi DOYU
• [PATCH 3/4] omap: mailbox: remove (un)likely macros from cold paths   Hiroshi DOYU
• [PATCHv4 0/4] Introduce the /proc/socinfo and use it to export OMAP data   Eduardo Valentin
  • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Eduardo Valentin
  • [PATCHv4 2/4] mach-omap2: export omap2 info under /proc/socinfo   Eduardo Valentin
    • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Paul Mundt
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Eduardo Valentin
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Paul Mundt
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Eduardo Valentin
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Paul Mundt
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Russell King - ARM Linux
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Felipe Balbi
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Eduardo Valentin
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Felipe Balbi
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Eduardo Valentin
      • [PATCHv4 1/4] procfs: Introduce socinfo under /proc   Paul Mundt
  • [PATCHv4 3/4] mach-omap1: export omap1 info under /proc/socinfo   Eduardo Valentin
    • [PATCHv4 3/4] mach-omap1: export omap1 info under /proc/socinfo   Russell King - ARM Linux
      • [PATCHv4 3/4] mach-omap1: export omap1 info under /proc/socinfo   Eduardo Valentin
  • [PATCHv4 4/4] OMAP3: export chip IDCODE, Production ID and Die ID   Eduardo Valentin
• ARM A9 MPCore support in OProfile ?   Aneesh Bhasin
  • ARM A9 MPCore support in OProfile ?   Catalin Marinas
    • ARM A9 MPCore support in OProfile ?   Will Deacon
      • ARM A9 MPCore support in OProfile ?   Aneesh Bhasin
• [PATCH] AT91: PM: dual ram controller support   Nicolas Ferre
• [PATCH] Handle instruction cache maintenance fault properly   Kirill A. Shutemov
  • [PATCH] Handle instruction cache maintenance fault properly   Russell King - ARM Linux
    • [PATCH] Handle instruction cache maintenance fault properly   Kirill A. Shutemov
      • [PATCH] Handle instruction cache maintenance fault properly   Valdis.Kletnieks at vt.edu
      • [PATCH] Handle instruction cache maintenance fault properly   Catalin Marinas
• [PATCH] update omap3 features bitmap and API to generic names   Venkatraman S
• [PATCH] update omap3 features bitmap and API to generic names   Venkatraman S
• [PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   tom.leiming at gmail.com
• FW: [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Peter Pearse
  • FW: [PATCH 0/7] DMAENGINE: fixes and PrimeCells   Russell King - ARM Linux
• Suspicious compilation warning   Mel Gorman
• [PATCH/RFC v2 0/3] [ARM] Add Samsung S5P camera interface driver   Sylwester Nawrocki
  • [PATCH v2 1/3] ARM: Samsung S5P: Add FIMC driver register definition and platform helpers   Sylwester Nawrocki
  • [PATCH v2 2/3] ARM: S5PC100: Add FIMC driver platform helpers   Sylwester Nawrocki
  • [PATCH v2 3/3] ARM: Samsung S5P: Add Camera Interface (video postprocessor) driver   Sylwester Nawrocki
• [PATCHv2 2.6.34-rc7 1/3] mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core   Dinh Nguyen
  • [PATCHv2 2.6.34-rc7 1/3] mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core   Guennadi Liakhovetski
• [PATCHv2 2.6.34-rc7 2/3] mx5: change usb clock source from pll3 to pll2   Dinh Nguyen
  • [PATCHv2 2.6.34-rc7 3/3] mx5: enable usb gadget for freescale mx51 babbage board   Dinh Nguyen
  • [PATCHv2 2.6.34-rc7 2/3] mx5: change usb clock source from pll3 to pll2   Greg KH
    • [PATCHv2 2.6.34-rc7 2/3] mx5: change usb clock source from pll3 to pll2   Nguyen Dinh-R00091
• [PATCH] AT91: add new at91 chips in at91sam9g45 family   Nicolas Ferre
• [PATCH 0/3] mx31moboard OTG host support   Philippe Rétornaz
  • [PATCH 1/3] mx31moboard: Fix usb PHY reset   Philippe Rétornaz
    • [PATCH 1/3] mx31moboard: Fix usb PHY reset   Valentin Longchamp
      • [PATCH 1/3] mx31moboard: Fix usb PHY reset   s.hauer at pengutronix.de
• [PATCH 2/3] mx31moboard: Move usb OTG device registration   Philippe Rétornaz
  • [PATCH 2/3] mx31moboard: Move usb OTG device registration   Valentin Longchamp
• [PATCH 3/3] mx31moboard: OTG host support for smartbot board   Philippe Rétornaz
  • [PATCH 3/3] mx31moboard: OTG host support for smartbot board   Valentin Longchamp
• [PATCH 0/1] mx31: Fix usb otg host initialisation   Philippe Rétornaz
  • [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation   Philippe Rétornaz
    • [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation   Daniel Mack
      • [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation   Philippe Rétornaz
    • [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation   Nguyen Dinh-R00091
      • [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation   Valentin Longchamp
      • [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation   Philippe Rétornaz
    • [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation   Sascha Hauer
      • [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation   Valentin Longchamp
      • [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation   Philippe Rétornaz
• [PATCHv3 2.6.34-rc7 1/3] mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core   Dinh Nguyen
• [PATCHv3 2.6.34-rc7 2/3] mx5: change usb clock source from pll3 to pll2   Dinh Nguyen
  • [PATCHv3 2.6.34-rc7 3/3] mx5: enable usb gadget for freescale mx51 babbage board   Dinh Nguyen
• [PATCH RESEND] update omap3 features bitmap and API to generic names   Venkatraman S
  • [PATCH RESEND] update omap3 features bitmap and API to generic names   Nishanth Menon
    • [PATCH RESEND] update omap3 features bitmap and API to generic names   S, Venkatraman
• [PATCH 0/4] ARM: Gemini: board/maintainer updates   Hans Ulli Kroll
  • [PATCH 1/4] ARM: Gemini: add support for Wiligear WBD-111   Hans Ulli Kroll
    • [PATCH 1/4] ARM: Gemini: add support for Wiligear WBD-111   Imre Kaloz
  • [PATCH 2/4] ARM: Gemini: add support for Wiliboard WBD-222   Hans Ulli Kroll
    • [PATCH 2/4] ARM: Gemini: add support for Wiliboard WBD-222   Imre Kaloz
  • [PATCH 3/4] ARM: Gemini: add support for Raidsonic IB4220   Hans Ulli Kroll
    • [PATCH 3/4] ARM: Gemini: add support for Raidsonic IB4220   Janos Laube
  • [PATCH 4/4] MAINTAINERS: update for ARM/Gemini   Hans Ulli Kroll
    • [PATCH 4/4] MAINTAINERS: update for ARM/Gemini   Paulius Zaleckas
• [PATCH 0/5] HP iPAQ RX1950 patch series   Vasily Khoruzhick
  • [PATCH 1/5] Add HP iPAQ RX1950 machine support   Vasily Khoruzhick
    • [PATCH 1/5] Add HP iPAQ RX1950 machine support   Ben Dooks
      • [PATCH 1/5] Add HP iPAQ RX1950 machine support   Vasily Khoruzhick
      • [PATCH 1/5] Add HP iPAQ RX1950 machine support   Ben Dooks
      • [PATCH 1/5] Add HP iPAQ RX1950 machine support   Vasily Khoruzhick
  • [PATCH 2/5] MAINTAINERS: Add entry for HP iPAQ rx1950   Vasily Khoruzhick
  • [PATCH 3/5] Locate kernel at 0x30108000 if PM_H1940 is enabled   Vasily Khoruzhick
  • [PATCH 4/5] Add suspend/resume support for RX1950   Vasily Khoruzhick
  • [PATCH 5/5] rx1950: configure GPG13-15 as input before suspend   Vasily Khoruzhick
• [RFC] IDLE/DEEP IDLE scheduler modification for power savings   Ben Dooks
• [PATCH 4/4] ARM: S3C6410: Declare IISv4 audio-bus clock   Ben Dooks
• [PATCH] ep93xx: register backlight driver   H Hartley Sweeten
• [PATCH 1/4] pxa/colibri270: Refactor board definition file   Marek Vasut
  • [PATCH 1/4] pxa/colibri270: Refactor board definition file   Daniel Mack
  • [PATCH 1/4] pxa/colibri270: Refactor board definition file   Daniel Mack
    • [PATCH 1/4] pxa/colibri270: Refactor board definition file   Daniel Mack
      • [PATCH 1/4] pxa/colibri270: Refactor board definition file   Eric Miao
• [PATCH 2/4] pxa/colibri270: Add MMC support   Marek Vasut
  • [PATCH 2/4] pxa/colibri270: Add MMC support   Daniel Mack
    • [PATCH 2/4] pxa/colibri270: Add MMC support   Eric Miao
      • [PATCH 2/4] pxa/colibri270: Add MMC support   Daniel Mack
• [PATCH 3/4] pxa/colibri270: Add FFUART MFP   Marek Vasut
• [PATCH 4/4] pxa/colibri270: Add UHC support   Marek Vasut
• [PATCHv2 1/2] ARM: VFP: Fixed suspend and added context save support   ye janboe
  • [PATCHv2 1/2] ARM: VFP: Fixed suspend and added context save support   Tony Lindgren
  • [PATCHv2 1/2] ARM: VFP: Fixed suspend and added context save support   Russell King - ARM Linux
    • [PATCHv2 1/2] ARM: VFP: Fixed suspend and added context save support   ye janboe
      • [PATCHv2 1/2] ARM: VFP: Fixed suspend and added context save support   ye janboe
      • [PATCHv2 1/2] ARM: VFP: Fixed suspend and added context save support   Sripathy, Vishwanath
• [PATCH - kexec] arm: place initrd to safer place according to zImage length   Simon Horman
• [PATCH v2 0/5] HP iPAQ RX1950 patch series   Vasily Khoruzhick
  • [PATCH v2 1/5] Add HP iPAQ RX1950 machine support   Vasily Khoruzhick
  • [PATCH v2 2/5] MAINTAINERS: Add entry for HP iPAQ rx1950   Vasily Khoruzhick
  • [PATCH v2 3/5] Locate kernel at 0x30108000 if PM_H1940 is enabled   Vasily Khoruzhick
  • [PATCH v2 4/5] Add suspend/resume support for RX1950   Vasily Khoruzhick
  • [PATCH v2 5/5] rx1950: configure GPG13-15 as input before suspend   Vasily Khoruzhick
  • [PATCH v2 0/5] HP iPAQ RX1950 patch series   Ben Dooks
    • [PATCH v2 0/5] HP iPAQ RX1950 patch series   Vasily Khoruzhick
• [PATCH 1/2] nomadik hwrng: Add clock support   srinidhi kasagar
  • [PATCH 1/2] nomadik hwrng: Add clock support   Matt Mackall
    • [PATCH 1/2] nomadik hwrng: Add clock support   Alessandro Rubini
      • [PATCH 1/2] nomadik hwrng: Add clock support   Herbert Xu
• [PATCH 2/2] nomadik: Add rng clk to nomadik, RNG support to ux500   srinidhi kasagar
• Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
  • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Jamie Lokier
    • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
  • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
    • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Shilimkar, Santosh
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Jamie Lokier
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Russell King - ARM Linux
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Jamie Lokier
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Russell King - ARM Linux
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   James Bottomley
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   James Bottomley
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   FUJITA Tomonori
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
    • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Jan Kara
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Jan Kara
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
      • Rampant ext3/4 corruption on 2.6.34-rc7 with VIVT ARM (Marvell 88f5182)   Benjamin Herrenschmidt
• [PATCH v2] [RESEND] Handle instruction cache maintenance fault properly   Kirill A. Shutemov
  • [PATCH v2] [RESEND] Handle instruction cache maintenance fault properly   Catalin Marinas
  • [PATCH v2] [RESEND] Handle instruction cache maintenance fault properly   Catalin Marinas
• [PATCH] gic: implement set_type   Rabin Vincent
  • [PATCH] gic: implement set_type   Abhijeet Dharmapurikar
    • [PATCH] gic: implement set_type   Rabin VINCENT
• [PATCH 1/1] silence a bogus sparse warning in unwind.c   Alexander Shishkin
  • [PATCH 1/1] silence a bogus sparse warning in unwind.c   Russell King - ARM Linux
• [PATCH 0/1 v2] mx31: Fix usb otg host initialisation   Philippe Rétornaz
• [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation   Philippe Rétornaz
  • [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation   Greg KH
    • [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation   Philippe Rétornaz
      • [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation   Greg KH
      • [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation   Philippe Rétornaz
      • [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation   Philippe Rétornaz
      • [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation   Greg KH
      • [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation   Philippe Rétornaz
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Eduardo Valentin
  • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Andrew Morton
    • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Eduardo Valentin
    • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Tony Lindgren
• [PATCHv5 1/3] procfs: Introduce socinfo under /proc   Eduardo Valentin
• [PATCHv5 2/3] OMAP: export OMAP info under /proc/socinfo   Eduardo Valentin
  • [PATCHv5 2/3] OMAP: export OMAP info under /proc/socinfo   Nishanth Menon
    • [PATCHv5 2/3] OMAP: export OMAP info under /proc/socinfo   Eduardo Valentin
      • [PATCHv5 2/3] OMAP: export OMAP info under /proc/socinfo   Eduardo Valentin
      • [PATCHv5 2/3] OMAP: export OMAP info under /proc/socinfo   Nishanth Menon
• [PATCHv5 3/3] OMAP3: export chip IDCODE, Production ID and Die ID   Eduardo Valentin
• [PATCH 0/3 v2] mx31moboard: OTG host support   Philippe Rétornaz
  • [PATCH 1/3] mx31moboard: Fix usb PHY reset   Philippe Rétornaz
  • [PATCH 0/3 v2] mx31moboard: OTG host support   Sascha Hauer
• [PATCH 2/3] mx31moboard: Move usb OTG device registration   Philippe Rétornaz
• [PATCH 3/3] mx31moboard: OTG host support for smartbot board   Philippe Rétornaz
• PXA/8250 UART Conflicts   Michael Cashwell
  • PXA/8250 UART Conflicts   Russell King - ARM Linux
    • PXA/8250 UART Conflicts   Dmitry Artamonow
      • PXA/8250 UART Conflicts   Eric Miao
  • PXA/8250 UART Conflicts   Marc Zyngier
    • PXA/8250 UART Conflicts   Michael Cashwell
• [BUG] bug when enabling VM DEBUG   saeed bishara
  • [BUG] bug when enabling VM DEBUG   Robert Hancock
    • [BUG] bug when enabling VM DEBUG   Catalin Marinas
      • [BUG] bug when enabling VM DEBUG   Sebastian Andrzej Siewior
      • [BUG] bug when enabling VM DEBUG   Catalin Marinas
      • [BUG] bug when enabling VM DEBUG   Jamie Lokier
      • [BUG] bug when enabling VM DEBUG   Robert Hancock
      • [BUG] bug when enabling VM DEBUG   Catalin Marinas
      • [BUG] bug when enabling VM DEBUG   Jeff Garzik
• [GIT PULL] pxa: patches for .35 merge window (34-rc7 based)   Eric Miao
  • [GIT PULL] pxa: patches for .35 merge window (34-rc7 based)   Marek Vasut
    • [GIT PULL] pxa: patches for .35 merge window (34-rc7 based)   Eric Miao
• [PATCH 3/4] mx25: fix time accounting   Sascha Hauer
  • [PATCH 3/4] mx25: fix time accounting   Baruch Siach
    • [PATCH 3/4] mx25: fix time accounting   Sascha Hauer
      • [PATCH 3/4] mx25: fix time accounting   Baruch Siach
      • [PATCH 3/4] mx25: fix time accounting   Sascha Hauer
• PATCHv1 0/1 Enable ulpi phy on freescale mx51 babbage hw   Dinh.Nguyen at freescale.com
  • [PATCH 2.6.34-rc7] mx5: bring usb ulpi phy out of reset on freescale mx51 babbage hw   Dinh.Nguyen at freescale.com
• [PATCH] s3c24xx: Fix handling of level irqs for external interrupts.   Lars-Peter Clausen
  • [PATCH] s3c24xx: Fix handling of level irqs for external interrupts.   Ben Dooks
• [PATCH 0/6] OMAP GPIO updates for 2.6.35   Kevin Hilman
  • [PATCH 1/6] OMAP3: GPIO fixes for off-mode   Kevin Hilman
  • [PATCH 2/6] OMAP3: GPIO: Only enable WAKEUPEN for edge detection GPIOs   Kevin Hilman
  • [PATCH 3/6] OMAP2/3: GPIO: generalize prepare for idle   Kevin Hilman
  • [PATCH 4/6] OMAP3: GPIO: disable GPIO debounce clocks on idle   Kevin Hilman
  • [PATCH 5/6] OMAP3: GPIO: Removed a couple of unneeded registers from context save/restore   Kevin Hilman
  • [PATCH 6/6] OMAP: GPIO: remove duplicate debugfs interface   Kevin Hilman
• [PATCH 0/6] OMAP PM core updates for 2.6.35 [updated]   Kevin Hilman
  • [PATCH 1/6] OMAP3: PRCM interrupt: only check and clear enabled PRCM IRQs   Kevin Hilman
  • [PATCH 2/6] OMAP3: PM: Add milliseconds interface to suspend wakeup timer   Kevin Hilman
  • [PATCH 3/6] OMAP3EVM: Update pad configuration for wakeup enabled pads   Kevin Hilman
  • [PATCH 4/6] OMAP3: PM: Enable wakeup from ads7846 touchscreen   Kevin Hilman
  • [PATCH 5/6] OMAP3: PM: Enable IO / IO-CHAIN wakeups for PER   Kevin Hilman
  • [PATCH 6/6] OMAP3: PM: Remove PER wakeup dependency on CORE.   Kevin Hilman
• [PATCH] ARM: SAMSUNG: Remove old email address for ben-linux at fluff.org   Ben Dooks
• [PATCH 1/2] pxa/colibri270: Add TSC support   Marek Vasut
  • [PATCH 2/2] pxa/income: Add Income SBC support   Marek Vasut
    • [PATCH 2/2] pxa/income: Add Income SBC support   Daniel Mack
      • [PATCH 2/2] pxa/income: Add Income SBC support   Marek Vasut
      • [PATCH 2/2] pxa/income: Add Income SBC support   Daniel Mack
• [PATCH 01/15] ARM: S3C: Add S3C2416 detection to uncompress code   Ben Dooks
  • [PATCH 02/15] serial: Use s3c2440 driver for S3C2416 SoC   Ben Dooks
  • [PATCH 10/15] ARM: S3C2416: Add basic clock support   Ben Dooks
  • [PATCH 15/15] ARM: SAMSUNG: Update S3C2416 entry with S3C2450   Ben Dooks
  • [PATCH 01/15] ARM: S3C: Add S3C2416 detection to uncompress code   Ben Dooks
    • [PATCH 01/15] ARM: S3C: Add S3C2416 detection to uncompress code   Yauhen Kharuzhy
• [PATCH 03/15] ARM: S3C2416: Add S3C2416-specific registers definitions   Ben Dooks
• [PATCH 04/15] ARM: SAMSUNG: Move S3C6400 PLL code to <plat/pll.h> for re-use   Ben Dooks
• [PATCH 05/15] ARM: SAMSUNG: Add s3c_disable_clocks() and tidy init+disable usage   Ben Dooks
• [PATCH 06/15] ARM: S3C2416: Add arch support   Ben Dooks
• [PATCH 07/15] ARM: S3C2416: Add initial support of SMDK2416   Ben Dooks
• [PATCH 08/15] ARM: S3C24XX: Identify S3C2416 if S3C2412/S3C2413 built in   Ben Dooks
• [PATCH 09/15] ARM: S3C2443: Move parts of the clock code to common clock file   Ben Dooks
• [PATCH 11/15] ARM: S3C2416: Add support for second HSMMC channel   Ben Dooks
• [PATCH 12/15] ARM: S3C2416: Add support for OHCI on SMDK2416   Ben Dooks
• [PATCH 13/15] ARM: S3C2416: Use s3c2440 style i2c controller   Ben Dooks
• [PATCH 14/15] ARM: S3C2413: Update GPIO pull-up support   Ben Dooks
• [PATCH 4/6] ARM: oprofile: use perf-events framework as backend   Deng-Cheng Zhu
  • [PATCH 4/6] ARM: oprofile: use perf-events framework as backend   Will Deacon
• [PATCH 01/16] ARM: S5PC1xx rename registers to match plat-s5p style   Kukjin Kim
  • [PATCH 01/16] ARM: S5PC1xx rename registers to match plat-s5p style   Marek Szyprowski
• [PATCH 03/16] ARM: Samsung: plat-s5p - enable access to clk_27m clock   Kukjin Kim
  • [PATCH 03/16] ARM: Samsung: plat-s5p - enable access to clk_27m clock   Marek Szyprowski
• [PATCH 04/16] ARM: S5PC100: copy clocks from plat-s5pc1xx   Kukjin Kim
  • [PATCH 04/16] ARM: S5PC100: copy clocks from plat-s5pc1xx   Marek Szyprowski
• [PATCH 05/16] ARM: S5PC100: new clocks definition   Kukjin Kim
  • [PATCH 05/16] ARM: S5PC100: new clocks definition   Marek Szyprowski
    • [PATCH 05/16] ARM: S5PC100: new clocks definition   Kukjin Kim
      • [PATCH 05/16] ARM: S5PC100: new clocks definition   Marek Szyprowski
      • [PATCH 05/16] ARM: S5PC100: new clocks definition   Jassi Brar
      • [PATCH 05/16] ARM: S5PC100: new clocks definition   Ben Dooks
  • [PATCH 05/16] ARM: S5PC100: new clocks definition   Marek Szyprowski
    • [PATCH 05/16] ARM: S5PC100: new clocks definition   Kukjin Kim
• [PATCH] DMA: PL330: Add dma api driver   Jassi Brar
  • [PATCH] DMA: PL330: Add dma api driver   Linus Walleij
    • [PATCH] DMA: PL330: Add dma api driver   Jassi Brar
  • [PATCH] DMA: PL330: Add dma api driver   Dan Williams
    • [PATCH] DMA: PL330: Add dma api driver   Jassi Brar
• [PATCH] sdhci-spear: ST SPEAr based SDHCI controller glue   Viresh KUMAR
  • [PATCH] sdhci-spear: ST SPEAr based SDHCI controller glue   Viresh KUMAR
    • [PATCH] sdhci-spear: ST SPEAr based SDHCI controller glue   Linus Walleij
• [PATCH 06/16] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework   Kukjin Kim
  • [PATCH 06/16] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework   Marek Szyprowski
    • [PATCH 06/16] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework   jassi brar
      • [PATCH 06/16] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework   Marek Szyprowski
      • [PATCH 06/16] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework   jassi brar
• [PATCH 07/16] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100   Kukjin Kim
  • [PATCH 07/16] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
• [PATCH 08/16] ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100   Kukjin Kim
  • [PATCH 08/16] ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
• [PATCH 09/16] ARM: SMDKC100: enable frame buffer again   Kukjin Kim
• [PATCH 10/16] ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100   Kukjin Kim
• [PATCH 11/16] ARM: SMDKC100: enable i2c support again   Kukjin Kim
• [PATCH 12/16] ARM: S5PC100: Move sdhci helpers from plat-s5pc1xx to mach-s5pc100   Kukjin Kim
  • [PATCH 12/16] ARM: S5PC100: Move sdhci helpers from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
• [PATCH 13/16] ARM: SMDKC100: enable sdhci support again   Kukjin Kim
• [PATCH] s3c244x: fix gpiolib port J support   Vasily Khoruzhick
• Unnecessary double check of PIO_ISR in gpio_irq_handler?   dballman
  • Unnecessary double check of PIO_ISR in gpio_irq_handler?   Ryan Mallon
• current next-samsung   Ben Dooks
  • current next-samsung   Russell King - ARM Linux
    • current next-samsung   Ben Dooks
  • current next-samsung   Mike Solovyev
• L2 cache support for pxa16x   Siddarth Gore
  • L2 cache support for pxa16x   Eric Miao
    • L2 cache support for pxa16x   Siddarth Gore
      • L2 cache support for pxa16x   Eric Miao
      • L2 cache support for pxa16x   Siddarth Gore
      • L2 cache support for pxa16x   Eric Miao
      • L2 cache support for pxa16x   Siddarth Gore
      • L2 cache support for pxa16x   Haojian Zhuang
      • L2 cache support for pxa16x   Eric Miao
      • L2 cache support for pxa16x   Haojian Zhuang
      • L2 cache support for pxa16x   Eric Miao
• [PATCH v2] ARM: S5PV210: Add S5PV210 GPIO support.   Kukjin Kim
  • [PATCH v2] ARM: S5PV210: Add S5PV210 GPIO support.   Russell King - ARM Linux
    • [PATCH v2] ARM: S5PV210: Add S5PV210 GPIO support.   Kukjin Kim
  • [PATCH v2] ARM: S5PV210: Add S5PV210 GPIO support.   Ben Dooks
• [PATCH] qnap tsx1x: fix section mismatch   Arnaud Patard (Rtp)
  • [PATCH] qnap tsx1x: fix section mismatch   Martin Michlmayr
• [PATCH] h1940: framebuffer configuration fix   Mike Solovyev
  • [PATCH] h1940: framebuffer configuration fix   Ben Dooks
    • [PATCH] h1940: framebuffer configuration fix   Arnaud Patard (Rtp)
  • [PATCH] h1940: framebuffer configuration fix   Ben Dooks
    • [PATCH] h1940: framebuffer configuration fix   Mike Solovyev
• [PATCH 00/25] *** SUBJECT HERE ***   Daniel Walker
  • [PATCH 00/25] *** SUBJECT HERE ***   Daniel Walker
• [PATCH 01/25] msm: generalization to support multiple SOCs.   Daniel Walker
• [PATCH 02/25] msm: generialize IRQ to support multiple SOCs.   Daniel Walker
• [PATCH 03/25] msm: generialize iomap to support multiple SOCs.   Daniel Walker
• [PATCH 04/25] msm: add sirc interrupt controller driver.   Daniel Walker
• [PATCH 05/25] msm: generalize clock support.   Daniel Walker
  • [PATCH 05/25] msm: generalize clock support.   Pavel Machek
    • [PATCH 05/25] msm: generalize clock support.   dwalker at codeaurora.org
    • [PATCH 05/25] msm: generalize clock support.   David Brown
      • [PATCH 05/25] msm: generalize clock support.   Pavel Machek
      • [PATCH 05/25] msm: generalize clock support.   David Brown
      • [PATCH 05/25] msm: generalize clock support.   Pavel Machek
      • [PATCH 05/25] msm: generalize clock support.   David Brown
      • [PATCH 05/25] msm: generalize clock support.   Jamie Lokier
• [PATCH 06/25] msm: add tlmm support for gpio.   Daniel Walker
• [PATCH 07/25] msm: add Qualcomm 7x30 interrupt controller driver.   Daniel Walker
• [PATCH 08/25] msm: irqs: add irqs-8x50.h for QSD8x50 support   Daniel Walker
• [PATCH 09/25] msm: add msm_iomap-8x50.h for QSD8x50 support   Daniel Walker
• [PATCH 10/25] msm: update basic board layout for QSD8x50   Daniel Walker
• [PATCH 11/25] msm: add devices-qsd8x50.c   Daniel Walker
• [PATCH 12/25] msm: add extern for 8x50 clock list.   Daniel Walker
• [PATCH 13/25] msm: io: add io support for 8x50   Daniel Walker
• [PATCH 14/25] msm: physical offset for QSD8x50   Daniel Walker
• [PATCH 15/25] msm: 8x50 Kconfig changes   Daniel Walker
• [PATCH 16/25] msm: irqs: add irqs-7x30.h for MSM7x30 support   Daniel Walker
• [PATCH 17/25] msm: add msm_iomap-7x30.h for MSM7x30 support   Daniel Walker
• [PATCH 18/25] msm: add devices-msm7x30.c   Daniel Walker
• [PATCH 19/25] msm: update basic board layout for MSM7x30   Daniel Walker
• [PATCH 20/25] msm: dma: add 7x30 security domain abstraction   Daniel Walker
• [PATCH 21/25] msm: Add extern for 7x30 clock list.   Daniel Walker
• [PATCH 22/25] msm: io: add io support for 7x30   Daniel Walker
• [PATCH 23/25] msm: physical offset for MSM7X30   Daniel Walker
• [PATCH 24/25] msm: clock support for the MSM7x30 CPU.   Daniel Walker
• [PATCH 25/25] msm: 7x30 Kconfig and makefile changes   Daniel Walker
• [PATCH 01/11] ARM: S5P6440: Register apll/mpll/epll mout clocks.   Kukjin Kim
• [PATCH 02/11] ARM: S5P6440: Change dout_mpll clock type to clksrc_clk clock type.   Kukjin Kim
• [PATCH 03/11] ARM: S5P6440: Remove usage of clk_arm and add clk_armclk clock   Kukjin Kim
• [PATCH 04/11] ARM: S5P6440: Remove usage of clk_h and add clk_hclk clock   Kukjin Kim
  • [PATCH 04/11] ARM: S5P6440: Remove usage of clk_h and add clk_hclk clock   Ben Dooks
• [PATCH 05/11] ARM: S5P6440: Remove usage of clk_p and add clk_pclk clock   Kukjin Kim
• [PATCH 06/11] ARM: S5P6440: Remove usage of clk_h_low and add clk_hclk_low clock   Kukjin Kim
• [PATCH 07/11] ARM: S5P6440: Remove usage of clk_p_low and add clk_pclk_low clock   Kukjin Kim
• [PATCH 08/11] ARM: S5P6440: Add clocks of type 'struct clk'.   Kukjin Kim
• [PATCH 09/11] ARM: S5P6440: Rename clkset_mmc_spi to clkset_group1   Kukjin Kim
• [PATCH 10/11] ARM: S5P6440: Add clocks of type 'struct clksrc_clk'.   Kukjin Kim
• [PATCH 11/11] ARM: S5P6440: Remove redundant defines   Kukjin Kim
  • [PATCH 11/11] ARM: S5P6440: Remove redundant defines   Jassi Brar
    • [PATCH 11/11] ARM: S5P6440: Remove redundant defines   Ben Dooks
      • [PATCH 11/11] ARM: S5P6440: Remove redundant defines   Kyungmin Park
      • [PATCH 11/11] ARM: S5P6440: Remove redundant defines   Russell King - ARM Linux
      • [PATCH 11/11] ARM: S5P6440: Remove redundant defines   Ben Dooks
      • [PATCH 11/11] ARM: S5P6440: Remove redundant defines   Ben Dooks
• [PATCH v2 06/10] [ARM] tegra: add GPIO support   Ben Dooks
• [PATCH 01/16] ARM: S5PC1xx rename registers to match plat-s5p style   Ben Dooks
• [PATCH 07/16] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100   Ben Dooks
• [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.   Kukjin Kim
  • [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.   Ben Dooks
  • [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.   Marek Szyprowski
    • [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.   Ben Dooks
  • [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.   Marek Szyprowski
• S5PC100 planning   Ben Dooks
  • S5PC100 planning   Kukjin Kim
    • S5PC100 planning   Marek Szyprowski
• [PATCH] ARM: CONFG_FORCE_MAX_ZONEORDER update for SH-Mobile ARM   Magnus Damm
• [PATCH] [RESEND] h1940: framebuffer configuration fix   Mike Solovyev
• approaching last call for updatyes   Ben Dooks
  • approaching last call for updatyes   Vasily Khoruzhick
  • approaching last call for updatyes   christian pellegrin
    • approaching last call for updatyes   Vasily Khoruzhick
    • approaching last call for updatyes   Ben Dooks
• [PATCH 2/6] pxa: append tavorevb3 support   Haojian Zhuang
• [PATCH 1/3] pxa: append tavorevb3 support   Haojian Zhuang
• [PATCH] [ARM] pxa: append tavorevb3 support   Haojian Zhuang
• [PATCH v3 1/2] ARM: S5PV210: Add S5PV210 GPIO support.   Kukjin Kim
  • [PATCH v3 1/2] ARM: S5PV210: Add S5PV210 GPIO support.   Ben Dooks
• [PATCH v3 2/2] ARM: S5PV210: Add Ext interrupt support   Kukjin Kim
  • [PATCH v3 2/2] ARM: S5PV210: Add Ext interrupt support   Ben Dooks
  • [PATCH v3 2/2] ARM: S5PV210: Add Ext interrupt support   Marek Szyprowski
    • [PATCH v3 2/2] ARM: S5PV210: Add Ext interrupt support   Ben Dooks
  • [PATCH v3 2/2] ARM: S5PV210: Add Ext interrupt support   Russell King - ARM Linux
• [RFC PATCH 0/3] ARM: flush_dcache_page/update_mmu_cache reimplementation   Catalin Marinas
  • [RFC PATCH 1/3] ARM: Use lazy cache flushing on ARMv7 SMP systems   Catalin Marinas
    • [RFC PATCH 1/3] ARM: Use lazy cache flushing on ARMv7 SMP systems   Russell King - ARM Linux
      • [RFC PATCH 1/3] ARM: Use lazy cache flushing on ARMv7 SMPsystems   Catalin Marinas
  • [RFC PATCH 2/3] ARM: Assume new page cache pages have dirty D-cache   Catalin Marinas
  • [RFC PATCH 3/3] ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP   Catalin Marinas
  • [RFC PATCH] ARM: Allow lazy cache flushing on ARM11MPCore   Catalin Marinas
    • [RFC PATCH] ARM: Allow lazy cache flushing on ARM11MPCore   Catalin Marinas
• [PATCH 4/6] pxa: enable pmic on tavorevb3   Haojian Zhuang
• [PATCH] [ARM] pxa: enable pmic on tavorevb3   Haojian Zhuang
• [PATCH v2] ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move.   Kukjin Kim
  • [PATCH v2] ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move.   Marek Szyprowski
    • [PATCH v2] ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move.   Kukjin Kim
• [PATCH v2 1/2] nomadik hwrng: Add clock support   srinidhi kasagar
  • [PATCH v2 1/2] nomadik hwrng: Add clock support   Herbert Xu
• [PATCH v2 2/2] ux500: Add hardware rng support   srinidhi kasagar
• [PATCH v2 1/9] ARM: SAMSUNG: Moving ADC device definition to plat-samsung.   Kukjin Kim
  • [PATCH v2 1/9] ARM: SAMSUNG: Moving ADC device definition to plat-samsung.   Ben Dooks
• [PATCH v2 3/9] ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen   Kukjin Kim
  • [PATCH v2 3/9] ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen   Ben Dooks
  • [PATCH v2 3/9] ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen   Arnaud Patard (Rtp)
• [PATCH v2 4/9] Input: s3c24xx_ts - Implements generic GPIO configuration function   Kukjin Kim
  • [PATCH v2 4/9] Input: s3c24xx_ts - Implements generic GPIO configuration function   Ben Dooks
• [PATCH v2 5/9] Input: s3c24xx_ts - Adds TYPE_S3C64XX into Samsung touchscreen driver   Kukjin Kim
• [PATCH v2 6/9] ARM: S3C64XX: Adds Touchscreen support for S3C64XX   Kukjin Kim
• [PATCH v2 7/9] ARM: S5P6440: Adds Touchscreen support for S5P6440   Kukjin Kim
• [PATCH v2 8/9] Input: s3c24xx_ts - Adds TYPE_S5PV210 into Samsung touchscreen driver   Kukjin Kim
  • [PATCH v2 8/9] Input: s3c24xx_ts - Adds TYPE_S5PV210 into Samsung touchscreen driver   Ben Dooks
    • [PATCH v2 8/9] Input: s3c24xx_ts - Adds TYPE_S5PV210 into Samsung touchscreen driver   Kukjin Kim
• [PATCH v2 9/9] ARM: S5PV210: Adds Touchscreen support for S5PV210   Kukjin Kim
• [PATCH v2 2/9] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Kukjin Kim
  • [PATCH v2 2/9] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Sergei Shtylyov
    • [PATCH v2 2/9] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Kukjin Kim
• [PATCH v3 9/9] ARM: S5PV210: Adds Touchscreen support for S5PV210   Kukjin Kim
• Ignore [PATCH v2 2/9] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Kukjin Kim
• Ignore [PATCH v2 2/9] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Kukjin Kim
• [PATCH 2.6.35] ARM: S3C6410: Add missing definitions for the IISv4 clock   Mark Brown
  • [PATCH 2.6.35] ARM: S3C6410: Add missing definitions for the IISv4 clock   Jassi Brar
    • [PATCH 2.6.35] ARM: S3C6410: Add missing definitions for the IISv4 clock   Mark Brown
• [PATCH 00/15] omap: mailbox: reorganize init   Felipe Contreras
  • [PATCH 01/15] omap: mailbox: trivial cleanups   Felipe Contreras
  • [PATCH 02/15] omap: mailbox: reorganize structures   Felipe Contreras
  • [PATCH 03/15] omap: mailbox: 2420 should be detected at run-time   Felipe Contreras
    • [PATCH 03/15] omap: mailbox: 2420 should be detected at run-time   Sergei Shtylyov
      • [PATCH 03/15] omap: mailbox: 2420 should be detected at run-time   Felipe Contreras
  • [PATCH 04/15] omap: mailbox: use correct config for omap1   Felipe Contreras
  • [PATCH 05/15] omap: mailbox: update omap1 probing   Felipe Contreras
  • [PATCH 06/15] omap: mailbox: reorganize registering   Felipe Contreras
  • [PATCH 07/15] omap: mailbox: only compile for configured archs   Felipe Contreras
  • [PATCH 08/15] omap: mailbox: reorganize omap platform_device   Felipe Contreras
  • [PATCH 09/15] omap: mailbox: move more stuff to omap_mbox_init()   Felipe Contreras
  • [PATCH 10/15] omap: mailbox: trivial sync between omap1 and 2   Felipe Contreras
  • [PATCH 11/15] omap: mailbox: split platform driver   Felipe Contreras
  • [PATCH 12/15] omap: mailbox: always built-in platform data   Felipe Contreras
  • [PATCH 13/15] omap: mailbox: reorganize headers   Felipe Contreras
  • [PATCH 14/15] omap: mailbox: don't export unecessary symbols   Felipe Contreras
  • [PATCH 15/15] omap: mailbox: mark some resources as __initdata   Felipe Contreras
  • [PATCH 00/15] omap: mailbox: reorganize init   Hiroshi DOYU
    • [PATCH 00/15] omap: mailbox: reorganize init   Felipe Contreras
• [PATCH 4/20] arch/arm/mach-davinci: Use kzalloc   Julia Lawall
  • [PATCH 4/20] arch/arm/mach-davinci: Use kzalloc   Kevin Hilman
• RMK closing tree to patches *this* weekend   Russell King - ARM Linux
  • RMK closing tree to patches *this* weekend   Ben Dooks
    • RMK closing tree to patches *this* weekend   Russell King - ARM Linux
  • RMK closing tree to patches *this* weekend   Jassi Brar
    • RMK closing tree to patches *this* weekend   Russell King - ARM Linux
      • RMK closing tree to patches *this* weekend   Jassi Brar
  • RMK closing tree to patches *this* weekend   Ming Lei
  • RMK closing tree to patches *this* weekend   Russell King - ARM Linux
  • RMK closing tree to patches *this* weekend   Russell King - ARM Linux
    • RMK closing tree to patches *this* weekend   Nicolas Pitre
      • RMK closing tree to patches *this* weekend   Russell King - ARM Linux
      • RMK closing tree to patches *this* weekend   Russell King - ARM Linux
      • RMK closing tree to patches *this* weekend   Will Deacon
      • RMK closing tree to patches *this* weekend   Russell King - ARM Linux
• [PATCH v3] ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move.   Kukjin Kim
  • [PATCH v3] ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move.   Marek Szyprowski
• [PATCH 1/6] Driver for the watchdog timer on Freescale IMX2 (and later) processors.   Wolfram Sang
  • [PATCH 1/6] Driver for the watchdog timer on Freescale IMX2 (and later) processors.   Wim Van Sebroeck
    • [PATCH 1/6] Driver for the watchdog timer on Freescale IMX2 (and later) processors.   Sascha Hauer
  • [PATCH 1/6] Driver for the watchdog timer on Freescale IMX2 (and later) processors.   Wim Van Sebroeck
    • [PATCH 1/6] Driver for the watchdog timer on Freescale IMX2 (and later) processors.   Wolfram Sang
      • [PATCH 1/6] Driver for the watchdog timer on Freescale IMX2 (and later) processors.   Wim Van Sebroeck
• PIPT cache handling on s5pv210 chip   Kyungmin Park
  • PIPT cache handling on s5pv210 chip   Russell King - ARM Linux
  • PIPT cache handling on s5pv210 chip   Kukjin Kim
    • PIPT cache handling on s5pv210 chip   Russell King - ARM Linux
      • PIPT cache handling on s5pv210 chip   Kukjin Kim
      • PIPT cache handling on s5pv210 chip   Russell King - ARM Linux
      • PIPT cache handling on s5pv210 chip   Ben Dooks
• [PATCH] mtd: pxa3xx_nand: add two chip select   Lei Wen
• [PATCH] mmp: add nand support to mmp2   Lei Wen
• [PATCH] mmp: refresh nand timing   Lei Wen
• [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Haojian Zhuang
  • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Marc Kleine-Budde
  • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Mike Rapoport
    • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Lei Wen
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Mike Rapoport
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Lei Wen
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Marek Vasut
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Lei Wen
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Marek Vasut
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Lei Wen
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Mike Rapoport
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Lei Wen
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Daniel Mack
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Mike Rapoport
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Marek Vasut
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Lei Wen
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Eric Miao
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Lei Wen
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Mike Rapoport
      • [PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform   Lei Wen
• [PATCH 02/20] mtd: pxa3xx_nand: introduce common timing to reduce read id times   Haojian Zhuang
  • [PATCH 02/20] mtd: pxa3xx_nand: introduce common timing to reduce read id times   Mike Rapoport
    • [PATCH 02/20] mtd: pxa3xx_nand: introduce common timing to reduce read id times   Lei Wen
• [PATCH 03/20] mtd: pxa3xx_nand: remove the flash info in driver structure   Haojian Zhuang
  • [PATCH 03/20] mtd: pxa3xx_nand: remove the flash info in driver structure   Mike Rapoport
    • [PATCH 03/20] mtd: pxa3xx_nand: remove the flash info in driver structure   Lei Wen
      • [PATCH 03/20] mtd: pxa3xx_nand: remove the flash info in driver structure   David Woodhouse
• [PATCH 04/20] mtd: pxa3xx_nand: make scan procedure more clear   Haojian Zhuang
  • [PATCH 04/20] mtd: pxa3xx_nand: make scan procedure more clear   Mike Rapoport
    • [PATCH 04/20] mtd: pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH 05/20] mtd: pxa3xx_nand: rework irq logic   Haojian Zhuang
• [PATCH 06/20] mtd: pxa3xx_nand: unify prepare command   Haojian Zhuang
• [PATCH 07/20] mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself   Haojian Zhuang
  • [PATCH 07/20] mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself   Mike Rapoport
    • [PATCH 07/20] mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself   Lei Wen
• [PATCH 08/20] mtd: pxa3xx_nand: remove detect configure function   Haojian Zhuang
• [PATCH 09/20] mtd: pxa3xx_nand: add two chip select   Haojian Zhuang
• [PATCH v2] ARM: Samsung: S5PC100 platform cleanup   Marek Szyprowski
  • [PATCH 01/15] ARM: Samsung: fix broken timer irq base   Marek Szyprowski
    • [PATCH 01/15] ARM: Samsung: fix broken timer irq base   Kukjin Kim
    • [PATCH 01/15] ARM: Samsung: fix broken timer irq base   Ben Dooks
  • [PATCH 02/15] ARM: Samsung: move common I2C0 device helpers to machine directories   Marek Szyprowski
    • [PATCH 02/15] ARM: Samsung: move common I2C0 device helpers to machine directories   Kukjin Kim
  • [PATCH 03/15] ARM: Samsung: move driver strength gpio configuration helper to common dir   Marek Szyprowski
  • [PATCH 04/15] drivers: serial: S5PC100 serial driver cleanup   Marek Szyprowski
    • [PATCH 04/15] drivers: serial: S5PC100 serial driver cleanup   Kukjin Kim
  • [PATCH 05/15] ARM: S5PC100: Use common functions for gpiolib implementation   Marek Szyprowski
    • [PATCH 05/15] ARM: S5PC100: Use common functions for gpiolib implementation   Kukjin Kim
      • [PATCH 05/15] ARM: S5PC100: Use common functions for gpiolib implementation   Maurus Cuelenaere
  • [PATCH 06/15] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
    • [PATCH 06/15] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100   Kukjin Kim
      • [PATCH 06/15] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
  • [PATCH 07/15] ARM: S5PC100: rename gpio registers from s5pc1xx to s5pc100   Marek Szyprowski
    • [PATCH 07/15] ARM: S5PC100: rename gpio registers from s5pc1xx to s5pc100   Kukjin Kim
  • [PATCH 08/15] ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
    • [PATCH 08/15] ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100   Kukjin Kim
  • [PATCH 09/15] ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
    • [PATCH 09/15] ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100   Kukjin Kim
  • [PATCH 10/15] ARM: S5PC100: Move sdhci helpers from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
    • [PATCH 10/15] ARM: S5PC100: Move sdhci helpers from plat-s5pc1xx to mach-s5pc100   Kukjin Kim
  • [PATCH 11/15] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework   Marek Szyprowski
  • [PATCH 12/15] ARM: SMDKC100: fix frame buffer definitions   Marek Szyprowski
    • [PATCH 12/15] ARM: SMDKC100: fix frame buffer definitions   Kukjin Kim
  • [PATCH 13/15] ARM: Samsung: Move external interrupts support from plat-s5pc1xx to plat-s5p   Marek Szyprowski
    • [PATCH 13/15] ARM: Samsung: Move external interrupts support from plat-s5pc1xx to plat-s5p   Kukjin Kim
  • [PATCH 14/15] ARM: S5PC100: Add support for gpio interrupt   Marek Szyprowski
  • [PATCH 15/15] ARM: remove obsolete plat-s5pc1xx directory   Marek Szyprowski
• [PATCH 10/20] mtd: pxa3xx_nand: add bch ecc support   Haojian Zhuang
• [PATCH 11/20] mtd: pxa3xx_nand: add debug messege   Haojian Zhuang
  • [PATCH 11/20] mtd: pxa3xx_nand: add debug messege   Marc Kleine-Budde
    • [PATCH 11/20] mtd: pxa3xx_nand: add debug messege   David Woodhouse
• [PATCH 12/20] mtd: pxa3xx_nand: enable 4k page operation   Haojian Zhuang
• [PATCH 13/20] mtd: pxa3xx_nand: show the real time used by the controller   Haojian Zhuang
• [PATCH 14/20] mtd: pxa3xx_nand: add polling mode support   Haojian Zhuang
• [PATCH 15/20] mmp: add nand support to mmp2   Haojian Zhuang
• [PATCH 16/20] mtd: pxa3xx_nand: fix reset timeout on mmp2   Haojian Zhuang
• [PATCH 17/20] mtd: pxa3xx_nand: add cmdline part parser support   Haojian Zhuang
  • [PATCH 17/20] mtd: pxa3xx_nand: add cmdline part parser support   Marc Kleine-Budde
• [PATCH 18/20] mmp: refresh nand timing   Haojian Zhuang
• [PATCH 19/20] mtd: pxa3xx_nand: reimplment read oob command to increase performance   Haojian Zhuang
• [PATCH 20/20] mtd: pxa3xx_nand: fix power management support   Haojian Zhuang
• Should we pass amba device peripheral id with device structure or not?   Viresh KUMAR
  • Should we pass amba device peripheral id with device structure or not?   Catalin Marinas
  • Should we pass amba device peripheral id with device structure or not?   Russell King - ARM Linux
    • Should we pass amba device peripheral id with device structure or not?   Viresh KUMAR
      • Should we pass amba device peripheral id with device structure or not?   Russell King - ARM Linux
      • Should we pass amba device peripheral id with device structure or not?   Linus Walleij
      • Should we pass amba device peripheral id with device structure or not?   Russell King - ARM Linux
      • Should we pass amba device peripheral id with device structure or not?   Viresh KUMAR
      • Should we pass amba device peripheral id with device structure or not?   Linus Walleij
  • Should we pass amba device peripheral id with device structure or not?   Linus Walleij
    • Should we pass amba device peripheral id with device structure or not?   Viresh KUMAR
• [PATCH v2 10/11] ARM: SAMSUNG: Remove the TYPE and replace it with a Feature   Kukjin Kim
  • [PATCH v2 10/11] ARM: SAMSUNG: Remove the TYPE and replace it with a Feature   Ben Dooks
• [PATCH v2 11/11] Input: s3c24xx_ts - Uses Feature field instead TYPE for Samsung SoCs   Kukjin Kim
  • [PATCH v2 11/11] Input: s3c24xx_ts - Uses Feature field instead TYPE for Samsung SoCs   Kyungmin Park
• [PATCH v4] ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move   Kukjin Kim
  • [PATCH v4] ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move   Marek Szyprowski
• [PATCH v2 10/11] ARM: SAMSUNG: Remove the TYPE and replace it with a Feature   NAVEEN KRISHNA CHATRADHI
• [PATCH v4] ARM: S5PV210: Add Ext interrupt support.   Kukjin Kim
  • [PATCH v4] ARM: S5PV210: Add Ext interrupt support.   Marek Szyprowski
    • [PATCH v4] ARM: S5PV210: Add Ext interrupt support.   Kukjin Kim
• [PATCH] ARM: S5P: Dynamicly numbered GPIO interrupt support   Ben Dooks
  • [PATCH] ARM: S5P: Dynamicly numbered GPIO interrupt support   Marek Szyprowski
    • [PATCH] ARM: S5P: Dynamicly numbered GPIO interrupt support   Ben Dooks
  • [PATCH] ARM: S5P: Dynamicly numbered GPIO interrupt support   Jassi Brar
• [PATCH v2] ARM: S5P: Add System Timer   Kukjin Kim
  • [PATCH v2] ARM: S5P: Add System Timer   Russell King - ARM Linux
  • [PATCH v2] ARM: S5P: Add System Timer   Kukjin Kim
  • [PATCH v2] ARM: S5P: Add System Timer   Lukasz Majewski
• [PATCH v2 10/11] ARM: SAMSUNG: Remove the TYPE and replace it with a Feature   Ben Dooks
• [PATCH v2 10/11] ARM: SAMSUNG: Remove the TYPE and replace it with a Feature   NAVEEN KRISHNA CHATRADHI
• [PATCH 7/8] MXC: mach-mx31_3ds: Add support for the keypad.   Magnus Lilja
  • [PATCH 7/8] MXC: mach-mx31_3ds: Add support for the keypad.   Alberto Panizzo
    • [PATCH 7/8] MXC: mach-mx31_3ds: Add support for the keypad.   Magnus Lilja
  • [PATCH 7/8] MXC: mach-mx31_3ds: Add support for the keypad.   Sascha Hauer
    • [PATCH 7/8] MXC: mach-mx31_3ds: Add support for the keypad.   Alberto Panizzo
• [PATCH] ARM: fix spinlock recursion in adjust_pte()   Mika Westerberg
• Possible memory leak: g_serial/ dma pool allocation in fsl_udc_core.c   Ole Reinhardt
• [PATCH v2 00/17] omap: mailbox: reorganize init   Felipe Contreras
  • [PATCH v2 01/17] omap: mailbox: trivial whitespace cleanups   Felipe Contreras
  • [PATCH v2 02/17] omap: mailbox: trivial cleanups   Felipe Contreras
  • [PATCH v2 03/17] omap: mailbox: reorganize structures   Felipe Contreras
  • [PATCH v2 04/17] omap: mailbox: 2420 should be detected at run-time   Felipe Contreras
  • [PATCH v2 05/17] omap: mailbox: use correct config for omap1   Felipe Contreras
  • [PATCH v2 06/17] omap: mailbox: update omap1 probing   Felipe Contreras
  • [PATCH v2 07/17] omap: mailbox: reorganize registering   Felipe Contreras
  • [PATCH v2 08/17] omap: mailbox: only compile for configured archs   Felipe Contreras
    • [PATCH v2 08/17] omap: mailbox: only compile for configured archs   Kanigeri, Hari
      • [PATCH v2 08/17] omap: mailbox: only compile for configured archs   Felipe Contreras
  • [PATCH v2 09/17] omap: mailbox: reorganize omap platform_device   Felipe Contreras
  • [PATCH v2 10/17] omap: mailbox: move more stuff to omap_mbox_init()   Felipe Contreras
  • [PATCH v2 11/17] omap: mailbox: trivial sync between omap1 and 2   Felipe Contreras
  • [PATCH v2 12/17] omap: mailbox: split platform driver   Felipe Contreras
  • [PATCH v2 13/17] omap: mailbox: always built-in platform data   Felipe Contreras
  • [PATCH v2 14/17] omap: mailbox: reorganize headers   Felipe Contreras
  • [PATCH v2 15/17] omap: mailbox: don't export unecessary symbols   Felipe Contreras
  • [PATCH v2 16/17] omap: mailbox: mark some resources as __initdata   Felipe Contreras
  • [PATCH v2 17/17] omap: mailbox: don't export register/unregister   Felipe Contreras
  • [PATCH v2 00/17] omap: mailbox: reorganize init   Ohad Ben-Cohen
    • [PATCH v2 00/17] omap: mailbox: reorganize init   Felipe Contreras
      • [PATCH v2 00/17] omap: mailbox: reorganize init   Ohad Ben-Cohen
  • [PATCH v2 00/17] omap: mailbox: reorganize init   Hiroshi DOYU
    • [PATCH v2 00/17] omap: mailbox: reorganize init   Felipe Contreras
      • [PATCH v2 00/17] omap: mailbox: reorganize init   Hiroshi DOYU
      • [PATCH v2 00/17] omap: mailbox: reorganize init   Felipe Contreras
      • [PATCH v2 00/17] omap: mailbox: reorganize init   Hiroshi DOYU
      • [PATCH v2 00/17] omap: mailbox: reorganize init   Felipe Contreras
      • [PATCH v2 00/17] omap: mailbox: reorganize init   Tony Lindgren
      • [PATCH v2 00/17] omap: mailbox: reorganize init   Felipe Contreras
• [PATCH] MXC: Add USB OTG (device) for i.MX31 PDK (3DS) board.   Magnus Lilja
  • [PATCH] MXC: Add USB OTG (device) for i.MX31 PDK (3DS) board.   Fabio Estevam
    • [PATCH] MXC: Add USB OTG (device) for i.MX31 PDK (3DS) board.   Magnus Lilja
      • [PATCH] MXC: Add USB OTG (device) for i.MX31 PDK (3DS) board.   Fabio Estevam
      • [PATCH] MXC: Add USB OTG (device) for i.MX31 PDK (3DS) board.   Magnus Lilja
• [PATCH v8 2/2] omap hsmmc: adaptation of sdma descriptor autoloading feature   Venkatraman S
• [PATCH 00/10] omap platform init patches for 2.6.35 merge window   Tony Lindgren
  • [PATCH 01/10] OMAP2/3/4: DMA: disable channel interrupts in omap_init_dma()   Tony Lindgren
  • [PATCH 02/10] omap: DMA: Fix multi-line comments   Tony Lindgren
  • [PATCH 03/10] omap: init the gpio pinmux for mmc   Tony Lindgren
  • [PATCH 04/10] omap: hsmmc: fix the hsmmc driver for am3517   Tony Lindgren
  • [PATCH 05/10] OMAP4: SPI: Fix Driver Kconfig   Tony Lindgren
  • [PATCH 06/10] OMAP4: Ethernet: KS8851 Board Support   Tony Lindgren
  • [PATCH 07/10] OMAP4: Networking: Defconfig Support   Tony Lindgren
  • [PATCH 08/10] omap4: Move SOC specific code from board file   Tony Lindgren
  • [PATCH 09/10] omap: GPIO: Fix OMAP4 GPIO reg access issues   Tony Lindgren
  • [PATCH 10/10] AM3517: rename the i2c boardinfo to make it more readable   Tony Lindgren
• Anyone knows abot the DMA status on the PB1176JZF-S baseboard?   Linus Walleij
  • Anyone knows abot the DMA status on the PB1176JZF-S baseboard?   Colin Tuckley
• [PATCH] mx21/devices: fix USBOTG resource   Wolfram Sang
  • [PATCH] mx21/devices: fix USBOTG resource   Russell King - ARM Linux
    • [PATCH] mx21/devices: fix USBOTG resource   Wolfram Sang
• [PATCH] Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA   Russell King - ARM Linux
  • [PATCH] Optionally allow ARMv6 to use 'normal, bufferable' memoryfor DMA   Catalin Marinas
• [patch 0/6] kirkwood openrd client audio support - v2   apatard at mandriva.com
  • [patch 1/6] orion/kirkwood: add audio functions.   apatard at mandriva.com
    • [patch 1/6] orion/kirkwood: add audio functions.   Mark Brown
  • [patch 3/6] ASoC: Add SOC_DOUBLE_R_SX_TLV control   apatard at mandriva.com
    • [patch 3/6] ASoC: Add SOC_DOUBLE_R_SX_TLV control   Mark Brown
  • [patch 4/6] cs42l51: add asoc driver   apatard at mandriva.com
    • [patch 4/6] cs42l51: add asoc driver   Mark Brown
  • [patch 5/6] orion/kirkwood: Add i2s support   apatard at mandriva.com
    • [patch 5/6] orion/kirkwood: Add i2s support   Mark Brown
    • [alsa-devel] [patch 5/6] orion/kirkwood: Add i2s support   saeed bishara
  • [patch 6/6] kirkwood: Add audio support to openrd client platforms   apatard at mandriva.com
    • [patch 6/6] kirkwood: Add audio support to openrd?client platforms   Alexander Clouter
    • [patch 6/6] kirkwood: Add audio support to openrd client platforms   Mark Brown
• [patch 2/6] openrd-client: initialise audio   apatard at mandriva.com
  • [patch 2/6] openrd-client: initialise audio   Mark Brown
• [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support   Sergei Shtylyov
  • [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support   Sergei Shtylyov
• [PATCH v6 2/3] DA8xx: CPPI 4.1 platform code   Sergei Shtylyov
• [PATCH 04/25] pxa3xx_nand: make scan procedure more clear   Lei Wen
• Patch 6127   Russell King - ARM Linux
• [PATCH] NUC900/audio: Add nuc900 audio support part to arch   Wan ZongShun
• [PATCH] NUC900/audio: add nuc900 audio driver support   Wan ZongShun
  • [PATCH] NUC900/audio: add nuc900 audio driver support   Mark Brown
    • [PATCH] NUC900/audio: add nuc900 audio driver support   Wan ZongShun
      • [PATCH] NUC900/audio: add nuc900 audio driver support   Mark Brown
      • [PATCH] NUC900/audio: add nuc900 audio driver support   Wan ZongShun
      • [PATCH v2] NUC900/audio: add nuc900 audio driver support   Wan ZongShun
      • [PATCH v2] NUC900/audio: add nuc900 audio driver support   Wan ZongShun
• [PATCH] MAINTAINERS: Add Files and directories entry for NUC900 platform   Wan ZongShun
• [PATCH] arm/orion5x: Base support for DNS-323 rev C1   Benjamin Herrenschmidt
• [PATCH] arm/orion5x: Fix soft-reset for some platforms   Benjamin Herrenschmidt
• [PATCH] hwmon: DNS323 rev C1 fan support   Benjamin Herrenschmidt
• [PATCH] phy/marvell: Add special settings for D-Link DNS-323 rev C1   Benjamin Herrenschmidt
  • [PATCH] phy/marvell: Add special settings for D-Link DNS-323 rev C1   Wolfram Sang
    • [PATCH] phy/marvell: Add special settings for D-Link DNS-323 rev C1   Benjamin Herrenschmidt
      • [PATCH] phy/marvell: Add special settings for D-Link DNS-323 rev C1   Benjamin Herrenschmidt
      • [PATCH] phy/marvell: Add special settings for D-Link DNS-323 rev C1   Wolfram Sang
      • [PATCH] phy/marvell: Add special settings for D-Link DNS-323 rev C1   Benjamin Herrenschmidt
• [PATCH 01/18] ARM: S5PV210: Rearrange the system clock definitions   Kukjin Kim
• [PATCH 02/18] ARM: S5PV210: Register apll/mpll/epll clksrc_clk clocks   Kukjin Kim
• [PATCH 03/18] ARM: S5PV210: Rearrange assignment of clock for fout apll/mpll/epll clocks   Kukjin Kim
• [PATCH 04/18] ARM: S5PV210: Add armclk of clksrc_clk clock type   Kukjin Kim
• [PATCH 05/18] ARM: S5PV210: Remove usage of clk_h200 clock and add clk_hclk_msys clock   Kukjin Kim
• [PATCH 06/18] ARM: S5PV210: Remove usage of clk_h166 and add clk_hclk_dsys clock   Kukjin Kim
• [PATCH 07/18] ARM: S5PV210: Remove usage of clk_h133 and add clk_hclk_psys clock   Kukjin Kim
• [PATCH 08/18] ARM: S5PV210: Remove usage of clk_p100 and add clk_pclk_msys clock   Kukjin Kim
• [PATCH 09/18] ARM: S5PV210: Fix clk_get_rate issue with the clk_h100 clock   Kukjin Kim
• [PATCH 10/18] ARM: S5PV210: Remove usage of clk_p83 and add clk_pclk_dsys clock\   Kukjin Kim
• [PATCH 11/18] ARM: S5PV210: Remove usage of clk_p66 and add clk_pclk_psys clock   Kukjin Kim
• [PATCH 12/18] ARM: S5PV210: Add support for VPLL   Kukjin Kim
• [PATCH 13/18] ARM: S5PV210: Add new system clocks   Kukjin Kim
• [PATCH 14/18] ARM: S5PV210: Add sclk_dac, sclk_mixer and sclk_hdmi clocks   Kukjin Kim
• [PATCH 15/18] ARM: S5PV210: Add sclk_audio and sclk_spdif clocks.   Kukjin Kim
• [PATCH 16/18] ARM: S5PV210: Add sclk clocks of type 'struct clksrc_clk' clock   Kukjin Kim
• [PATCH 17/18] ARM: S5PV210: Add 'clock source gate' clock definitions   Kukjin Kim
  • [PATCH 17/18] ARM: S5PV210: Add 'clock source gate' clock definitions   Ben Dooks
• [PATCH 18/18] ARM: S5PV210: Add clocks of type 'struct clk'   Kukjin Kim
• [PATCH v5] ARM: S5PV210: Add Ext interrupt support.   Kukjin Kim
  • [PATCH v5] ARM: S5PV210: Add Ext interrupt support.   Ben Dooks
    • [PATCH v5] ARM: S5PV210: Add Ext interrupt support.   Kyungmin Park
      • [PATCH v5] ARM: S5PV210: Add Ext interrupt support.   Ben Dooks
• [PATCHESv2] S3C: DMA: Support for PL330   Jassi Brar
  • [PATCH 1/6] S3C: DMA: Change argument of s3c2410_dma_devconfig   Jassi Brar
  • [PATCH 2/6] S3C: DMA: Add api driver for PL330   Jassi Brar
    • [PATCH 2/6] S3C: DMA: Add api driver for PL330   Kyungmin Park
      • [PATCH 2/6] S3C: DMA: Add api driver for PL330   Jassi Brar
      • [PATCH 2/6] S3C: DMA: Add api driver for PL330   Ben Dooks
    • [PATCH 2/6] S3C: DMA: Add api driver for PL330   Ben Dooks
      • [PATCH 2/6] S3C: DMA: Add api driver for PL330   Jassi Brar
  • [PATCH 3/6] S5PC100: DMA: Add platform devices for PL330 DMACs   Jassi Brar
  • [PATCH 5/6] S5P6442: DMA: Add platform devices for PL330 DMACs   Jassi Brar
• [PATCH 4/6] S5P6440: DMA: Add platform devices for PL330 DMACs   Jassi Brar
• [PATCH 6/6] S5PV210: DMA: Add platform devices for PL330 DMACs   Jassi Brar
• pull request for s3c24xx gpio and s3c2416   Ben Dooks
  • pull request for s3c24xx gpio and s3c2416   Russell King - ARM Linux
    • pull request for s3c24xx gpio and s3c2416   Ben Dooks
• [PATCH] sdhci-spear: ST SPEAr based SDHCI controller glue   Viresh KUMAR
• [PATCH v3 10/10] Input: s3c24xx_ts - Changes TYPEs for Samsung touchscreen driver   Kukjin Kim
  • [PATCH v3 10/10] Input: s3c24xx_ts - Changes TYPEs for Samsung touchscreen driver   Ben Dooks
• Arm parallel port configuration   sneha prakash
• Common plat-s5p fixes   Marek Szyprowski
  • [PATCH 1/3] ARM: Samsung: fix broken timer irq base   Marek Szyprowski
    • [PATCH 1/3] ARM: Samsung: fix broken timer irq base   Ben Dooks
  • [PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories   Marek Szyprowski
    • [PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories   Kukjin Kim
    • [PATCH 2/3] ARM: Samsung: move common I2C0 device helpers to machine directories   Kukjin Kim
  • [PATCH 3/3] ARM: Samsung: move driver strength gpio configuration helper to common dir   Marek Szyprowski
• [PATCH v2] Add support for Samsung Aquila board (S5PC110 based)   Marek Szyprowski
  • [PATCH 4/7] ARM: S5PV210: add framebuffer platform helpers for s5pv210 based machines   Marek Szyprowski
  • [PATCH 5/7] ARM: S5PV210: add support for s3c-fb driver on Aquila machine   Marek Szyprowski
  • [PATCH 6/7] ARM: S5PV210: add common I2C device helpers   Marek Szyprowski
  • [PATCH 7/7] ARM: S5PV210: add common HSMMC device helpers   Marek Szyprowski
• [PATCH 1/7] ARM: S5PV210: add support for software reset   Marek Szyprowski
  • [PATCH 1/7] ARM: S5PV210: add support for software reset   Kukjin Kim
    • [PATCH 1/7] ARM: S5PV210: add support for software reset   Kyungmin Park
• [PATCH 2/7] ARM: S5PV210: add Aquila board   Marek Szyprowski
  • [PATCH 2/7] ARM: S5PV210: add Aquila board   Ben Dooks
• [PATCH 3/7] ARM: Samsung: move common framebuffer regs to common platform directory   Marek Szyprowski
• [PATCH 1/6] ARM: SAMSUNG: Add spinlock locking to GPIO banks   Ben Dooks
  • [PATCH 4/6] ARM: S3C24XX: Update missed gpio calls to use gpiolib   Ben Dooks
  • [PATCH 5/6] ARM: S3C24XX: Remove macros mapping GPIO number to base   Ben Dooks
  • [PATCH 6/6] ARM: S3C24XX: Add note on GPIO bank sizes   Ben Dooks
• [PATCH 2/6] ARM: S3C244X: fix gpiolib port J support   Ben Dooks
• [PATCH 3/6] ARM: S3C24XX: Start cleanup of GPIO numbering   Ben Dooks
• [PATCH v6] ARM: S5PV210: Add Ext interrupt support.   Kukjin Kim
  • [PATCH v6] ARM: S5PV210: Add Ext interrupt support.   Ben Dooks
  • [PATCH v6] ARM: S5PV210: Add Ext interrupt support.   Marek Szyprowski
  • [PATCH v6] ARM: S5PV210: Add Ext interrupt support.   Marek Szyprowski
    • [PATCH v6] ARM: S5PV210: Add Ext interrupt support.   Ben Dooks
      • [PATCH v6] ARM: S5PV210: Add Ext interrupt support.   Ben Dooks
  • [PATCH v6] ARM: S5PV210: Add Ext interrupt support.   Marek Szyprowski
    • [PATCH v6] ARM: S5PV210: Add Ext interrupt support.   Ben Dooks
• Physical address access / Temporary MMU disable   Hans Hübner
  • Physical address access / Temporary MMU disable   Russell King - ARM Linux
• i.MX EHCI initialization   Sascha Hauer
  • i.MX EHCI initialization   Daniel Mack
    • i.MX EHCI initialization   Sascha Hauer
• [PATCH 5/6] arm/mx25: add watchdog device   Sascha Hauer
  • [PATCH V2 5/6] arm/mx25: add watchdog device   Wolfram Sang
  • [PATCH V2 6/6] arm/mx51: add watchdog device   Wolfram Sang
• [PATCH 2/6] arm/mach-mx2/3: Fix watchdog-devices to match the current driver   Sascha Hauer
• [PATCH 3/6] arm/mach-mx3: add watchdog device to Phytec-boards   Sascha Hauer
• [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   Viresh KUMAR
  • [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   Viresh KUMAR
  • [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   Jassi Brar
    • [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   Viresh KUMAR
      • [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   srinidhi kasagar
      • [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   George G. Davis
      • [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   Viresh KUMAR
      • [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   srinidhi kasagar
      • [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   Shilimkar, Santosh
      • [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   Viresh KUMAR
• [PATCH Resend] Watchdog: Adding support for Watchdog found with ARM CortexA9   Viresh KUMAR
  • [PATCH Resend] Watchdog: Adding support for Watchdog found with ARM CortexA9   Shilimkar, Santosh
    • [PATCH Resend] Watchdog: Adding support for Watchdog found with ARM CortexA9   Viresh KUMAR
      • [PATCH Resend] Watchdog: Adding support for Watchdog found with ARM CortexA9   Shilimkar, Santosh
      • [PATCH Resend] Watchdog: Adding support for Watchdog found with ARM CortexA9   Russell King - ARM Linux
      • [PATCH Resend] Watchdog: Adding support for Watchdog found with ARM CortexA9   Viresh KUMAR
• [PATCH 6/6] ARM: pxa: support more i2c devices on PXA95x   Haojian Zhuang
• [PATCH] ARM: pxa: support more i2c devices on PXA95x   Haojian Zhuang
• [PATCH 1/6] pxa: sanitize IRQ registers access based on offset   Haojian Zhuang
• [PATCH 2/6] pxa: append tavorevb3 support   Haojian Zhuang
• [PATCH 3/6] [ARM] pxa: reserve more irq for board   Haojian Zhuang
  • [PATCH 3/6] [ARM] pxa: reserve more irq for board   Eric Miao
• [PATCH 4/6] [ARM] pxa: enable pmic on tavorevb3   Haojian Zhuang
• [PATCH 5/6] [ARM] pxa: support saarb platform   Haojian Zhuang
• [PATCH 6/6] ARM: pxa: support more i2c devices on PXA95x   Haojian Zhuang
• [PATCH 0/6] pxa95x update   Haojian Zhuang
• [PATCH] serial: SAMSUNG: Fix dev_name and driver_name   Joonyoung Shim
  • [PATCH] serial: SAMSUNG: Fix dev_name and driver_name   Ben Dooks
    • [PATCH] serial: SAMSUNG: Fix dev_name and driver_name   Joonyoung Shim
      • [PATCH] serial: SAMSUNG: Fix dev_name and driver_name   Ben Dooks
      • [PATCH] serial: SAMSUNG: Fix dev_name and driver_name   Joonyoung Shim
• [PATCH] ARM: Add a config option for the ARM11MPCore DMA cache maintenance workaround   Catalin Marinas
  • [PATCH] ARM: Add a config option for the ARM11MPCore DMA cache maintenance workaround   Ronen Shitrit
• [PATCH 2.6.34] mx5: bring usb phy out of reset on freescale mx51 babbage hw   Dinh.Nguyen at freescale.com
• [PATCH 0/2] mc13783: LED support   Philippe Rétornaz
• [PATCH 1/2] mc13783: add LED support   Philippe Rétornaz
  • [PATCH 2/2] mx31moboard: Add MC13783 led support   Philippe Rétornaz
  • [PATCH 1/2] mc13783: add LED support   Uwe Kleine-König
    • [PATCH 1/2] mc13783: add LED support   Mark Brown
      • [PATCH 1/2] mc13783: add LED support   Richard Purdie
      • [PATCH 1/2] mc13783: add LED support   Mark Brown
    • [PATCH 1/2] mc13783: add LED support   Philippe Rétornaz
      • [PATCH 1/2] mc13783: add LED support   Daniel Mack
      • [PATCH 1/2] mc13783: add LED support   Philippe Rétornaz
      • [PATCH 1/2] mc13783: add LED support   Richard Purdie
• [PATCH 1/2] MX3X: Add Keypad device definition for MX3X arch   Alberto Panizzo
  • [PATCH 2/2] mx31_3ds: Support the keypad situated in the personality board   Alberto Panizzo
    • [PATCH 2/2] mx31_3ds: Support the keypad situated in the personality board   MXC Sascha Hauer
      • [PATCH 2/2] mx31_3ds: Support the keypad situated in the personality board   Alberto Panizzo
• [PATCH 1/2] ARM: S3C64XX: Add USB external clock definition   Maurus Cuelenaere
  • [PATCH 1/2] ARM: S3C64XX: Add USB external clock definition   Ben Dooks
• async_tx.git updated   Dan Williams
  • async_tx.git updated   Linus WALLEIJ
• [PATCH v2] PXA DMA-capable PATA driver   Marek Vasut
• [PATCH v3] PXA DMA-capable PATA driver   Marek Vasut
  • [PATCH v3] PXA DMA-capable PATA driver   Marek Vasut
    • [PATCH v3] PXA DMA-capable PATA driver   Robert Jarzmik
      • [PATCH v3] PXA DMA-capable PATA driver   Marek Vasut
  • [PATCH v3] PXA DMA-capable PATA driver   Jeff Garzik
    • [PATCH v3] PXA DMA-capable PATA driver   Marek Vasut
• [PATCH] RFC: PL08X DMA driver and signal muxing   Linus Walleij
• Samsung SoCs framebuffer re-work   Kyungmin Park
  • Samsung SoCs framebuffer re-work   Kukjin Kim
  • Samsung SoCs framebuffer re-work   Ben Dooks
    • Samsung SoCs framebuffer re-work   Kyungmin Park
      • Samsung SoCs framebuffer re-work   Ben Dooks
      • Samsung SoCs framebuffer re-work   Pawel Osciak
      • Samsung SoCs framebuffer re-work   Ben Dooks
      • Samsung SoCs framebuffer re-work   Pawel Osciak
• [PATCH 00/13] More omap platform init code for 2.6.35 merge window   Tony Lindgren
  • [PATCH 01/13] omap: Fix i2c platform init code for omap4   Tony Lindgren
    • [PATCH 01/13] omap: Fix i2c platform init code for omap4   Tony Lindgren
• [PATCH 02/13] omap4: Add support for i2c init   Tony Lindgren
  • [PATCH 02/13] omap4: Add support for i2c init   Tony Lindgren
• [PATCH 03/13] omap4: Add i2c board support on omap4430 sdp platform   Tony Lindgren
• [PATCH 04/13] omap4: add i2c1 peripherals data   Tony Lindgren
• [PATCH 05/13] omap4: Enable RTC and regulator support   Tony Lindgren
• [PATCH 06/13] omap4: Adds Dummy Interface clock's for MMC controllers   Tony Lindgren
• [PATCH 07/13] omap4: Adding hsmmc support to board file   Tony Lindgren
• [PATCH 08/13] omap4: Adding PBIAS Configuration for MMC1 Controller   Tony Lindgren
• [PATCH 09/13] omap4: Enable HSMMC support   Tony Lindgren
• [PATCH 10/13] omap3: Add support for OMAP3Stalker boards   Tony Lindgren
• [PATCH 11/13] omap3: Add OMAP3 Stalker board LK-S defconfig   Tony Lindgren
• [PATCH 12/13] omap3: update omap3_defconfig   Tony Lindgren
• [PATCH 13/13] omap3: Add stalker board to omap3_defconfig   Tony Lindgren
• Boot interface for device trees on ARM   Jeremy Kerr
  • Boot interface for device trees on ARM   Nicolas Pitre
    • Boot interface for device trees on ARM   Jeremy Kerr
      • Boot interface for device trees on ARM   David Gibson
      • Boot interface for device trees on ARM   Nicolas Pitre
      • Boot interface for device trees on ARM   Jason McMullan
      • Boot interface for device trees on ARM   David Gibson
      • Boot interface for device trees on ARM   David Gibson
      • Boot interface for device trees on ARM   Nicolas Pitre
      • Boot interface for device trees on ARM   David Gibson
      • Boot interface for device trees on ARM   Grant Likely
      • Boot interface for device trees on ARM   Jamie Lokier
      • Boot interface for device trees on ARM   David Gibson
      • Boot interface for device trees on ARM   Grant Likely
      • Boot interface for device trees on ARM   Mitch Bradley
      • Boot interface for device trees on ARM   Jeremy Kerr
      • Boot interface for device trees on ARM   Nicolas Pitre
      • Boot interface for device trees on ARM   Grant Likely
      • Boot interface for device trees on ARM   Jamie Lokier
      • Boot interface for device trees on ARM   Grant Likely
      • Boot interface for device trees on ARM   M. Warner Losh
    • Boot interface for device trees on ARM   Grant Likely
      • Boot interface for device trees on ARM   Russell King - ARM Linux
      • Boot interface for device trees on ARM   Nicolas Pitre
      • Boot interface for device trees on ARM   Jamie Lokier
      • Boot interface for device trees on ARM   Nicolas Pitre
      • Boot interface for device trees on ARM   John Rigby
      • Boot interface for device trees on ARM   Jamie Bennett
      • Boot interface for device trees on ARM   Russell King - ARM Linux
  • Boot interface for device trees on ARM   Grant Likely
• [PATCHESv3] S3C: DMA: Support for PL330   Jassi Brar
  • [PATCH 1/6] S3C: DMA: Change argument of s3c2410_dma_devconfig   Jassi Brar
  • [PATCH 2/6] S3C: DMA: Add api driver for PL330   Jassi Brar
  • [PATCH 3/6] S5PC100: DMA: Add platform devices for PL330 DMACs   Jassi Brar
  • [PATCH 4/6] S5P6440: DMA: Add platform devices for PL330 DMACs   Jassi Brar
  • [PATCH 5/6] S5P6442: DMA: Add platform devices for PL330 DMACs   Jassi Brar
  • [PATCH 6/6] S5PV210: DMA: Add platform devices for PL330 DMACs   Jassi Brar
• [RFC PATCH 0/3] ep93xx i2s audio   Ryan Mallon
  • [RFC PATCH 1/3] ep93xx i2s driver   Ryan Mallon
    • [RFC PATCH 1/3] ep93xx i2s driver   Chase Douglas
      • [RFC PATCH 1/3] ep93xx i2s driver   Mark Brown
      • [RFC PATCH 1/3] ep93xx i2s driver   Ryan Mallon
    • [RFC PATCH 1/3] ep93xx i2s driver   H Hartley Sweeten
      • [RFC PATCH 1/3] ep93xx i2s driver   Ryan Mallon
    • [RFC PATCH 1/3] ep93xx i2s driver   Mark Brown
  • [RFC PATCH 2/3] ep93xx i2s core support   Ryan Mallon
    • [RFC PATCH 2/3] ep93xx i2s core support   Chase Douglas
      • [RFC PATCH 2/3] ep93xx i2s core support   Ryan Mallon
    • [RFC PATCH 2/3] ep93xx i2s core support   H Hartley Sweeten
  • [RFC PATCH 3/3] ep93xx i2s snapper cl15 support   Ryan Mallon
    • [RFC PATCH 3/3] ep93xx i2s snapper cl15 support   Chase Douglas
    • [RFC PATCH 3/3] ep93xx i2s snapper cl15 support   H Hartley Sweeten
    • [RFC PATCH 3/3] ep93xx i2s snapper cl15 support   Mark Brown
  • [RFC PATCH 0/3] ep93xx i2s audio   Chase Douglas
  • [RFC PATCH 0/3] ep93xx i2s audio   Mark Brown
    • [RFC PATCH 0/3] ep93xx i2s audio   Ryan Mallon
  • [RFC PATCH 0/3] ep93xx i2s audio   Mark Brown
    • [RFC PATCH 0/3] ep93xx i2s audio   Ryan Mallon
• [PATCH] SAMSUNG: Audio support   Jassi Brar
  • [PATCH 1/9] ARM: S5PV210: Add audio platform devices   Jassi Brar
    • [PATCH 1/9] ARM: S5PV210: Add audio platform devices   Ben Dooks
      • [PATCH 1/9] ARM: S5PV210: Add audio platform devices   Jassi Brar
      • [PATCH 1/9] ARM: S5PV210: Add audio platform devices   Ben Dooks
      • [PATCH 1/9] ARM: S5PV210: Add audio platform devices   Jassi Brar
  • [PATCH 4/9] ARM: S5PC100: Add audio platform devices   Jassi Brar
  • [PATCH 5/9] ARM: SMDKC100: Add audio devices on board   Jassi Brar
  • [PATCH 6/9] ARM: S5P6442: Add audio platform devices   Jassi Brar
  • [PATCH 7/9] ARM: SMDK6442: Add audio devices on board   Jassi Brar
  • [PATCH 8/9] ARM: S5P6440: Add audio platform devices   Jassi Brar
  • [PATCH 9/9] ARM: SMDK6440: Add audio devices on board   Jassi Brar
  • [PATCH] SAMSUNG: Audio support   Mark Brown
• [PATCH 2/9] ARM: SMDKV210: Add audio devices on board   Jassi Brar
• [PATCH 3/9] ARM: SMDKC110: Add audio devices on board   Jassi Brar
• [PATCH v2] NUC900/audio: add nuc900 audio driver support   Wan ZongShun
  • [PATCH v2] NUC900/audio: add nuc900 audio driver support   Wan ZongShun
    • [PATCH v2] NUC900/audio: add nuc900 audio driver support   Liam Girdwood
    • [PATCH v2] NUC900/audio: add nuc900 audio driver support   Mark Brown
      • [alsa-devel] [PATCH v2] NUC900/audio: add nuc900 audio driver support   Liam Girdwood
      • [alsa-devel] [PATCH v2] NUC900/audio: add nuc900 audio driver support   Mark Brown
• [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung   Kukjin Kim
  • [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung   Ben Dooks
  • [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung   Ben Dooks
    • [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung   Mark Brown
      • [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung   Ben Dooks
      • [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung   Mark Brown
• [PATCH 2/8] ARM: SAMSUNG: Fixed coding style issue   Kukjin Kim
  • [PATCH 2/8] ARM: SAMSUNG: Fixed coding style issue   Ben Dooks
• [PATCH 3/8] ARM: SAMSUNG: Add S3C64XX RTC register definitions   Kukjin Kim
• [PATCH 4/8] rtc: rtc-s3c: Add alarm_irq_enable RTC class operation   Kukjin Kim
  • [PATCH 4/8] rtc: rtc-s3c: Add alarm_irq_enable RTC class operation   Ben Dooks
• [PATCH 5/8] rtc: rtc-s3c: Add RTC support for Samsung S3C64XX   Kukjin Kim
  • [PATCH 5/8] rtc: rtc-s3c: Add RTC support for Samsung S3C64XX   Ben Dooks
• [PATCH 6/8] ARM: S3C64XX: Add RTC Driver support   Kukjin Kim
  • [PATCH 6/8] ARM: S3C64XX: Add RTC Driver support   Ben Dooks
• [PATCH 7/8] ARM: S5P6440: Add RTC Driver support   Kukjin Kim
• [PATCH 8/8] ARM: S5PV210: Add RTC Driver support   Kukjin Kim
• [Linux-arm-nuc900] NUC900 nand driver Patch   Wan ZongShun
  • [Linux-arm-nuc900] NUC900 nand driver Patch   wills wang
• [PATCHv2] SAMSUNG: Audio support   Jassi Brar
  • [PATCH 1/9] ARM: S5PV210: Add audio platform devices   Jassi Brar
  • [PATCH 2/9] ARM: SMDKV210: Add audio devices on board   Jassi Brar
  • [PATCH 4/9] ARM: S5PC100: Add audio platform devices   Jassi Brar
  • [PATCH 5/9] ARM: SMDKC100: Add audio devices on board   Jassi Brar
  • [PATCH 6/9] ARM: S5P6442: Add audio platform devices   Jassi Brar
  • [PATCH 8/9] ARM: S5P6440: Add audio platform devices   Jassi Brar
  • [PATCH 9/9] ARM: SMDK6440: Add audio devices on board   Jassi Brar
  • [PATCHv2] SAMSUNG: Audio support   Ben Dooks
  • [PATCHv2] SAMSUNG: Audio support   Ben Dooks
• [PATCH 3/9] ARM: SMDKC110: Add audio devices on board   Jassi Brar
• [PATCH 7/9] ARM: SMDK6442: Add audio devices on board   Jassi Brar
• [PATCH] SAMSUNG: SPI platform support   Jassi Brar
  • [PATCH 1/4] ARM: S5PC100: Define SPI platform devices   Jassi Brar
  • [PATCH 2/4] ARM: S5PV210: Define SPI platform devices   Jassi Brar
  • [PATCH 4/4] ARM: S5P6442: Define SPI platform devices   Jassi Brar
• [PATCH 3/4] ARM: S5P6440: Define SPI platform devices   Jassi Brar
• i.MX27 Clock sources   Stuart Longland
  • i.MX27 Clock sources   Lothar Waßmann
    • i.MX27 Clock sources   Stuart Longland
• [PATCH 0/3] ux500: Add basic PM support   Sundar Iyer
  • [PATCH 1/3] ux500: Add cpu hotplug suport for ux500 platform   Sundar Iyer
  • [PATCH 2/3] ux500: Add basic PRCM TCDM support   Sundar Iyer
  • [PATCH 3/3] ux500: Add CPUFreq support   Sundar Iyer
• [PATCH] NUC900/rtc: change the waiting for device ready implement   Wan ZongShun
  • [PATCH] NUC900/rtc: change the waiting for device ready implement   Wan ZongShun
• [PATCH] SMDKC100 fixes   Marek Szyprowski
  • [PATCH 1/2] ARM: SMDKC100: fix frame buffer definitions   Marek Szyprowski
  • [PATCH 2/2] ARM: SMDKC100: remove magic values from uart setup structures   Marek Szyprowski
  • [PATCH] SMDKC100 fixes   Ben Dooks
• [PATCH] Common plat-s5p updates   Marek Szyprowski
  • [PATCH 1/2] ARM: Samsung: copy common I2C0 device helpers to machine directories   Marek Szyprowski
    • [PATCH 1/2] ARM: Samsung: copy common I2C0 device helpers to machine directories   Ben Dooks
  • [PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir   Marek Szyprowski
    • [PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir   Ben Dooks
• [RFC PATCH v2] preliminary support for sparse IRQ   Eric Miao
  • [RFC PATCH v2] preliminary support for sparse IRQ   Marek Vasut
    • [RFC PATCH v2] preliminary support for sparse IRQ   Eric Miao
  • [RFC PATCH v2] preliminary support for sparse IRQ   Paul Mundt
    • [RFC PATCH v2] preliminary support for sparse IRQ   Eric Miao
      • [RFC PATCH v2] preliminary support for sparse IRQ   Paul Mundt
    • [RFC PATCH v2] preliminary support for sparse IRQ   Russell King - ARM Linux
      • [RFC PATCH v2] preliminary support for sparse IRQ   Eric Miao
  • [RFC PATCH v2] preliminary support for sparse IRQ   Will Deacon
• No subject   Marek Szyprowski
  • [PATCH 04/11] ARM: S5PC100: gpio.h cleanup   Marek Szyprowski
  • [PATCH 08/11] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework   Marek Szyprowski
  • [PATCH 10/11] ARM: S5PC100: use common plat-s5p external interrupt code   Marek Szyprowski
    • [PATCH 10/11] ARM: S5PC100: use common plat-s5p external interrupt code   Ben Dooks
      • [PATCH 10/11] ARM: S5PC100: use common plat-s5p external interrupt code   Marek Szyprowski
      • [PATCH 10/11] ARM: S5PC100: use common plat-s5p external interrupt code   Ben Dooks
      • [PATCH 10/11] ARM: S5PC100: use common plat-s5p external interrupt code   Ben Dooks
  • [PATCH 11/11] ARM: remove obsolete plat-s5pc1xx directory   Marek Szyprowski
  •   Kukjin Kim
  • your mail   Ben Dooks
• [PATCH 01/11] drivers: serial: S5PC100 serial driver cleanup   Marek Szyprowski
• [PATCH 02/11] ARM: S5PC100: Use common functions for gpiolib implementation   Marek Szyprowski
• [PATCH 03/11] ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
• [PATCH 05/11] ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
• [PATCH 06/11] ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
• [PATCH 07/11] ARM: S5PC100: Move sdhci helpers from plat-s5pc1xx to mach-s5pc100   Marek Szyprowski
• [PATCH 09/11] ARM: S5PC100: Add support for gpio interrupt   Marek Szyprowski
• first tree for samsung   Ben Dooks
• s3c-fb updates   Ben Dooks
  • [PATCH 1/5] s3c-fb: Change to depending on CONFIG_S3C_FB_DEV   Ben Dooks
  • [PATCH 2/5] s3c-fb: only init window colour key controls for windows with blending   Ben Dooks
  • [PATCH 3/5] s3c-fb: Initial move to unifying the header files   Ben Dooks
  • [PATCH 4/5] s3c-fb: udpate to support s3c2416/s3c2443 style hardware   Ben Dooks
  • [PATCH 5/5] s3c-fb: Integrate palette setup code into main driver   Ben Dooks
  • s3c-fb updates   Kyungmin Park
    • s3c-fb updates   Ben Dooks
      • s3c-fb updates   InKi Dae
      • s3c-fb updates   Ben Dooks
      • s3c-fb updates   Yauhen Kharuzhy
• [PATCH v3 1/9] ARM: SAMSUNG: Moving ADC device definitions to plat-samsung   Kukjin Kim
• [PATCH v3 3/9] ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen   Kukjin Kim
  • [PATCH v3 3/9] ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen   Ben Dooks
• [PATCH v3 4/9] Input: s3c24xx_ts - Implements generic GPIO configuration function   Kukjin Kim
• [PATCH v2 5/9] Input: s3c24xx_ts - Adds FEAT for Samsung touchscreen support   Kukjin Kim
• [PATCH v3 6/9] ARM: S3C64XX: Adds Touchscreen support for S3C64XX   Kukjin Kim
  • [PATCH v3 6/9] ARM: S3C64XX: Adds Touchscreen support for S3C64XX   Ben Dooks
• [PATCH v2 7/9] ARM: S5P6440: Adds Touchscreen support for S5P6440   Kukjin Kim
• [PATCH v3 8/9] ARM: S5PV210: Adds Touchscreen support for S5PV210   Kukjin Kim
  • [PATCH v3 8/9] ARM: S5PV210: Adds Touchscreen support for S5PV210   Kyungmin Park
• [PATCH v3 9/9] Input: s3c24xx_ts - Modify touchscreen Kconfig for Support Samsung SoCs   Kukjin Kim
• [PATCH 0/0] Adds Touchscreen & ADC Support for Samsung SoCs.   Kukjin Kim
• [PATCH v2 2/9] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Kukjin Kim
• [PATCH 00/23] OMAP DSS patches for 2.6.35 merge window   Tomi Valkeinen
  • [PATCH 02/23] OMAP: AM3517: Enable DSS2 in AM3517EVM defconfig   Tomi Valkeinen
  • [PATCH 03/23] OMAP: DSS2: Add Kconfig option for DPI display type   Tomi Valkeinen
  • [PATCH 04/23] OMAP: DSS2: Remove redundant enable/disable calls from SDI   Tomi Valkeinen
  • [PATCH 05/23] OMAP: DSS2: Use vdds_sdi regulator supply in SDI   Tomi Valkeinen
  • [PATCH 06/23] OMAP: DSS2: fix lock_fb_info() and omapfb_lock() locking order   Tomi Valkeinen
  • [PATCH 07/23] OMAP: DSS2: check lock_fb_info() return value   Tomi Valkeinen
  • [PATCH 08/23] OMAP: DSS2: VENC: don't call platform_enable/disable() twice   Tomi Valkeinen
  • [PATCH 09/23] OMAP: DSS2: Fix device disable when driver is not loaded   Tomi Valkeinen
  • [PATCH 10/23] OMAP: DSS2: Make partial update width even   Tomi Valkeinen
  • [PATCH 11/23] OMAP: DSS2: Taal: add mutex to protect panel data   Tomi Valkeinen
  • [PATCH 12/23] OMAP: DSS2: Taal: Fix DSI bus locking problem   Tomi Valkeinen
  • [PATCH 13/23] OMAP: LCD LS037V7DW01: Add Backlight driver support   Tomi Valkeinen
  • [PATCH 14/23] OMAP: DSS2: TPO-TD03MTEA1: fix Kconfig dependency   Tomi Valkeinen
  • [PATCH 15/23] OMAP: RX51: Add LCD Panel support   Tomi Valkeinen
  • [PATCH 16/23] OMAP: RX51: Add Touch Controller in SPI board info   Tomi Valkeinen
  • [PATCH 17/23] OMAP: DSS2: Add ACX565AKM Panel Driver   Tomi Valkeinen
  • [PATCH 18/23] OMAP: RX51: Update board defconfig   Tomi Valkeinen
  • [PATCH 19/23] OMAP3630: DSS2: Updating MAX divider value   Tomi Valkeinen
  • [PATCH 20/23] OMAP2: DSS: Add missing line for update bg color   Tomi Valkeinen
  • [PATCH 21/23] board-omap3-beagle: add DSS2 support   Tomi Valkeinen
  • [PATCH 22/23] OMAP: DSS2: omap_dss_probe() conditional compilation cleanup   Tomi Valkeinen
  • [PATCH 23/23] OMAP: DSS2: Fix omap_dss_probe() error path   Tomi Valkeinen
• [PATCH 01/23] OMAP: Enable DSS2 in OMAP3EVM defconfig   Tomi Valkeinen
• [PATCH 1/1] omap mailbox: Set a device in logical mbox instances for traceability   Hiroshi DOYU
• Status of Samsung s3c6410 / smdk6410 / etc...?   Nick Pelling
  • Status of Samsung s3c6410 / smdk6410 / etc...?   Ben Dooks
• Status of Samsung s3c6410 / smdk6410 / etc...?   Nick Pelling
• [RFC/PATCH] arm: oprofile: remove locking from suspend/resume   Kevin Hilman
  • [RFC/PATCH] arm: oprofile: remove locking from suspend/resume   Russell King - ARM Linux
    • [RFC/PATCH] arm: oprofile: remove locking from suspend/resume   Kevin Hilman
• Known issues with amba-pl010.c driver?   H Hartley Sweeten
  • Known issues with amba-pl010.c driver?   Russell King - ARM Linux
    • Known issues with amba-pl010.c driver?   H Hartley Sweeten
      • Known issues with amba-pl010.c driver?   Russell King - ARM Linux
      • Known issues with amba-pl010.c driver?   H Hartley Sweeten
• [PATCH] input: fix irq number of onkey in 88pm860x   Haojian Zhuang
• [PATCH 00/22] OMAP PRCM/clock/powerdomain/hwmod: remaining patches for 2.6.35   Paul Walmsley
  • [PATCH 03/22] OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function   Paul Walmsley
  • [PATCH 05/22] OMAP: hwmod: Fix wrong pointer iteration in oh->slaves   Paul Walmsley
  • [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check   Paul Walmsley
    • [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check   Sergei Shtylyov
      • [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check   Sergei Shtylyov
      • [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check   Benoit Cousson
  • [PATCH 11/22] OMAP4: CM: Remove non-functional registers in ES1.0   Paul Walmsley
  • [PATCH 12/22] OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention   Paul Walmsley
  • [PATCH 13/22] OMAP4: PRCM: Remove duplicate definition of base addresses   Paul Walmsley
  • [PATCH 14/22] OMAP4: PRCM: Add offset defines for all PRM registers   Paul Walmsley
  • [PATCH 15/22] OMAP4: PRCM: Add offset defines for all CM registers   Paul Walmsley
  • [PATCH 16/22] OMAP4 clock: Support clk_set_parent   Paul Walmsley
  • [PATCH 17/22] OMAP: timers: Fix clock source names for OMAP4   Paul Walmsley
  • [PATCH 18/22] OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains   Paul Walmsley
  • [PATCH 19/22] OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate   Paul Walmsley
  • [PATCH 20/22] OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains   Paul Walmsley
  • [PATCH 21/22] OMAP powerdomain, hwmod, omap_device: add some credits   Paul Walmsley
  • [PATCH 22/22] OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y   Paul Walmsley
• [PATCH 01/22] OMAP4: hwmod: Replace module & device offsets by absolute clkctrl address   Paul Walmsley
• [PATCH 02/22] OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h   Paul Walmsley
• [PATCH 04/22] OMAP4: hwmod: Replace OCPIF_HAS_IDLEST by HWMOD_NO_IDLEST   Paul Walmsley
• [PATCH 06/22] OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value   Paul Walmsley
• [PATCH 07/22] OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed   Paul Walmsley
  • [PATCH 07/22] OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed   Sergei Shtylyov
    • [PATCH 07/22] OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed   Benoit Cousson
• [PATCH 08/22] OMAP: hwmod: Do not exit the iteration if one clock init failed   Paul Walmsley
• [PATCH 09/22] OMAP: hwmod: Rename hwmod name for the MPU   Paul Walmsley
• [PATCH] leds: remove auto blink in 88pm860x   Haojian Zhuang
• [PATCH] mfd: fix led resource in 88pm860x   Haojian Zhuang
• Samsung touchscreen updates   Ben Dooks
  • [PATCH 1/8] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Ben Dooks
  • [PATCH 2/8] ARM: S3C64XX: Add touchscreen platform device definition   Ben Dooks
  • [PATCH 3/8] ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen   Ben Dooks
  • [PATCH 4/8] ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration   Ben Dooks
  • [PATCH 5/8] Input: s3c24xx_ts - Implement generic GPIO configuration callback   Ben Dooks
  • [PATCH 6/8] Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support   Ben Dooks
    • [PATCH 6/8] Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support   Vasily Khoruzhick
  • [PATCH 7/8] Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry   Ben Dooks
  • [PATCH 8/8] Input: s3c24xx_ts - fix selection of S3C_ADC   Ben Dooks
  • Samsung touchscreen updates   Dmitry Torokhov
    • Samsung touchscreen updates   Ben Dooks
      • Samsung touchscreen updates   Dmitry Torokhov
• [PATCH] Watchdog: Adding support for Watchdog found with ARM CortexA9   Viresh KUMAR
• [PATCH 01/05] input: fix irq number of onkey in 88pm860x   Haojian Zhuang
  • [PATCH 01/05] input: fix irq number of onkey in 88pm860x   Dmitry Torokhov
• [PATCH 02/05] mfd: enable onkey on max8925   Haojian Zhuang
• [PATCH 03/05] input: enable onkey driver of max8925   Haojian Zhuang
  • [PATCH 03/05] input: enable onkey driver of max8925   Dmitry Torokhov
    • [PATCH 03/05] input: enable onkey driver of max8925   Haojian Zhuang
• [PATCH 04/05] mfd: fix led resource in 88pm860x   Haojian Zhuang
• [PATCH 05/05] leds: remove auto blink in 88pm860x   Haojian Zhuang
• [PATCH 0/5] mfd: update 88pm860x and max8925   Haojian Zhuang
• [PATCH 0/2 v2] mc13783: LED support   Philippe Rétornaz
• [PATCH 1/2 v2] mc13783: add LED support   Philippe Rétornaz
• [PATCH 2/2 v2] mx31moboard: Add MC13783 led support   Philippe Rétornaz
• [PATCH v4] ARM: S5PV210: Add GPIOlib support   Kukjin Kim
• Please pull s3c-fb driver updates   Ben Dooks
• [PATCH 0/2 v2] MX3X: Architecture specific mx3 keypad support   Alberto Panizzo
  • [PATCH 1/2 v2] MX3X: Add Keypad device definition for MX3X arch   Alberto Panizzo
    • [PATCH 2/2 v2] mx31_3ds: Support the keypad situated in the personality board   Alberto Panizzo
  • [PATCH 0/2 v2] MX3X: Architecture specific mx3 keypad support   MXC Sascha Hauer
• Please pull for-linus/samsung4   Ben Dooks
  • Please pull for-linus/samsung4   Nick Pelling
    • Please pull for-linus/samsung4   Russell King - ARM Linux
    • Please pull for-linus/samsung4   Ben Dooks
• [PATCH] ARMv7: Use the Inner Shareable I-cache on MP   Santosh Shilimkar
• [PATCH v2] ARMv7: Use the Inner Shareable I-cache on MP   Santosh Shilimkar
  • [PATCH v2] ARMv7: Use the Inner Shareable I-cache on MP   Venkatraman S
    • [PATCH v2] ARMv7: Use the Inner Shareable I-cache on MP   Shilimkar, Santosh
      • [PATCH v2] ARMv7: Use the Inner Shareable I-cache on MP   Catalin Marinas
• [PATCH v4] PXA DMA-capable PATA driver   Marek Vasut
• Please pull mxc branch   Sascha Hauer
• [PATCH] ARM: S5PV210: Add GONI board support   Joonyoung Shim
  • [PATCH] ARM: S5PV210: Add GONI board support   Ben Dooks
    • [PATCH] ARM: S5PV210: Add GONI board support   Kyungmin Park
      • [PATCH] ARM: S5PV210: Add GONI board support   Ben Dooks
      • [PATCH] ARM: S5PV210: Add GONI board support   Russell King - ARM Linux
      • [PATCH] ARM: S5PV210: Add GONI board support   Kyungmin Park
• [PATCH 3/4] fec: add support for Freescale i.MX25 PDK (3DS)   Jean-Christophe Dubois
  • [PATCH 3/4] fec: add support for Freescale i.MX25 PDK (3DS)   Sascha Hauer
    • [PATCH 3/4] fec: add support for Freescale i.MX25 PDK (3DS)   David Miller
• usb gadget on zaurus and kexec   Cyril Hrubis
  • usb gadget on zaurus and kexec   Eric Miao
• [PATCH 01/13] eukrea_mbimx27-baseboard: fix typo in display name   Eric Bénard
  • [PATCH 02/13] eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls   Eric Bénard
    • [PATCH 03/13] eukrea_mbimx27-baseboard: add timings for DVI output   Eric Bénard
      • [PATCH 04/13] cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usage   Eric Bénard
      • [PATCH 05/13] mach-cpuimx27: fix QuadUART's IRQ typo in pins'setup   Eric Bénard
      • [PATCH 06/13] eukrea_mbimx27: fix ADS7846 support   Eric Bénard
      • [PATCH 07/13] mach-cpuimx27: add USB Host2 and OTG support   Eric Bénard
      • [PATCH 08/13] mach-cpuimx27: register wdt and w1_master resources   Eric Bénard
      • [PATCH 09/13] mxcmmc: add card detect through DAT3 possibility   Eric Bénard
      • [PATCH 10/13] eukrea_mbimx27: use card detect through DAT3 for SDHC1   Eric Bénard
      • [PATCH 11/13] MX2X: Add Keypad device definition for MX2X arch   Eric Bénard
      • [PATCH 12/13] eukrea_mbimx27: add support for the keyboard   Eric Bénard
      • [PATCH 13/13] mx27_defconfig: update to enable cpuimx27 & mbimx27   Eric Bénard
      • [PATCH 09/13] mxcmmc: add card detect through DAT3 possibility   Daniel Mack
      • [PATCH 09/13] mxcmmc: add card detect through DAT3 possibility   Eric Bénard
      • [PATCH 09/13] mxcmmc: add card detect through DAT3 possibility   Daniel Mack
      • [PATCH] mxcmmc: add card detect through DAT3 possibility   Eric Bénard
      • [PATCH 06/13] eukrea_mbimx27: fix ADS7846 support   Sascha Hauer
      • [PATCH v2] eukrea_mbimx27: fix ADS7846 support   Eric Bénard
    • [PATCH 02/13] eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls   Sascha Hauer
• Support Question   Amit kumar
  • Support Question   Nicolas Ferre
  • Support Question   Bill Gatliff
• [patch] nuc900fb: release correct mem region   Dan Carpenter
  • [patch] nuc900fb: release correct mem region   Wan ZongShun
    • [patch] nuc900fb: release correct mem region   Andrew Morton
• [PATCH 1/3] [ARM] remove duplicated #include   Huang Weiyi
• [GIT PULL] OMAP clock/powerdomain/hwmod/omap_device patches for 2.6.35   Paul Walmsley
• [PATCH v4 0/0] Adds TSADC support for S3C64XX, S5P6440, and S5PV210   Kukjin Kim
  • [PATCH v4 1/3] ARM: S3C64XX: Adds Touchscreen support for S3C64XX   Kukjin Kim
    • [PATCH v4 2/3] ARM: S5P6440: Adds Touchscreen support for S5P6440   Kukjin Kim
  • [PATCH v4 0/0] Adds TSADC support for S3C64XX, S5P6440, and S5PV210   Ben Dooks
• [PATCH v4 3/3] ARM: S5PV210: Adds Touchscreen support for S5PV210   Kukjin Kim
• [PATCH v6] ARM: S5P: Add Ext interrupt support.   Kukjin Kim
  • [PATCH v6] ARM: S5P: Add Ext interrupt support.   Ben Dooks
  • [PATCH v6] ARM: S5P: Add Ext interrupt support.   Marek Szyprowski
• [PATCH v3 1/2] spi: implemented driver for Cirrus EP93xx SPI controller   Grant Likely
• [PATCH v6 RE-SEND] ARM: S5P: Add Ext interrupt support.   Kukjin Kim
• [PATCH v4] ARM: Samsung: plat-s5pc1xx cleanup   Marek Szyprowski
  • [PATCH 1/4] ARM: Samsung: move S5PC100 support from plat-s5pc1xx to plat-s5p framework   Marek Szyprowski
  • [PATCH 2/4] ARM: S5PC100: Add support for gpio interrupt   Marek Szyprowski
  • [PATCH 3/4] ARM: S5PC100: use common plat-s5p external interrupt code   Marek Szyprowski
  • [PATCH 4/4] ARM: remove obsolete plat-s5pc1xx directory   Marek Szyprowski
• [PATCH v3] Add support for Samsung Aquila board (S5PC110 based)   Marek Szyprowski
  • [PATCH 1/7] ARM: S5PV210: add support for software reset   Marek Szyprowski
  • [PATCH 2/7] ARM: S5PV210: add Aquila board   Marek Szyprowski
  • [PATCH 3/7] ARM: Samsung: move common framebuffer regs to common platform directory   Marek Szyprowski
  • [PATCH 4/7] ARM: S5PV210: add framebuffer platform helpers for s5pv210 based machines   Marek Szyprowski
  • [PATCH 5/7] ARM: S5PV210: add support for s3c-fb driver on Aquila machine   Marek Szyprowski
  • [PATCH 6/7] ARM: S5PV210: add common I2C device helpers   Marek Szyprowski
  • [PATCH 7/7] ARM: S5PV210: add common HSMMC device helpers   Marek Szyprowski
• [PATCH] ARM: Samsung: Add platform support code for OneNAND controller   Marek Szyprowski
  • [PATCH] ARM: Samsung: Add platform support code for OneNAND controller   Ben Dooks
    • [PATCH] ARM: Samsung: Add platform support code for OneNAND controller   Marek Szyprowski
• [PATCH 0/0] Add Watchdog support for Samsung SMDK6410, S5P6440 and S5Pv210   Kukjin Kim
  • [PATCH 1/5] ARM: SAMSUNG: Move WDT device definitions in plat-samsung   Kukjin Kim
    • [PATCH 1/5] ARM: SAMSUNG: Move WDT device definitions in plat-samsung   Ben Dooks
  • [PATCH 2/5] [WATCHDOG] s3c2410_wdt - Avoid freeing memory, if memory region could not be allocated   Kukjin Kim
    • [PATCH 2/5] [WATCHDOG] s3c2410_wdt - Avoid freeing memory, if memory region could not be allocated   Sergei Shtylyov
      • [PATCH 2/5] [WATCHDOG] s3c2410_wdt - Avoid freeing memory, if memory region could not be allocated   Kukjin Kim
  • [PATCH 3/5] ARM: SMDK6410: Add Watchdog support for SMDK6410   Kukjin Kim
  • [PATCH 4/5] ARM: S5P6440: Add Watchdog support for S5P6440   Kukjin Kim
  • [PATCH 5/5] ARM: S5PV210: Add Watchdog support for S5PV210   Kukjin Kim
  • [PATCH 0/0] Add Watchdog support for Samsung SMDK6410, S5P6440 and S5Pv210   Ben Dooks
• [PATCH 01/11] [ARM] pxa: Storage class should be before const qualifier   Tobias Klauser
  • [PATCH 01/11] [ARM] pxa: Storage class should be before const qualifier   Marek Vasut
    • [PATCH 01/11] [ARM] pxa: Storage class should be before const qualifier   Eric Miao
• [PATCH] Watchdog: Adding support for ARM Primecell SP805 Watchdog   Viresh KUMAR
• [RFC PATCH v2] preliminary support for sparse IRQ   Eric Miao
  • [RFC PATCH v2] preliminary support for sparse IRQ   Eric Miao
• [PATCH 1/4] ARM: S5P6440: Add locking to GPIO calls   Ben Dooks
  • [PATCH 2/4] ARM: SAMSUNG: Make ADC client SMP safe   Ben Dooks
  • [PATCH 3/4] ARM: SAMSUNG: Add support for interrupt wakeup-sources   Ben Dooks
• [PATCH 4/4] ARM: S3C64XX: PM: Synchronise wakeup mask on suspend   Ben Dooks
• [PATCH] ARM: S3C6410: Add basic support for SmartQ machines   Maurus Cuelenaere
  • [PATCH] ARM: S3C6410: Add basic support for SmartQ machines   Ben Dooks
• [PATCH 0/3] [WATCHDOG] s3c2410_wdt - Support for Samsung SoCs and Bug fix on   Kukjin Kim
  • [PATCH v2 1/3] [WATCHDOG] s3c2410_wdt - Add extra option to include watchdog for Samsung SoCs   Kukjin Kim
  • [PATCH v2 2/3] ARM: SAMSUNG: Move WDT device definitions in plat-samsung   Kukjin Kim
  • [PATCH v2 3/3] [WATCHDOG] s3c2410_wdt - Fix on handling of the request_mem_region fail   Kukjin Kim
• Samsung watchdog driver updates   Ben Dooks
  • Samsung watchdog driver updates   Wim Van Sebroeck
• [PATCH 1/2] s3c2410_wdt - Add extra option to include watchdog for Samsung SoCs   Ben Dooks
  • [PATCH 1/2] s3c2410_wdt - Add extra option to include watchdog for Samsung SoCs   Sergei Shtylyov
    • [PATCH 1/2] s3c2410_wdt - Add extra option to include watchdog for Samsung SoCs   Russell King - ARM Linux
• [PATCH 2/2] s3c2410_wdt - Fix on handling of the request_mem_region fail   Ben Dooks
• [PATCH 1/2] mx27 devices: Fix CSI/EMMA base addresses   Sascha Hauer
• [PATCH 0/7] Patches for 2.6.35   Catalin Marinas
  • [PATCH 1/7] ARM: Improve the L2 cache performance when PL310 is used   Catalin Marinas
  • [PATCH 2/7] ARM: Align machine_desc.phys_io to a 1MB section   Catalin Marinas
  • [PATCH 3/7] ARM: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds   Catalin Marinas
  • [PATCH 4/7] ARM: The v6_dma_inv_range() function must preserve data on SMP   Catalin Marinas
  • [PATCH 5/7] ARM: Add a config option for the ARM11MPCore DMA cache maintenance workaround   Catalin Marinas
  • [PATCH 6/7] ARM: Add support for the MOVW/MOVT relocations in Thumb-2   Catalin Marinas
  • [PATCH 7/7] ARM: Remove dummy loads from the original relocation address   Catalin Marinas
• [PATCH 0/4] Patches for -next   Catalin Marinas
  • [PATCH 1/4] ARM: Remove the domain switching on ARMv6k/v7 CPUs   Catalin Marinas
    • [PATCH 1/4] ARM: Remove the domain switching on ARMv6k/v7 CPUs   Russell King - ARM Linux
      • [PATCH 1/4] ARM: Remove the domain switching on ARMv6k/v7 CPUs   Catalin Marinas
      • [PATCH 1/4] ARM: Remove the domain switching on ARMv6k/v7 CPUs   Catalin Marinas
      • [PATCH 1/4] ARM: Remove the domain switching on ARMv6k/v7 CPUs   Russell King - ARM Linux
      • [PATCH 1/4] ARM: Remove the domain switching on ARMv6k/v7 CPUs   Catalin Marinas
  • [PATCH 2/4] ARM: Use lazy cache flushing on ARMv7 SMP systems   Catalin Marinas
  • [PATCH 3/4] ARM: Assume new page cache pages have dirty D-cache   Catalin Marinas
  • [PATCH 4/4] ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP   Catalin Marinas
  • [PATCH 0/4] Patches for -next   Shilimkar, Santosh
    • [PATCH 0/4] Patches for -next   Shilimkar, Santosh
    • [PATCH 0/4] Patches for -next   Catalin Marinas
      • [PATCH 0/4] Patches for -next   Shilimkar, Santosh
      • [PATCH 0/4] Patches for -next   Catalin Marinas
      • [PATCH 0/4] Patches for -next   Shilimkar, Santosh
      • [PATCH 0/4] Patches for -next   Russell King - ARM Linux
      • [PATCH 0/4] Patches for -next   Catalin Marinas
      • [PATCH 0/4] Patches for -next   Russell King - ARM Linux
      • [PATCH 0/4] Patches for -next   Catalin Marinas
      • [PATCH 0/4] Patches for -next   Catalin Marinas
      • [PATCH 0/4] Patches for -next   Russell King - ARM Linux
      • [PATCH 0/4] Patches for -next   Catalin Marinas
• [PATCH] OMAP: DSS2: storage class should be before const qualifier   Tobias Klauser
  • [PATCH] OMAP: DSS2: storage class should be before const qualifier   Tomi Valkeinen
• [PATCH] MXC: Update mx3_defconfig with USB, Keypad and cache workaround.   Magnus Lilja
• [PATCH] mx3: remove mx31pdk_defconfig   Fabio Estevam
• [PATCH] pcm037: fix build warning   Wolfram Sang
• [PATCH] pcm037/pcm043/pca100: fix ULPI-related build warnings   Wolfram Sang
• [PATCH 2/2] mx2_camera: pass physical address to DMA engine   Sascha Hauer
• Dmaengine query   rd bairva
• [PATCH 1/5] i.MX27: add suspend to RAM support   Eric Bénard
  • [PATCH 2/5] mxc_nand: fix PM   Eric Bénard
    • [PATCH 3/5] imx_keypad: add PM support   Eric Bénard
      • [PATCH 4/5] eukrea_mbimx27: update keyboard platform data   Eric Bénard
      • [PATCH 5/5] serial/imx.c: fix suspend/resume   Eric Bénard
      • [PATCH 3/5] imx_keypad: add PM support   Russell King - ARM Linux
    • [PATCH 2/5] mxc_nand: fix PM   Lothar Waßmann
      • [PATCH 2/5] mxc_nand: fix PM   Eric Bénard
    • [PATCH 2/5] mxc_nand: fix PM   Wolfram Sang
      • [PATCH 2/5] mxc_nand: fix PM   Eric Bénard
    • [PATCH 2/5] mxc_nand: fix PM   Uwe Kleine-König
      • [PATCH 2/5] mxc_nand: fix PM   Eric Bénard
  • [PATCH 1/5] i.MX27: add suspend to RAM support   Lothar Waßmann
  • [PATCH 1/5] i.MX27: add suspend to RAM support   Russell King - ARM Linux
• Function for revised cpuid format   Bahadir Balban
• RFC: fix misplaced .note.gnu.build-id section   Johannes Stezenbach
  • RFC: fix misplaced .note.gnu.build-id section   Russell King - ARM Linux
    • RFC: fix misplaced .note.gnu.build-id section   Johannes Stezenbach
• [GIT PULL] omap updates for 2.6.35   Tony Lindgren
• Initrd and 2.6.33 curious behaviour   Robert Jarzmik
  • Initrd and 2.6.33 curious behaviour   Russell King - ARM Linux
    • Initrd and 2.6.33 curious behaviour   Robert Jarzmik
    • Initrd and 2.6.33 curious behaviour   Robert Jarzmik
      • Initrd and 2.6.33 curious behaviour   Russell King - ARM Linux
      • Initrd and 2.6.33 curious behaviour   Robert Jarzmik
      • Initrd and 2.6.33 curious behaviour   Russell King - ARM Linux
      • Initrd and 2.6.33 curious behaviour   Robert Jarzmik
      • Initrd and 2.6.33 curious behaviour   Robert Jarzmik
      • Initrd and 2.6.33 curious behaviour   Robert Jarzmik
• [PATCH v2t2 00/17] omap: mailbox:   Felipe Contreras
  • [PATCH v2t2 02/17] omap: mailbox: trivial cleanups   Felipe Contreras
  • [PATCH v2t2 03/17] omap: mailbox: reorganize structures   Felipe Contreras
  • [PATCH v2t2 04/17] omap: mailbox: 2420 should be detected at run-time   Felipe Contreras
  • [PATCH v2t2 05/17] omap: mailbox: use correct config for omap1   Felipe Contreras
  • [PATCH v2t2 06/17] omap: mailbox: update omap1 probing   Felipe Contreras
  • [PATCH v2t2 07/17] omap: mailbox: reorganize registering   Felipe Contreras
  • [PATCH v2t2 08/17] omap: mailbox: only compile for configured archs   Felipe Contreras
  • [PATCH v2t2 09/17] omap: mailbox: reorganize omap platform_device   Felipe Contreras
  • [PATCH v2t2 10/17] omap: mailbox: move more stuff to omap_mbox_init()   Felipe Contreras
  • [PATCH v2t2 11/17] omap: mailbox: trivial sync between omap1 and 2   Felipe Contreras
  • [PATCH v2t2 12/17] omap: mailbox: split platform driver   Felipe Contreras
  • [PATCH v2t2 13/17] omap: mailbox: always built-in platform data   Felipe Contreras
  • [PATCH v2t2 14/17] omap: mailbox: reorganize headers   Felipe Contreras
  • [PATCH v2t2 15/17] omap: mailbox: don't export unecessary symbols   Felipe Contreras
  • [PATCH v2t2 16/17] omap: mailbox: mark some resources as __initdata   Felipe Contreras
  • [PATCH v2t2 17/17] omap: mailbox: don't export register/unregister   Felipe Contreras
  • [PATCH v2t2 00/17] omap: mailbox:   Russell King - ARM Linux
    • [PATCH v2t2 00/17] omap: mailbox:   Felipe Contreras
      • [PATCH v2t2 00/17] omap: mailbox:   Russell King - ARM Linux
      • [PATCH v2t2 00/17] omap: mailbox:   Felipe Contreras
      • [PATCH v2t2 00/17] omap: mailbox:   Hiroshi DOYU
      • [PATCH v2t2 00/17] omap: mailbox:   Felipe Contreras
      • [PATCH v2t2 00/17] omap: mailbox:   Hiroshi DOYU
      • [PATCH v2t2 00/17] omap: mailbox:   Felipe Contreras
      • [PATCH v2t2 00/17] omap: mailbox:   Hiroshi DOYU
      • [PATCH v2t2 00/17] omap: mailbox:   Felipe Contreras
  • [PATCH v2t2 00/17] omap: mailbox:   Hiroshi DOYU
• [PATCH v2t2 01/17] omap: mailbox: trivial whitespace cleanups   Felipe Contreras
• Colibri/PXA270 patchset   Marek Vasut
  • [PATCH 1/8] pxa/colibri270: Refactor board definition file   Marek Vasut
    • [PATCH 1/8] pxa/colibri270: Refactor board definition file   Eric Miao
  • [PATCH 2/8] pxa/colibri270: Add MMC support   Marek Vasut
    • [PATCH 2/8] pxa/colibri270: Add MMC support   Eric Miao
  • [PATCH 3/8] pxa/colibri270: Add FFUART MFP   Marek Vasut
    • [PATCH 3/8] pxa/colibri270: Add FFUART MFP   Eric Miao
  • [PATCH 4/8] pxa/colibri270: Add UHC support   Marek Vasut
    • [PATCH 4/8] pxa/colibri270: Add UHC support   Eric Miao
  • [PATCH 5/8] pxa/colibri270: Add TSC support   Marek Vasut
    • [PATCH 5/8] pxa/colibri270: Add TSC support   Eric Miao
  • [PATCH 6/8] ARM: pxa/colibri-pxa270: split module and base board code   Marek Vasut
    • [PATCH 6/8] ARM: pxa/colibri-pxa270: split module and base board code   Eric Miao
  • [PATCH 7/8] pxa/income: Add Income SBC support   Marek Vasut
    • [PATCH 7/8] pxa/income: Add Income SBC support   Daniel Mack
      • [PATCH 7/8] pxa/income: Add Income SBC support   Eric Miao
      • [PATCH 7/8] pxa/income: Add Income SBC support   Daniel Mack
  • [PATCH 8/8] ARM: pxa/colibri-pxa270: update defconfig   Marek Vasut
• [PATCH] ep93xx: move physmap flash registration into core.c   H Hartley Sweeten
• i.MX27 GPIOs -- how to define the default output?   Stuart Longland
  • i.MX27 GPIOs -- how to define the default output?   Robert Schwebel
  • i.MX27 GPIOs -- how to define the default output?   Sascha Hauer
• [PATCH] Kirkwood: Export GPIO indicating jumper setting of JP1   Martin Michlmayr
• [ARM] pxa: sanitize IRQ register access based on offset   Eric Miao
• [RFC PATCH 1/2] allow each machine to specify it's own IRQ handlers at run-time   Eric Miao
  • [RFC PATCH 1/2] allow each machine to specify it's own IRQ handlers at run-time   Nicolas Pitre
• [RFC PATCH 2/2] pxa: preliminary support for MULTI_IRQ_HANDLER   Eric Miao
• [PATCH 1/5] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag   Benjamin Herrenschmidt
  • [PATCH 1/5] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag   Wolfram Sang
    • [PATCH 1/5] net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag   Benjamin Herrenschmidt
• [PATCH 2/5] arm/orion5x: Base support for DNS-323 rev C1   Benjamin Herrenschmidt
  • [PATCH 2/5] arm/orion5x: Base support for DNS-323 rev C1   Russell King - ARM Linux
    • [PATCH 2/5] arm/orion5x: Base support for DNS-323 rev C1   Benjamin Herrenschmidt
      • [PATCH 2/5] arm/orion5x: Base support for DNS-323 rev C1   Nicolas Pitre
• [PATCH 3/5] arm/orion5x: Fix soft-reset for some platforms   Benjamin Herrenschmidt
• [PATCH 4/5] hwmon: DNS323 rev C1 fan support   Benjamin Herrenschmidt
  • [PATCH 4/5] hwmon: DNS323 rev C1 fan support   Benjamin Herrenschmidt
• [PATCH 5/5] leds-gpio: Change blink_set callback to be able to turn off blinking   Benjamin Herrenschmidt
  • [PATCH 5/5] leds-gpio: Change blink_set callback to be able to turn off blinking   Richard Purdie
    • [PATCH 5/5] leds-gpio: Change blink_set callback to be able to turn off blinking   Benjamin Herrenschmidt
      • [PATCH 5/5] leds-gpio: Change blink_set callback to be able to turn off blinking   Richard Purdie
      • [PATCH 5/5] leds-gpio: Change blink_set callback to be able to turn off blinking   Benjamin Herrenschmidt
• [PATCH v3] NUC900/audio: Add nuc900 audio driver   Wan ZongShun
  • [PATCH v3] NUC900/audio: Add nuc900 audio driver   Mark Brown
    • [PATCH v3] NUC900/audio: Add nuc900 audio driver   Wan ZongShun
• [PATCH 07/12] arm: remove duplicated #include   Huang Weiyi
• [PATCH v3 00/14] omap: mailbox: bunch of cleanups   Felipe Contreras
  • [PATCH v3 01/14] omap: mailbox: trivial whitespace cleanups   Felipe Contreras
    • [PATCH v3 01/14] omap: mailbox: trivial whitespace cleanups   Hiroshi DOYU
  • [PATCH v3 02/14] omap: mailbox: trivial cleanups   Felipe Contreras
  • [PATCH v3 03/14] omap: mailbox: reorganize structures   Felipe Contreras
  • [PATCH v3 04/14] omap: mailbox: 2420 should be detected at run-time   Felipe Contreras
  • [PATCH v3 05/14] omap: mailbox: use correct config for omap1   Felipe Contreras
  • [PATCH v3 06/14] omap: mailbox: update omap1 probing   Felipe Contreras
  • [PATCH v3 07/14] omap: mailbox: don't export unecessary symbols   Felipe Contreras
  • [PATCH v3 08/14] omap: mailbox: remove unecessary fields   Felipe Contreras
  • [PATCH v3 09/14] omap: mailbox: add IRQ names   Felipe Contreras
  • [PATCH v3 10/14] omap: mailbox: reorganize registering   Felipe Contreras
    • [PATCH v3 10/14] omap: mailbox: reorganize registering   Hiroshi DOYU
      • [PATCH v3 10/14] omap: mailbox: reorganize registering   Russell King - ARM Linux
      • [PATCH v3 10/14] omap: mailbox: reorganize registering   Felipe Contreras
  • [PATCH v3 11/14] omap: mailbox: only compile for configured archs   Felipe Contreras
    • [PATCH v3 11/14] omap: mailbox: only compile for configured archs   Hiroshi DOYU
      • [PATCH v3 11/14] omap: mailbox: only compile for configured archs   Felipe Contreras
      • [PATCH v3 11/14] omap: mailbox: only compile for configured archs   Russell King - ARM Linux
  • [PATCH v3 12/14] omap: mailbox: standarize on 'omap-mailbox'   Felipe Contreras
  • [PATCH v3 13/14] omap: mailbox: simplify omap_mbox_register()   Felipe Contreras
    • [PATCH v3 13/14] omap: mailbox: simplify omap_mbox_register()   Hiroshi DOYU
    • [PATCH v3 13/14] omap: mailbox: simplify omap_mbox_register()   Hiroshi DOYU
  • [PATCH v3 14/14] omap: mailbox: reorganize headers   Felipe Contreras
    • [PATCH v3 14/14] omap: mailbox: reorganize headers   Felipe Balbi
      • [PATCH v3 14/14] omap: mailbox: reorganize headers   Felipe Contreras
      • [PATCH v3 14/14] omap: mailbox: reorganize headers   Felipe Balbi
      • [PATCH v3 14/14] omap: mailbox: reorganize headers   Felipe Contreras
• [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
  • [RFC] Initial attempt to make ARM use LMB   Tony Lindgren
    • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
      • [RFC] Initial attempt to make ARM use LMB   Tony Lindgren
      • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
      • [RFC] Initial attempt to make ARM use LMB   Tomi Valkeinen
      • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
      • [RFC] Initial attempt to make ARM use LMB   Tomi Valkeinen
    • [RFC] Initial attempt to make ARM use LMB   Russell King - ARM Linux
      • [RFC] Initial attempt to make ARM use LMB   Tony Lindgren
• [PATCH] Ignore generated files in arch/arm/boot/compressed   Stuart Longland
• [PATCH] s3c24xx fix: freeze during suspend/resume on s3c24xx if some GPIO banks not present   Pinkava J.
  • [PATCH] s3c24xx fix: freeze during suspend/resume on s3c24xx if some GPIO banks not present   Sergei Shtylyov
    • [PATCH] s3c24xx fix: freeze during suspend/resume on s3c24xx if some GPIO banks not present   Pinkava J.
      • [PATCH] s3c24xx fix: freeze during suspend/resume on s3c24xx if some GPIO banks not present   Sergei Shtylyov
    • [PATCH] s3c24xx fix: freeze during suspend/resume on s3c24xx if some GPIO banks not present   Ben Dooks
  • [PATCH] s3c24xx fix: freeze during suspend/resume on s3c24xx if some GPIO banks not present   Pinkava J.
• [PATCH] ARM: Continue removing useless bootmem.h includes   Russell King - ARM Linux
  • [PATCH] ARM: Continue removing useless bootmem.h includes   dwalker at codeaurora.org
• [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   tom.leiming at gmail.com
  • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Russell King - ARM Linux
    • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Ming Lei
      • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Russell King - ARM Linux
      • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Ming Lei
      • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Russell King - ARM Linux
      • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Ming Lei
      • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Russell King - ARM Linux
      • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Russell King - ARM Linux
      • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Ming Lei
      • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Russell King - ARM Linux
      • [RESEND PATCH] ARM: fix 'unannotated irqs-on' lockdep warning   Ming Lei
• please pull bjdooks' for-rmk/samsung3   Ben Dooks
• [PATCH 133/199] arch/arm/boot/bootp/bootp.lds: Checkpatch cleanup   Andrea Gelmini
• [PATCH 134/199] arch/arm/mach-clps711x/Makefile.boot: Checkpatch cleanup   Andrea Gelmini
• [PATCH 135/199] arch/arm/mach-footbridge/ebsa285-pci.c: Checkpatch cleanup   Andrea Gelmini
• [PATCH 136/199] arch/arm/mach-h720x/common.h: Checkpatch cleanup   Andrea Gelmini
• [PATCH 137/199] arch/arm/mach-sa1100/leds.c: Checkpatch cleanup   Andrea Gelmini
• [PATCH 138/199] arch/arm/mach-shark/pci.c: Checkpatch cleanup   Andrea Gelmini
• [PATCH 139/199] arch/arm/nwfpe/ChangeLog: Checkpatch cleanup   Andrea Gelmini
• [PATCH 140/199] arch/arm/nwfpe/fpsr.h: Checkpatch cleanup   Andrea Gelmini
• [PATCH 003/199] ARM mach-at91: duplicated include   Andrea Gelmini
• Samsung documentation updates   Ben Dooks
  • [PATCH 1/8] ARM: SAMSUNG: Documentation: update the list of SoCs supported   Ben Dooks
  • [PATCH 2/8] ARM: SAMSUNG: Documentation: update directory layout   Ben Dooks
  • [PATCH 3/8] ARM: S3C24XX: Documentation: update documentation overview   Ben Dooks
  • [PATCH 4/8] ARM: S3C24XX: Documentation: update GPIO documentation   Ben Dooks
  • [PATCH 7/8] ARM: SAMSUNG: Documentation: add documentation on GPIO code   Ben Dooks
  • [PATCH 8/8] ARM: SAMSUNG: gpio-cfg.h: update documentation   Ben Dooks
• [PATCH 5/8] ARM: S3C24XX: Documentation: add section on gpiolib changes   Ben Dooks
• [PATCH 6/8] ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()   Ben Dooks
• facing undefined inconsistent cache issues on cortex-a9   Shiraz HASHIM
  • facing undefined inconsistent cache issues on cortex-a9   Shilimkar, Santosh
    • facing undefined inconsistent cache issues on cortex-a9   Armando VISCONTI
      • facing undefined inconsistent cache issues on cortex-a9   Shilimkar, Santosh
      • facing undefined inconsistent cache issues on cortex-a9   Woodruff, Richard
• s3c_gpio registeration list   Ben Dooks
  • [PATCH] ARM: SAMSUNG: gpio: add list of gpios   Ben Dooks
• [PATCH 1/1] omap iommu: Make omap-iommu.o built-in   Hiroshi DOYU
• [PATCH 0/6] pxa: encode IRQ number into .nr_irqs (SPARSE IRQ)   Eric Miao
  • [PATCH 1/6] [ARM] pxa: select SPARSE_IRQ by default   Eric Miao
  • [PATCH 2/6] [ARM] pxa: encode IRQ number into .nr_irqs   Eric Miao
  • [PATCH 3/6] [ARM] pxa/hx4700: encode IRQ number into .nr_irqs   Eric Miao
  • [PATCH 4/6] [ARM] pxa/ezx: encode IRQ number into .nr_irqs   Eric Miao
  • [PATCH 5/6] [ARM] pxa/balloon3: encode number of IRQ into .nr_irqs   Eric Miao
  • [PATCH 6/6] [ARM] pxa/cm-x2xx: encode IRQ number into .nr_irqs   Eric Miao
    • [PATCH 6/6] [ARM] pxa/cm-x2xx: encode IRQ number into .nr_irqs   Mike Rapoport
      • [PATCH 6/6] [ARM] pxa/cm-x2xx: encode IRQ number into .nr_irqs   Eric Miao
• [PATCH] ARM: S5P: Fix the platform external interrupt issues.   Kukjin Kim
  • [PATCH] ARM: S5P: Fix the platform external interrupt issues.   Marek Szyprowski
• [PATCH] ARM: S5P6440: Add External Interrupt support   Kukjin Kim
  • [PATCH] ARM: S5P6440: Add External Interrupt support   Russell King - ARM Linux
  • [PATCH] ARM: S5P6440: Add External Interrupt support   Russell King - ARM Linux
• [PATCH 3/6] davinci: edma: clear events in edma_start()   stanley.miao
  • [PATCH 3/6] davinci: edma: clear events in edma_start()   Kevin Hilman
    • [PATCH 3/6] davinci: edma: clear events in edma_start()   stanley.miao
      • [PATCH 3/6] davinci: edma: clear events in edma_start()   Sudhakar Rajashekhara
      • [PATCH 3/6] davinci: edma: clear events in edma_start()   Kevin Hilman
      • [PATCH 3/6] davinci: edma: clear events in edma_start()   Kevin Hilman
• [PATCH] ARM: ux500 MTU clockrate correction   Linus Walleij
• [PATCH v2 0/3] Driver for the i.MX2x CMOS Sensor Interface   Baruch Siach
  • [PATCH v2 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Baruch Siach
    • [PATCH v2 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Sascha Hauer
      • [PATCH v2 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Baruch Siach
      • [PATCH v2 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Sascha Hauer
    • [PATCH v2 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Guennadi Liakhovetski
      • [PATCH v2 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Baruch Siach
      • [PATCH v2 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Guennadi Liakhovetski
  • [PATCH v2 2/3] mx27: add support for the CSI device   Baruch Siach
  • [PATCH v2 3/3] mx25: add support for the CSI device   Baruch Siach
  • [PATCH v2 0/3] Driver for the i.MX2x CMOS Sensor Interface   Guennadi Liakhovetski
    • [PATCH v2 0/3] Driver for the i.MX2x CMOS Sensor Interface   Baruch Siach
  • [PATCH v2 0/3] Driver for the i.MX2x CMOS Sensor Interface   Sascha Hauer
  • [PATCH v2 0/3] Driver for the i.MX2x CMOS Sensor Interface   Guennadi Liakhovetski
• [PATCH 1/7] nomadik-gpio: add function to configure pullup/pulldown   Rabin Vincent
  • [PATCH 2/7] nomadik-gpio: add function to configure sleep mode behaviour   Rabin Vincent
  • [PATCH 3/7] nomadik-gpio: refactor nmk_gpio_set_mode   Rabin Vincent
  • [PATCH 4/7] nomadik-gpio: add pin configuration API   Rabin Vincent
  • [PATCH 5/7] nomadik-gpio: switch to core_initcall   Rabin Vincent
  • [PATCH 6/7] ux500: add DB8500 pin configs   Rabin Vincent
  • [PATCH 7/7] mop500: add basic pin configuration   Rabin Vincent
• [PATCH 00/16] imx patches for 2.6.36   Uwe Kleine-König
  • [PATCH 01/16] arm/mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number   Uwe Kleine-König
    • [PATCH 01/16] arm/mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number   Fabio Estevam
      • [PATCH 01/16] arm/mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number   Uwe Kleine-König
  • [PATCH 02/16] arm/mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its arch number   Uwe Kleine-König
  • [PATCH 03/16] arm/mx1: add CONFIG_VIDEO_MX1 to defconfig   Uwe Kleine-König
  • [PATCH 04/16] arm/mx1: don't use deprecated symbol names   Uwe Kleine-König
  • [PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning   Uwe Kleine-König
    • [PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning   Wolfram Sang
      • [PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning   Uwe Kleine-König
      • [PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning   Wolfram Sang
      • [PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning   Uwe Kleine-König
  • [PATCH 06/16] arm/mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy   Uwe Kleine-König
  • [PATCH 07/16] arm/mx2/mx27_3ds: document alternative names and remove empty header   Uwe Kleine-König
  • [PATCH 08/16] arm/imx: remove empty and unused board headers   Uwe Kleine-König
  • [PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y   Uwe Kleine-König
    • [PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y   Eric Bénard
      • [PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y   Uwe Kleine-König
      • [PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y   Eric Bénard
  • [PATCH 10/16] arm/mx3/kzm_arm11_01: fold board header in its only user   Uwe Kleine-König
  • [PATCH 11/16] arm/mx2/mx21ads: fold board header in its only user   Uwe Kleine-König
  • [PATCH 12/16] arm/mx2/mx27ads: fold board header in its only user   Uwe Kleine-König
  • [PATCH 13/16] arm/mx3/qong: get rid of nearly empty header   Uwe Kleine-König
  • [PATCH 14/16] arm/mx3/mx31_3ds: fold board header in its only user   Uwe Kleine-König
    • [PATCH 14/16] arm/mx3/mx31_3ds: fold board header in its only user   Sascha Hauer
    • [PATCH 14/16] arm/mx3/mx31_3ds: fold board header in its only user   Alberto Panizzo
    • [PATCH 13/16 v2] arm/mx3/mx31_3ds: fold board header in its only user   Uwe Kleine-König
  • [PATCH 15/16] arm/mx3/mx31ads: fold board header in its only user   Uwe Kleine-König
  • [PATCH 16/16] arm/mxc: grammar fix   Uwe Kleine-König
• [PATCH v2] ARM: S5P6440: Add External Interrupt support   Kukjin Kim
• [PATCH 1/2] ARM: SAMSUNG: MMC: Fix build error when both DMA and PIO mode selected   Pinkava J.
  • [PATCH 2/2] ARM: Fix MMC power management on Acer n30 / n35   Pinkava J.
    • [PATCH 2/2] ARM: Fix MMC power management on Acer n30 / n35   Pinkava J.
  • [PATCH 1/2] ARM: SAMSUNG: MMC: Fix build error when both DMA and PIO mode selected   Ben Dooks
  • [PATCH 1/2] ARM: SAMSUNG: MMC: Fix build error when both DMA and PIO mode selected   Sergei Shtylyov
• samsung merge window over   Ben Dooks
  • samsung merge window over   Kukjin Kim
    • samsung merge window over   Russell King - ARM Linux
      • samsung merge window over   Ben Dooks
      • WARNING about next merge window (Re: samsung merge window over)   Russell King - ARM Linux
• [PATCH 6/6] [ARM] pxa/cm-x2xx: encode IRQ number into .nr_irqs   Mike Rapoport
  • [PATCH 6/6] [ARM] pxa/cm-x2xx: encode IRQ number into .nr_irqs   Eric Miao
    • [PATCH 6/6] [ARM] pxa/cm-x2xx: encode IRQ number into .nr_irqs   Mike Rapoport
• [PATCH] ARM:VFPv3:enable {d16-d31} access   DebBarma, Tarun Kanti
  • [PATCH] ARM:VFPv3:enable {d16-d31} access   Siarhei Siamashka
    • [PATCH] ARM:VFPv3:enable {d16-d31} access   DebBarma, Tarun Kanti
  • [PATCH] ARM:VFPv3:enable {d16-d31} access   Russell King - ARM Linux
    • [PATCH] ARM:VFPv3:enable {d16-d31} access   DebBarma, Tarun Kanti
      • [PATCH] ARM:VFPv3:enable {d16-d31} access   Russell King - ARM Linux
      • [PATCH] ARM:VFPv3:enable {d16-d31} access   DebBarma, Tarun Kanti
      • [PATCH] ARM:VFPv3:enable {d16-d31} access   Russell King - ARM Linux
      • [PATCH] ARM:VFPv3:enable {d16-d31} access   DebBarma, Tarun Kanti
• [PATCH 1/6] Driver for the watchdog timer on Freescale IMX2 (and later) processors.   Wolfram Sang
  • [PATCH 1/6] Driver for the watchdog timer on Freescale IMX2 (and later) processors.   Wim Van Sebroeck
• [patch 0/5] kirkwood openrd client audio support - v3   apatard at mandriva.com
  • [patch 3/5] cs42l51: add asoc driver   apatard at mandriva.com
    • [patch 3/5] cs42l51: add asoc driver   Mark Brown
      • [patch 3/5] cs42l51: add asoc driver   Arnaud Patard
      • [alsa-devel] [patch 3/5] cs42l51: add asoc driver   Mark Brown
  • [patch 4/5] orion/kirkwood: Add i2s support   apatard at mandriva.com
    • [patch 4/5] orion/kirkwood: Add i2s support   Nicolas Pitre
      • [patch 4/5] orion/kirkwood: Add i2s support   saeed bishara
      • [patch 4/5] orion/kirkwood: Add i2s support   Nicolas Pitre
      • [patch 4/5] orion/kirkwood: Add i2s support   Arnaud Patard
      • [patch 4/5] orion/kirkwood: Add i2s support   Nicolas Pitre
  • [patch 0/5] kirkwood openrd client audio support - v3   Mark Brown
    • [patch 0/5] kirkwood openrd client audio support - v3   Nicolas Pitre
      • [patch 0/5] kirkwood openrd client audio support - v3   Mark Brown
      • [patch 0/5] kirkwood openrd client audio support - v3   Nicolas Pitre
• [patch 1/5] orion/kirkwood: add audio functions.   apatard at mandriva.com
• [patch 2/5] openrd-client: initialise audio   apatard at mandriva.com
• [patch 5/5] kirkwood: Add audio support to openrd client platforms   apatard at mandriva.com
• vpack270 and sleep mode   Marek Vasut
  • vpack270 and sleep mode   237 Rumjantsev Egor (PROG)
    • vpack270 and sleep mode   Marek Vasut
      • vpack270 and sleep mode   237 Rumjantsev Egor (PROG)
    • vpack270 and sleep mode   Russell King - ARM Linux
      • vpack270 and sleep mode   Marek Vasut
      • vpack270 and sleep mode   237 Rumjantsev Egor (PROG)
      • vpack270 and sleep mode   Russell King - ARM Linux
      • vpack270 and sleep mode   237 Rumjantsev Egor (PROG)
      • vpack270 and sleep mode   Russell King - ARM Linux
      • vpack270 and sleep mode   237 Rumjantsev Egor (PROG)
      • vpack270 and sleep mode   Lothar Waßmann
      • vpack270 and sleep mode   237 Rumjantsev Egor (PROG)
• Fw: Re: [WATCHDOG] v2.6.35-rc1 patches   Wim Van Sebroeck
• Assorted mini-fixes for MX31   Daniel Mack
  • [PATCH 2/5] ARM: mx3: pxm043: fix compiler warning   Daniel Mack
  • [PATCH 3/5] ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI   Daniel Mack
  • [PATCH 4/5] ARM: mx3: mx31lilly: pass mc13783 SPI IRQ pin   Daniel Mack
  • [PATCH 5/5] ARM: mx3: update mx3_defconfig   Daniel Mack
  • Assorted mini-fixes for MX31   Daniel Mack
• [PATCH 1/5] ARM: mx3: pcm037: remove unused variable   Daniel Mack
• [PATCHv1 2.6.34] mx5: Add i2c to Freescale MX51 Babbage HW   Dinh.Nguyen at freescale.com
  • [PATCHv1 2.6.34] mx5: Add i2c to Freescale MX51 Babbage HW   Sascha Hauer
• Git pull request: ARM LPC32XX architecture   Kevin Wells
  • Git pull request: ARM LPC32XX architecture   Russell King - ARM Linux
    • Git pull request: ARM LPC32XX architecture   Kevin Wells
• zImage works, but not vmlinux   f. achkar
  • zImage works, but not vmlinux   Kristoffer Ericson
    • zImage works, but not vmlinux   f. achkar
      • zImage works, but not vmlinux   Kristoffer Ericson
      • zImage works, but not vmlinux   f. achkar
  • zImage works, but not vmlinux   Seth Forshee
  • zImage works, but not vmlinux   Nicolas Pitre
• [PATCH] ARM: TCM memory bug on newer compilers   Linus Walleij
  • [PATCH] ARM: TCM memory bug on newer compilers   Russell King - ARM Linux
    • [PATCH] ARM: TCM memory bug on newer compilers   Linus WALLEIJ
• [PATCH 2/2] ixp4xx/vulcan: add PCI support   Marc Zyngier
  • [PATCH 2/2] ixp4xx/vulcan: add PCI support   Krzysztof Halasa
• [PATCH] Kirkwood: Fix explanation of MPP45 for QNAP TS41x   Martin Michlmayr
• [PATCH] orion5x: Set links to solid on D-Link DNS-323   Martin Michlmayr
• [PATCH] Kirkwood: Fix explanation of MPP45 for QNAP TS41x   Nicolas Pitre
• [PATCH] nomadik-gpio: set val in ->direction_output()   Rabin Vincent
• [RFC PATCH v2 0/3] ep93xx i2s audio   Ryan Mallon
  • [RFC PATCH v2 0/3] ep93xx i2s audio   Chase Douglas
• [RFC PATCH v2 1/3] ep93xx i2s audio driver   Ryan Mallon
  • [alsa-devel] [RFC PATCH v2 1/3] ep93xx i2s audio driver   Liam Girdwood
  • [alsa-devel] [RFC PATCH v2 1/3] ep93xx i2s audio driver   Peter Ujfalusi
  • [RFC PATCH v2 1/3] ep93xx i2s audio driver   Chase Douglas
    • [RFC PATCH v2 1/3] ep93xx i2s audio driver   Lothar Waßmann
  • [RFC PATCH v2 1/3] ep93xx i2s audio driver   Mark Brown
• [RFC PATCH v2 2/3] ep93xx i2s core support   Ryan Mallon
• [RFC PATCH v2 3/3] ep93xx i2s audio snapper cl15 support   Ryan Mallon
• [PATCH v3 0/3] Driver for the i.MX2x CMOS Sensor Interface   Baruch Siach
  • [PATCH v3 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27   Baruch Siach
  • [PATCH v3 2/3] mx27: add support for the CSI device   Baruch Siach
  • [PATCH v3 3/3] mx25: add support for the CSI device   Baruch Siach
• request pull of bjdooks' for-linus/2634-git-updates   Ben Dooks
• 18bpp display on OMAP3   Patrick
  • 18bpp display on OMAP3   Sergey Lapin
  • 18bpp display on OMAP3   Vladimir Pantelic
• [PATCH 1/2] mx25: add platform code for imx-keypad   Baruch Siach
• [PATCH 2/2] mx25pdk: add keypad support   Baruch Siach
• [PATCH] atmel_serial: Atmel RS485 support v2   Nicolas Ferre
  • [PATCH] atmel_serial: Atmel RS485 support v2   Claudio Scordino
    • [PATCH] atmel_serial: Atmel RS485 support v2   Nicolas Ferre
      • [PATCH] atmel_serial: Atmel RS485 support v2   Wolfram Sang
      • [PATCH] atmel_serial: Atmel RS485 support v2   Claudio Scordino
      • [PATCH] atmel_serial: Atmel RS485 support v2   Haavard Skinnemoen
      • [PATCH] MAINTAINERS: some Atmel drivers change maintainer   Nicolas Ferre
      • [PATCH] MAINTAINERS: some Atmel drivers change maintainer   Haavard Skinnemoen
• [PATCH 2/5] pxa/vpac270: Add PMIC support   Eric Miao
• [PATCH 3/5] PXA DMA-capable PATA driver   Eric Miao
• [PATCH 4/5] pxa/vpac270: Convert to use PATA PXA driver   Eric Miao
• [PATCH 5/5] pxa/vpac270: Add VGA modes for ADV7125   Eric Miao
• debugging linux kernel on arm926ejs target   f. achkar
• [PATCH 7/17] arch/arm/common: Add missing spin_unlock_irqrestore   Julia Lawall
  • [PATCH 7/17] arch/arm/common: Add missing spin_unlock_irqrestore   Marek Vasut
    • [PATCH 7/17] arch/arm/common: Add missing spin_unlock_irqrestore   Russell King - ARM Linux
      • [PATCH 7/17] arch/arm/common: Add missing spin_unlock_irqrestore   Marek Vasut
• [PATCH] imx-ssi.c: fix I2S slave setup   Eric Bénard
  • [alsa-devel] [PATCH] imx-ssi.c: fix I2S slave setup   Mark Brown
    • [alsa-devel] [PATCH] imx-ssi.c: fix I2S slave setup   Eric Bénard
  • [PATCH] imx-ssi.c: fix I2S slave setup   Mark Brown
  • [PATCH] imx-ssi.c: fix I2S slave setup   Sascha Hauer
• [PATCH 1/7 v5] Introduce plat-tcc   Hans J. Koch
• [PATCH 2/7 v5] Add the clock framework for Telechips TCC8xxx processors.   Hans J. Koch
• [PATCH 0/7 v6] Add basic support for Telechips TCC8xxx SoCs   Hans J. Koch
  • [PATCH 1/7 v6] Introduce plat-tcc   Hans J. Koch
  • [PATCH 2/7 v6] Add the clock framework for Telechips TCC8xxx processors.   Hans J. Koch
  • [PATCH 3/7 v6] Introduce plat-tcc irq framework   Hans J. Koch
  • [PATCH 4/7 v6] Add TCC8xxx system timer   Hans J. Koch
  • [PATCH 5/7 v6] Basic IO mappings for mach-tcc8k   Hans J. Koch
  • [PATCH 6/7 v6] Add common platform devices for TCC8xxx SoCs   Hans J. Koch
  • [PATCH 7/7 v6] Add board support for Telechips TCC8000-SDK board   Hans J. Koch
• Controlling Driver Load Order   Robert Emanuele
  • Controlling Driver Load Order   Linus Walleij
    • Controlling Driver Load Order   Linus Walleij
    • Controlling Driver Load Order   Wolfram Sang
      • Controlling Driver Load Order   Robert Emanuele
      • Controlling Driver Load Order   Robert Emanuele
      • Controlling Driver Load Order   Wolfram Sang
      • Controlling Driver Load Order   Robert Emanuele
      • Controlling Driver Load Order   Wolfram Sang
      • Controlling Driver Load Order   Ryan Mallon
      • Controlling Driver Load Order   Wolfram Sang
      • Controlling Driver Load Order   Ryan Mallon
      • Controlling Driver Load Order   Wolfram Sang
• set machine type for MACH_TYPE_SMDK2450   f. achkar
  • set machine type for MACH_TYPE_SMDK2450   Ben Dooks
• [PATCH] sa1111: Prevent deadlock in resume path   Marek Vasut
  • [PATCH] sa1111: Prevent deadlock in resume path   Russell King - ARM Linux
    • [PATCH] sa1111: Prevent deadlock in resume path   Marek Vasut
      • [PATCH] sa1111: Prevent deadlock in resume path   Russell King - ARM Linux
      • [PATCH] sa1111: Prevent deadlock in resume path   Marek Vasut
      • [PATCH] sa1111: Prevent deadlock in resume path   Russell King - ARM Linux
      • [PATCH] sa1111: Prevent deadlock in resume path   Marek Vasut
      • [PATCH] sa1111: Prevent deadlock in resume path   Russell King - ARM Linux
      • [PATCH] sa1111: Prevent deadlock in resume path   Marek Vasut
      • [PATCH] sa1111: Prevent deadlock in resume path   Nicolas Pitre
• using openocd + gdb to debug linux kernel on arm926ejs   f. achkar
  • using openocd + gdb to debug linux kernel on arm926ejs   Steve Chen
    • using openocd + gdb to debug linux kernel on arm926ejs   f. achkar
      • using openocd + gdb to debug linux kernel on arm926ejs   Steve Chen
      • using openocd + gdb to debug linux kernel on arm926ejs   f. achkar
  • using openocd + gdb to debug linux kernel on arm926ejs   Kees Jongenburger
    • using openocd + gdb to debug linux kernel on arm926ejs   f. achkar
• [PATCH 2/4] soc/imx: add eukrea-tlv320   Eric Bénard
• [PATCH 3/4] eukrea_mbimx27: add audio codec   Eric Bénard
• [RFC PATCH] irq: handle private interrupt registration   adharmap at codeaurora.org
• defining ARM machine type properly   f. achkar
  • defining ARM machine type properly   Ben Dooks
    • defining ARM machine type properly   f. achkar
    • defining ARM machine type properly   f. achkar
      • defining ARM machine type properly   Ben Dooks
  • defining ARM machine type properly   Wan ZongShun
    • defining ARM machine type properly   f. achkar
• [PATCH] s3c2410_ts: restore s3c24xx ids   Vasily Khoruzhick
  • [PATCH] s3c2410_ts: restore s3c24xx ids   Ben Dooks
• [PATCH v2 1/8] i.MX27: add suspend to RAM support   Eric Bénard
  • [PATCH v2 2/8] mxc_nand: fix PM   Eric Bénard
    • [PATCH v2 3/8] imx_keypad: add PM support   Eric Bénard
      • [PATCH v2 4/8] eukrea_mbimx27: update keyboard platform data   Eric Bénard
      • [PATCH v2 5/8] serial/imx.c: fix suspend/resume   Eric Bénard
      • [PATCH v2 6/8] serial/imx: drvdata is sport and not &sport->port   Eric Bénard
      • [PATCH v2 7/8] net/fec: fix pm to survive to suspend/resume   Eric Bénard
      • [PATCH v2 8/8] imxfb: fix PM   Eric Bénard
      • [PATCH v2 7/8] net/fec: fix pm to survive to suspend/resume   Sergei Shtylyov
      • [PATCH v3] net/fec: fix pm to survive to suspend/resume   Eric Bénard
      • [PATCH v3] net/fec: fix pm to survive to suspend/resume   Fabio Estevam
      • [PATCH] net/fec: fix pm to survive to suspend/resume   Eric Bénard
      • [PATCH] net/fec: fix pm to survive to suspend/resume   David Miller
      • [PATCH v2] net/fec: fix pm to survive to suspend/resume   Eric Bénard
      • [PATCH v2 3/8] imx_keypad: add PM support   Alberto Panizzo
      • [PATCH] imx_keypad: add PM support   Eric Bénard
    • [PATCH] mxc_nand: fix PM   Eric Bénard
  • [PATCH v3] i.MX27: add suspend to RAM support   Eric Bénard
    • [PATCH v3] i.MX27: add suspend to RAM support   Russell King - ARM Linux
      • [PATCH v3] i.MX27: add suspend to RAM support   Eric Bénard
      • [PATCH v3] i.MX27: add suspend to RAM support   Russell King - ARM Linux
      • [PATCH v4] i.MX27: add suspend to RAM support   Eric Bénard
      • [PATCH v3] i.MX27: add suspend to RAM support   Eric Bénard
      • [PATCH v3] i.MX27: add suspend to RAM support   Russell King - ARM Linux
      • [PATCH v3] i.MX27: add suspend to RAM support   Wolfram Sang
• [PATCH] NUC900/rtc: change the waiting for device ready implement   Wan ZongShun
• SPARSEMEM support for Atmel AT91SAM9G45 and M10   Yegor Yefremov
  • SPARSEMEM support for Atmel AT91SAM9G45 and M10   Marek Vasut
    • SPARSEMEM support for Atmel AT91SAM9G45 and M10   Yegor Yefremov
• [PATCH] Add Compact Flash driver for Samsung SoCs   Kukjin Kim
  • [PATCH 1/4] ARM: S3C64XX: Add support for Compact Flash driver on SMDK6410   Kukjin Kim
    • [PATCH 1/4] ARM: S3C64XX: Add support for Compact Flash driver on SMDK6410   Ben Dooks
      • [PATCH 1/4] ARM: S3C64XX: Add support for Compact Flash driver on SMDK6410   Marek Szyprowski
    • [PATCH 1/4] ARM: S3C64XX: Add support for Compact Flash driver on SMDK6410   Russell King - ARM Linux
  • [PATCH 2/4] ARM: S5PV210: Add support for Compact Flash driver on SMDKV210/SMDKC110   Kukjin Kim
    • [PATCH 2/4] ARM: S5PV210: Add support for Compact Flash driver on SMDKV210/SMDKC110   Russell King - ARM Linux
  • [PATCH 3/4] ARM: S5PC100: Add support for Compact Flash driver on SMDKC100   Kukjin Kim
    • [PATCH 3/4] ARM: S5PC100: Add support for Compact Flash driver on SMDKC100   Russell King - ARM Linux
  • [PATCH 4/4] pata_samsung: Add Samsung PATA controller driver   Kukjin Kim
    • [PATCH 4/4] pata_samsung: Add Samsung PATA controller driver   Ben Dooks
    • [PATCH 4/4] pata_samsung: Add Samsung PATA controller driver   Jassi Brar
      • [PATCH 4/4] pata_samsung: Add Samsung PATA controller driver   Ben Dooks
      • [PATCH 4/4] pata_samsung: Add Samsung PATA controller driver   Jassi Brar
    • [PATCH 4/4] pata_samsung: Add Samsung PATA controller driver   Sergei Shtylyov
    • [PATCH 4/4] pata_samsung: Add Samsung PATA controller driver   Tejun Heo
• U6/U6715 ARM architecture files, 2nd try   Philippe Langlais
  • [PATCH 1/6] U6/U6715 ARM architecture files   Philippe Langlais
  • [PATCH 2/6] U6715 clocks gating management U6 clock generic driver & U6715 cgu clock specific (V2)   Philippe Langlais
  • [PATCH 3/6] U6715 gpio platform driver This driver is U6 platform generic (V2)   Philippe Langlais
  • [PATCH 4/6] U6715 platform serial driver It's a generic driver for all U6 platform (V2)   Philippe Langlais
  • [PATCH 5/6] U6715 8250 serial like driver   Philippe Langlais
  • [PATCH 6/6] U6715 Default configuration for ST-Ericsson reference design boards   Philippe Langlais
• [PATCH] mxc_nand: add support for platform defined partitions   Baruch Siach
  • [PATCH] mxc_nand: add support for platform defined partitions   Marc Kleine-Budde
• [PATCH v2 1/4] imx-ssi.c: add new choices to platform configuration   Eric Bénard
  • [PATCH v2 2/4] soc/imx: add eukrea-tlv320   Eric Bénard
    • [PATCH v2 3/4] eukrea_mbimx27: add audio codec   Eric Bénard
      • [PATCH v2 4/4] mx27_defconfig: add audio support for eukrea_mbimx27   Eric Bénard
      • [PATCH v2 3/4] eukrea_mbimx27: add audio codec   Liam Girdwood
      • [PATCH v2 3/4] eukrea_mbimx27: add audio codec   Sascha Hauer
      • [PATCH v2 3/4] eukrea_mbimx27: add audio codec   Eric Bénard
    • [PATCH v2 2/4] soc/imx: add eukrea-tlv320   Liam Girdwood
      • [PATCH v2 2/4] soc/imx: add eukrea-tlv320   Eric Bénard
      • [alsa-devel] [PATCH v2 2/4] soc/imx: add eukrea-tlv320   Liam Girdwood
  • [alsa-devel] [PATCH v2 1/4] imx-ssi.c: add new choices to platform configuration   Liam Girdwood
• [PULL REQ] IXP4xx (ARM): pull request   Krzysztof Halasa
• [patch 0/6] kirkwood openrd client audio support - v4   apatard at mandriva.com
  • [patch 1/6] orion/kirkwood: add audio functions.   apatard at mandriva.com
    • [patch 1/6] orion/kirkwood: add audio functions.   Nicolas Pitre
    • [patch 1/6] orion/kirkwood: add audio functions.   Mark Brown
      • [patch 0/4] Re: [patch 1/6] orion/kirkwood: add audio functions.   apatard at mandriva.com
      • [patch 1/4] orion/kirkwood: add audio functions.   apatard at mandriva.com
      • [patch 1/4] orion/kirkwood: add audio functions.   Mark Brown
      • [patch 3/4] kirkwood: Add i2s support   apatard at mandriva.com
      • [patch 4/4] kirkwood: Add audio support to openrd client platforms   apatard at mandriva.com
      • [patch 2/4] openrd-client: initialise audio   apatard at mandriva.com
  • [patch 2/6] openrd-client: initialise audio   apatard at mandriva.com
  • [patch 3/6] soc-dapm.h: add SND_SOC_DAPM_PRE_POST_PMD event   apatard at mandriva.com
    • [patch 3/6] soc-dapm.h: add SND_SOC_DAPM_PRE_POST_PMD event   Mark Brown
  • [patch 4/6] cs42l51: add asoc driver   apatard at mandriva.com
    • [patch 4/6] cs42l51: add asoc driver   Mark Brown
  • [patch 5/6] kirkwood: Add i2s support   apatard at mandriva.com
  • [patch 6/6] kirkwood: Add audio support to openrd client platforms   apatard at mandriva.com
  • [patch 0/6] kirkwood openrd client audio support - v4   Nicolas Pitre
  • [alsa-devel] [patch 0/6] kirkwood openrd client audio support - v4   Liam Girdwood
• Problem with at91_mci and AT91RM9200   Łukasz Góralczyk
  • Problem with at91_mci and AT91RM9200   zql at glomationinc.com
    • Problem with at91_mci and AT91RM9200   Łukasz Góralczyk
  • Problem with at91_mci and AT91RM9200   Łukasz Góralczyk
• [PATCH] rtc-s3c: Fix rtc-s3c driver initialization   Vasily Khoruzhick
  • [PATCH] rtc-s3c: Fix rtc-s3c driver initialization   Vasily Khoruzhick
• [PATCHv2 2.6.34 1/2] mx5: Add i2c to Freescale MX51 Babbage HW   Dinh.Nguyen at freescale.com
  • [PATCHv2 2.6.34 1/2] mx5: Add i2c to Freescale MX51 Babbage HW   Daniel Mack
• [PATCHv2 2.6.34 2/2] mx5: Register i2c on Freescale MX51 Babbage HW   Dinh.Nguyen at freescale.com
• [PATCH] OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU   Will Deacon
• [PATCH] ARM: change definition of cpu_relax() for ARM11MPCore   Will Deacon
  • [PATCH] ARM: change definition of cpu_relax() for ARM11MPCore   Shilimkar, Santosh
    • [PATCH] ARM: change definition of cpu_relax() for ARM11MPCore   Will Deacon
      • [PATCH] ARM: change definition of cpu_relax() for ARM11MPCore   Shilimkar, Santosh
• [not solved yet] debugging linux kernel on arm926ejs target   f. achkar
  • [not solved yet] debugging linux kernel on arm926ejs target   Russell King - ARM Linux
  • [not solved yet] debugging linux kernel on arm926ejs target   Madhu
• [PATCHv3 2.6.34 1/2] mx5: Add i2c to Freescale MX51 Babbage HW   Dinh.Nguyen at freescale.com
• [PATCHv3 2.6.34 2/2] mx5: Register i2c on Freescale MX51 Babbage HW   Dinh.Nguyen at freescale.com
• [PATCH v2] rtc-s3c: Fix rtc-s3c driver initialization   Vasily Khoruzhick
• Samsung ARM processors   f. achkar
  • Samsung ARM processors   Ben Dooks
• [PATCH] pxa/vpac270: Enable SparseMEM for 256 MB of RAM   Marek Vasut
• [GIT PULL] final dmaengine update for 2.6.35-rc1   Dan Williams
• [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Kyungmin Park
  • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Ben Dooks
    • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Kyungmin Park
      • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Ben Dooks
      • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Kyungmin Park
      • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Ben Dooks
      • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Kyungmin Park
      • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Ben Dooks
      • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Kyungmin Park
  • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Kukjin Kim
  • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Ben Dooks
    • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Kyungmin Park
      • [PATCH] s5pv210: Change the base ram address to 0x3000'0000   Kyungmin Park
• [PATCH] Updates for S3C HSOTG driver   Kukjin Kim
  • [PATCH 1/4] ARM: S3C64XX: Add USB OTG HCLK to the list of clocks   Kukjin Kim
  • [PATCH 2/4] ARM: S5PV210: Assign clock rate for clk_xusbxti clock.   Kukjin Kim
    • [PATCH 2/4] ARM: S5PV210: Assign clock rate for clk_xusbxti clock.   Ben Dooks
  • [PATCH 3/4] ARM: S5P: Add clk_xusbxti clock to the list of clocks to be registered.   Kukjin Kim
  • [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.   Kukjin Kim
    • [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.   Ben Dooks
    • [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.   Ben Dooks
      • [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.   Sergei Shtylyov
      • [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.   Ben Dooks
• Register WM8750   Marek Vasut
  • [PATCH 1/2] pxa/spitz: Correctly register WM8750   Marek Vasut
    • [PATCH 1/2] pxa/spitz: Correctly register WM8750   Eric Miao
  • [PATCH 2/2] pxa/z2: Register WM8750   Marek Vasut
• [PATCH 1/2] pxa/spitz: Correctly register WM8750   Marek Vasut
  • [PATCH 1/2] pxa/spitz: Correctly register WM8750   Pavel Machek
    • [PATCH 1/2] pxa/spitz: Correctly register WM8750   Eric Miao
      • [PATCH 1/2] pxa/spitz: Correctly register WM8750   Marek Vasut
  • [PATCH 1/2] pxa/spitz: Correctly register WM8750   Mark Brown
• [PATCH 2/2] pxa/z2: Register WM8750   Marek Vasut
  • [PATCH 2/2] pxa/z2: Register WM8750   Marek Vasut
• [PATCH] Add battery support into Zipit Z2   Marek Vasut
  • [PATCH] Add battery support into Zipit Z2   Marek Vasut
• GPIO updates for -next   Ben Dooks
  • [PATCH 01/15] ARM: SAMSUNG: Add GPIO configuration for a range of pins   Ben Dooks
    • [PATCH 01/15] ARM: SAMSUNG: Add GPIO configuration for a range of pins   Sergei Shtylyov
  • [PATCH 02/15] ARM: S3C64XX: Change dev-audio.c to use S3C_GPIO_SFN() for special functions   Ben Dooks
  • [PATCH 03/15] ARM: S3C64XX: Change to using s3c_gpio_cfgpin_range()   Ben Dooks
  • [PATCH 04/15] ARM: S5P6440: Change to using s3c_gpio_cfgpin_range()   Ben Dooks
  • [PATCH 05/15] ARM: S5P6442: Change to using s3c_gpio_cfgpin_range()   Ben Dooks
    • [PATCH 05/15] ARM: S5P6442: Change to using s3c_gpio_cfgpin_range()   Kyungmin Park
      • [PATCH 05/15] ARM: S5P6442: Change to using s3c_gpio_cfgpin_range()   Ben Dooks
      • [PATCH 05/15] ARM: S5P6442: Change to using s3c_gpio_cfgpin_range()   Ben Dooks
      • [PATCH 05/15] ARM: S5P6442: Change to using s3c_gpio_cfgpin_range()   Kyungmin Park
  • [PATCH 06/15] ARM: S5PC100: Change to using s3c_gpio_cfgpin_range()   Ben Dooks
  • [PATCH 07/15] ARM: S5PV210: Change to using s3c_gpio_cfgpin_range()   Ben Dooks
  • [PATCH 08/15] ARM: SAMSUNG: Add s3c_gpio_cfgall_range() function   Ben Dooks
    • [PATCH 08/15] ARM: SAMSUNG: Add s3c_gpio_cfgall_range() function   Sergei Shtylyov
  • [PATCH 09/15] ARM: S3C64XX: Change to using s3c_gpio_cfgall_range()   Ben Dooks
  • [PATCH 10/15] ARM: S5PC100: Change to using s3c_gpio_cfgall_range()   Ben Dooks
  • [PATCH 11/15] ARM: S5PV210: Change to using s3c_gpio_cfgall_range()   Ben Dooks
  • [PATCH 12/15] ARM: SAMSUNG: Add s3c_gpio_cfgrange_nopull() helper   Ben Dooks
  • [PATCH 13/15] ARM: S3C64XX: Change to using s3c_gpio_cfgrange_nopull()   Ben Dooks
  • [PATCH 14/15] ARM: S5PC100: Change to using s3c_gpio_cfgrange_nopull()   Ben Dooks
  • [PATCH 15/15] ARM: S5PV210: Change to using s3c_gpio_cfgrange_nopull()   Ben Dooks
• Samsung device updates   Ben Dooks
  • [PATCH 2/9] ARM: SAMSUNG: Remove s3c_i2c1_setname() calls for s3c2440-i2c   Ben Dooks
  • [PATCH 6/9] ARM: SAMSUNG: Add helper to clone and set platform data   Ben Dooks
  • [PATCH 7/9] ARM: SAMSUNG: Use s3c_set_platdata() helper   Ben Dooks
• [PATCH 1/9] ARM: SAMSUNG: Default s3c_device_i2c1   Ben Dooks
• [PATCH 3/9] ARM: SAMSUNG: Default s3c_device_i2c2 to s3c2440-i2c   Ben Dooks
• [PATCH 4/9] ARM: SAMSUNG: Default s3c_device_i2c0 to s3c2440-i2c   Ben Dooks
• [PATCH 5/9] ARM: SAMSUNG: Eliminate s3c2440-i2c renames   Ben Dooks
• [PATCH 8/9] ARM: S3C24XX: Use s3c_set_platdata() helper   Ben Dooks
• [PATCH 9/9] ARM: S3C64XX: Use s3c_set_platdata() helper   Ben Dooks
• [PATCH 1/2] ARM: S5PV210: Add OneNAND device to the GONI board   Joonyoung Shim
  • [PATCH 1/2] ARM: S5PV210: Add OneNAND device to the GONI board   Ben Dooks
    • [PATCH 1/2] ARM: S5PV210: Add OneNAND device to the GONI board   Kyungmin Park
• [PATCH 2/2] ARM: S5PV210: Add OneNAND device to the Aquila board   Joonyoung Shim
• DMA to static address   James
  • DMA to static address   Viresh KUMAR
• [PATCH] mxc_nand: Fix OOB accesses on i.MX27   Sascha Hauer
  • [PATCH] mxc_nand: Fix OOB accesses on i.MX27   Baruch Siach
• [PATCH 1/1] arm: mxc: utilise usecount field in clock operations   Amit Kucheria
• [PATCH] ARM: S5PV210: serial: Fix section mismatch warning   Joonyoung Shim
  • [PATCH] ARM: S5PV210: serial: Fix section mismatch warning   Ben Dooks
  • [PATCH] ARM: S5PV210: serial: Fix section mismatch warning   Ben Dooks
    • [PATCH] ARM: S5PV210: serial: Fix section mismatch warning   Joonyoung Shim
• please pull bjdooks' for-linus/2635-updates   Ben Dooks
• [PATCH 1/4] mx25: flexcan clock support   Marc Kleine-Budde
• [PATCH 2/4] mx25: Add flexcan devices   Marc Kleine-Budde
• [PATCH 3/4] mx35: adjust flexcan clock definition   Marc Kleine-Budde
• [PATCH 4/4] mx35: add flexcan devices   Marc Kleine-Budde
  • [PATCH 4/4] mx35: add flexcan devices   Hans J. Koch
    • [PATCH 4/4] mx35: add flexcan devices   Marc Kleine-Budde
• [PATCH 1/5] ARM: SAMSUNG: Add keypad device support   Joonyoung Shim
• [PATCH 2/5] ARM: S5PV210: Add keypad device helpers   Joonyoung Shim
  • [PATCH 2/5] ARM: S5PV210: Add keypad device helpers   Russell King - ARM Linux
• [PATCH 3/5] ARM: S5PV210: Add keypad device to the GONI board   Joonyoung Shim
• [PATCH 4/5] ARM: S5PV210: Add keypad device to the Aquila board   Joonyoung Shim
• [PATCH 5/5] input: samsung-keypad - Add samsung keypad driver   Joonyoung Shim
• [Solved] Re: [Openocd-development] debugging linux kernel on arm926ejs targetvia openocd-0.4.0   f. achkar
• [PATCH 1/2] at91sam9g20ek: add fixed-value regulator for wm8731   Dmitry Eremin-Solenikov
  • [PATCH 2/2] at91sam9g20ek: add fixed-value regulator for wm8731   Dmitry Eremin-Solenikov
• [PATCH] Fix AT91SAM9G20 reset   Peter Horton
• [PATCH 1/2] ARM: move SPEAr to use common mult/shift calculation code   Linus Walleij
• [PATCH 2/2] ARM: move IOP to use common mult/shift calculation code   Linus Walleij
• [PATCH] ARM: nomadik MTU to use dynamic shift and mult assignment   Linus Walleij
• [PATCH 2/2] ARM: ux500 make it possible to disable localtimers   Linus Walleij
• [PATCH] ARM: fix highmem with VIPT cache and DMA   Russell King - ARM Linux
  • [PATCH] ARM: fix highmem with VIPT cache and DMA   Nicolas Pitre
    • [PATCH] ARM: fix highmem with VIPT cache and DMA   Russell King - ARM Linux
      • [PATCH] ARM: fix highmem with VIPT cache and DMA   Russell King - ARM Linux
      • [PATCH] ARM: fix highmem with VIPT cache and DMA   Nicolas Pitre
      • [PATCH] ARM: fix highmem with VIPT cache and DMA   Russell King - ARM Linux
      • [PATCH] ARM: fix highmem with VIPT cache and DMA   Nicolas Pitre
• 2.6.34 hangs during boot on PB11MPCore   Bjoern Brandenburg
  • 2.6.34 hangs during boot on PB11MPCore   Daniel Mack
    • 2.6.34 hangs during boot on PB11MPCore   Bjoern Brandenburg
      • 2.6.34 hangs during boot on PB11MPCore   Bjoern Brandenburg
      • 2.6.34 hangs during boot on PB11MPCore   Bjoern Brandenburg
      • 2.6.34 hangs during boot on PB11MPCore   Catalin Marinas
      • 2.6.34 hangs during boot on PB11MPCore   Bjoern Brandenburg
      • 2.6.34 hangs during boot on PB11MPCore   Bjoern Brandenburg
      • 2.6.34 hangs during boot on PB11MPCore   Shilimkar, Santosh
      • 2.6.34 hangs during boot on PB11MPCore   Catalin Marinas
  • 2.6.34 hangs during boot on PB11MPCore   Linus Walleij
• [PATCH 5/5] input: samsung-keypad - Add samsung keypad driver   Joonyoung Shim
• [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Joonyoung Shim
  • [PATCH v2 2/5] ARM: S5PV210: Add keypad device helpers   Joonyoung Shim
  • [PATCH v2 3/5] ARM: S5PV210: Add keypad device to the GONI board   Joonyoung Shim
  • [PATCH v2 4/5] ARM: S5PV210: Add keypad device to the Aquila board   Joonyoung Shim
  • [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver   Joonyoung Shim
    • [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver   Marek Vasut
      • [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver   Ben Dooks
    • [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver   Joonyoung Shim
    • [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver   Ben Dooks
      • [PATCH v2 5/5] input: samsung-keypad - Add samsung keypad driver   Joonyoung Shim
  • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Marek Vasut
    • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Jassi Brar
      • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Ben Dooks
      • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Jassi Brar
      • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Ben Dooks
      • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Mark Brown
    • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Dmitry Torokhov
      • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Joonyoung Shim
  • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Kukjin Kim
    • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Marek Vasut
    • [PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support   Joonyoung Shim
• [PATCH v2 0/5] Add samsung keypad   Joonyoung Shim
• strange characters on serial port when booting kernel on at91sam9263 board   Martin Ereth
• [RFC PATCH] ARM: Add SSI Clock Adjustment for i.MX27 TO2   Stuart Longland
  • [RFC PATCH] ARM: Add SSI Clock Adjustment for i.MX27 TO2   Sascha Hauer
• [GIT PULL] pxa: fixes for v2.6.34-rc1   Eric Miao
  • [GIT PULL] pxa: fixes for v2.6.34-rc1   Bryan Wu
    • [GIT PULL] pxa: fixes for v2.6.34-rc1   Eric Miao
      • [GIT PULL] pxa: fixes for v2.6.34-rc1   Marek Vasut
• [PATCH v3 1/5] ARM: SAMSUNG: Add keypad device support   Joonyoung Shim
  • [PATCH v3 2/5] ARM: S5PV210: Add keypad device helpers   Joonyoung Shim
  • [PATCH v3 3/5] ARM: S5PV210: Add keypad device to the GONI board   Joonyoung Shim
  • [PATCH v3 4/5] ARM: S5PV210: Add keypad device to the Aquila board   Joonyoung Shim
  • [PATCH v3 5/5] input: samsung-keypad - Add samsung keypad driver   Joonyoung Shim
• [PATCH v3 0/5] Add samsung keypad   Joonyoung Shim
• [PATCHv2] mxc_nand: add support for platform defined partitions   Baruch Siach
• [PATCH 05/25] pxa3xx_nand: rework irq logic   Lei Wen
• [PATCH 11/29] mmp: add nand support to pxa168   Lei Wen
• [PATCH 08/25] mmp: add nand support to pxa168   Lei Wen
• i.MX SSI Kconfig fixes   Sascha Hauer
  • [PATCH 2/2] i.MX ssi: Add missing Kconfig entry for Phytec boards   Sascha Hauer
  • i.MX SSI Kconfig fixes   Liam Girdwood
• [PATCH 1/2] i.MX ssi: MX31ads sound support should depend on MACH_MX31ADS   Sascha Hauer
  • [PATCH 1/2] i.MX ssi: MX31ads sound support should depend on MACH_MX31ADS   Mark Brown
    • [PATCH 2/2] i.MX ssi: Add missing Kconfig entry for Phytec boards   Sascha Hauer
      • [PATCH 2/2] i.MX ssi: Add missing Kconfig entry for Phytec boards   Mark Brown
      • [PATCH 2/2] i.MX ssi: Add missing Kconfig entry for Phytec boards   Sascha Hauer
      • [PATCH 2/2] i.MX ssi: Add missing Kconfig entry for Phytec boards   Mark Brown
• [PATCH 0/6] Various s3c-fb updates   Pawel Osciak
  • [PATCH 1/6] s3c-fb: Fix various null references on framebuffer memory alloc failure   Pawel Osciak
  • [PATCH 3/6] s3c-fb: Add device name initialization.   Pawel Osciak
  • [PATCH 5/6] s3c-fb: Add support for display panning   Pawel Osciak
  • [PATCH 6/6] s3c-fb: Add wait for VSYNC ioctl   Pawel Osciak
    • [PATCH 6/6] s3c-fb: Add wait for VSYNC ioctl   Ben Dooks
• [PATCH 2/6] s3c-fb: Correct FRAMESEL1 bitfield defines for VIDINTCON0 register   Pawel Osciak
• [PATCH 4/6] s3c-fb: Separate S5PC100 and S5PV210 framebuffer driver data structures   Pawel Osciak
• about mxc-master   Sascha Hauer
  • about mxc-master   Daniel Mack
• [PATCH] ARM: nomadik MTU to use dynamic shift and mult assignment   Linus Walleij
• pxa-devel back-merge / cherry pick request   Daniel Mack
  • pxa-devel back-merge / cherry pick request   Russell King - ARM Linux
    • pxa-devel back-merge / cherry pick request   Daniel Mack
      • pxa-devel back-merge / cherry pick request   Mark Brown
      • pxa-devel back-merge / cherry pick request   Daniel Mack
      • pxa-devel back-merge / cherry pick request   Russell King - ARM Linux
  • pxa-devel back-merge / cherry pick request   Nicolas Pitre
  • pxa-devel back-merge / cherry pick request   Eric Miao
    • [PATCH] ARM: pxa/raumfeld: check charge state after resume   Daniel Mack
      • [PATCH] ARM: pxa/raumfeld: check charge state after resume   Eric Miao
    • pxa-devel back-merge / cherry pick request   Russell King - ARM Linux
• [PATCH 0/3] ARM: S3C64XX: DMA core patches   Maurus Cuelenaere
• [PATCH 1/3] ARM: S3C64XX: Add SDMA clocks   Maurus Cuelenaere
• [PATCH 2/3] ARM: S3C64XX: Add SDMA support to DMA core   Maurus Cuelenaere
  • [PATCH 2/3 v2] ARM: S3C64XX: Add SDMA support to DMA core   Maurus Cuelenaere
• [PATCH 3/3] ARM: S3C64XX: Stop and flush requests on freeing   Maurus Cuelenaere
• Samsung Crypto engine problems   Maurus Cuelenaere
• [PATCH] SAMSUNG: Fix unused variable warning in ADC driver   Mark Brown
• [PATCH] ixp4xx: Support the all multicast flag on the NPE devices.   Richard Cochran
  • [PATCH] ixp4xx: Support the all multicast flag on the NPE devices.   Krzysztof Halasa
    • [PATCH] ixp4xx: Support the all multicast flag on the NPE devices.   Richard Cochran
      • [PATCH] ixp4xx: Support the all multicast flag on the NPE devices.   Mikael Pettersson
      • [PATCH] ixp4xx: Support the all multicast flag on the NPE devices.   Krzysztof Halasa
• [PATCH] General fixes in the serial_rs485 structure   Claudio Scordino
  • [PATCH] General fixes in the serial_rs485 structure   Philippe De Muyter
    • [PATCH] General fixes in the serial_rs485 structure   Claudio Scordino
• [PATCH] ixp4xx: Support the all multicast flag on the NPE devices.   Krzysztof Halasa
• [PATCH] ixp4xx: add support for static flash partitions   Richard Cochran
• [PATCH 0/2] mc13783: add pwr button support   Philippe Rétornaz
  • [PATCH 1/2] mc13783: add power button support   Philippe Rétornaz
• [PATCH 2/2] mx31moboard: Add MC13783 power button support   Philippe Rétornaz
• BSE nanoengine git tree   Marcelo Jimenez
• [PATCH v2] ARM: S5PV210: Add Power Management Support   Kukjin Kim
  • [PATCH v2] ARM: S5PV210: Add Power Management Support   Ben Dooks
    • [PATCH v2] ARM: S5PV210: Add Power Management Support   Kyungmin Park
• [PATCH] ARM: S5PC100: Add Watchdog support for S5PC100   Kukjin Kim
  • [PATCH] ARM: S5PC100: Add Watchdog support for S5PC100   Ben Dooks
• [PATCH] ARM: S5P: Bug fix on external interrupt for S5P series   Kukjin Kim
• Support for multiple MSI with ARM platform   Pratyush Anand